| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
HID: logitech-dj: Fix maxfield check in DJ short report validation
Commit b6a57912854e ("HID: logitech-dj: Prevent REPORT_ID_DJ_SHORT
related user initiated OOB write") added validation for the DJ short
output report, but the error path dereferences rep->field[0] even when
rep->maxfield is zero.
Commit 8b9a097eb2fc ("HID: logitech-dj: fix wrong detection of bad
DJ_SHORT output report") made the check conditional on rep being present,
but a crafted descriptor can still create report ID 0x20 with only padding
output items. hid-core registers the report, ignores the padding field,
and leaves rep->maxfield as zero.
In that case the validation enters the rep->maxfield < 1 branch and then
dereferences rep->field[0]->report_count while printing the error message,
causing a NULL pointer dereference during probe. This is reproducible with
uhid by emulating a Logitech receiver with a padding-only DJ short output
report:
BUG: KASAN: null-ptr-deref in logi_dj_probe+0xb1/0x754 [hid_logitech_dj]
Read of size 4 at addr 0000000000000028 by task kworker/4:1/129
...
Call Trace:
logi_dj_probe+0xb1/0x754 [hid_logitech_dj]
hid_device_probe+0x329/0x3f0 [hid]
really_probe+0x162/0x570
__device_attach+0x137/0x2c0
bus_probe_device+0x38/0xc0
device_add+0xa56/0xce0
hid_add_device+0x19c/0x280 [hid]
uhid_device_add_worker+0x2c/0xb0 [uhid]
Reject the zero-field report before printing the field report_count. |
| In the Linux kernel, the following vulnerability has been resolved:
net/handshake: hand off the pinned file reference to accept_doit
handshake_req_next() removes the request from the per-net
pending list and drops hn_lock before handshake_nl_accept_doit()
reads req->hr_sk->sk_socket and dereferences sock->file (once in
FD_PREPARE() and again in get_file()). In that window a
consumer running tls_handshake_cancel() followed by sockfd_put()
(svc_sock_free) or __fput_sync() (xs_reset_transport) releases
sock->file. sock_release() then runs sock_orphan(), zeroing
sk_socket, and frees the struct socket. The accept-side code
either reads NULL through sk_socket or chases freed memory.
The submit-side sock_hold() does not prevent this. sk_refcnt
protects struct sock, but struct socket and sock->file are
independently refcounted via the file descriptor the consumer
owns. Pinning sk leaves sock and sock->file unprotected.
Retarget the accept-side dereferences at req->hr_file, which was
pinned at submit time, instead of req->hr_sk->sk_socket->file.
Pinning on its own is not sufficient: a consumer that cancels
between handshake_req_next() returning and accept_doit reaching
FD_PREPARE() takes the !remove_pending() branch in
handshake_req_cancel() and drops hr_file before the accept side
takes its own reference. Hand off an additional file reference
inside handshake_req_next(), under hn_lock, so the accept side
operates on a reference that no concurrent handshake_req_cancel()
can revoke. FD_PREPARE() consumes that handed-off reference,
either by transferring it to the new fd in fd_publish() or by
dropping it in the cleanup destructor on error; the explicit
get_file() that previously balanced FD_PREPARE() is therefore
redundant and goes away.
Update handshake_req_cancel_test2 and _test3 to simulate the
FD_PREPARE() consumption with an fput() so the kunit file-count
assertions stay balanced. |
| In the Linux kernel, the following vulnerability has been resolved:
net/handshake: Drain pending requests at net namespace exit
The arguments to list_splice_init() in handshake_net_exit() are
reversed. The call moves the local empty "requests" list onto
hn->hn_requests, leaving the local list empty, so the subsequent
drain loop runs zero iterations. Pending handshake requests that
had not yet been accepted are not torn down when the net namespace
is destroyed; each one keeps a reference on a socket file and on
the handshake_req allocation.
Pass the source and destination in the documented order
(list_splice_init(list, head) moves list onto head) so the pending
list is transferred to the local scratch list and drained through
handshake_complete().
Fixing the splice direction exposes a list-corruption race. After
the splice each req->hr_list still has non-empty link pointers,
threading the stack-local scratch list rather than hn_requests.
A concurrent handshake_req_cancel() -- for example, from sunrpc's
TLS timeout on a kernel socket whose netns reference was not
taken -- finds the request through the rhashtable, calls
remove_pending(), and sees !list_empty(&req->hr_list).
__remove_pending_locked() then list_del_init()s an entry off the
scratch list while the drain iterates, corrupting it. The same
call arriving after the drain loop has run list_del() on an
entry hits LIST_POISON instead.
Have remove_pending() check HANDSHAKE_F_NET_DRAINING under
hn_lock and report not-found when drain is in progress. The
drain has already taken ownership; handshake_complete()'s existing
test_and_set on HANDSHAKE_F_REQ_COMPLETED still arbitrates
between drain and cancel for who calls the consumer's hp_done. Use
list_del_init() rather than list_del() in the drain so req->hr_list
does not carry LIST_POISON after drain releases the entry.
The DRAINING guard in remove_pending() makes cancel return false,
but cancel still falls through to test_and_set_bit on
HANDSHAKE_F_REQ_COMPLETED and drops the request's hr_file reference.
Without another pin, if that is the last reference, sk_destruct frees
the request while it is still linked on the drain loop's local list.
Pin each request's hr_file under hn_lock before releasing the list,
and drop that drain pin after the loop finishes with the request. |
| In the Linux kernel, the following vulnerability has been resolved:
netconsole: avoid OOB reads, msg is not nul-terminated
msg passed to netconsole from the console subsystem is not guaranteed
to be nul-terminated. Before recent
commit 7eab73b18630 ("netconsole: convert to NBCON console infrastructure")
the message would be placed in printk_shared_pbufs, a static global
buffer, so KASAN had harder time catching OOB accesses. Now we see:
printk: console [netcon_ext0] enabled
BUG: KASAN: slab-out-of-bounds in string+0x1f7/0x240
Read of size 1 at addr ffff88813b6d4c00 by task pr/netcon_ext0/594
CPU: 65 UID: 0 PID: 594 Comm: pr/netcon_ext0 Not tainted 6.19.0-11754-g4246fd6547c9
Call Trace:
kasan_report+0xe4/0x120
string+0x1f7/0x240
vsnprintf+0x655/0xba0
scnprintf+0xba/0x120
netconsole_write+0x3fe/0xa10
nbcon_emit_next_record+0x46e/0x860
nbcon_kthread_func+0x623/0x750
Allocated by task 1:
nbcon_alloc+0x1ea/0x450
register_console+0x26b/0xe10
init_netconsole+0xbb0/0xda0
The buggy address belongs to the object at ffff88813b6d4000
which belongs to the cache kmalloc-4k of size 4096
The buggy address is located 0 bytes to the right of
allocated 3072-byte region [ffff88813b6d4000, ffff88813b6d4c00) |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: clone set on flush only
Syzbot with fault injection triggered a failing memory allocation with
GFP_KERNEL which results in a WARN splat:
iter.err
WARNING: net/netfilter/nf_tables_api.c:845 at nft_map_deactivate+0x34e/0x3c0 net/netfilter/nf_tables_api.c:845, CPU#0: syz.0.17/5992
Modules linked in:
CPU: 0 UID: 0 PID: 5992 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2026
RIP: 0010:nft_map_deactivate+0x34e/0x3c0 net/netfilter/nf_tables_api.c:845
Code: 8b 05 86 5a 4e 09 48 3b 84 24 a0 00 00 00 75 62 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc cc e8 63 6d fa f7 90 <0f> 0b 90 43
+80 7c 35 00 00 0f 85 23 fe ff ff e9 26 fe ff ff 89 d9
RSP: 0018:ffffc900045af780 EFLAGS: 00010293
RAX: ffffffff89ca45bd RBX: 00000000fffffff4 RCX: ffff888028111e40
RDX: 0000000000000000 RSI: 00000000fffffff4 RDI: 0000000000000000
RBP: ffffc900045af870 R08: 0000000000400dc0 R09: 00000000ffffffff
R10: dffffc0000000000 R11: fffffbfff1d141db R12: ffffc900045af7e0
R13: 1ffff920008b5f24 R14: dffffc0000000000 R15: ffffc900045af920
FS: 000055557a6a5500(0000) GS:ffff888125496000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fb5ea271fc0 CR3: 000000003269e000 CR4: 00000000003526f0
Call Trace:
<TASK>
__nft_release_table+0xceb/0x11f0 net/netfilter/nf_tables_api.c:12115
nft_rcv_nl_event+0xc25/0xdb0 net/netfilter/nf_tables_api.c:12187
notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85
blocking_notifier_call_chain+0x6a/0x90 kernel/notifier.c:380
netlink_release+0x123b/0x1ad0 net/netlink/af_netlink.c:761
__sock_release net/socket.c:662 [inline]
sock_close+0xc3/0x240 net/socket.c:1455
Restrict set clone to the flush set command in the preparation phase.
Add NFT_ITER_UPDATE_CLONE and use it for this purpose, update the rbtree
and pipapo backends to only clone the set when this iteration type is
used.
As for the existing NFT_ITER_UPDATE type, update the pipapo backend to
use the existing set clone if available, otherwise use the existing set
representation. After this update, there is no need to clone a set that
is being deleted, this includes bound anonymous set.
An alternative approach to NFT_ITER_UPDATE_CLONE is to add a .clone
interface and call it from the flush set path. |
| Improper Neutralization of Special Elements in Data Query Logic vulnerability in ash-project ash allows an attacker to forge a relationship to a record they cannot name, and to recover the secret value used to look it up.
When manage_relationship is used with on_lookup: :relate on a belongs_to relationship, the client-supplied lookup value is passed to Ash.Query.filter/2 without being cast to the attribute type. A nested map submitted where a scalar is expected is therefore interpreted as a filter predicate rather than a literal, so a lookup for a specific record becomes a query for any record matching a condition. The same path omits Ash.Query.limit(1), leaving Ash.read_one/2 able to distinguish no match from one match from several, which turns comparison predicates into an oracle for the lookup value. Authorization is unaffected; the destination read policy still applies.
This issue affects ash: from 1.52.0-rc.11 before 3.31.1. |
| A vulnerability was identified in Ichigo3766 image-gen-mcp 0.1.0. The impacted element is an unknown function of the file src/index.ts of the component upscale_images. Such manipulation of the argument output_path leads to path traversal. The attack must be carried out locally. The project was informed of the problem early through an issue report but has not responded yet. |
| Uncontrolled Resource Consumption vulnerability in ash-project ash allows an attacker to exhaust the memory of the node via a crafted keyset pagination cursor.
Read actions with keyset pagination deserialize the client-supplied page[:after] or page[:before] cursor in decode_values/2 in lib/ash/page/keyset.ex, which base64-decodes the value and passes it to :erlang.binary_to_term/2 without bounding its size. The Erlang external term format supports zlib-compressed payloads, which the decoder inflates transparently, so a cursor of a few kilobytes can allocate tens of megabytes of heap in a single call. Ash itself only ever encodes cursors uncompressed, so the decoder accepts a term shape its encoder never produces. Concurrent requests aggregate these allocations and can terminate the node.
This issue affects ash: from 1.17.0 before 3.31.1. |
| A vulnerability was determined in itsourcecode Hospital Management System 1.0. The affected element is an unknown function of the file /viewdoctorconsultancycharge.php. This manipulation of the argument delid causes sql injection. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized. |
| Perl versions through 5.45.1 have out-of-bounds heap reads and writes during regular expression matching via an undersized superlinear cache in S_regmatch.
The regex engine's superlinear cache holds one bit per subject position for each participating WHILEM node, so the bit count is the subject length plus one times the number of nodes. Nothing checks that product for positive overflow of the signed 32-bit count: a 286331153 byte subject matched against a pattern with 15 participating nodes stores the count as 14, leaving a two byte cache. The cache is then indexed from the real match position and node number, so reads go past the end of the allocation, and on failure CACHEsayNO sets a bit past it.
A caller that matches an attacker controlled subject of this size against a pattern of this shape can crash the process or corrupt heap memory. |
| A vulnerability has been found in lmammino oidc-authorizer 0.4.0. This issue affects the function parse_token_from_header of the file src/parse_token_from_header.rs of the component Authorization Header Parsing. The manipulation of the argument authorization_token leads to denial of service. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw has been found in macrozheng mall 0504e86. This vulnerability affects unknown code of the file /sso/getAuthCode of the component mall-portal Module. Executing a manipulation can lead to weak password recovery. The attack may be launched remotely. This attack is characterized by high complexity. It is stated that the exploitability is difficult. The exploit has been published and may be used. The vendor deleted the GitHub issue for this vulnerability without any explanation. Afterwards the vendor was contacted early about this disclosure via email but did not respond in any way. |
| A security vulnerability has been detected in nxp-auto-goldvip gvip up to 1.4.0. Affected by this issue is the function SitewiseCustomFunction of the component Lambda Function Handler. Such manipulation leads to improper access controls. The attack can be launched remotely. Upgrading to version 1.15.0 can resolve this issue. Upgrading the affected component is advised. The project explains: "The reported IAM permission configuration is a known historical issue that was already addressed in 2024, beginning with GoldVIP version 1.13.0. The permissions were updated in subsequent releases, including version 1.15.0. In addition, we also sent a request to either update or deprecate the older release in the AWS SAR application repository." |
| A weakness has been identified in 3CORESec Trapdoor up to 1.2.2. Affected by this vulnerability is the function DefaultFunction. This manipulation causes improper access controls. The attack can be initiated remotely. The vendor was contacted early about this disclosure. |
| A security flaw has been discovered in MingSoft MCMS up to 3.0.6. Affected is an unknown function of the file /mdiy/form/get of the component ms-mdiy. The manipulation results in information disclosure. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was identified in MingSoft MCMS up to 3.0.6. This impacts an unknown function of the file /mdiy/form/data/list of the component ms-mdiy. The manipulation leads to information disclosure. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in lock-upme OPMS up to 831440f37a92c1568f2e071d5233bc873a9d8b09. The impacted element is an unknown function of the file controllers/messages/message.go of the component IN Clause Handler. Performing a manipulation of the argument ids results in sql injection. The attack is possible to be carried out remotely. This product adopts a rolling release strategy to maintain continuous delivery. Therefore, version details for affected or updated releases cannot be specified. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been found in DedeCMS up to 5.7.118 UTF8SP2. The affected element is the function _4_Setup of the file install/index.php of the component Installation Wizard. Such manipulation leads to file inclusion. The attack can be executed remotely. This attack is characterized by high complexity. The exploitability is described as difficult. The exploit has been disclosed to the public and may be used. |
| A vulnerability was determined in Tenda CH22 1.0.0.1. This vulnerability affects the function formCertListInfo of the file /goform/CertListInfo. This manipulation of the argument Name causes command injection. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. |
| A vulnerability was determined in mifi lossless-cut up to 3.69.0. Affected by this issue is some unknown functionality of the file src/main/httpServer.ts of the component Built-in HTTP API Service. Executing a manipulation can lead to server-side request forgery. The attack requires access to the local network. This attack is characterized by high complexity. The exploitation is known to be difficult. The exploit has been publicly disclosed and may be utilized. This patch is called 260802348955231442c4bae6c2d9d8ede947af0a. It is best practice to apply a patch to resolve this issue. The project maintainer provides this view: "I'm not sure that this is a critical vulnerability, because it is behind an experimental CLI flag and the NTLM behavior isn't really a LosslessCut bug." The CVSS vector reflects the high level of pre-requisites. |
