| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: ifb: report ethtool stats over num_tx_queues
ifb_dev_init() allocates dp->tx_private to dev->num_tx_queues
entries via kzalloc_objs(*txp, dev->num_tx_queues). Both IFB
per-queue RX and TX stats live in those entries: ifb_xmit() updates
txp->rx_stats using the skb queue mapping, ifb_ri_tasklet() updates
txp->tx_stats, and ifb_stats64() aggregates both over
dev->num_tx_queues.
The ethtool stats callbacks instead size and walk the per-queue
stats with dev->real_num_rx_queues and dev->real_num_tx_queues. With
an asymmetric device where the RX queue count exceeds the TX queue
count, for example:
ip link add name ifb10 numtxqueues 1 numrxqueues 8 type ifb
ethtool -S ifb10
ifb_get_ethtool_stats() indexes past the tx_private allocation and
copies adjacent slab data through ETHTOOL_GSTATS.
Use dev->num_tx_queues consistently for the stats strings, the
stats count, and the stats data walks. This reports one RX stats
group and one TX stats group for each backing ifb_q_private entry,
which is the queue set IFB can actually populate.
Reproduced under UML+KASAN at v7.1-rc2:
BUG: KASAN: slab-out-of-bounds in ifb_fill_stats_data+0x3c/0xae
Read of size 8 at addr 0000000062dbd228 by task ethtool/36
ifb_fill_stats_data+0x3c/0xae
ifb_get_ethtool_stats+0xc0/0x129
__dev_ethtool+0x1ca5/0x363c
dev_ethtool+0x123/0x1b3
dev_ioctl+0x56c/0x744
sock_do_ioctl+0x15f/0x1b2
sock_ioctl+0x4d5/0x50a
sys_ioctl+0xd8b/0xde9
With the patch applied, the same UML+KASAN repro is silent and
ethtool -S ifb10 reports only the stats backed by the single
allocated tx_private entry. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethtool: fix NULL pointer dereference in phy_reply_size
In phy_prepare_data(), several strings such as 'name', 'drvname',
'upstream_sfp_name', and 'downstream_sfp_name' are allocated using
kstrdup(). However, these allocations were not checked for failure.
If kstrdup() fails for 'name', it returns NULL while the function
continues. This leads to a kernel NULL pointer dereference and panic
later in phy_reply_size() when it unconditionally calls strlen() on
the NULL pointer.
While other strings like 'upstream_sfp_name' might be checked before
access in certain code paths, failing to handle these allocations
consistently can lead to incomplete data reporting or hidden bugs.
Fix this by adding proper NULL checks for all kstrdup() calls in
phy_prepare_data() and implement a centralized error handling path
using goto labels to ensure all previously allocated resources are
freed on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
l2tp: use list_del_rcu in l2tp_session_unhash
An unprivileged local user can pin a host CPU indefinitely in
l2tp_session_get_by_ifname() by issuing L2TP_CMD_SESSION_GET on
L2TP_ATTR_IFNAME concurrently with L2TP_CMD_SESSION_CREATE and
L2TP_CMD_SESSION_DELETE on the same tunnel. All three commands take
GENL_UNS_ADMIN_PERM, so CAP_NET_ADMIN in the netns user namespace
suffices; on any host that has l2tp_core loaded the trigger is
reachable from a standard `unshare -Urn` sandbox.
l2tp_session_unhash() removes a session from tunnel->session_list
with list_del_init(), but that list is walked by
l2tp_session_get_by_ifname() with list_for_each_entry_rcu() under
rcu_read_lock_bh(). list_del_init() leaves the deleted entry's
next/prev self-pointing; a reader that has loaded the entry and
then advances pos->list.next reads &session->list, container_of()s
back to the same session, and list_for_each_entry_rcu() never
reaches the list head. The CPU stays in strcmp() inside the
walker, with BH and preemption disabled, so RCU grace periods on
the host stall behind it and the wedged thread cannot be killed
(SIGKILL is delivered on syscall return).
Use list_del_rcu() to match the existing list_add_rcu() in
l2tp_session_register(); the deleted session remains visible to
in-flight walkers with consistent next/prev pointers until
kfree_rcu() in l2tp_session_free() releases it. tunnel->session_list
has exactly one list_del_init() call site; the list_del_init
(&session->clist) at l2tp_core.c:533 operates on the per-collision
list, which is not walked under RCU. list_empty(&session->list) is
not used anywhere in net/l2tp/ after the unhash point, so dropping
the post-delete self-init is safe; the fix has no userspace-visible
behavior change. |
| In the Linux kernel, the following vulnerability has been resolved:
igc: fix potential skb leak in igc_fpe_xmit_smd_frame()
When igc_fpe_init_tx_descriptor() fails, no one takes care of an
allocated skb, leaking it. [1]
Use dev_kfree_skb_any() on failure.
Tested on an I226 adapter with the following command, while injecting
faults in igc_fpe_init_tx_descriptor() to trigger the error path.
# ethtool --set-mm $DEV verify-enabled on tx-enabled on pmac-enabled on
[1]
unreferenced object 0xffff888113c6cdc0 (size 224):
...
backtrace (crc be3d3fda):
kmem_cache_alloc_node_noprof+0x3b1/0x410
__alloc_skb+0xde/0x830
igc_fpe_xmit_smd_frame.isra.0+0xad/0x1b0
igc_fpe_send_mpacket+0x37/0x90
ethtool_mmsv_verify_timer+0x15e/0x300 |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: codecs: pcm512x: fix null-ptr dereference in pcm512x_overclock_xxx_put()
In the pcm512x chipset driver, pcm512x_overclock_xxx_put() is defined as
a general mixer kcontrol instead of a DAPM kcontrol, so struct
snd_soc_dapm_context must not be accessed via
snd_soc_dapm_kcontrol_to_dapm().
This causes a NULL pointer dereference, so it must be modified to use
snd_soc_component_to_dapm(). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic: Free private_irqs when init fails after allocation
Companion to commit 250f25367b58 ("KVM: arm64: Tear down vGIC on
failed vCPU creation"), which added the missing kvm_vgic_vcpu_destroy()
call to the kvm_share_hyp() failure path in kvm_arch_vcpu_create(). The
kvm_vgic_vcpu_init() failure path immediately above it has the same
shape and still needs the same cleanup.
Call kvm_vgic_vcpu_destroy() when kvm_vgic_vcpu_init() fails so private
IRQs allocated before a redistributor iodev registration failure are
released before the failed vCPU is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: isci: Fix use-after-free in device removal path
The ISCI completion tasklet is initialized in isci_host_alloc()
(drivers/scsi/isci/init.c:496) and scheduled from both MSI-X and legacy
interrupt handlers (drivers/scsi/isci/host.c:223,613).
isci_host_deinit() stops the controller and waits for stop completion,
but it never kills completion_tasklet before teardown continues. A
top-of-function tasklet_kill() is not sufficient here: interrupts are
only disabled when isci_host_stop_complete() runs, so until
wait_for_stop() returns the IRQ handlers can still requeue the
tasklet. The tasklet callback also re-enables interrupts after draining
completions, so killing the tasklet before the source is quiesced leaves
the same race open.
Once wait_for_stop() returns, no further IRQ-driven scheduling can
occur. Kill completion_tasklet there so teardown cannot race a queued
tasklet running on a dead ihost. On remove or unload, the stale callback
can otherwise dereference ihost and touch ihost->smu_registers after the
host lifetime ends.
A UML + KASAN analogue reproduced the failure class both with no
tasklet_kill() and with tasklet_kill() placed before source quiesce, and
stayed clean once the kill happened after quiescing the scheduling
source.
This mirrors commit f6ab594672d4 ("scsi: aic94xx: fix use-after-free in
device removal path"), but ISCI needs the kill after wait_for_stop(). |
| In the Linux kernel, the following vulnerability has been resolved:
fwctl: pds: Validate RPC input size before parsing
The fwctl core allocates the device-specific RPC input buffer with
fwctl_rpc.in_len and passes that buffer to the driver callback.
pdsfc_fw_rpc() casts the buffer to struct fwctl_rpc_pds and then calls
pdsfc_validate_rpc(), which reads fields from that structure before
checking that the input buffer is large enough to contain it. A short
in_len can make pds_fwctl read beyond the allocation.
Reject pds RPC buffers that are smaller than struct fwctl_rpc_pds before
parsing any pds-specific fields. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix shrinker deadlock
With PROVE_LOCKING on an Snapdragon X1 and VM reclaim pressure, we see:
======================================================
WARNING: possible circular locking dependency detected
7.0.0-debug+ #43 Tainted: G W
------------------------------------------------------
kswapd0/82 is trying to acquire lock:
ffff800080ec3870 (reservation_ww_class_acquire){+.+.}-{0:0}, at: msm_gem_shrinker_scan+0x17c/0x400 [msm]
but task is already holding lock:
ffffc31709b263b8 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x88/0x988
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (fs_reclaim){+.+.}-{0:0}:
__lock_acquire+0x4d0/0xad0
lock_acquire.part.0+0xc4/0x248
lock_acquire+0x8c/0x248
fs_reclaim_acquire+0xd0/0xf0
dma_resv_lockdep+0x224/0x348
do_one_initcall+0x84/0x5d0
do_initcalls+0x194/0x1d8
kernel_init_freeable+0x128/0x180
kernel_init+0x2c/0x160
ret_from_fork+0x10/0x20
-> #1 (reservation_ww_class_mutex){+.+.}-{4:4}:
__lock_acquire+0x4d0/0xad0
lock_acquire.part.0+0xc4/0x248
lock_acquire+0x8c/0x248
dma_resv_lockdep+0x1a8/0x348
do_one_initcall+0x84/0x5d0
do_initcalls+0x194/0x1d8
kernel_init_freeable+0x128/0x180
kernel_init+0x2c/0x160
ret_from_fork+0x10/0x20
-> #0 (reservation_ww_class_acquire){+.+.}-{0:0}:
check_prev_add+0x114/0x790
validate_chain+0x594/0x6f0
__lock_acquire+0x4d0/0xad0
lock_acquire.part.0+0xc4/0x248
lock_acquire+0x8c/0x248
drm_gem_lru_scan+0x1ac/0x440
msm_gem_shrinker_scan+0x17c/0x400 [msm]
do_shrink_slab+0x150/0x4a0
shrink_slab+0x144/0x460
shrink_one+0x9c/0x1b0
shrink_many+0x27c/0x5c0
shrink_node+0x344/0x550
balance_pgdat+0x2c0/0x988
kswapd+0x11c/0x318
kthread+0x10c/0x128
ret_from_fork+0x10/0x20
other info that might help us debug this:
Chain exists of:
reservation_ww_class_acquire --> reservation_ww_class_mutex --> fs_reclaim
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
lock(reservation_ww_class_mutex);
lock(fs_reclaim);
lock(reservation_ww_class_acquire);
*** DEADLOCK ***
1 lock held by kswapd0/82:
#0: ffffc31709b263b8 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x88/0x988
stack backtrace:
CPU: 4 UID: 0 PID: 82 Comm: kswapd0 Tainted: G W 7.0.0-debug+ #43 PREEMPT(full)
Tainted: [W]=WARN
Hardware name: LENOVO 21BX0016US/21BX0016US, BIOS N3HET94W (1.66 ) 09/15/2025
Call trace:
show_stack+0x20/0x40 (C)
dump_stack_lvl+0x9c/0xd0
dump_stack+0x18/0x30
print_circular_bug+0x114/0x120
check_noncircular+0x178/0x198
check_prev_add+0x114/0x790
validate_chain+0x594/0x6f0
__lock_acquire+0x4d0/0xad0
lock_acquire.part.0+0xc4/0x248
lock_acquire+0x8c/0x248
drm_gem_lru_scan+0x1ac/0x440
msm_gem_shrinker_scan+0x17c/0x400 [msm]
do_shrink_slab+0x150/0x4a0
shrink_slab+0x144/0x460
shrink_one+0x9c/0x1b0
shrink_many+0x27c/0x5c0
shrink_node+0x344/0x550
balance_pgdat+0x2c0/0x988
kswapd+0x11c/0x318
kthread+0x10c/0x128
ret_from_fork+0x10/0x20
kswapd0 holding fs_reclaim calls the MSM shrinker, which calls
dma_resv_lock. This in turn acquires fs_reclaim.
Fix this deadlock by using dma_resv_trylock() instead, dropping the
subsequently unused passed wait-wound lock 'ticket'.
Patchwork: https://patchwork.freedesktop.org/patch/723564/
[rob: fixup compile errors, replace lockdep splat with somethin
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: bla: avoid NULL-ptr deref for claim via dropped interface
Without rtnl_lock held, a hardif might be retrieved as primary interface of
a meshif, but then (while operating on this interface) getting decoupled
from the mesh interface. In this case, the meshif still exists but the
pointer from the primary hardif to the meshif is set to NULL.
The mesh_iface must be checked first to be non-NULL before continuing to
send an ARP request using meshif. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tp_meter: fix tp_vars reference leak in receiver shutdown
The receiver shutdown timer handler, batadv_tp_receiver_shutdown(), is
responsible for releasing the tp_vars reference it holds. However, the
existing logic for coordinating this release with batadv_tp_stop_all() was
flawed.
timer_shutdown_sync() guarantees the timer will not fire again after it
returns, but it returns non-zero only when the timer was pending at the
time of the call. If the timer had already expired (and
batadv_tp_stop_all() would unsucessfully try to rearm itself),
batadv_tp_stop_all() skips its batadv_tp_vars_put(), and
batadv_tp_receiver_shutdown() fails to put its own reference as well.
Fix this by introducing a new atomic variable receiving that is set to 1
when the receiver is initialized and cleared atomically with atomic_xchg()
by whichever side claims it first. Only the side that observes the
transition from 1 to 0 is responsible for releasing the tp_vars timer
reference, eliminating the uncertainty. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tt: avoid empty VLAN responses
The commit 16116dac2339 ("batman-adv: prevent TT request storms by not
sending inconsistent TT TLVLs") added checks to the local (direct) TT
response code. But the response can also be done indirectly by another node
using the global TT state. To avoid such inconsistency states reported in
the original fix, also avoid sending empty VLANs for replies from the
global TT state. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/adm1266) reject implausible blackbox record_count
adm1266_nvmem_read_blackbox() loops over a record_count that comes
straight from byte 3 of the BLACKBOX_INFO response. The destination
buffer is data->dev_mem, sized for the nvmem cell's declared 2048
bytes (ADM1266_BLACKBOX_MAX_RECORDS * ADM1266_BLACKBOX_SIZE = 32 * 64).
A device that reports a record_count greater than 32 -- whether due
to firmware bugs, bus corruption, or a non-responsive slave returning
0xff -- would walk read_buff past the end of the dev_mem allocation
on the trailing iterations.
Cap record_count at ADM1266_BLACKBOX_MAX_RECORDS (introduced here)
before entering the loop and return -EIO on any larger value, so a
malformed BLACKBOX_INFO response cannot drive the loop out of bounds. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/adm1266) bounce blackbox records through a protocol-sized buffer
adm1266_pmbus_block_xfer() copies the device-supplied block payload
into the caller-provided buffer using the device-supplied length:
memcpy(data_r, &msgs[1].buf[1], msgs[1].buf[0]);
The helper does not know how large data_r is and trusts the device to
return at most one record's worth of bytes. adm1266_nvmem_read_blackbox()
violates that contract: it advances read_buff inside data->dev_mem in
ADM1266_BLACKBOX_SIZE (64-byte) strides while the helper is willing to
write up to ADM1266_PMBUS_BLOCK_MAX (255) bytes. A device that returns
more than 64 bytes on the trailing record (read_buff offset 1984 in
the 2048-byte dev_mem allocation) overflows dev_mem by up to 191 bytes
before the post-call
if (ret != ADM1266_BLACKBOX_SIZE)
return -EIO;
can reject the response.
Contain the fix in the caller without changing the helper signature:
read each record into a 255-byte local bounce buffer that matches the
helper's maximum output, validate the returned length, and only then
copy exactly ADM1266_BLACKBOX_SIZE bytes into the dev_mem slot. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/adm1266) reject short block-read responses in the GPIO accessors
adm1266_gpio_get() and adm1266_gpio_get_multiple() both compose the
pin-status word as
pins_status = read_buf[0] + (read_buf[1] << 8);
right after i2c_smbus_read_block_data(), guarding only against an
error return. A well-behaved device returns 2 bytes for
GPIO_STATUS/PDIO_STATUS, but the helper happily reports a 0- or
1-byte response too. If the device returns 0 bytes, both read_buf
slots are uninitialized stack memory; if it returns 1 byte, read_buf[1]
is.
The composed value then flows through set_bit() into the caller's
*bits in adm1266_gpio_get_multiple(), or into the return value of
adm1266_gpio_get(), and ends up in userspace via gpiolib (sysfs and
the char-dev ioctls). That leaks a few bits of kernel stack per
request on any device whose firmware glitch, bus error, or hostile
slave produces a short block-read response.
Add the missing length check to both call sites and surface a short
response as -EIO. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: x_tables: allocate hook ops while under mutex
arp/ip(6)t_register_table() add the table to the per-netns list via
xt_register_table() before allocating the per-netns hook ops copy
via kmemdup_array(). This leaves a window where the table is
visible in the list with ops=NULL.
If the pernet exit happens runs concurrently the pre_exit callback finds
the table via xt_find_table() and passes the NULL ops pointer to
nf_unregister_net_hooks(), causing a NULL dereference:
general protection fault in nf_unregister_net_hooks+0xbc/0x150
RIP: nf_unregister_net_hooks (net/netfilter/core.c:613)
Call Trace:
ipt_unregister_table_pre_exit
iptable_mangle_net_pre_exit
ops_pre_exit_list
cleanup_net
Fix by moving the ops allocation into the xtables core so the table is
never in the list without valid ops. Also ensure the table is no longer
processing packets before its torn down on error unwind.
nf_register_net_hooks might have published at least one hook; call
synchronize_rcu() if there was an error.
audit log register message gets deferred until all operations have
passed, this avoids need to emit another ureg message in case of
error unwinding.
Based on earlier patch by Tristan Madani. |
| In the Linux kernel, the following vulnerability has been resolved:
fprobe: Fix unregister_fprobe() to wait for RCU grace period
Commit 4346ba1604093 ("fprobe: Rewrite fprobe on function-graph tracer")
changed fprobe to register struct fprobe to an rcu-hlist, but it forgot
to wait for RCU GP. Thus there can be use-after-free if the fprobe is
released right after unregistering. This can be happened on fprobe
event and sample module code.
To fix this issue, add synchronize_rcu() in unregister_fprobe().
Note that BPF is OK because fprobe is used as a part of
bpf_kprobe_multi_link. This unregisters its fprobe in
bpf_kprobe_multi_link_release() and it is deallocated via
bpf_kprobe_multi_link_dealloc(), which is invoked from
bpf_link_defer_dealloc_rcu_gp() RCU callback.
For BPF, this also introduced unregister_fprobe_async() which does
NOT wait for RCU grace priod. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix bio leak on mapping failure
The local bio is always NULL, so we'd leak the bio if the integrity
mapping failed. Just get it directly from the request. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: fix use-after-free in nvme_free_host_mem()
nvme_free_host_mem() frees dev->hmb_sgt via dma_free_noncontiguous()
but never clears the pointer afterward. This leads to a use-after-free
if nvme_free_host_mem() is called twice in the same error path.
This can happen during nvme_probe() when nvme_setup_host_mem() succeeds
in allocating the HMB (setting dev->hmb_sgt) but nvme_set_host_mem()
fails with an I/O error:
nvme_setup_host_mem()
nvme_alloc_host_mem_single() -> sets dev->hmb_sgt
nvme_set_host_mem() -> fails with -EIO
nvme_free_host_mem() -> frees hmb_sgt, but does NOT NULL it
return error
nvme_probe() error path:
nvme_free_host_mem() -> dev->hmb_sgt is stale, use-after-free
The second call dereferences the freed sgt, causing a NULL pointer
dereference in iommu_dma_free_noncontiguous() when it accesses
sgt->sgl->dma_address (the backing memory has been freed and zeroed).
This is reproducible on Thunderbolt-attached NVMe devices (e.g., OWC
Envoy Express behind a Dell WD22TB4 dock) where the device intermittently
returns I/O errors during HMB setup due to PCIe link instability.
BUG: kernel NULL pointer dereference, address: 0000000000000010
RIP: 0010:iommu_dma_free_noncontiguous+0x22/0x80
Call Trace:
<TASK>
dma_free_noncontiguous+0x3b/0x130
nvme_free_host_mem+0x30/0xf0 [nvme]
nvme_probe.cold+0xcc/0x275 [nvme]
local_pci_probe+0x43/0xa0
pci_device_probe+0xeea/0x290
really_probe+0xf9/0x3b0
__driver_probe_device+0x8b/0x170
driver_probe_device+0x24/0xd0
__driver_attach_async_helper+0x6b/0x110
async_run_entry_fn+0x37/0x170
process_one_work+0x1ac/0x3d0
worker_thread+0x1b8/0x360
kthread+0xf7/0x130
ret_from_fork+0x2d8/0x3a0
ret_from_fork_asm+0x1a/0x30
</TASK>
Fix this by setting dev->hmb_sgt to NULL after freeing it, so the
second call takes the multi-descriptor path which safely handles the
already-cleaned-up state. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/hv-gpci: fix preempt count leak in sysfs show paths
Four sysfs show() callbacks in hv-gpci take get_cpu_var(hv_gpci_reqb)
(which calls preempt_disable()) but only call the matching put_cpu_var()
on the error path under the 'out:' label. Every successful read leaks
one preempt_disable():
processor_bus_topology_show()
processor_config_show()
affinity_domain_via_virtual_processor_show()
affinity_domain_via_domain_show()
(affinity_domain_via_partition_show() was already correct.)
On a CONFIG_PREEMPT=y kernel, repeated reads raise preempt_count and
eventually return to userspace with preemption still disabled. The
next user-mode page fault then hits faulthandler_disabled() == 1,
gets forced to SIGSEGV, and the resulting coredump trips
'BUG: scheduling while atomic' in call_usermodehelper_exec ->
wait_for_completion_state -> schedule:
BUG: scheduling while atomic: <task>/<pid>/0x00000004
...
__schedule_bug+0x6c/0x90
__schedule+0x58c/0x13a0
schedule+0x48/0x1a0
schedule_timeout+0x104/0x170
wait_for_completion_state+0x16c/0x330
call_usermodehelper_exec+0x254/0x2d0
vfs_coredump+0x1050/0x2590
get_signal+0xb9c/0xc80
do_notify_resume+0xf8/0x470
Add an out_success label that calls put_cpu_var() before returning
the byte count, mirroring affinity_domain_via_partition_show(). |
