| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Suricata is a network IDS, IPS and NSM engine. Prior to versions 8.0.3 and 7.0.14, crafted DCERPC traffic can cause Suricata to expand a buffer w/o limits, leading to memory exhaustion and the process getting killed. While reported for DCERPC over UDP, it is believed that DCERPC over TCP and SMB are also vulnerable. DCERPC/TCP in the default configuration should not be vulnerable as the default stream depth is limited to 1MiB. Versions 8.0.3 and 7.0.14 contain a patch. Some workarounds are available. For DCERPC/UDP, disable the parser. For DCERPC/TCP, the `stream.reassembly.depth` setting will limit the amount of data that can be buffered. For DCERPC/SMB, the `stream.reassembly.depth` can be used as well, but is set to unlimited by default. Imposing a limit here may lead to loss of visibility in SMB. |
| Issue summary: A type confusion vulnerability exists in the signature
verification of signed PKCS#7 data where an ASN1_TYPE union member is
accessed without first validating the type, causing an invalid or NULL
pointer dereference when processing malformed PKCS#7 data.
Impact summary: An application performing signature verification of PKCS#7
data or calling directly the PKCS7_digest_from_attributes() function can be
caused to dereference an invalid or NULL pointer when reading, resulting in
a Denial of Service.
The function PKCS7_digest_from_attributes() accesses the message digest attribute
value without validating its type. When the type is not V_ASN1_OCTET_STRING,
this results in accessing invalid memory through the ASN1_TYPE union, causing
a crash.
Exploiting this vulnerability requires an attacker to provide a malformed
signed PKCS#7 to an application that verifies it. The impact of the
exploit is just a Denial of Service, the PKCS7 API is legacy and applications
should be using the CMS API instead. For these reasons the issue was
assessed as Low severity.
The FIPS modules in 3.5, 3.4, 3.3 and 3.0 are not affected by this issue,
as the PKCS#7 parsing implementation is outside the OpenSSL FIPS module
boundary.
OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue. |
| SandboxJS is a JavaScript sandboxing library. Versions prior to 0.8.26 have a sandbox escape vulnerability due to `AsyncFunction` not being isolated in `SandboxFunction`. The library attempts to sandbox code execution by replacing the global `Function` constructor with a safe, sandboxed version (`SandboxFunction`). This is handled in `utils.ts` by mapping `Function` to `sandboxFunction` within a map used for lookups. However, before version 0.8.26, the library did not include mappings for `AsyncFunction`, `GeneratorFunction`, and `AsyncGeneratorFunction`. These constructors are not global properties but can be accessed via the `.constructor` property of an instance (e.g., `(async () => {}).constructor`). In `executor.ts`, property access is handled. When code running inside the sandbox accesses `.constructor` on an async function (which the sandbox allows creating), the `executor` retrieves the property value. Since `AsyncFunction` was not in the safe-replacement map, the `executor` returns the actual native host `AsyncFunction` constructor. Constructors for functions in JavaScript (like `Function`, `AsyncFunction`) create functions that execute in the global scope. By obtaining the host `AsyncFunction` constructor, an attacker can create a new async function that executes entirely outside the sandbox context, bypassing all restrictions and gaining full access to the host environment (Remote Code Execution). Version 0.8.26 patches this vulnerability. |
| Squidex is an open source headless content management system and content management hub. Versions of the application up to and including 7.21.0 allow users to define "Webhooks" as actions within the Rules engine. The url parameter in the webhook configuration does not appear to validate or restrict destination IP addresses. It accepts local addresses such as 127.0.0.1 or localhost. When a rule is triggered (Either manual trigger by manually calling the trigger endpoint or by a content update or any other triggers), the backend server executes an HTTP request to the user-supplied URL. Crucially, the server logs the full HTTP response in the rule execution log (lastDump field), which is accessible via the API. Which turns a "Blind" SSRF into a "Full Read" SSRF. As of time of publication, no patched versions are available. |
| Ghost is an open source content management system. In Ghost versions 5.43.0 through 5.12.04 and 6.0.0 through 6.14.0, an attacker was able to craft a malicious link that, when accessed by an authenticated staff user or member, would execute JavaScript with the victim's permissions, potentially leading to account takeover. Ghost Portal versions 2.29.1 through 2.51.4 and 2.52.0 through 2.57.0 were vulnerable to this issue. Ghost automatically loads the latest patch of the members Portal component via CDN. For Ghost 5.x users, upgrading to v5.121.0 or later fixes the vulnerability. v5.121.0 loads Portal v2.51.5, which contains the patch. For Ghost 6.x users, upgrading to v6.15.0 or later fixes the vulnerability. v6.15.0 loads Portal v2.57.1, which contains the patch. For Ghost installations using a customized or self-hosted version of Portal, it will be necessary to manually rebuild from or update to the latest patch version. |
| soroban-fixed-point-math is a fixed-point math library for Soroban smart contacts. In versions 1.3.0 and 1.4.0, the `mulDiv(x, y, z)` function incorrectly handled cases where both the intermediate product $x * y$ and the divisor $z$ were negative. The logic assumed that if the intermediate product was negative, the final result must also be negative, neglecting the sign of $z$. This resulted in rounding being applied in the wrong direction for cases where both $x * y$ and $z$ were negative. The functions most at risk are `fixed_div_floor` and `fixed_div_ceil`, as they often use non-constant numbers as the divisor $z$ in `mulDiv`. This error is present in all signed `FixedPoint` and `SorobanFixedPoint` implementations, including `i64`, `i128`, and `I256`. Versions 1.3.1 and 1.4.1 contain a patch. No known workarounds for this issue are available. |
| Clatter is a no_std compatible, pure Rust implementation of the Noise protocol framework with post-quantum support. Versiosn prior to2.2.0 have a protocol compliance vulnerability. The library allowed post-quantum handshake patterns that violated the PSK validity rule (Noise Protocol Framework Section 9.3). This could allow PSK-derived keys to be used for encryption without proper randomization by self-chosen ephemeral randomness, weakening security guarantees and potentially allowing catastrophic key reuse. Affected default patterns include `noise_pqkk_psk0`, `noise_pqkn_psk0`, `noise_pqnk_psk0`, `noise_pqnn_psk0``, and some hybrid variants. Users of these patterns may have been using handshakes that do not meet the intended security properties. The issue is fully patched and released in Clatter v2.2.0. The fixed version includes runtime checks to detect offending handshake patterns. As a workaround, avoid using offending `*_psk0` variants of post-quantum patterns. Review custom handshake patterns carefully. |
| The ML-DSA crate is a Rust implementation of the Module-Lattice-Based Digital Signature Standard (ML-DSA). Starting in version 0.0.4 and prior to version 0.1.0-rc.4, the ML-DSA signature verification implementation in the RustCrypto `ml-dsa` crate incorrectly accepts signatures with repeated (duplicate) hint indices. According to the ML-DSA specification (FIPS 204 / RFC 9881), hint indices within each polynomial must be **strictly increasing**. The current implementation uses a non-strict monotonic check (`<=` instead of `<`), allowing duplicate indices. This is a regression bug. The original implementation was correct, but a commit in version 0.0.4 inadvertently changed the strict `<` comparison to `<=`, introducing the vulnerability. Version 0.1.0-rc.4 fixes the issue. |
| The Snow Monkey Forms plugin for WordPress is vulnerable to arbitrary file deletion due to insufficient file path validation in the 'generate_user_dirpath' function in all versions up to, and including, 12.0.3. This makes it possible for unauthenticated attackers to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php). |
| Podman Desktop is a graphical tool for developing on containers and Kubernetes. A critical authentication bypass vulnerability in Podman Desktop prior to version 1.25.1 allows any extension to completely circumvent permission checks and gain unauthorized access to all authentication sessions. The `isAccessAllowed()` function unconditionally returns `true`, enabling malicious extensions to impersonate any user, hijack authentication sessions, and access sensitive resources without authorization. This vulnerability affects all versions of Podman Desktop. Version 1.25.1 contains a patch for the issue. |
| A weakness has been identified in Open5GS up to 2.7.6. This vulnerability affects the function sgwc_s5c_handle_modify_bearer_response of the file src/sgwc/s5c-handler.c of the component SGWC. Executing a manipulation can lead to denial of service. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks. This patch is called b19cf6a. Applying a patch is advised to resolve this issue. The issue report is flagged as already-fixed. |
| A vulnerability was identified in D-Link DCS-700L 1.03.09. The affected element is the function uploadmusic of the file /setUploadMusic of the component Music File Upload Service. The manipulation of the argument UploadMusic leads to path traversal. The attack can only be initiated within the local network. The exploit is publicly available and might be used. This vulnerability only affects products that are no longer supported by the maintainer. |
| A security flaw has been discovered in code-projects Online Music Site 1.0. The impacted element is an unknown function of the file /Administrator/PHP/AdminAddCategory.php. The manipulation results in sql injection. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks. |
| A weakness has been identified in code-projects Online Music Site 1.0. This affects an unknown function of the file /Administrator/PHP/AdminEditUser.php. This manipulation of the argument ID causes sql injection. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. |
| A security vulnerability has been detected in code-projects Online Music Site 1.0. This impacts an unknown function of the file /Administrator/PHP/AdminReply.php. Such manipulation of the argument ID leads to sql injection. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. |
| A flaw was found in libsoup. An attacker who can control the input for the Content-Disposition header can inject CRLF (Carriage Return Line Feed) sequences into the header value. These sequences are then interpreted verbatim when the HTTP request or response is constructed, allowing arbitrary HTTP headers to be injected. This vulnerability can lead to HTTP header injection or HTTP response splitting without requiring authentication or user interaction. |
| A flaw was found in the libsoup HTTP library that can cause proxy authentication credentials to be sent to unintended destinations. When handling HTTP redirects, libsoup removes the Authorization header but does not remove the Proxy-Authorization header if the request is redirected to a different host. As a result, sensitive proxy credentials may be leaked to third-party servers. Applications using libsoup for HTTP communication may unintentionally expose proxy authentication data. |
| Improper Verification of Cryptographic Signature vulnerability in Drupal Drupal Commerce Paybox Commerce Paybox on Drupal 7.X allows Authentication Bypass.This issue affects Drupal Commerce Paybox: from 7-x-1.0 through 7.X-1.5. |
| Dell PremierColor Panel Driver, versions prior to 1.0.0.1 A01, contains an Improper Access Control vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of Privileges. |
| EPSON 1.124 contains an unquoted service path vulnerability in the SENADB service that allows local attackers to execute code with elevated system privileges. Attackers can exploit the unquoted path in C:\Program Files (x86)\EPSON_P2B\Printer Software\Status Monitor\ to inject malicious executables that will run with LocalSystem permissions. |
