| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: bq25980: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix watch_id bounds checking in debug address watch v2
The address watch clear code receives watch_id as an unsigned value
(u32), but some helper functions were using a signed int and checked
bits by shifting with watch_id.
If a very large watch_id is passed from userspace, it can be converted
to a negative value. This can cause invalid shifts and may access
memory outside the watch_points array.
drm/amdkfd: Fix watch_id bounds checking in debug address watch v2
Fix this by checking that watch_id is within MAX_WATCH_ADDRESSES before
using it. Also use BIT(watch_id) to test and clear bits safely.
This keeps the behavior unchanged for valid watch IDs and avoids
undefined behavior for invalid ones.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_debug.c:448
kfd_dbg_trap_clear_dev_address_watch() error: buffer overflow
'pdd->watch_points' 4 <= u32max user_rl='0-3,2147483648-u32max' uncapped
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_debug.c
433 int kfd_dbg_trap_clear_dev_address_watch(struct kfd_process_device *pdd,
434 uint32_t watch_id)
435 {
436 int r;
437
438 if (!kfd_dbg_owns_dev_watch_id(pdd, watch_id))
kfd_dbg_owns_dev_watch_id() doesn't check for negative values so if
watch_id is larger than INT_MAX it leads to a buffer overflow.
(Negative shifts are undefined).
439 return -EINVAL;
440
441 if (!pdd->dev->kfd->shared_resources.enable_mes) {
442 r = debug_lock_and_unmap(pdd->dev->dqm);
443 if (r)
444 return r;
445 }
446
447 amdgpu_gfx_off_ctrl(pdd->dev->adev, false);
--> 448 pdd->watch_points[watch_id] = pdd->dev->kfd2kgd->clear_address_watch(
449 pdd->dev->adev,
450 watch_id);
v2: (as per, Jonathan Kim)
- Add early watch_id >= MAX_WATCH_ADDRESSES validation in the set path to
match the clear path.
- Drop the redundant bounds check in kfd_dbg_owns_dev_watch_id(). |
| In the Linux kernel, the following vulnerability has been resolved:
HID: intel-ish-hid: fix NULL-ptr-deref in ishtp_bus_remove_all_clients
During a warm reset flow, the cl->device pointer may be NULL if the
reset occurs while clients are still being enumerated. Accessing
cl->device->reference_count without a NULL check leads to a kernel panic.
This issue was identified during multi-unit warm reboot stress clycles.
Add a defensive NULL check for cl->device to ensure stability under
such intensive testing conditions.
KASAN: null-ptr-deref in range [0000000000000000-0000000000000007]
Workqueue: ish_fw_update_wq fw_reset_work_fn
Call Trace:
ishtp_bus_remove_all_clients+0xbe/0x130 [intel_ishtp]
ishtp_reset_handler+0x85/0x1a0 [intel_ishtp]
fw_reset_work_fn+0x8a/0xc0 [intel_ish_ipc] |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/gcs: Fix error handling in arch_set_shadow_stack_status()
alloc_gcs() returns an error-encoded pointer on failure, which comes
from do_mmap(), not NULL.
The current NULL check fails to detect errors, which could lead to using
an invalid GCS address.
Use IS_ERR_VALUE() to properly detect errors, consistent with the
check in gcs_alloc_thread_stack(). |
| Improper privilege management in Azure Entra ID allows an unauthorized attacker to elevate privileges over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
mfd: arizona: Fix regulator resource leak on wm5102_clear_write_sequencer() failure
The wm5102_clear_write_sequencer() helper may return an error
and just return, bypassing the cleanup sequence and causing
regulators to remain enabled, leading to a resource leak.
Change the direct return to jump to the err_reset label to
properly free the resources. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_set_rbtree: check for partial overlaps in anonymous sets
Userspace provides an optimized representation in case intervals are
adjacent, where the end element is omitted.
The existing partial overlap detection logic skips anonymous set checks
on start elements for this reason.
However, it is possible to add intervals that overlap to this anonymous
where two start elements with the same, eg. A-B, A-C where C < B.
start end
A B
start end
A C
Restore the check on overlapping start elements to report an overlap. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: smartpqi: Fix memory leak in pqi_report_phys_luns()
pqi_report_phys_luns() fails to release the rpl_list buffer when
encountering an unsupported data format or when the allocation for
rpl_16byte_wwid_list fails. These early returns bypass the cleanup logic,
leading to memory leaks.
Consolidate the error handling by adding an out_free_rpl_list label and use
goto statements to ensure rpl_list is consistently freed on failure.
Compile tested only. Issue found using a prototype static analysis tool and
code review. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: st33zp24: Fix missing cleanup on get_burstcount() error
get_burstcount() can return -EBUSY on timeout. When this happens,
st33zp24_send() returns directly without releasing the locality
acquired earlier.
Use goto out_err to ensure proper cleanup when get_burstcount() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: auth_gss: fix memory leaks in XDR decoding error paths
The gssx_dec_ctx(), gssx_dec_status(), and gssx_dec_name()
functions allocate memory via gssx_dec_buffer(), which calls
kmemdup(). When a subsequent decode operation fails, these
functions return immediately without freeing previously
allocated buffers, causing memory leaks.
The leak in gssx_dec_ctx() is particularly relevant because
the caller (gssp_accept_sec_context_upcall) initializes several
buffer length fields to non-zero values, resulting in memory
allocation:
struct gssx_ctx rctxh = {
.exported_context_token.len = GSSX_max_output_handle_sz,
.mech.len = GSS_OID_MAX_LEN,
.src_name.display_name.len = GSSX_max_princ_sz,
.targ_name.display_name.len = GSSX_max_princ_sz
};
If, for example, gssx_dec_name() succeeds for src_name but
fails for targ_name, the memory allocated for
exported_context_token, mech, and src_name.display_name
remains unreferenced and cannot be reclaimed.
Add error handling with goto-based cleanup to free any
previously allocated buffers before returning an error. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: wm97xx: Fix NULL pointer dereference in power_supply_changed()
In `probe()`, `request_irq()` is called before allocating/registering a
`power_supply` handle. If an interrupt is fired between the call to
`request_irq()` and `power_supply_register()`, the `power_supply` handle
will be used uninitialized in `power_supply_changed()` in
`wm97xx_bat_update()` (triggered from the interrupt handler). This will
lead to a `NULL` pointer dereference since
Fix this racy `NULL` pointer dereference by making sure the IRQ is
requested _after_ the registration of the `power_supply` handle. Since
the IRQ is the last thing requests in the `probe()` now, remove the
error path for freeing it. Instead add one for unregistering the
`power_supply` handle when IRQ request fails. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: single: fix refcount leak in pcs_add_gpio_func()
of_parse_phandle_with_args() returns a device_node pointer with refcount
incremented in gpiospec.np. The loop iterates through all phandles but
never releases the reference, causing a refcount leak on each iteration.
Add of_node_put() calls to release the reference after extracting the
needed arguments and on the error path when devm_kzalloc() fails.
This bug was detected by our static analysis tool and verified by my
code review. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: don't zero the entire extent if EXT4_EXT_DATA_PARTIAL_VALID1
When allocating initialized blocks from a large unwritten extent, or
when splitting an unwritten extent during end I/O and converting it to
initialized, there is currently a potential issue of stale data if the
extent needs to be split in the middle.
0 A B N
[UUUUUUUUUUUU] U: unwritten extent
[--DDDDDDDD--] D: valid data
|<- ->| ----> this range needs to be initialized
ext4_split_extent() first try to split this extent at B with
EXT4_EXT_DATA_ENTIRE_VALID1 and EXT4_EXT_MAY_ZEROOUT flag set, but
ext4_split_extent_at() failed to split this extent due to temporary lack
of space. It zeroout B to N and mark the entire extent from 0 to N
as written.
0 A B N
[WWWWWWWWWWWW] W: written extent
[SSDDDDDDDDZZ] Z: zeroed, S: stale data
ext4_split_extent() then try to split this extent at A with
EXT4_EXT_DATA_VALID2 flag set. This time, it split successfully and left
a stale written extent from 0 to A.
0 A B N
[WW|WWWWWWWWWW]
[SS|DDDDDDDDZZ]
Fix this by pass EXT4_EXT_DATA_PARTIAL_VALID1 to ext4_split_extent_at()
when splitting at B, don't convert the entire extent to written and left
it as unwritten after zeroing out B to N. The remaining work is just
like the standard two-part split. ext4_split_extent() will pass the
EXT4_EXT_DATA_VALID2 flag when it calls ext4_split_extent_at() for the
second time, allowing it to properly handle the split. If the split is
successful, it will keep extent from 0 to A as unwritten. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix double free in rxe_srq_from_init
In rxe_srq_from_init(), the queue pointer 'q' is assigned to
'srq->rq.queue' before copying the SRQ number to user space.
If copy_to_user() fails, the function calls rxe_queue_cleanup()
to free the queue, but leaves the now-invalid pointer in
'srq->rq.queue'.
The caller of rxe_srq_from_init() (rxe_create_srq) eventually
calls rxe_srq_cleanup() upon receiving the error, which triggers
a second rxe_queue_cleanup() on the same memory, leading to a
double free.
The call trace looks like this:
kmem_cache_free+0x.../0x...
rxe_queue_cleanup+0x1a/0x30 [rdma_rxe]
rxe_srq_cleanup+0x42/0x60 [rdma_rxe]
rxe_elem_release+0x31/0x70 [rdma_rxe]
rxe_create_srq+0x12b/0x1a0 [rdma_rxe]
ib_create_srq_user+0x9a/0x150 [ib_core]
Fix this by moving 'srq->rq.queue = q' after copy_to_user. |
| In the Linux kernel, the following vulnerability has been resolved:
efi: Fix reservation of unaccepted memory table
The reserve_unaccepted() function incorrectly calculates the size of the
memblock reservation for the unaccepted memory table. It aligns the
size of the table, but fails to account for cases where the table's
starting physical address (efi.unaccepted) is not page-aligned.
If the table starts at an offset within a page and its end crosses into
a subsequent page that the aligned size does not cover, the end of the
table will not be reserved. This can lead to the table being overwritten
or inaccessible, causing a kernel panic in accept_memory().
This issue was observed when starting Intel TDX VMs with specific memory
sizes (e.g., > 64GB).
Fix this by calculating the end address first (including the unaligned
start) and then aligning it up, ensuring the entire range is covered
by the reservation. |
| In the Linux kernel, the following vulnerability has been resolved:
net: remove WARN_ON_ONCE when accessing forward path array
Although unlikely, recent support for IPIP tunnels increases chances of
reaching this WARN_ON_ONCE if userspace manages to build a sufficiently
long forward path.
Remove it. |
| In the Linux kernel, the following vulnerability has been resolved:
slip: reject VJ receive packets on instances with no rstate array
slhc_init() accepts rslots == 0 as a valid configuration, with the
documented meaning of 'no receive compression'. In that case the
allocation loop in slhc_init() is skipped, so comp->rstate stays
NULL and comp->rslot_limit stays 0 (from the kzalloc of struct
slcompress).
The receive helpers do not defend against that configuration.
slhc_uncompress() dereferences comp->rstate[x] when the VJ header
carries an explicit connection ID, and slhc_remember() later assigns
cs = &comp->rstate[...] after only comparing the packet's slot number
to comp->rslot_limit. Because rslot_limit is 0, slot 0 passes the
range check, and the code dereferences a NULL rstate.
The configuration is reachable in-tree through PPP. PPPIOCSMAXCID
stores its argument in a signed int, and (val >> 16) uses arithmetic
shift. Passing 0xffff0000 therefore sign-extends to -1, so val2 + 1
is 0 and ppp_generic.c ends up calling slhc_init(0, 1). Because
/dev/ppp open is gated by ns_capable(CAP_NET_ADMIN), the whole path
is reachable from an unprivileged user namespace. Once the malformed
VJ state is installed, any inbound VJ-compressed or VJ-uncompressed
frame that selects slot 0 crashes the kernel in softirq context:
Oops: general protection fault, probably for non-canonical
address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:slhc_uncompress (drivers/net/slip/slhc.c:519)
Call Trace:
<TASK>
ppp_receive_nonmp_frame (drivers/net/ppp/ppp_generic.c:2466)
ppp_input (drivers/net/ppp/ppp_generic.c:2359)
ppp_async_process (drivers/net/ppp/ppp_async.c:492)
tasklet_action_common (kernel/softirq.c:926)
handle_softirqs (kernel/softirq.c:623)
run_ksoftirqd (kernel/softirq.c:1055)
smpboot_thread_fn (kernel/smpboot.c:160)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:164)
</TASK>
Reject the receive side on such instances instead of touching rstate.
slhc_uncompress() falls through to its existing 'bad' label, which
bumps sls_i_error and enters the toss state. slhc_remember() mirrors
that with an explicit sls_i_error increment followed by slhc_toss();
the sls_i_runt counter is not used here because a missing rstate is
an internal configuration state, not a runt packet.
The transmit path is unaffected: the only in-tree caller that picks
rslots from userspace (ppp_generic.c) still supplies tslots >= 1, and
slip.c always calls slhc_init(16, 16), so comp->tstate remains valid
and slhc_compress() continues to work. |
| In the Linux kernel, the following vulnerability has been resolved:
bareudp: fix NULL pointer dereference in bareudp_fill_metadata_dst()
bareudp_fill_metadata_dst() passes bareudp->sock to
udp_tunnel6_dst_lookup() in the IPv6 path without a NULL check.
The socket is only created in bareudp_open() and NULLed in
bareudp_stop(), so calling this function while the device is down
triggers a NULL dereference via sock->sk.
BUG: kernel NULL pointer dereference, address: 0000000000000018
RIP: 0010:udp_tunnel6_dst_lookup (net/ipv6/ip6_udp_tunnel.c:160)
Call Trace:
<TASK>
bareudp_fill_metadata_dst (drivers/net/bareudp.c:532)
do_execute_actions (net/openvswitch/actions.c:901)
ovs_execute_actions (net/openvswitch/actions.c:1589)
ovs_packet_cmd_execute (net/openvswitch/datapath.c:700)
genl_family_rcv_msg_doit (net/netlink/genetlink.c:1114)
genl_rcv_msg (net/netlink/genetlink.c:1209)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
</TASK>
Add a NULL check returning -ESHUTDOWN, consistent with the xmit paths
in the same driver. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Ludwig You QuickWebP – Compress / Optimize Images & Convert WebP | SEO Friendly quickwebp allows Path Traversal.This issue affects QuickWebP – Compress / Optimize Images & Convert WebP | SEO Friendly: from n/a through <= 3.2.7. |
| A local user with low privileges may be able to influence the behavior of a privileged system service by manipulating configuration or application-related files located in user-writable areas of the filesystem. The affected service processes data from locations that are not sufficiently protected against modification by low-privileged users. As the service runs with elevated privileges, successful exploitation may result in a local privilege escalation. |
