| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 is vulnerable to a denial of service when executing a specially crafted query with a small statement heap. |
| IBM Db2 12.1.0 through 12.1.4 is vulnerable to authorization bypass when uploading to a remote object storage path with a special query. |
| IBM Netezza Performance Server Replication Services 3.0.2.0 through 3.0.5.0 allows an attacker with low‑privileged access to escalate their privileges to root. By exploiting this flaw, the attacker can execute root‑level commands, obtain a root shell, and change the root user’s password. Successful exploitation also enables modification or removal of system‑wide files and the installation of persistent backdoors. This results in full system compromise with complete loss of confidentiality, integrity, and availability. |
| The MinhNhut Link Gateway plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'url' parameter on the redirect page in all versions up to, and including, 3.6.1 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| The rexCrawler plugin for WordPress is vulnerable to Stored Cross-Site Scripting via admin settings in all versions up to, and including, 1.0.15 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level permissions and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installations and installations where unfiltered_html has been disabled. |
| Missing Authorization vulnerability in WebToffee Product Import Export for WooCommerce allows Exploiting Incorrectly Configured Access Control Security Levels.
This issue affects Product Import Export for WooCommerce: from n/a through 2.5.6. |
| A vulnerability was determined in JeecgBoot up to 3.9.1. The affected element is the function LoginController.selectDepart of the file /sys/selectDepart. This manipulation causes improper access controls. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. Upgrading to version 3.9.2 is sufficient to fix this issue. It is suggested to upgrade the affected component. |
| A vulnerability was detected in UTT HiPER 1250GW up to 3.2.7-210907-180535. Affected by this vulnerability is the function strcpy of the file /goform/formConfigFastDirectionW of the component Web Management Interface. Performing a manipulation of the argument Profile results in stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit is now public and may be used. |
| A security flaw has been discovered in UTT HiPER 1200GW up to 2.5.3-170306. This impacts the function strcpy of the file /goform/setSysAdm of the component Web Management Interface. The manipulation of the argument sysAdmUser/sysAdmPass results in buffer overflow. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. |
| A vulnerability has been found in itsourcecode Courier Management System 1.0. Impacted is an unknown function of the file /manage_user.php. Such manipulation of the argument ID leads to sql injection. The attack may be performed from remote. The exploit has been disclosed to the public and may be used. |
| A vulnerability was detected in JeecgBoot up to 3.9.1. This vulnerability affects unknown code of the component AiragModelController. The manipulation of the argument list/queryById results in improper access controls. The attack can be executed remotely. The exploit is now public and may be used. Upgrading to version 3.9.2 is able to resolve this issue. The affected component should be upgraded. |
| The Xpro Elementor Addons - Pro plugin for WordPress is vulnerable to Arbitrary File Reading in all versions up to, and including, 1.4.7 via the Draw SVG widget. This makes it possible for authenticated attackers, with Contributor-level access and above, to read the contents of arbitrary files on the server, which can contain sensitive information. |
| The MinhNhut Link Gateway plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's settings (Description, Title, and other fields) in all versions up to, and including, 3.6.1 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Administrator-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses the redirect page. This only affects multi-site installations and installations where unfiltered_html has been disabled. |
| A security vulnerability has been detected in code-projects Project Management System 1.0. Affected is an unknown function of the file chk.php of the component Login. The manipulation leads to sql injection. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. |
| Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in SeedProd LLC SeedProd Pro allows PHP Local File Inclusion.
This issue affects SeedProd Pro: from n/a before 6.19.5. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Arjun Thakur Duplicate Page and Post allows Blind SQL Injection.
This issue affects Duplicate Page and Post: from n/a through 2.9.5. |
| opentelemetry-js is the OpenTelemetry JavaScript Client. Prior to 0.217.0, a single malformed HTTP request crashes any Node.js process running the OpenTelemetry JS Prometheus exporter. The metrics endpoint (default 0.0.0.0:9464) has no error handling around URL parsing, so a request with an invalid URI causes an uncaught TypeError that terminates the process. This vulnerability is fixed in 0.217.0. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: arp_tables: fix IEEE1394 ARP payload parsing
Weiming Shi says:
"arp_packet_match() unconditionally parses the ARP payload assuming two
hardware addresses are present (source and target). However,
IPv4-over-IEEE1394 ARP (RFC 2734) omits the target hardware address
field, and arp_hdr_len() already accounts for this by returning a
shorter length for ARPHRD_IEEE1394 devices.
As a result, on IEEE1394 interfaces arp_packet_match() advances past a
nonexistent target hardware address and reads the wrong bytes for both
the target device address comparison and the target IP address. This
causes arptables rules to match against garbage data, leading to
incorrect filtering decisions: packets that should be accepted may be
dropped and vice versa.
The ARP stack in net/ipv4/arp.c (arp_create and arp_process) already
handles this correctly by skipping the target hardware address for
ARPHRD_IEEE1394. Apply the same pattern to arp_packet_match()."
Mangle the original patch to always return 0 (no match) in case user
matches on the target hardware address which is never present in
IEEE1394.
Note that this returns 0 (no match) for either normal and inverse match
because matching in the target hardware address in ARPHRD_IEEE1394 has
never been supported by arptables. This is intentional, matching on the
target hardware address should never evaluate true for ARPHRD_IEEE1394.
Moreover, adjust arpt_mangle to drop the packet too as AI suggests:
In arpt_mangle, the logic assumes a standard ARP layout. Because
IEEE1394 (FireWire) omits the target hardware address, the linear
pointer arithmetic miscalculates the offset for the target IP address.
This causes mangling operations to write to the wrong location, leading
to packet corruption. To ensure safety, this patch drops packets
(NF_DROP) when mangling is requested for these fields on IEEE1394
devices, as the current implementation cannot correctly map the FireWire
ARP payload.
This omits both mangling target hardware and IP address. Even if IP
address mangling should be possible in IEEE1394, this would require
to adjust arpt_mangle offset calculation, which has never been
supported.
Based on patch from Weiming Shi <bestswngs@gmail.com>. |
| In the Linux kernel, the following vulnerability has been resolved:
bareudp: fix NULL pointer dereference in bareudp_fill_metadata_dst()
bareudp_fill_metadata_dst() passes bareudp->sock to
udp_tunnel6_dst_lookup() in the IPv6 path without a NULL check.
The socket is only created in bareudp_open() and NULLed in
bareudp_stop(), so calling this function while the device is down
triggers a NULL dereference via sock->sk.
BUG: kernel NULL pointer dereference, address: 0000000000000018
RIP: 0010:udp_tunnel6_dst_lookup (net/ipv6/ip6_udp_tunnel.c:160)
Call Trace:
<TASK>
bareudp_fill_metadata_dst (drivers/net/bareudp.c:532)
do_execute_actions (net/openvswitch/actions.c:901)
ovs_execute_actions (net/openvswitch/actions.c:1589)
ovs_packet_cmd_execute (net/openvswitch/datapath.c:700)
genl_family_rcv_msg_doit (net/netlink/genetlink.c:1114)
genl_rcv_msg (net/netlink/genetlink.c:1209)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
</TASK>
Add a NULL check returning -ESHUTDOWN, consistent with the xmit paths
in the same driver. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: taprio: fix NULL pointer dereference in class dump
When a TAPRIO child qdisc is deleted via RTM_DELQDISC, taprio_graft()
is called with new == NULL and stores NULL into q->qdiscs[cl - 1].
Subsequent RTM_GETTCLASS dump operations walk all classes via
taprio_walk() and call taprio_dump_class(), which calls taprio_leaf()
returning the NULL pointer, then dereferences it to read child->handle,
causing a kernel NULL pointer dereference.
The bug is reachable with namespace-scoped CAP_NET_ADMIN on any kernel
with CONFIG_NET_SCH_TAPRIO enabled. On systems with unprivileged user
namespaces enabled, an unprivileged local user can trigger a kernel
panic by creating a taprio qdisc inside a new network namespace,
grafting an explicit child qdisc, deleting it, and requesting a class
dump. The RTM_GETTCLASS dump itself requires no capability.
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000007: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f]
RIP: 0010:taprio_dump_class (net/sched/sch_taprio.c:2478)
Call Trace:
<TASK>
tc_fill_tclass (net/sched/sch_api.c:1966)
qdisc_class_dump (net/sched/sch_api.c:2326)
taprio_walk (net/sched/sch_taprio.c:2514)
tc_dump_tclass_qdisc (net/sched/sch_api.c:2352)
tc_dump_tclass_root (net/sched/sch_api.c:2370)
tc_dump_tclass (net/sched/sch_api.c:2431)
rtnl_dumpit (net/core/rtnetlink.c:6864)
netlink_dump (net/netlink/af_netlink.c:2325)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6959)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
</TASK>
Fix this by substituting &noop_qdisc when new is NULL in
taprio_graft(), a common pattern used by other qdiscs (e.g.,
multiq_graft()) to ensure the q->qdiscs[] slots are never NULL.
This makes control-plane dump paths safe without requiring individual
NULL checks.
Since the data-plane paths (taprio_enqueue and taprio_dequeue_from_txq)
previously had explicit NULL guards that would drop/skip the packet
cleanly, update those checks to test for &noop_qdisc instead. Without
this, packets would reach taprio_enqueue_one() which increments the root
qdisc's qlen and backlog before calling the child's enqueue; noop_qdisc
drops the packet but those counters are never rolled back, permanently
inflating the root qdisc's statistics.
After this change *old can be a valid qdisc, NULL, or &noop_qdisc.
Only call qdisc_put(*old) in the first case to avoid decreasing
noop_qdisc's refcount, which was never increased. |
