| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Issue summary: When using the low-level OCB API directly with AES-NI or<br>other hardware-accelerated code paths, inputs whose length is not a multiple<br>of 16 bytes can leave the final partial block unencrypted and unauthenticated.<br><br>Impact summary: The trailing 1-15 bytes of a message may be exposed in<br>cleartext on encryption and are not covered by the authentication tag,<br>allowing an attacker to read or tamper with those bytes without detection.<br><br>The low-level OCB encrypt and decrypt routines in the hardware-accelerated<br>stream path process full 16-byte blocks but do not advance the input/output<br>pointers. The subsequent tail-handling code then operates on the original<br>base pointers, effectively reprocessing the beginning of the buffer while<br>leaving the actual trailing bytes unprocessed. The authentication checksum<br>also excludes the true tail bytes.<br><br>However, typical OpenSSL consumers using EVP are not affected because the<br>higher-level EVP and provider OCB implementations split inputs so that full<br>blocks and trailing partial blocks are processed in separate calls, avoiding<br>the problematic code path. Additionally, TLS does not use OCB ciphersuites.<br>The vulnerability only affects applications that call the low-level<br>CRYPTO_ocb128_encrypt() or CRYPTO_ocb128_decrypt() functions directly with<br>non-block-aligned lengths in a single call on hardware-accelerated builds.<br>For these reasons the issue was assessed as Low severity.<br><br>The FIPS modules in 3.6, 3.5, 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected<br>by this issue, as OCB mode is not a FIPS-approved algorithm.<br><br>OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0 and 1.1.1 are vulnerable to this issue.<br><br>OpenSSL 1.0.2 is not affected by this issue. |
| Issue summary: Calling PKCS12_get_friendlyname() function on a maliciously
crafted PKCS#12 file with a BMPString (UTF-16BE) friendly name containing
non-ASCII BMP code point can trigger a one byte write before the allocated
buffer.
Impact summary: The out-of-bounds write can cause a memory corruption
which can have various consequences including a Denial of Service.
The OPENSSL_uni2utf8() function performs a two-pass conversion of a PKCS#12
BMPString (UTF-16BE) to UTF-8. In the second pass, when emitting UTF-8 bytes,
the helper function bmp_to_utf8() incorrectly forwards the remaining UTF-16
source byte count as the destination buffer capacity to UTF8_putc(). For BMP
code points above U+07FF, UTF-8 requires three bytes, but the forwarded
capacity can be just two bytes. UTF8_putc() then returns -1, and this negative
value is added to the output length without validation, causing the
length to become negative. The subsequent trailing NUL byte is then written
at a negative offset, causing write outside of heap allocated buffer.
The vulnerability is reachable via the public PKCS12_get_friendlyname() API
when parsing attacker-controlled PKCS#12 files. While PKCS12_parse() uses a
different code path that avoids this issue, PKCS12_get_friendlyname() directly
invokes the vulnerable function. Exploitation requires an attacker to provide
a malicious PKCS#12 file to be parsed by the application and the attacker
can just trigger a one zero byte write before the allocated buffer.
For that reason the issue was assessed as Low severity according to our
Security Policy.
The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue,
as the PKCS#12 implementation is outside the OpenSSL FIPS module boundary.
OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0 and 1.1.1 are vulnerable to this issue.
OpenSSL 1.0.2 is not affected by this issue. |
| Issue summary: A type confusion vulnerability exists in the TimeStamp Response
verification code where an ASN1_TYPE union member is accessed without first
validating the type, causing an invalid or NULL pointer dereference when
processing a malformed TimeStamp Response file.
Impact summary: An application calling TS_RESP_verify_response() with a
malformed TimeStamp Response can be caused to dereference an invalid or
NULL pointer when reading, resulting in a Denial of Service.
The functions ossl_ess_get_signing_cert() and ossl_ess_get_signing_cert_v2()
access the signing cert attribute value without validating its type.
When the type is not V_ASN1_SEQUENCE, this results in accessing invalid memory
through the ASN1_TYPE union, causing a crash.
Exploiting this vulnerability requires an attacker to provide a malformed
TimeStamp Response to an application that verifies timestamp responses. The
TimeStamp protocol (RFC 3161) is not widely used and the impact of the
exploit is just a Denial of Service. For these reasons the issue was
assessed as Low severity.
The FIPS modules in 3.5, 3.4, 3.3 and 3.0 are not affected by this issue,
as the TimeStamp Response implementation is outside the OpenSSL FIPS module
boundary.
OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0 and 1.1.1 are vulnerable to this issue.
OpenSSL 1.0.2 is not affected by this issue. |
| The vulnerability stems from an incorrect error-checking logic in the CreateCounter() function (in threadx/utility/rtos_compatibility_layers/OSEK/tx_osek.c) when handling the return value of osek_get_counter(). Specifically, the current code checks if cntr_id equals 0u to determine failure, but @osek_get_counter() actually returns E_OS_SYS_STACK (defined as 12U) when it fails. This mismatch causes the error branch to never execute even when the counter pool is exhausted.
As a result, when the counter pool is depleted, the code proceeds to cast the error code (12U) to a pointer (OSEK_COUNTER *), creating a wild pointer. Subsequent writes to members of this pointer lead to writes to illegal memory addresses (e.g., 0x0000000C), which can trigger immediate HardFaults or silent memory corruption.
This vulnerability poses significant risks, including potential denial-of-service attacks (via repeated calls to exhaust the counter pool) and unauthorized memory access. |
| The Database for Contact Form 7, WPforms, Elementor forms plugin for WordPress is vulnerable to authorization bypass due to missing capability checks on the CSV export functionality in all versions up to, and including, 1.4.5. This makes it possible for unauthenticated attackers to download sensitive form submission data containing personally identifiable information (PII) by accessing the CSV export endpoint with an export key that is exposed in publicly accessible page source code. The vulnerability is created because while the shortcode properly filters displayed entries by user, the CSV export handler completely bypasses this filtering and exports all entries regardless of user permissions. |
| Kyverno is a policy engine designed for cloud native platform engineering teams. Versions prior to 1.16.3 and 1.15.3 have a critical authorization boundary bypass in namespaced Kyverno Policy apiCall. The resolved `urlPath` is executed using the Kyverno admission controller ServiceAccount, with no enforcement that the request is limited to the policy’s namespace. As a result, any authenticated user with permission to create a namespaced Policy can cause Kyverno to perform Kubernetes API requests using Kyverno’s admission controller identity, targeting any API path allowed by that ServiceAccount’s RBAC. This breaks namespace isolation by enabling cross-namespace reads (for example, ConfigMaps and, where permitted, Secrets) and allows cluster-scoped or cross-namespace writes (for example, creating ClusterPolicies) by controlling the urlPath through context variable substitution. Versions 1.16.3 and 1.15.3 contain a patch for the vulnerability. |
| Suricata is a network IDS, IPS and NSM engine. Prior to versions 8.0.3 and 7.0.14, crafted DCERPC traffic can cause Suricata to expand a buffer w/o limits, leading to memory exhaustion and the process getting killed. While reported for DCERPC over UDP, it is believed that DCERPC over TCP and SMB are also vulnerable. DCERPC/TCP in the default configuration should not be vulnerable as the default stream depth is limited to 1MiB. Versions 8.0.3 and 7.0.14 contain a patch. Some workarounds are available. For DCERPC/UDP, disable the parser. For DCERPC/TCP, the `stream.reassembly.depth` setting will limit the amount of data that can be buffered. For DCERPC/SMB, the `stream.reassembly.depth` can be used as well, but is set to unlimited by default. Imposing a limit here may lead to loss of visibility in SMB. |
| Issue summary: A type confusion vulnerability exists in the signature
verification of signed PKCS#7 data where an ASN1_TYPE union member is
accessed without first validating the type, causing an invalid or NULL
pointer dereference when processing malformed PKCS#7 data.
Impact summary: An application performing signature verification of PKCS#7
data or calling directly the PKCS7_digest_from_attributes() function can be
caused to dereference an invalid or NULL pointer when reading, resulting in
a Denial of Service.
The function PKCS7_digest_from_attributes() accesses the message digest attribute
value without validating its type. When the type is not V_ASN1_OCTET_STRING,
this results in accessing invalid memory through the ASN1_TYPE union, causing
a crash.
Exploiting this vulnerability requires an attacker to provide a malformed
signed PKCS#7 to an application that verifies it. The impact of the
exploit is just a Denial of Service, the PKCS7 API is legacy and applications
should be using the CMS API instead. For these reasons the issue was
assessed as Low severity.
The FIPS modules in 3.5, 3.4, 3.3 and 3.0 are not affected by this issue,
as the PKCS#7 parsing implementation is outside the OpenSSL FIPS module
boundary.
OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue. |
| SandboxJS is a JavaScript sandboxing library. Versions prior to 0.8.26 have a sandbox escape vulnerability due to `AsyncFunction` not being isolated in `SandboxFunction`. The library attempts to sandbox code execution by replacing the global `Function` constructor with a safe, sandboxed version (`SandboxFunction`). This is handled in `utils.ts` by mapping `Function` to `sandboxFunction` within a map used for lookups. However, before version 0.8.26, the library did not include mappings for `AsyncFunction`, `GeneratorFunction`, and `AsyncGeneratorFunction`. These constructors are not global properties but can be accessed via the `.constructor` property of an instance (e.g., `(async () => {}).constructor`). In `executor.ts`, property access is handled. When code running inside the sandbox accesses `.constructor` on an async function (which the sandbox allows creating), the `executor` retrieves the property value. Since `AsyncFunction` was not in the safe-replacement map, the `executor` returns the actual native host `AsyncFunction` constructor. Constructors for functions in JavaScript (like `Function`, `AsyncFunction`) create functions that execute in the global scope. By obtaining the host `AsyncFunction` constructor, an attacker can create a new async function that executes entirely outside the sandbox context, bypassing all restrictions and gaining full access to the host environment (Remote Code Execution). Version 0.8.26 patches this vulnerability. |
| Squidex is an open source headless content management system and content management hub. Versions of the application up to and including 7.21.0 allow users to define "Webhooks" as actions within the Rules engine. The url parameter in the webhook configuration does not appear to validate or restrict destination IP addresses. It accepts local addresses such as 127.0.0.1 or localhost. When a rule is triggered (Either manual trigger by manually calling the trigger endpoint or by a content update or any other triggers), the backend server executes an HTTP request to the user-supplied URL. Crucially, the server logs the full HTTP response in the rule execution log (lastDump field), which is accessible via the API. Which turns a "Blind" SSRF into a "Full Read" SSRF. As of time of publication, no patched versions are available. |
| Ghost is an open source content management system. In Ghost versions 5.43.0 through 5.12.04 and 6.0.0 through 6.14.0, an attacker was able to craft a malicious link that, when accessed by an authenticated staff user or member, would execute JavaScript with the victim's permissions, potentially leading to account takeover. Ghost Portal versions 2.29.1 through 2.51.4 and 2.52.0 through 2.57.0 were vulnerable to this issue. Ghost automatically loads the latest patch of the members Portal component via CDN. For Ghost 5.x users, upgrading to v5.121.0 or later fixes the vulnerability. v5.121.0 loads Portal v2.51.5, which contains the patch. For Ghost 6.x users, upgrading to v6.15.0 or later fixes the vulnerability. v6.15.0 loads Portal v2.57.1, which contains the patch. For Ghost installations using a customized or self-hosted version of Portal, it will be necessary to manually rebuild from or update to the latest patch version. |
| soroban-fixed-point-math is a fixed-point math library for Soroban smart contacts. In versions 1.3.0 and 1.4.0, the `mulDiv(x, y, z)` function incorrectly handled cases where both the intermediate product $x * y$ and the divisor $z$ were negative. The logic assumed that if the intermediate product was negative, the final result must also be negative, neglecting the sign of $z$. This resulted in rounding being applied in the wrong direction for cases where both $x * y$ and $z$ were negative. The functions most at risk are `fixed_div_floor` and `fixed_div_ceil`, as they often use non-constant numbers as the divisor $z$ in `mulDiv`. This error is present in all signed `FixedPoint` and `SorobanFixedPoint` implementations, including `i64`, `i128`, and `I256`. Versions 1.3.1 and 1.4.1 contain a patch. No known workarounds for this issue are available. |
| Clatter is a no_std compatible, pure Rust implementation of the Noise protocol framework with post-quantum support. Versiosn prior to2.2.0 have a protocol compliance vulnerability. The library allowed post-quantum handshake patterns that violated the PSK validity rule (Noise Protocol Framework Section 9.3). This could allow PSK-derived keys to be used for encryption without proper randomization by self-chosen ephemeral randomness, weakening security guarantees and potentially allowing catastrophic key reuse. Affected default patterns include `noise_pqkk_psk0`, `noise_pqkn_psk0`, `noise_pqnk_psk0`, `noise_pqnn_psk0``, and some hybrid variants. Users of these patterns may have been using handshakes that do not meet the intended security properties. The issue is fully patched and released in Clatter v2.2.0. The fixed version includes runtime checks to detect offending handshake patterns. As a workaround, avoid using offending `*_psk0` variants of post-quantum patterns. Review custom handshake patterns carefully. |
| The ML-DSA crate is a Rust implementation of the Module-Lattice-Based Digital Signature Standard (ML-DSA). Starting in version 0.0.4 and prior to version 0.1.0-rc.4, the ML-DSA signature verification implementation in the RustCrypto `ml-dsa` crate incorrectly accepts signatures with repeated (duplicate) hint indices. According to the ML-DSA specification (FIPS 204 / RFC 9881), hint indices within each polynomial must be **strictly increasing**. The current implementation uses a non-strict monotonic check (`<=` instead of `<`), allowing duplicate indices. This is a regression bug. The original implementation was correct, but a commit in version 0.0.4 inadvertently changed the strict `<` comparison to `<=`, introducing the vulnerability. Version 0.1.0-rc.4 fixes the issue. |
| The Snow Monkey Forms plugin for WordPress is vulnerable to arbitrary file deletion due to insufficient file path validation in the 'generate_user_dirpath' function in all versions up to, and including, 12.0.3. This makes it possible for unauthenticated attackers to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php). |
| Podman Desktop is a graphical tool for developing on containers and Kubernetes. A critical authentication bypass vulnerability in Podman Desktop prior to version 1.25.1 allows any extension to completely circumvent permission checks and gain unauthorized access to all authentication sessions. The `isAccessAllowed()` function unconditionally returns `true`, enabling malicious extensions to impersonate any user, hijack authentication sessions, and access sensitive resources without authorization. This vulnerability affects all versions of Podman Desktop. Version 1.25.1 contains a patch for the issue. |
| A weakness has been identified in Open5GS up to 2.7.6. This vulnerability affects the function sgwc_s5c_handle_modify_bearer_response of the file src/sgwc/s5c-handler.c of the component SGWC. Executing a manipulation can lead to denial of service. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks. This patch is called b19cf6a. Applying a patch is advised to resolve this issue. The issue report is flagged as already-fixed. |
| A vulnerability was identified in D-Link DCS-700L 1.03.09. The affected element is the function uploadmusic of the file /setUploadMusic of the component Music File Upload Service. The manipulation of the argument UploadMusic leads to path traversal. The attack can only be initiated within the local network. The exploit is publicly available and might be used. This vulnerability only affects products that are no longer supported by the maintainer. |
| A security flaw has been discovered in code-projects Online Music Site 1.0. The impacted element is an unknown function of the file /Administrator/PHP/AdminAddCategory.php. The manipulation results in sql injection. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks. |
| A weakness has been identified in code-projects Online Music Site 1.0. This affects an unknown function of the file /Administrator/PHP/AdminEditUser.php. This manipulation of the argument ID causes sql injection. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. |
