| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Out of bounds read and write in ANGLE in Google Chrome on Android prior to 150.0.7871.182 allowed a remote attacker to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| NIOSSLCertificate._subjectAlternativeNames provides access to the raw bytes for a cert's SANs. NIOSSL provides access to a buffer assumed to be backed by an ASN1_STRING, but not all SANs are backed by ASN1_STRING, so accessing the buffer for such a type can lead to out-of-bounds memory access. This vulnerability is addressed in swift-nio-ssl version 2.37.2. |
| A weakness has been identified in mz-automation libiec61850 up to 1.6.1. This issue affects the function checkDataSetAccess of the file src/iec61850/server/mms_mapping/mms_mapping.c of the component MMS Request Handler. This manipulation causes out-of-bounds read. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. Upgrading to version 1.6.2 is capable of addressing this issue. Patch name: 062062daf4cb50c7aa76e01d6fb4d58fc9278a7d. Upgrading the affected component is recommended. The vendor was contacted early about this disclosure. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - bound the F3A keymap to the GPIO count
rmi_f3a_initialize() takes the GPIO count from the device query register
(f3a->gpio_count = buf & RMI_F3A_GPIO_COUNT, range 0..127).
rmi_f3a_map_gpios() then allocates gpio_key_map with
min(gpio_count, TRACKSTICK_RANGE_END) == at most 6 entries, but
rmi_f3a_attention() iterates the full gpio_count and dereferences
gpio_key_map[i], and input->keycodemax is set to the full gpio_count
while input->keycode points at the 6-entry allocation.
A device that reports gpio_count > 6 therefore causes an out-of-bounds
read of gpio_key_map[] on every attention interrupt, and out-of-bounds
accesses through the input core's default keymap ioctls: EVIOCGKEYCODE
reads past the buffer (leaking adjacent slab memory to user space) and
EVIOCSKEYCODE writes a caller-controlled value past it, for any process
able to open the evdev node, since input_default_getkeycode() and
input_default_setkeycode() only bound the index against keycodemax.
Size the keymap for the full gpio_count. The mapping loop is unchanged:
it still assigns only the first min(gpio_count, TRACKSTICK_RANGE_END)
entries; the remaining slots stay KEY_RESERVED (devm_kcalloc zero-fills)
and are skipped when reporting. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ebtables: module names must be null-terminated
We need to explicitly check the length, else we may pass non-null
terminated string to request_module(). |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix WEP length underflow and OOB read in OnAuth()
OnAuth() has two bugs in the shared-key authentication path.
When the Privacy bit is set, rtw_wep_decrypt() is called without
verifying that the frame is long enough to contain a valid WEP IV and
ICV. Inside rtw_wep_decrypt(), length is computed as:
length = len - WLAN_HDR_A3_LEN - iv_len
and then passed as (length - 4) to crc32_le(). If len is less than
WLAN_HDR_A3_LEN + iv_len + icv_len (32 bytes), length - 4 is negative
and, after the implicit cast to size_t, causes crc32_le() to read far
beyond the frame buffer. Add a minimum length check before accessing
the IV field and calling the decryption path.
When processing a seq=3 response, rtw_get_ie() stores the Challenge
Text IE length in ie_len, but the subsequent memcmp() always reads 128
bytes regardless of ie_len. IEEE 802.11 mandates a challenge text of
exactly 128 bytes; reject any IE whose length field differs, matching
the check already applied to OnAuthClient(). |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix out-of-bounds read in broadcast Gap ACK blocks
A broadcast PROTOCOL/STATE_MSG can carry a Gap ACK blocks record in its
data area. tipc_get_gap_ack_blks() only verifies that the record's len
field is self-consistent with its ugack_cnt/bgack_cnt counts
(sz == struct_size(p, gacks, ugack_cnt + bgack_cnt)); it does not check
that the record actually fits in the message data area, msg_data_sz().
The unicast caller tipc_link_proto_rcv() bounds it ("if (glen > dlen)
break;"), but the broadcast caller tipc_bcast_sync_rcv() discards the
returned size, so tipc_link_advance_transmq() copies the record off the
receive skb with an attacker-controlled count:
this_ga = kmemdup(ga, struct_size(ga, gacks, ga->bgack_cnt),
GFP_ATOMIC);
A TIPC neighbour that negotiated TIPC_GAP_ACK_BLOCK triggers it with one
ordinary broadcast STATE_MSG (msg_bc_ack_invalid() clear), sized so its
data area is short, carrying a Gap ACK record with len = 0x400,
bgack_cnt = 0xff and ugack_cnt = 0. len then equals
struct_size(p, gacks, 255), so the consistency check passes and ga is
non-NULL; kmemdup() reads struct_size(ga, gacks, 255) = 1024 bytes out
of the much smaller skb:
BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x48/0x60
Read of size 1024 at addr ffff0000c7030d38 by task poc864/69
Call trace:
kmemdup_noprof+0x48/0x60
tipc_link_advance_transmq+0x86c/0xb80
tipc_link_bc_ack_rcv+0x19c/0x1e0
tipc_bcast_sync_rcv+0x1c4/0x2c4
tipc_rcv+0x85c/0x1340
tipc_l2_rcv_msg+0xac/0x104
The buggy address belongs to the object at ffff0000c7030d00
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 56 bytes inside of
allocated 704-byte region [ffff0000c7030d00, ffff0000c7030fc0)
The copied-out bytes are subsequently consumed as gap/ack values, but
the read is already out of bounds at the kmemdup() regardless of how
they are used.
The unicast STATE path drops such a message: "if (glen > dlen) break;"
skips the rest of STATE_MSG handling and the skb is freed. Make the
broadcast path drop it too. tipc_bcast_sync_rcv() now bounds the record
against msg_data_sz() and, when it does not fit, reports it back through
tipc_node_bc_sync_rcv() to tipc_rcv() so the skb is discarded rather than
processed. ga is not cleared on this path: ga == NULL already means
"legacy peer without Selective ACK", a distinct legitimate state. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: function: rndis: add length check for header
Add a length check for the rndis header in rndis_rm_hdr, to ensure that
MessageType, MessageLength, DataOffset, and DataLength fields are
present before they are accessed. |
| FreeRDP before 3.29.0 contains out-of-bounds read vulnerabilities in the async update message proxy for the PolygonSC and PolygonCB primary drawing orders. When AsyncUpdate is enabled (e.g., xfreerdp /async-update), update_message_PolygonSC() and update_message_PolygonCB() allocate a fresh points array but copy point data from the address of the order structure instead of from polygonSC->points / polygonCB->points, resulting in a client-side out-of-bounds read. A malicious or compromised RDP server sending crafted PolygonSC/PolygonCB update orders can trigger memory disclosure or a client crash. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB reads in is_ap_in_tkip() IE loop
The loop in is_ap_in_tkip() iterates over IEs without verifying that
enough bytes remain before dereferencing the IE header or its payload:
- pIE->element_id and pIE->length are read without checking that
i + sizeof(*pIE) <= ie_length, so a truncated IE at the end of the
buffer causes an OOB read.
- For WLAN_EID_VENDOR_SPECIFIC the code compares pIE->data + 12,
which requires pIE->length >= 16. For WLAN_EID_RSN it compares
pIE->data + 8, requiring pIE->length >= 12. Neither requirement
is checked.
Add the missing IE header and payload bounds checks and guard each
data access with an explicit pIE->length minimum, matching the
pattern established in update_beacon_info(). |
| The DHCPv4 client helper net_dhcpv4_msg_type_name() in subsys/net/lib/dhcpv4/dhcpv4.c indexes a static 8-element const char * name table after a faulty bounds check. The guard used msg_type <= sizeof(name) instead of msg_type <= ARRAY_SIZE(name); sizeof returns the byte size of the pointer array (32 on 32-bit, 64 on 64-bit targets) rather than the element count of 8, so message-type values from 9 up to that byte size pass the check and cause name[msg_type - 1] to read past the end of the array.
The msg_type value originates from the DHCP MESSAGE TYPE option, which is read as an unchecked raw byte from a received packet (net_pkt_read_u8) and passed unmodified into the lookup. A DHCP server, or any host able to inject a spoofed DHCP reply onto the client's link, can therefore drive the index out of bounds. The out-of-range slot yields a garbage const char * that is then dereferenced by a %s log conversion.
The lookup is reached only from a debug log statement (NET_DBG / LOG_DBG), so the out-of-bounds read is triggerable only when the DHCPv4 log module is built at DEBUG level (CONFIG_NET_DHCPV4_LOG_LEVEL_DBG), which is not the default configuration. When that condition holds, the result is an out-of-bounds read and a wild-pointer dereference: most likely a crash of the DHCP client (denial of service) and potentially disclosure of an adjacent pointer's contents through the log output. The fix replaces sizeof with ARRAY_SIZE, restoring the correct 1..8 acceptance window. |
| FreeRDP before 3.29.0 contains an out-of-bounds heap read vulnerability in the UVC H.264 extension-unit parser that fails to validate descriptor length before accessing the GUID field. A local attacker with a malicious USB video camera can trigger a heap read beyond allocated bounds during camera stream setup, causing denial of service. |
| FreeRDP versions 3.28.0 and earlier contain an out-of-bounds read vulnerability in the RDP6 planar RLE bitmap decoder functions planar_decompress_plane_rle and planar_decompress_plane_rle_only in libfreerdp/codec/planar.c. Only the 1-byte control byte is bounds-checked; the subsequent 0–15 attacker-declared raw bytes are read without validating that the source buffer contains them. A malicious or compromised RDP server can send a truncated planar-encoded bitmap or surface update (reachable via both the Bitmap Update PDU and RDPGFX Surface Command paths) that causes the client to read past the end of the source buffer. The issue is fixed in FreeRDP 3.29.0. |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in iOS 26.6 and iPadOS 26.6, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. An attacker with physical access to a locked device may be able to view sensitive user information. |
| The ACSE layer contains a flaw in the processing of AARQ PDUs during MMS
connection establishment. When parsing certain fields within the
calling AP title, an attacker controlled length value of zero or one may
cause the parser to read past the end of a heap buffer. |
| The MMS server connection handler contains a flaw in its processing of
BER-encoded request data. When an MMS confirmed request PDU containing
an extended BER tag is received over an established session, the decoder
may advance its internal buffer incorrectly due to a missing bounds
check. This results in a one byte heap out-of-bounds read and causes the
MMS service process to terminate, leading to a denial-of-service
condition. |
| FreeRDP before 3.29.0 contains a heap out-of-bounds read vulnerability in the TSMF FFmpeg decoder when parsing AVC1 MPEG2VIDEOINFO media types with insufficient ExtraData. Attackers can send malformed media format data from a server to trigger a crash by reading fixed offsets without validating source buffer length. |
| FreeRDP before 3.29.0 (affected versions <= 3.28.0) contains a heap out-of-bounds read in update_process_glyph_fragments()/glyph_cache_fragment_put() in libfreerdp/cache/glyph.c. When handling a GLYPH_FRAGMENT_ADD update, the code reads a one-byte server-controlled declared fragment size but does not verify it fits within the remaining received buffer before allocating and copying that many bytes. A malicious RDP server can send a short fragment with an oversized declared size, causing the client to read beyond the allocated buffer, resulting in an out-of-bounds read and client crash. |
| The OCPP 1.6 client in subsys/net/lib/ocpp parsed inbound WAMP RPC frames in parse_rpc_msg() (subsys/net/lib/ocpp/ocpp_j.c) using a hand-rolled helper, extract_string_field(), that copied the message's uid and action fields with strncpy(out_buf, token + 1, outlen - 1) and then scanned the result with strchr(out_buf, '"'). Because strncpy does not NUL-terminate the destination when the source is at least outlen - 1 (127) bytes long, the subsequent strchr reads past the 128-byte destination buffer into adjacent stack memory; if a " byte is found beyond the buffer, a one-byte out-of-bounds NUL write also occurs. A related defect in extract_payload() runs strchr/strrchr over the receive buffer, which may not be NUL-terminated when a maximal-length frame fills it.
The parsed bytes come directly from the OCPP central-system server over a websocket: the reader thread fills recv_buf via websocket_recv_msg() and calls parse_rpc_msg() on each inbound DATA frame (subsys/net/lib/ocpp/ocpp.c). A malicious or compromised central server, or an on-path attacker (OCPP is commonly deployed over plain ws://), can send an RPC frame whose uid or action field is 127+ bytes with no closing quote, triggering the out-of-bounds access.
The primary impact is a remotely triggerable denial of service: the unbounded scan can fault on an unmapped page, and the stray NUL write can corrupt adjacent stack state. The over-read data is not reflected to the peer, so disclosure is limited. The feature is EXPERIMENTAL and must be explicitly enabled (CONFIG_OCPP). The fix replaces the manual parser with the bounds-respecting json_mixed_arr_parse() and copies the extracted uid with an explicitly NUL-terminated buffer, eliminating both over-reads. |
| The Windows interactive service in OpenVPN 2.7_alpha1 through 2.7.4 allows remote attackers to cause persistent DNS state pollution or a service crash via a crafted search domain during the disconnection process |
