| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| When a notification relating to low battery appears for a user with whom the device has been shared, tapping the notification grants full access to the power settings of that device. |
| The content of a SVG file, received as input
in Centreon web, was not properly checked. Allows Reflected XSS.
A user with elevated privileges can inject JS script by altering the content of a SVG media, during the submit request.
This issue affects web: from 24.10.0 before 24.10.5, from 24.04.0 before 24.04.11, from 23.10.0 before 23.10.22, from 23.04.0 before 23.04.27, from 22.10.0 before 22.10.29. |
| Incorrect Authorization vulnerability in Centreon web (API Token creation form modules) allows Privilege Escalation.This issue affects web: from 24.04.0 before 24.04.10, from 24.10.0 before 24.10.4. |
| Missing input validation in the SEH Computertechnik utnserver Pro, SEH Computertechnik utnserver ProMAX, SEH Computertechnik INU-100 web-interface allows stored Cross-Site Scripting (XSS)..This issue affects utnserver Pro, utnserver ProMAX, INU-100 version 20.1.22 and below. |
| Missing input validation and OS command integration of the input in the ORing IAP-420 web-interface allows authenticated command injection.This issue affects IAP-420 version 2.01e and below. |
| An Improper Authentication vulnerability in Korenix JetNet TFTP allows abuse of this service. This issue affects JetNet devices older than firmware version 2024/01. |
| An Improper Verification of Cryptographic Signature vulnerability in the update process of Korenix JetNet Series allows replacing the whole operating system including Trusted Executables. This issue affects JetNet devices older than firmware version 2024/01. |
| Redis is an open source, in-memory database that persists on disk. Versions 8.2.1 and below allow an authenticated user to use a specially crafted Lua script to manipulate the garbage collector, trigger a use-after-free and potentially lead to remote code execution. The problem exists in all versions of Redis with Lua scripting. This issue is fixed in version 8.2.2. To workaround this issue without patching the redis-server executable is to prevent users from executing Lua scripts. This can be done using ACL to restrict EVAL and EVALSHA commands. |
| It is possible to cause an use-after-free write in SANM decoding with a carefully crafted animation using subversion <2.
When a STOR chunk is present, a subsequent FOBJ chunk will be saved in ctx->stored_frame. Stored frames can later be referenced by FTCH chunks. For files using subversion < 2, the undecoded frame is stored, and decoded again when the FTCH chunks are parsed. However, in process_frame_obj if the frame has an invalid size, there’s an early return, with a value of 0.
This causes the code in decode_frame to still store the raw frame buffer into ctx->stored_frame. Leaving ctx->has_dimensions set to false.
A subsequent chunk with type FTCH would call process_ftch and decode that frame obj again, adding to the top/left values and calling process_frame_obj again.
Given that we never set ctx->have_dimensions before, this time we set the dimensions, calling init_buffers, which can reallocate the buffer in ctx->stored_frame, freeing the previous one. However, the GetByteContext object gb still holds a reference to the old buffer.
Finally, when the code tries to decode the frame, codecs that accept a GetByteContext as a parameter will trigger a use-after-free read when using gb.
GetByteContext is only used for reading bytes, so at most one could read invalid data. There are no heap allocations between the free and when the object is accessed. However, upon returning to process_ftch, the code restores the original values for top/left in stored_frame, writing 4 bytes to the freed data at offset 6, potentially corrupting the allocator’s metadata.
This issue can be triggered just by probing whether a file has the sanm format.
We recommend upgrading to version 8.0 or beyond. |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, there's an implicit assumption that all image channels have the same pixel type (and size), and that if there are four channels, the first four are "B", "G", "R" and "A". The channel parsing code can be found in decode_header. The buffer td->uncompressed_data is allocated in decode_block based on the xsize, ysize and computed current_channel_offset.
The function dwa_uncompress then assumes at [5] that if there are 4 channels, these are "B", "G", "R" and "A", and in the calculations at [6] and [7] that all channels are of the same type, which matches the type of the main color channels.
If we set the main color channels to a 4-byte type and add duplicate or unknown channels of the 2-byte EXR_HALF type, then the addition at [7] will increment the pointer by 4-bytes * xsize * nb_channels, which will exceed the allocated buffer.
We recommend upgrading to version 8.0 or beyond. |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, there's an implicit assumption that the height and width are divisible by 8.
If the height or width of the image is not divisible by 8, the copy loops at [0] and [1] will continue to write until the next multiple of 8.
The buffer td->uncompressed_data is allocated in decode_block based on the precise height and width of the image, so the "rounded-up" multiple of 8 in the copy loop can exceed the buffer bounds, and the write block starting at [2] can corrupt following heap memory.
We recommend upgrading to version 8.0 or beyond. |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, the specified raw length of run-length-encoded data is not checked when using it to calculate the output data.
We read rle_raw_size from the input file at [0], we decompress and decode into the buffer td->rle_raw_data of size rle_raw_size at [1], and then at [2] we will access entries in this buffer up to (td->xsize - 1) * (td->ysize - 1) + rle_raw_size / 2, which may exceed rle_raw_size.
We recommend upgrading to version 8.0 or beyond. |
| When calculating the content path in handling of MPEG-DASH manifests, there's an out-of-bounds NUL-byte write one byte past the end of the buffer.When we call xmlNodeGetContent below [0], it returns a buffer precisely allocated to match the string length, using strdup internally. If this buffer is not an empty string, it is assigned to root_url at [1].If the last (non-NUL) byte in this buffer is not '/' then we append '/' in-place at [2]. This will write two bytes into the buffer, starting at the last valid byte in the buffer, writing the NUL byte beyond the end of the allocated buffer.
We recommend upgrading to version 8.0 or beyond. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| Multiple robotic products by Unitree sharing a common firmware, including the Go2, G1, H1, and B2 devices, contain a command injection vulnerability. By setting a malicious string when configuring the on-board WiFi via a BLE module of an affected robot, then triggering a restart of the WiFi service, an attacker can ultimately trigger commands to be run as root via the wpa_supplicant_restart.sh shell script. All Unitree models use firmware derived from the same codebase (MIT Cheetah), and the two major forks are the G1 (humanoid) and Go2 (quadruped) branches. |
| In the smartLibrary component of the HRForecast Suite 0.4.3, a SQL injection vulnerability was discovered in the valueKey parameter. This flaw enables any authenticated user to execute arbitrary SQL queries, via crafted payloads to valueKey to the api/smartlibrary/v2/en/dictionaries/options/lookup endpoint. |
| EzGED3 3.5.0 contains an unauthenticated arbitrary file read vulnerability due to improper access control and insufficient input validation in a script exposed via the web interface. A remote attacker can supply a crafted path parameter to a PHP script to read arbitrary files from the filesystem. The script lacks both authentication checks and secure path handling, allowing directory traversal attacks (e.g., ../../../) to access sensitive files such as configuration files, database dumps, source code, and password reset tokens. If phpMyAdmin is exposed, extracted credentials can be used for direct administrative access. In environments without such tools, attacker-controlled file reads still allow full database extraction by targeting raw MySQL data files. The vendor states that the issue is fixed in 3.5.72.27183. |
| Cross site scripting (XSS) vulnerability in Hustoj 2025-01-31 via the TID parameter to thread.php. |
| Vulnerability in the Oracle Concurrent Processing product of Oracle E-Business Suite (component: BI Publisher Integration). Supported versions that are affected are 12.2.3-12.2.14. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Concurrent Processing. Successful attacks of this vulnerability can result in takeover of Oracle Concurrent Processing. CVSS 3.1 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H). |
