| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| TBEA TLogger V2.1.0.0B0.0.0.0 exposes a UART interface on the device's circuit board without sufficient protection. A physically proximate attacker can connect to the UART interface and observe the device boot process and runtime debug output. The disclosed information includes operating system details, software versions, network configuration, filesystem paths, and other implementation and debugging information that may assist an attacker in further compromising the device. |
| An unauthenticated SQL injection vulnerability exists in the web server of TBEA TLogger V2.1.0.0B0.0.0.0. Multiple HTTP endpoints incorporate attacker-controlled parameters directly into SQLite queries without sufficient validation or parameterization. A remote unauthenticated attacker can exploit these endpoints to read, modify, or delete data stored in the device's CCU.db database. |
| In the Linux kernel, the following vulnerability has been resolved:
net: tap: NULL pointer derefence in dev_parse_header_protocol when skb->dev is null
Fixes a NULL pointer derefence bug triggered from tap driver.
When tap_get_user calls virtio_net_hdr_to_skb the skb->dev is null
(in tap.c skb->dev is set after the call to virtio_net_hdr_to_skb)
virtio_net_hdr_to_skb calls dev_parse_header_protocol which
needs skb->dev field to be valid.
The line that trigers the bug is in dev_parse_header_protocol
(dev is at offset 0x10 from skb and is stored in RAX register)
if (!dev->header_ops || !dev->header_ops->parse_protocol)
22e1: mov 0x10(%rbx),%rax
22e5: mov 0x230(%rax),%rax
Setting skb->dev before the call in tap.c fixes the issue.
BUG: kernel NULL pointer dereference, address: 0000000000000230
RIP: 0010:virtio_net_hdr_to_skb.constprop.0+0x335/0x410 [tap]
Code: c0 0f 85 b7 fd ff ff eb d4 41 39 c6 77 cf 29 c6 48 89 df 44 01 f6 e8 7a 79 83 c1 48 85 c0 0f 85 d9 fd ff ff eb b7 48 8b 43 10 <48> 8b 80 30 02 00 00 48 85 c0 74 55 48 8b 40 28 48 85 c0 74 4c 48
RSP: 0018:ffffc90005c27c38 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888298f25300 RCX: 0000000000000010
RDX: 0000000000000005 RSI: ffffc90005c27cb6 RDI: ffff888298f25300
RBP: ffffc90005c27c80 R08: 00000000ffffffea R09: 00000000000007e8
R10: ffff88858ec77458 R11: 0000000000000000 R12: 0000000000000001
R13: 0000000000000014 R14: ffffc90005c27e08 R15: ffffc90005c27cb6
FS: 0000000000000000(0000) GS:ffff88858ec40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000230 CR3: 0000000281408006 CR4: 00000000003706e0
Call Trace:
tap_get_user+0x3f1/0x540 [tap]
tap_sendmsg+0x56/0x362 [tap]
? get_tx_bufs+0xc2/0x1e0 [vhost_net]
handle_tx_copy+0x114/0x670 [vhost_net]
handle_tx+0xb0/0xe0 [vhost_net]
handle_tx_kick+0x15/0x20 [vhost_net]
vhost_worker+0x7b/0xc0 [vhost]
? vhost_vring_call_reset+0x40/0x40 [vhost]
kthread+0xfa/0x120
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dsi: don't dump registers past the mapped region
On DSI 6G platforms the IO address space is internally adjusted by
io_offset. Later this adjusted address might be used for memory dumping.
However the size that is used for memory dumping isn't adjusted to
account for the io_offset, leading to the potential access to the
unmapped region. Lower ctrl_size by the io_offset value to prevent
access past the mapped area.
msm_disp_snapshot_add_block+0x1d4/0x3c8 [msm] (P)
msm_dsi_host_snapshot+0x4c/0x78 [msm]
msm_dsi_snapshot+0x28/0x50 [msm]
msm_disp_snapshot_capture_state+0x74/0x140 [msm]
msm_disp_snapshot_state_sync+0x60/0x90 [msm]
_msm_disp_snapshot_work+0x30/0x90 [msm]
kthread_worker_fn+0xdc/0x460
kthread+0x120/0x140
Patchwork: https://patchwork.freedesktop.org/patch/721747/ |
| The Pixel Tag Manager for WooCommerce WordPress plugin before 2.2.1 does not perform an authorization check on one of its AJAX actions, allowing unauthenticated users to submit forged e-commerce conversion events to the site's configured server-side advertising conversion APIs using the site's stored credentials. |
| ScadaLTS 2.7.8.1 exposes a server-side method that lacks authorization checks, allowing any authenticated user (including one holding only low-privilege, read-only permissions) to execute arbitrary operating system commands on the host. Successful exploitation results in code execution in the context of the ScadaLTS server process (root), leading to full compromise of the underlying system. |
| RustFS is a distributed object storage system built in Rust. Prior to 1.0.0-beta.12, RustFS handles FTPS MKD in FtpsDriver::mkd in crates/protocols/src/ftps/driver.rs by calling storage.create_bucket without authorize_operation for S3Action::CreateBucket, allowing authenticated FTPS users denied s3:CreateBucket to create buckets. This issue is fixed in version 1.0.0-beta.12. |
| RustFS is a distributed object storage system built in Rust. Prior to 1.0.0-beta.12, RustFS evaluates the ForAllValues: and ForAnyValue: set qualifiers with the negated string operators StringNotEquals, StringNotEqualsIgnoreCase, StringNotLike, ArnNotEquals, and ArnNotLike using each other's semantics because crates/policy/src/policy/function/string.rs negates the aggregate result after eval or eval_like instead of negating each request-value predicate before quantification. Partially overlapping policy and request value sets can therefore make an Allow condition grant access to an excluded principal or make a Deny guardrail fail, including policies based on jwt:groups and jwt:roles; absent keys also receive the opposite ForAllValues: and ForAnyValue: behavior. This issue is fixed in version 1.0.0-beta.12. |
| Seerr is an open-source media request and discovery manager for Jellyfin, Plex, and Emby. Prior to version 3.4.0, Seerr's ImageProxy in server/lib/imageproxy.ts uses the upstream ETag and Content-Type response headers to build a cache filename for the unauthenticated GET /avatarproxy/:jellyfinUserId route, allowing a malicious or compromised Jellyfin or Emby server, or a man-in-the-middle attacker on a plaintext media-server connection, to supply traversal sequences that path.join and fs.writeFile normalize outside the cache directory, overwrite /app/dist/index.js or other files, and execute code as the node user after a container restart. This issue is fixed in version 3.4.0. |
| A Project Resource Manager may gain broader administrative privileges under specific conditions. |
| An unauthenticated user may access restricted repository information under specific conditions. |
| An authenticated user without repository read permission may access private NuGet metadata under specific conditions. |
| An authenticated user may view private Puppet module metadata without repository read access. |
| In WhatsUp Gold versions released before 2026.0.2, a privileged attacker can write arbitrary files to a web-accessible location on the host server. |
| In the Linux kernel, the following vulnerability has been resolved:
block: recompute nr_integrity_segments in blk_insert_cloned_request
blk_insert_cloned_request() already recomputes nr_phys_segments
against the bottom queue, because "the queue settings related to
segment counting may differ from the original queue." The exact same
reasoning applies to integrity segments: a stacked driver's underlying
queue can have tighter virt_boundary_mask, seg_boundary_mask, or
max_segment_size than the top queue, in which case
blk_rq_count_integrity_sg() against the bottom queue produces a
different count than the cached rq->nr_integrity_segments inherited
from the source request by blk_rq_prep_clone().
When the cached count is lower than the bottom queue's actual count,
blk_rq_map_integrity_sg() trips
BUG_ON(segments > rq->nr_integrity_segments);
on dispatch. The same families of stacked setups that motivated the
existing nr_phys_segments recompute -- dm-multipath fanning out to
nvme-rdma in particular -- can produce this.
Mirror the nr_phys_segments handling: when the request carries
integrity, recompute nr_integrity_segments against the bottom queue
and reject the request if it exceeds the bottom queue's
max_integrity_segments. blk_rq_count_integrity_sg() and
queue_max_integrity_segments() are both already available via
<linux/blk-integrity.h>, which blk-mq.c includes.
This closes a latent gap in the stacking contract and brings the
integrity-segment accounting in line with the existing
phys-segment accounting. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: uvc: hold opts->lock across XU walks in uvc_function_bind
uvc_function_bind() walks &opts->extension_units twice without holding
opts->lock:
- directly, for the iExtension string-descriptor fixup loop;
- indirectly, four times via uvc_copy_descriptors() (once per speed),
where the helper iterates uvc->desc.extension_units (which aliases
&opts->extension_units) to size and emit XU descriptors.
The configfs side (uvcg_extension_make / uvcg_extension_drop, in
drivers/usb/gadget/function/uvc_configfs.c) takes opts->lock around its
list_add_tail / list_del operations. A privileged userspace process
that holds the configfs subtree open and writes the gadget UDC name
to bind the function while concurrently rmdir()'ing an extensions
subdir can race uvcg_extension_drop() against the bind-time list walks
and dereference a freed struct uvcg_extension.
Hold opts->lock from the start of the XU string-descriptor fixup
through the last uvc_copy_descriptors() call, releasing on the
descriptor-error path via a new error_unlock label that drops the
lock before falling through to the existing error label. This
matches the locking discipline of the configfs callbacks and removes
the only remaining unsynchronised reader of the XU list during bind.
Reachability: only privileged processes that can mount configfs and
write to gadget UDC files can trigger the race, so this is a
correctness fix rather than a security boundary. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: serial: pch_uart: add check for dma_alloc_coherent()
Add a check for dma_alloc_coherent() failure to prevent a potential
NULL pointer dereference in dma_handle_rx(). Properly release DMA
channels and the PCI device reference using a goto ladder if the
allocation fails. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/ftrace: Relocate %rip-relative percpu refs in dynamic trampolines
With CONFIG_CALL_DEPTH_TRACKING enabled on an x86 retbleed-affected platform
(eg: Skylake), with retbleed=stuff, registering a dynamic ftrace trampoline
crashes on the first call into the traced function:
BUG: unable to handle page fault for address: ffff88817ae18880
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 4b53067 P4D 4b53067 PUD 0
Oops: Oops: 0002 [#1] SMP PTI
CPU: 3 UID: 0 PID: 187 Comm: usleep Not tainted 7.0.10 #243 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
Code: 24 78 00 00 00 00 48 89 ea 48 89 54 24 20 48 8b b4 24 b8 00 00 00 48 8b bc 24 b0 00 00 00 48 89 bc 24 80 00 00 00 48 83 ef 05 <65> 48 c1 3d 1f a8 b6 02 05 48 8b 15 f6 00 00 00 4c 89 3c 24 4c 89
Call Trace:
<TASK>
? find_held_lock
? exc_page_fault
? lock_release
? __x64_sys_clock_nanosleep
? lockdep_hardirqs_on_prepare
? trace_hardirqs_on
__x64_sys_clock_nanosleep
do_syscall_64
? exc_page_fault
? call_depth_return_thunk
entry_SYSCALL_64_after_hwframe
...
Kernel panic - not syncing: Fatal exception
This small reproducer allows to easily trigger the crash:
# echo 'p __x64_sys_clock_nanosleep' > /sys/kernel/tracing/kprobe_events
# echo 1 > /sys/kernel/tracing/events/kprobes/p___x64_sys_clock_nanosleep_0/enable
# usleep 1
Monitoring the crash under GDB points to the exact instruction in charge of
incrementing the call depth:
sarq $5, %gs:__x86_call_depth(%rip)
This instruction matches the one inserted by the ftrace_regs_caller from
ftrace_64.S. This emitted code was likely working fine until the introduction
of
59bec00ace28 ("x86/percpu: Introduce %rip-relative addressing to PER_CPU_VAR()"):
it has made the call depth accounting addressing relative to $rip, instead of
being based on an absolute address.
As this code exact location depends on where the trampoline lives in memory,
the corresponding displacement needs to be adjusted at runtime to actually
correctly find the per-cpu __x86_call_depth value, otherwise the targeted
address is wrong, leading to the page fault seen above.
Fix the %rip-relative displacement of the copied CALL_DEPTH_ACCOUNT
instruction (from ftrace_regs_caller) by calling text_poke_apply_relocation(),
as it is done for example by the x86 BPF JIT compiler through
x86_call_depth_emit_accounting(). This corrects both CALL_DEPTH_ACCOUNT slots,
in ftrace_caller and ftrace_regs_caller.
[ bp: Massage. ] |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: davinci: fix division by zero on missing clock-frequency
When the 'clock-frequency' property is missing from the device tree,
the driver falls back to DAVINCI_I2C_DEFAULT_BUS_FREQ. However, this
macro was defined in kHz (100), whereas the device tree property is
expected in Hz.
The probe function divided the fallback value by 1000, causing
integer truncation that resulted in dev->bus_freq = 0. This triggered
a deterministic division-by-zero kernel panic when calculating clock
dividers later in the probe sequence.
Fix this by redefining DAVINCI_I2C_DEFAULT_BUS_FREQ in Hz (100000)
to match the expected device tree property unit, allowing the existing
division logic to work correctly for both cases. |
| A flaw was found in libssh. A malicious username expanded through %r in ProxyCommand handling can inject shell metacharacters, exposing environment variables and causing unintended shell behavior. |
