| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: policy: preallocate inexact bins before xfrm_hash_rebuild reinsert
xfrm_hash_rebuild()'s first loop preallocates the bins/chains the reinsert
loop needs, so the reinsert (after hlist_del_rcu()) cannot allocate or
fail. But its guard is inverted: it skips policies with prefixlen <
threshold and preallocates for the rest.
prefixlen < threshold is exactly when policy_hash_bysel() returns NULL and
the reinsert takes the allocating xfrm_policy_inexact_insert() path. So the
loop preallocates for the exact policies (which never allocate) and skips
the inexact ones, whose bin/node is then allocated GFP_ATOMIC during
reinsert. On failure the error path only WARN_ONCE()s and continues,
leaving a poisoned bydst node; the next rebuild's hlist_del_rcu()
dereferences LIST_POISON2 and takes a GPF. Reachable under memory pressure,
deterministic via failslab.
Invert the guard so preallocation covers exactly the reinserted policies;
the reinsert then allocates nothing and cannot fail.
Crash:
Oops: general protection fault, probably for non-canonical address
0xfbd59c0000000024: 0000 [#1] SMP KASAN NOPTI
KASAN: maybe wild-memory-access in range [0xdead...]
...
Workqueue: events xfrm_hash_rebuild
RIP: 0010:xfrm_hash_rebuild+0x5b3/0x1190
RAX: dead000000000122 (LIST_POISON2 + offset)
...
Call Trace:
hlist_del_rcu (include/linux/rculist.h:599)
xfrm_hash_rebuild (net/xfrm/xfrm_policy.c:1365)
process_one_work (kernel/workqueue.c:3322)
worker_thread (kernel/workqueue.c:3486)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
...
Kernel panic - not syncing: Fatal exception in interrupt |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm6: clear dst.dev on error to avoid double netdev_put in xfrm6_fill_dst()
On the error path where in6_dev_get(dev) returns NULL, xfrm6_fill_dst()
releases the device reference with netdev_put() but leaves
xdst->u.dst.dev set. dst_destroy() later calls netdev_put(dst->dev)
again, so the same net_device reference is released twice, underflowing
its refcount (ref_tracker WARNING + "unregister_netdevice: waiting for
<dev> to become free").
Clear xdst->u.dst.dev after the netdev_put(), the same way the XFRM
device-offload paths xfrm_dev_state_add() and xfrm_dev_policy_add() in
net/xfrm/xfrm_device.c NULL ->dev when releasing the reference on error.
ref_tracker: reference already released.
ref_tracker: allocated in:
xfrm6_fill_dst (net/ipv6/xfrm6_policy.c:86)
...
udpv6_sendmsg (net/ipv6/udp.c:1696)
...
ref_tracker: freed in:
xfrm6_fill_dst (net/ipv6/xfrm6_policy.c:90)
...
WARNING: lib/ref_tracker.c:322 at ref_tracker_free+0x58b/0x780
dst_destroy (net/core/dst.c:115)
rcu_core
handle_softirqs
... |
| Ghost is a Node.js content management system. From 5.26.0 until 6.54.1, the Universal Import feature in Ghost Admin failed to properly sanitize imported content resulting in XSS in post content. This issue is fixed in version 6.54.1. |
| A pre-authentication attacker could leverage unbounded symbol value caching to cause resource exhaustion leading to denial of service.
This issue affects Apache Qpid ProtonJ2: through 1.1.0.
Users are recommended to upgrade to version 1.2.0, which fixes the issue. |
| A pre-authentication attacker could leverage type nesting to cause a StackOverflowError potentially leading to denial of service.
This issue affects Apache Qpid ProtonJ2: through 1.1.0.
Users are recommended to upgrade to version 1.2.0, which fixes the issue. |
| Pluck CMS through 4.7.21 restricts dangerous file uploads in its admin file-management feature using a fixed blacklist in data/inc/files.php ('.php','php3','php4','php5','php6','php7','phtml','.phtm','.pht','.ph3','.ph4','.ph5','.asp','.cgi','.phar'), checked against the last 4-5 characters of the filename. The blacklist omits the '.php8' extension. An authenticated administrator can upload a file named e.g. shell.php8, which is stored unmodified and, on servers running PHP 8.x, is executed as PHP by the web server, resulting in remote code execution. |
| Crater isolates data per company_id, and its Invoice/Estimate/Payment/Expense policies enforce both a Bouncer ability check and $user->hasCompany($model->company_id). CustomerPolicy's view/update/delete methods omit the company-ownership check entirely, checking only the blanket ability. Route-model-bound customer lookups and the bulk Customer::deleteCustomers() method are similarly unscoped (self::find($id) with no company filter). Any authenticated user of one company can read, reassign (steal), or delete another company's customer records, with deletion cascading to that customer's invoices and payments. |
| eParakstītājs 3.0 for Windows before version
1.10.0 retrieves and executes its automatic updates over a channel that is not
authenticated or integrity-protected. On each launch the application fetches an
update descriptor (XML) over TLS but accepts any TLS certificate (a permissive
TrustManager and a HostnameVerifier that always returns true), does not verify
any digital signature on the update descriptor, and does not verify the
Authenticode signature or a checksum of the downloaded installer before running
it. A man-in-the-middle attacker able to redirect www.eparaksts.lv can serve a
crafted update descriptor pointing to an attacker-controlled executable, which
the client downloads and executes, resulting in arbitrary code execution on the
victim host. |
| changedetection.io's REST API resources are protected by an @auth.check_token decorator validating the caller's x-api-key header, except the Spec resource registered at /api/v1/full-spec (changedetectionio/api/Spec.py), whose get() method carries neither @auth.check_token nor @validate_openapi_request. An unauthenticated client can retrieve the full merged OpenAPI schema (all endpoint paths, parameters, and registered processor plugins) even when API access control is enabled and every sibling /api/v1/* route correctly requires the key. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: compress: fix to avoid use-after-free on dic
Call trace:
__memcpy+0x128/0x250
f2fs_read_multi_pages+0x940/0xf7c
f2fs_mpage_readpages+0x5a8/0x624
f2fs_readahead+0x5c/0x110
page_cache_ra_unbounded+0x1b8/0x590
do_sync_mmap_readahead+0x1dc/0x2e4
filemap_fault+0x254/0xa8c
f2fs_filemap_fault+0x2c/0x104
__do_fault+0x7c/0x238
do_handle_mm_fault+0x11bc/0x2d14
do_mem_abort+0x3a8/0x1004
el0_da+0x3c/0xa0
el0t_64_sync_handler+0xc4/0xec
el0t_64_sync+0x1b4/0x1b8
In f2fs_read_multi_pages(), once f2fs_decompress_cluster() was called if
we hit cached page in compress_inode's cache, dic may be released, it needs
break the loop rather than continuing it, in order to avoid accessing
invalid dic pointer. |
| A pre-authentication attacker could leverage type nesting to cause a StackOverflowError potentially leading to denial of service.
This issue affects Apache Qpid Broker-J: through 10.0.1.
Users are recommended to upgrade to version 10.1.0, which fixes the issue. |
| The MultiVendorX WordPress plugin before 5.0.11 does not verify that the store targeted through its REST API belongs to the requesting vendor, allowing an authenticated vendor (Store Owner and above) to view, take over, permanently delete, or modify any other vendor's store on the marketplace. |
| The MultiVendorX WordPress plugin before 5.0.11 does not verify that the requested store belongs to the current user in one of its REST API endpoints, allowing any vendor-level user to read other vendors' commission and financial data. |
| In the Linux kernel, the following vulnerability has been resolved:
ibmvnic: fix race between xmit and reset
There is a race between reset and the transmit paths that can lead to
ibmvnic_xmit() accessing an scrq after it has been freed in the reset
path. It can result in a crash like:
Kernel attempted to read user page (0) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000000
Faulting instruction address: 0xc0080000016189f8
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP [c0080000016189f8] ibmvnic_xmit+0x60/0xb60 [ibmvnic]
LR [c000000000c0046c] dev_hard_start_xmit+0x11c/0x280
Call Trace:
[c008000001618f08] ibmvnic_xmit+0x570/0xb60 [ibmvnic] (unreliable)
[c000000000c0046c] dev_hard_start_xmit+0x11c/0x280
[c000000000c9cfcc] sch_direct_xmit+0xec/0x330
[c000000000bfe640] __dev_xmit_skb+0x3a0/0x9d0
[c000000000c00ad4] __dev_queue_xmit+0x394/0x730
[c008000002db813c] __bond_start_xmit+0x254/0x450 [bonding]
[c008000002db8378] bond_start_xmit+0x40/0xc0 [bonding]
[c000000000c0046c] dev_hard_start_xmit+0x11c/0x280
[c000000000c00ca4] __dev_queue_xmit+0x564/0x730
[c000000000cf97e0] neigh_hh_output+0xd0/0x180
[c000000000cfa69c] ip_finish_output2+0x31c/0x5c0
[c000000000cfd244] __ip_queue_xmit+0x194/0x4f0
[c000000000d2a3c4] __tcp_transmit_skb+0x434/0x9b0
[c000000000d2d1e0] __tcp_retransmit_skb+0x1d0/0x6a0
[c000000000d2d984] tcp_retransmit_skb+0x34/0x130
[c000000000d310e8] tcp_retransmit_timer+0x388/0x6d0
[c000000000d315ec] tcp_write_timer_handler+0x1bc/0x330
[c000000000d317bc] tcp_write_timer+0x5c/0x200
[c000000000243270] call_timer_fn+0x50/0x1c0
[c000000000243704] __run_timers.part.0+0x324/0x460
[c000000000243894] run_timer_softirq+0x54/0xa0
[c000000000ea713c] __do_softirq+0x15c/0x3e0
[c000000000166258] __irq_exit_rcu+0x158/0x190
[c000000000166420] irq_exit+0x20/0x40
[c00000000002853c] timer_interrupt+0x14c/0x2b0
[c000000000009a00] decrementer_common_virt+0x210/0x220
--- interrupt: 900 at plpar_hcall_norets_notrace+0x18/0x2c
The immediate cause of the crash is the access of tx_scrq in the following
snippet during a reset, where the tx_scrq can be either NULL or an address
that will soon be invalid:
ibmvnic_xmit()
{
...
tx_scrq = adapter->tx_scrq[queue_num];
txq = netdev_get_tx_queue(netdev, queue_num);
ind_bufp = &tx_scrq->ind_buf;
if (test_bit(0, &adapter->resetting)) {
...
}
But beyond that, the call to ibmvnic_xmit() itself is not safe during a
reset and the reset path attempts to avoid this by stopping the queue in
ibmvnic_cleanup(). However just after the queue was stopped, an in-flight
ibmvnic_complete_tx() could have restarted the queue even as the reset is
progressing.
Since the queue was restarted we could get a call to ibmvnic_xmit() which
can then access the bad tx_scrq (or other fields).
We cannot however simply have ibmvnic_complete_tx() check the ->resetting
bit and skip starting the queue. This can race at the "back-end" of a good
reset which just restarted the queue but has not cleared the ->resetting
bit yet. If we skip restarting the queue due to ->resetting being true,
the queue would remain stopped indefinitely potentially leading to transmit
timeouts.
IOW ->resetting is too broad for this purpose. Instead use a new flag
that indicates whether or not the queues are active. Only the open/
reset paths control when the queues are active. ibmvnic_complete_tx()
and others wake up the queue only if the queue is marked active.
So we will have:
A. reset/open thread in ibmvnic_cleanup() and __ibmvnic_open()
->resetting = true
->tx_queues_active = false
disable tx queues
...
->tx_queues_active = true
start tx queues
B. Tx interrupt in ibmvnic_complete_tx():
if (->tx_queues_active)
netif_wake_subqueue();
To ensure that ->tx_queues_active and state of the queues are consistent,
we need a lock which:
- must also be taken in the interrupt path (ibmvnic_complete_tx())
- shared across the multiple
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa/mlx5: add validation for VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command
When control vq receives a VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command
request from the driver, presently there is no validation against the
number of queue pairs to configure, or even if multiqueue had been
negotiated or not is unverified. This may lead to kernel panic due to
uninitialized resource for the queues were there any bogus request
sent down by untrusted driver. Tie up the loose ends there. |
| changedetection.io's /settings save handler builds an update dict from form.data['application'] and blind-merges it into the stored application settings via .update(). Because WTForms represents an unchecked checkbox as False rather than 'unchanged', and only the 'password' field is special-cased against this problem, a POST to /settings that omits the api_access_token_enabled field (e.g. a minimal scripted request) silently disables API key enforcement for the entire REST API, exposing the full watch list, history, and configuration to unauthenticated requests. |
| A flaw was found in GStreamer's RealMedia demuxer in the gst-plugins-ugly package. When processing a RealMedia file containing a specially crafted FILEINFO metadata section, the demuxer parses variable-name and variable-value pairs using re_skip_pascal_string() without validating that offsets remain within the mapped buffer. Additionally, the element count controlling the parsing loop is read from attacker-controlled data without validation, which can cause an infinite loop. A crafted RealMedia file can cause the application to crash, hang, or potentially read limited adjacent memory contents. |
| A vulnerability was found in the GStreamer RealMedia demuxer (gst-plugins-ugly). When processing a RealMedia (.rm) file, the demuxer parses MDPR (media properties) chunks to configure audio streams. For audio stream header versions 4 and 5, the parser reads fields such as codec type, packet size, sample rate, channel count, and extra codec data length from fixed offsets within the chunk without first checking that the chunk contains enough data. If a malicious file provides an MDPR chunk that is too small to contain a complete audio stream header, the parser reads beyond the end of the buffer. This can cause the application to crash. In some cases, bytes read past the buffer boundary may be incorporated into stream metadata, which could result in limited information disclosure. |
| Cross-Site request forgery (CSRF) vulnerability in Melapress WP Activity Log and Melapress WP Activity Log Premium allows Cross Site Request Forgery.
This issue affects WP Activity Log: through 5.6.4; WP Activity Log Premium: through 5.6.4. |
| Leantime through 3.6.2 exposes the JSON-RPC methods leantime.rpc.TwoFA.TwoFA.getSetupData, saveSecret, verifyAndEnable, and disable2FA, which act on a caller-supplied userId parameter with no ownership check, session pinning, or permission-attribute gate (unlike other RPC-exposed methods in the same dispatcher). Any authenticated user can invoke getSetupData with an arbitrary userId to read that user's live TOTP secret, or disable2FA to strip another account's two-factor authentication entirely, fully defeating account-level 2FA protection. This is related to CVE-2026-15509, which covers a similar missing-authorization pattern in the JSON-RPC editUser/addUser role-assignment path in the same application; the TwoFA service methods addressed here are a distinct, independently fixable set of RPC endpoints. |
