| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix infinite loop caused by next_smb2_rcv_hdr_off reset in error paths
The problem occurs when a signed request fails smb2 signature verification
check. In __process_request(), if check_sign_req() returns an error,
set_smb2_rsp_status(work, STATUS_ACCESS_DENIED) is called.
set_smb2_rsp_status() set work->next_smb2_rcv_hdr_off as zero. By resetting
next_smb2_rcv_hdr_off to zero, the pointer to the next command in the chain
is lost. Consequently, is_chained_smb2_message() continues to point to
the same request header instead of advancing. If the header's NextCommand
field is non-zero, the function returns true, causing __handle_ksmbd_work()
to repeatedly process the same failed request in an infinite loop.
This results in the kernel log being flooded with "bad smb2 signature"
messages and high CPU usage.
This patch fixes the issue by changing the return value from
SERVER_HANDLER_CONTINUE to SERVER_HANDLER_ABORT. This ensures that
the processing loop terminates immediately rather than attempting to
continue from an invalidated offset. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix UAF issue for file-backed mounts w/ directio option
[ 9.269940][ T3222] Call trace:
[ 9.269948][ T3222] ext4_file_read_iter+0xac/0x108
[ 9.269979][ T3222] vfs_iocb_iter_read+0xac/0x198
[ 9.269993][ T3222] erofs_fileio_rq_submit+0x12c/0x180
[ 9.270008][ T3222] erofs_fileio_submit_bio+0x14/0x24
[ 9.270030][ T3222] z_erofs_runqueue+0x834/0x8ac
[ 9.270054][ T3222] z_erofs_read_folio+0x120/0x220
[ 9.270083][ T3222] filemap_read_folio+0x60/0x120
[ 9.270102][ T3222] filemap_fault+0xcac/0x1060
[ 9.270119][ T3222] do_pte_missing+0x2d8/0x1554
[ 9.270131][ T3222] handle_mm_fault+0x5ec/0x70c
[ 9.270142][ T3222] do_page_fault+0x178/0x88c
[ 9.270167][ T3222] do_translation_fault+0x38/0x54
[ 9.270183][ T3222] do_mem_abort+0x54/0xac
[ 9.270208][ T3222] el0_da+0x44/0x7c
[ 9.270227][ T3222] el0t_64_sync_handler+0x5c/0xf4
[ 9.270253][ T3222] el0t_64_sync+0x1bc/0x1c0
EROFS may encounter above panic when enabling file-backed mount w/
directio mount option, the root cause is it may suffer UAF in below
race condition:
- z_erofs_read_folio wq s_dio_done_wq
- z_erofs_runqueue
- erofs_fileio_submit_bio
- erofs_fileio_rq_submit
- vfs_iocb_iter_read
- ext4_file_read_iter
- ext4_dio_read_iter
- iomap_dio_rw
: bio was submitted and return -EIOCBQUEUED
- dio_aio_complete_work
- dio_complete
- dio->iocb->ki_complete (erofs_fileio_ki_complete())
- kfree(rq)
: it frees iocb, iocb.ki_filp can be UAF in file_accessed().
- file_accessed
: access NULL file point
Introduce a reference count in struct erofs_fileio_rq, and initialize it
as two, both erofs_fileio_ki_complete() and erofs_fileio_rq_submit() will
decrease reference count, the last one decreasing the reference count
to zero will free rq. |
| The WP-DownloadManager plugin for WordPress is vulnerable to Path Traversal in all versions up to, and including, 1.69 via the 'download_path' configuration parameter. This is due to insufficient validation of the download path setting, which allows directory traversal sequences to bypass the WP_CONTENT_DIR prefix check. This makes it possible for authenticated attackers, with Administrator-level access and above, to configure the plugin to list and access arbitrary files on the server by exploiting the file browser functionality. |
| Improper Input Validation vulnerability in Apache Tomcat Native, Apache Tomcat.
When using an OCSP responder, Tomcat Native (and Tomcat's FFM port of the Tomcat Native code) did not complete verification or freshness checks on the OCSP response which could allow certificate revocation to be bypassed.
This issue affects Apache Tomcat Native: from 1.3.0 through 1.3.4, from 2.0.0 through 2.0.11; Apache Tomcat: from 11.0.0-M1 through 11.0.17, from 10.1.0-M7 through 10.1.51, from 9.0.83 through 9.0.114.
The following versions were EOL at the time the CVE was created but are
known to be affected: from 1.1.23 through 1.1.34, from 1.2.0 through 1.2.39. Older EOL versions are not affected.
Apache Tomcat Native users are recommended to upgrade to versions 1.3.5 or later or 2.0.12 or later, which fix the issue.
Apache Tomcat users are recommended to upgrade to versions 11.0.18 or later, 10.1.52 or later or 9.0.115 or later which fix the issue. |
| A security vulnerability has been detected in Sciyon Koyuan Thermoelectricity Heat Network Management System 3.0. This affects an unknown part of the file /SISReport/WebReport20/Proxy/AsyncTreeProxy.aspx. The manipulation of the argument PGUID leads to sql injection. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was detected in Blossom up to 1.17.1. This vulnerability affects the function content of the file blossom-backend/backend/src/main/java/com/blossom/backend/server/article/draft/ArticleController.java of the component Article Title Handler. The manipulation results in cross site scripting. The attack can be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A weakness has been identified in jishi node-sonos-http-api up to 3776f0ee2261c924c7b7204de121a38100a08ca7. Affected is the function Promise of the file lib/tts-providers/mac-os.js of the component TTS Provider. This manipulation of the argument phrase causes os command injection. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. This product is using a rolling release to provide continious delivery. Therefore, no version details for affected nor updated releases are available. The project was informed of the problem early through an issue report but has not responded yet. |
| The Gutenberg Blocks with AI by Kadence WP plugin for WordPress is vulnerable to Missing Authorization in all versions up to, and including, 3.6.1. This is due to a missing capability check in the `process_image_data_ajax_callback()` function which handles the `kadence_import_process_image_data` AJAX action. The function's authorization check via `verify_ajax_call()` only validates `edit_posts` capability but fails to check for the `upload_files` capability. This makes it possible for authenticated attackers, with Contributor-level access and above, to upload arbitrary images from remote URLs to the WordPress Media Library, bypassing the standard WordPress capability restriction that prevents Contributors from uploading files. |
| A flaw has been found in ChaiScript up to 6.1.0. This affects the function chaiscript::Type_Info::bare_equal of the file include/chaiscript/dispatchkit/type_info.hpp. This manipulation causes use after free. The attack requires local access. The attack's complexity is rated as high. The exploitability is reported as difficult. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| Moxa Arm-based industrial computers running Moxa Industrial Linux Secure use a device-unique bootloader password provided on the device. An attacker with physical access to the device could use this information to access the bootloader menu via a serial interface. Access to the bootloader menu does not allow full system takeover or privilege escalation. The bootloader enforces digital signature verification and only permits flashing of Moxa-signed images. As a result, an attacker cannot install malicious firmware or execute arbitrary code. The primary impact is limited to a potential temporary denial-of-service condition if a valid image is reflashed. Remote exploitation is not possible. |
| An Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability [CWE-79] vulnerability in Fortinet FortiSandbox 5.0.0 through 5.0.1, FortiSandbox 4.4.0 through 4.4.7, FortiSandbox 4.2 all versions, FortiSandbox 4.0 all versions may allow an unauthenticated attacker to execute commands via crafted requests. |
| HarfBuzz is a text shaping engine. Prior to version 12.3.0, a null pointer dereference vulnerability exists in the SubtableUnicodesCache::create function located in src/hb-ot-cmap-table.hh. The function fails to check if hb_malloc returns NULL before using placement new to construct an object at the returned pointer address. When hb_malloc fails to allocate memory (which can occur in low-memory conditions or when using custom allocators that simulate allocation failures), it returns NULL. The code then attempts to call the constructor on this null pointer using placement new syntax, resulting in undefined behavior and a Segmentation Fault. This issue has been patched in version 12.3.0. |
| The html.Parse function in golang.org/x/net/html has quadratic parsing complexity when processing certain inputs, which can lead to denial of service (DoS) if an attacker provides specially crafted HTML content. |
| Nebula is a scalable overlay networking tool. In versions from 1.7.0 to 1.10.2, when using P256 certificates (which is not the default configuration), it is possible to evade a blocklist entry created against the fingerprint of a certificate by using ECDSA Signature Malleability to use a copy of the certificate with a different fingerprint. This issue has been patched in version 1.10.3. |
| n8n is an open source workflow automation platform. From version 1.65.0 to before 1.114.3, the use of Buffer.allocUnsafe() and Buffer.allocUnsafeSlow() in the task runner allowed untrusted code to allocate uninitialized memory. Such uninitialized buffers could contain residual data from within the same Node.js process (for example, data from prior requests, tasks, secrets, or tokens), resulting in potential information disclosure. This issue has been patched in version 1.114.3. |
| The html.Parse function in golang.org/x/net/html has an infinite parsing loop when processing certain inputs, which can lead to denial of service (DoS) if an attacker provides specially crafted HTML content. |
| Mailpit is an email testing tool and API for developers. Prior to version 1.28.2, the Mailpit WebSocket server is configured to accept connections from any origin. This lack of Origin header validation introduces a Cross-Site WebSocket Hijacking (CSWSH) vulnerability. An attacker can host a malicious website that, when visited by a developer running Mailpit locally, establishes a WebSocket connection to the victim's Mailpit instance (default ws://localhost:8025). This allows the attacker to intercept sensitive data such as email contents, headers, and server statistics in real-time. This issue has been patched in version 1.28.2. |
| A reflected cross-site scripting (XSS) vulnerability in the PDF export functionality of the TYDAC AG MAP+ solution allows unauthenticated attackers to craft a malicious URL, that if visited by a victim, will execute arbitrary JavaScript in the victim's context. Such a URL could be delivered through various means, for instance, by sending a link or by tricking victims to visit a page crafted by the attacker.
This issue was verified in MAP+: 3.4.0. |
| virtualenv is a tool for creating isolated virtual python environments. Prior to version 20.36.1, TOCTOU (Time-of-Check-Time-of-Use) vulnerabilities in virtualenv allow local attackers to perform symlink-based attacks on directory creation operations. An attacker with local access can exploit a race condition between directory existence checks and creation to redirect virtualenv's app_data and lock file operations to attacker-controlled locations. This issue has been patched in version 20.36.1. |
| Skipper is an HTTP router and reverse proxy for service composition. Prior to version 0.24.0, when running Skipper as an Ingress controller, users with permissions to create an Ingress and a Service of type ExternalName can create routes that enable them to use Skipper's network access to reach internal services. Version 0.24.0 disables Kubernetes ExternalName by default. As a workaround, developers can allow list targets of an ExternalName and allow list via regular expressions. |
