| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A weakness has been identified in Edimax BR-6675nD 1.12. This impacts the function formWpsStart of the file /goform/formWpsStart of the component POST Request Handler. This manipulation of the argument pinCode causes command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was determined in Totolink A8000RU 7.1cu.643_b20200521. This issue affects the function setTracerouteCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. This manipulation of the argument command causes os command injection. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized. |
| A vulnerability was determined in Besen BS20 EV Charging Station up to 20260426. This impacts an unknown function of the component Bluetooth Low Energy Handler. Executing a manipulation can lead to weak password requirements. The attack needs to be done within the local network. This attack is characterized by high complexity. The exploitability is said to be difficult. The original disclosure mentions, that "[t]hese vulnerabilities have been reported to Besen and we have received their acknowlegement that they are reviewing this as of April 2026." |
| A flaw has been found in Edimax BR-6675nD 1.12. This issue affects the function formUSBStorage of the file /goform/formUSBStorage of the component POST Request Handler. Executing a manipulation of the argument sub_dir can lead to command injection. It is possible to launch the attack remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A weakness has been identified in Totolink A8000RU 7.1cu.643_b20200521. Affected is the function setRemoteCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Executing a manipulation of the argument enable can lead to os command injection. The attack can be executed remotely. The exploit has been made available to the public and could be used for attacks. |
| A vulnerability was determined in SourceCodester Indian Invoicing System 1.0. Impacted is an unknown function of the component Backend Endpoint. Executing a manipulation can lead to improper access controls. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. Multiple endpoints are affected. |
| A flaw has been found in code-projects Employee Management System 1.0. Affected by this vulnerability is an unknown functionality of the file /changepassemp.php. Executing a manipulation of the argument ID can lead to cross site scripting. The attack may be performed from remote. The exploit has been published and may be used. |
| A weakness has been identified in Edimax EW-7438RPn 1.31. The affected element is the function formWlanMP of the file /goform/formWlanMP of the component Content-Type Handler. Executing a manipulation of the argument ateFunc/ateGain/ateTxCount/ateChan/ateRate/ateMacID/e2pTxPower1/e2pTxPower2/e2pTxPower3/e2pTxPower4/e2pTxPower5/e2pTxPower6/e2pTxPower7/e2pTx2Power1/e2pTx2Power2/e2pTx2Power3/e2pTx2Power4/e2pTx2Power5/e2pTx2Power6/e2pTx2Power7/ateTxFreqOffset/ateMode/ateBW/ateAntenna/e2pTxFreqOffset/e2pTxPwDeltaB/e2pTxPwDeltaG/e2pTxPwDeltaMix/e2pTxPwDeltaN/readE2P can lead to os command injection. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| The Magic Link authentication flow accepts multiple invalid authentication requests without adequate rate limiting or resource control, leading to uncontrolled memory usage growth.
This vulnerability can result in a denial-of-service condition, causing service unavailability for deployments that utilize the Magic Link authenticator. The impact is limited to these specific deployments and requires repeated invalid authentication attempts to trigger. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Preserve id of register in sync_linked_regs()
sync_linked_regs() copies the id of known_reg to reg when propagating
bounds of known_reg to reg using the off of known_reg, but when
known_reg was linked to reg like:
known_reg = reg ; both known_reg and reg get same id
known_reg += 4 ; known_reg gets off = 4, and its id gets BPF_ADD_CONST
now when a call to sync_linked_regs() happens, let's say with the following:
if known_reg >= 10 goto pc+2
known_reg's new bounds are propagated to reg but now reg gets
BPF_ADD_CONST from the copy.
This means if another link to reg is created like:
another_reg = reg ; another_reg should get the id of reg but
assign_scalar_id_before_mov() sees
BPF_ADD_CONST on reg and assigns a new id to it.
As reg has a new id now, known_reg's link to reg is broken. If we find
new bounds for known_reg, they will not be propagated to reg.
This can be seen in the selftest added in the next commit:
0: (85) call bpf_get_prandom_u32#7 ; R0=scalar()
1: (57) r0 &= 255 ; R0=scalar(smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
2: (bf) r1 = r0 ; R0=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff)) R1=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
3: (07) r1 += 4 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=4,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
4: (a5) if r1 < 0xa goto pc+4 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=10,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
5: (bf) r2 = r0 ; R0=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=255) R2=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=255)
6: (a5) if r1 < 0xe goto pc+2 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=14,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
7: (35) if r0 >= 0xa goto pc+1 ; R0=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=9,var_off=(0x0; 0xf))
8: (37) r0 /= 0
div by zero
When 4 is verified, r1's bounds are propagated to r0 but r0 also gets
BPF_ADD_CONST (bug).
When 5 is verified, r0 gets a new id (2) and its link with r1 is broken.
After 6 we know r1 has bounds [14, 259] and therefore r0 should have
bounds [10, 255], therefore the branch at 7 is always taken. But because
r0's id was changed to 2, r1's new bounds are not propagated to r0.
The verifier still thinks r0 has bounds [6, 255] before 7 and execution
can reach div by zero.
Fix this by preserving id in sync_linked_regs() like off and subreg_def. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Fix slab-out-of-bounds read in DeleteIndexEntryRoot
In the 'DeleteIndexEntryRoot' case of the 'do_action' function, the
entry size ('esize') is retrieved from the log record without adequate
bounds checking.
Specifically, the code calculates the end of the entry ('e2') using:
e2 = Add2Ptr(e1, esize);
It then calculates the size for memmove using 'PtrOffset(e2, ...)',
which subtracts the end pointer from the buffer limit. If 'esize' is
maliciously large, 'e2' exceeds the used buffer size. This results in
a negative offset which, when cast to size_t for memmove, interprets
as a massive unsigned integer, leading to a heap buffer overflow.
This commit adds a check to ensure that the entry size ('esize') strictly
fits within the remaining used space of the index header before performing
memory operations. |
| Pi.Alert is a WIFI / LAN intruder detector with web service monitoring. From 2024-06-29 to before 2026-05-07, the web application endpoint is vulnerable to SQL injection. The /pialert/php/server/devices.php route accepts requests from unauthenticated users when the action URL parameter is set to getDevicesTotals. The scansource URL parameter is then injected in a SQL query. This vulnerability is fixed in 2026-05-07. |
| Perl versions through 5.43.10 have a heap buffer overflow when compiling regular expressions with a repeated fixed string on 32-bit builds.
Perl_study_chunk in regcomp_study.c checked the size of the joined substring buffer in characters rather than bytes. For a quantified fixed substring with a large minimum count, the byte length mincount * l could overflow SSize_t, producing an undersized SvGROW allocation; the subsequent copy writes past the end of the buffer.
A caller that compiles an attacker-controlled regular expression on a 32-bit perl build triggers a heap buffer overflow at compile time. |
| On 2026-05-11, between approximately 19:20 and 19:26 UTC, 84 malicious versions across 42 @tanstack/* packages were published to the npm registry. The publishes were authenticated via the legitimate GitHub Actions OIDC trusted-publisher binding for TanStack/router, but the publish workflow itself was not modified. The attacker chained three known vulnerability classes — a pull_request_target "Pwn Request" misconfiguration, GitHub Actions cache poisoning across the fork↔base trust boundary, and runtime memory extraction of the OIDC token from the Actions runner process — to publish credential-stealing malware under a trusted identity. Each affected package received exactly two malicious versions, published a few minutes apart. |
| Dalfox is a powerful open-source XSS scanner and utility focused on automation. Prior to 2.13.0, when dalfox is run in REST API server mode, the custom-payload-file field in model.Options is JSON-tagged and deserialized directly from the attacker's request body, then propagated unchanged through dalfox.Initialize into the scan engine. The engine passes the value to voltFile.ReadLinesOrLiteral, which reads lines from any file path accessible to the dalfox process and embeds each line as an XSS payload in outbound HTTP requests directed at the attacker-controlled target URL. Because the server has no API key by default, an unauthenticated network attacker can exfiltrate the contents of arbitrary files on the dalfox host by reading them line-by-line through scan traffic. This vulnerability is fixed in 2.13.0. |
| Gryph provides a security layer for AI coding agents. Prior to 0.7.0, Gryph implements logging levels that determine what content is logged to a local sqlite database. The README incorrectly mentions that the default log level is minimal while it is standard. Source code review shows sensitive file-write content remains in the stored payload as ContentPreview, OldString, or NewString at the default standard logging level and at full. This leads to logging of potentially sensitive file content in the local sqlite database, violating Gryphs sensitive file filter and log level contracts. This vulnerability is fixed in 0.7.0. |
| Streamlink is a CLI utility which pipes video streams from various services into a video player. Prior to 8.4.0, Streamlink's HLS and DASH parsers do not validate the URI scheme of segment entries and other resources. A remote .m3u8 HLS playlist or .mpd DASH manifest can list file:///path/to/file as a segment, and streamlink will read that local file and write its contents to the output stream. This vulnerability is fixed in 8.4.0. |
| A stored cross-site scripting (XSS) vulnerability in the /admin/config-module.php component of creatorsofcode simplephp GitHub commit 5184cff (Latest as of 2026-02-27) via injecting a crafted payload. |
| NewNTUnicodeString does not check for string length overflow. When provided with a string that overflows the maximum size of a NTUnicodeString (a 16-bit number of bytes), it returns a truncated string rather than an error. |
| In the Linux kernel, the following vulnerability has been resolved:
efi: Fix reservation of unaccepted memory table
The reserve_unaccepted() function incorrectly calculates the size of the
memblock reservation for the unaccepted memory table. It aligns the
size of the table, but fails to account for cases where the table's
starting physical address (efi.unaccepted) is not page-aligned.
If the table starts at an offset within a page and its end crosses into
a subsequent page that the aligned size does not cover, the end of the
table will not be reserved. This can lead to the table being overwritten
or inaccessible, causing a kernel panic in accept_memory().
This issue was observed when starting Intel TDX VMs with specific memory
sizes (e.g., > 64GB).
Fix this by calculating the end address first (including the unaligned
start) and then aligning it up, ensuring the entire range is covered
by the reservation. |
