| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: reject index allocation if $BITMAP is empty but blocks exist
Index allocation requires at least one bit in the $BITMAP attribute to
track usage of index entries. If the bitmap is empty while index blocks
are already present, this reflects on-disk corruption.
syzbot triggered this condition using a malformed NTFS image. During a
rename() operation involving a long filename (which spans multiple
index entries), the empty bitmap allowed the name to be added without
valid tracking. Subsequent deletion of the original entry failed with
-ENOENT, due to unexpected index state.
Reject such cases by verifying that the bitmap is not empty when index
blocks exist. |
| In the Linux kernel, the following vulnerability has been resolved:
smc: Fix use-after-free in __pnet_find_base_ndev().
syzbot reported use-after-free of net_device in __pnet_find_base_ndev(),
which was called during connect(). [0]
smc_pnet_find_ism_resource() fetches sk_dst_get(sk)->dev and passes
down to pnet_find_base_ndev(), where RTNL is held. Then, UAF happened
at __pnet_find_base_ndev() when the dev is first used.
This means dev had already been freed before acquiring RTNL in
pnet_find_base_ndev().
While dev is going away, dst->dev could be swapped with blackhole_netdev,
and the dev's refcnt by dst will be released.
We must hold dev's refcnt before calling smc_pnet_find_ism_resource().
Also, smc_pnet_find_roce_resource() has the same problem.
Let's use __sk_dst_get() and dst_dev_rcu() in the two functions.
[0]:
BUG: KASAN: use-after-free in __pnet_find_base_ndev+0x1b1/0x1c0 net/smc/smc_pnet.c:926
Read of size 1 at addr ffff888036bac33a by task syz.0.3632/18609
CPU: 1 UID: 0 PID: 18609 Comm: syz.0.3632 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xca/0x240 mm/kasan/report.c:482
kasan_report+0x118/0x150 mm/kasan/report.c:595
__pnet_find_base_ndev+0x1b1/0x1c0 net/smc/smc_pnet.c:926
pnet_find_base_ndev net/smc/smc_pnet.c:946 [inline]
smc_pnet_find_ism_by_pnetid net/smc/smc_pnet.c:1103 [inline]
smc_pnet_find_ism_resource+0xef/0x390 net/smc/smc_pnet.c:1154
smc_find_ism_device net/smc/af_smc.c:1030 [inline]
smc_find_proposal_devices net/smc/af_smc.c:1115 [inline]
__smc_connect+0x372/0x1890 net/smc/af_smc.c:1545
smc_connect+0x877/0xd90 net/smc/af_smc.c:1715
__sys_connect_file net/socket.c:2086 [inline]
__sys_connect+0x313/0x440 net/socket.c:2105
__do_sys_connect net/socket.c:2111 [inline]
__se_sys_connect net/socket.c:2108 [inline]
__x64_sys_connect+0x7a/0x90 net/socket.c:2108
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f47cbf8eba9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f47ccdb1038 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 00007f47cc1d5fa0 RCX: 00007f47cbf8eba9
RDX: 0000000000000010 RSI: 0000200000000280 RDI: 000000000000000b
RBP: 00007f47cc011e19 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f47cc1d6038 R14: 00007f47cc1d5fa0 R15: 00007ffc512f8aa8
</TASK>
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff888036bacd00 pfn:0x36bac
flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000000000 ffffea0001243d08 ffff8880b863fdc0 0000000000000000
raw: ffff888036bacd00 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as freed
page last allocated via order 2, migratetype Unmovable, gfp_mask 0x446dc0(GFP_KERNEL_ACCOUNT|__GFP_ZERO|__GFP_NOWARN|__GFP_RETRY_MAYFAIL|__GFP_COMP), pid 16741, tgid 16741 (syz-executor), ts 343313197788, free_ts 380670750466
set_page_owner include/linux/page_owner.h:32 [inline]
post_alloc_hook+0x240/0x2a0 mm/page_alloc.c:1851
prep_new_page mm/page_alloc.c:1859 [inline]
get_page_from_freelist+0x21e4/0x22c0 mm/page_alloc.c:3858
__alloc_frozen_pages_noprof+0x181/0x370 mm/page_alloc.c:5148
alloc_pages_mpol+0x232/0x4a0 mm/mempolicy.c:2416
___kmalloc_large_node+0x5f/0x1b0 mm/slub.c:4317
__kmalloc_large_node_noprof+0x18/0x90 mm/slub.c:4348
__do_kmalloc_node mm/slub.c:4364 [inline]
__kvmalloc_node
---truncated--- |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix race in do_task() when draining
When do_task() exhausts its iteration budget (!ret), it sets the state
to TASK_STATE_IDLE to reschedule, without a secondary check on the
current task->state. This can overwrite the TASK_STATE_DRAINING state
set by a concurrent call to rxe_cleanup_task() or rxe_disable_task().
While state changes are protected by a spinlock, both rxe_cleanup_task()
and rxe_disable_task() release the lock while waiting for the task to
finish draining in the while(!is_done(task)) loop. The race occurs if
do_task() hits its iteration limit and acquires the lock in this window.
The cleanup logic may then proceed while the task incorrectly
reschedules itself, leading to a potential use-after-free.
This bug was introduced during the migration from tasklets to workqueues,
where the special handling for the draining case was lost.
Fix this by restoring the original pre-migration behavior. If the state is
TASK_STATE_DRAINING when iterations are exhausted, set cont to 1 to
force a new loop iteration. This allows the task to finish its work, so
that a subsequent iteration can reach the switch statement and correctly
transition the state to TASK_STATE_DRAINED, stopping the task as intended. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Disallow dirty tracking if incoherent page walk
Dirty page tracking relies on the IOMMU atomically updating the dirty bit
in the paging-structure entry. For this operation to succeed, the paging-
structure memory must be coherent between the IOMMU and the CPU. In
another word, if the iommu page walk is incoherent, dirty page tracking
doesn't work.
The Intel VT-d specification, Section 3.10 "Snoop Behavior" states:
"Remapping hardware encountering the need to atomically update A/EA/D bits
in a paging-structure entry that is not snooped will result in a non-
recoverable fault."
To prevent an IOMMU from being incorrectly configured for dirty page
tracking when it is operating in an incoherent mode, mark SSADS as
supported only when both ecap_slads and ecap_smpwc are supported. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix UAF issue in f2fs_merge_page_bio()
As JY reported in bugzilla [1],
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
pc : [0xffffffe51d249484] f2fs_is_cp_guaranteed+0x70/0x98
lr : [0xffffffe51d24adbc] f2fs_merge_page_bio+0x520/0x6d4
CPU: 3 UID: 0 PID: 6790 Comm: kworker/u16:3 Tainted: P B W OE 6.12.30-android16-5-maybe-dirty-4k #1 5f7701c9cbf727d1eebe77c89bbbeb3371e895e5
Tainted: [P]=PROPRIETARY_MODULE, [B]=BAD_PAGE, [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Workqueue: writeback wb_workfn (flush-254:49)
Call trace:
f2fs_is_cp_guaranteed+0x70/0x98
f2fs_inplace_write_data+0x174/0x2f4
f2fs_do_write_data_page+0x214/0x81c
f2fs_write_single_data_page+0x28c/0x764
f2fs_write_data_pages+0x78c/0xce4
do_writepages+0xe8/0x2fc
__writeback_single_inode+0x4c/0x4b4
writeback_sb_inodes+0x314/0x540
__writeback_inodes_wb+0xa4/0xf4
wb_writeback+0x160/0x448
wb_workfn+0x2f0/0x5dc
process_scheduled_works+0x1c8/0x458
worker_thread+0x334/0x3f0
kthread+0x118/0x1ac
ret_from_fork+0x10/0x20
[1] https://bugzilla.kernel.org/show_bug.cgi?id=220575
The panic was caused by UAF issue w/ below race condition:
kworker
- writepages
- f2fs_write_cache_pages
- f2fs_write_single_data_page
- f2fs_do_write_data_page
- f2fs_inplace_write_data
- f2fs_merge_page_bio
- add_inu_page
: cache page #1 into bio & cache bio in
io->bio_list
- f2fs_write_single_data_page
- f2fs_do_write_data_page
- f2fs_inplace_write_data
- f2fs_merge_page_bio
- add_inu_page
: cache page #2 into bio which is linked
in io->bio_list
write
- f2fs_write_begin
: write page #1
- f2fs_folio_wait_writeback
- f2fs_submit_merged_ipu_write
- f2fs_submit_write_bio
: submit bio which inclues page #1 and #2
software IRQ
- f2fs_write_end_io
- fscrypt_free_bounce_page
: freed bounced page which belongs to page #2
- inc_page_count( , WB_DATA_TYPE(data_folio), false)
: data_folio points to fio->encrypted_page
the bounced page can be freed before
accessing it in f2fs_is_cp_guarantee()
It can reproduce w/ below testcase:
Run below script in shell #1:
for ((i=1;i>0;i++)) do xfs_io -f /mnt/f2fs/enc/file \
-c "pwrite 0 32k" -c "fdatasync"
Run below script in shell #2:
for ((i=1;i>0;i++)) do xfs_io -f /mnt/f2fs/enc/file \
-c "pwrite 0 32k" -c "fdatasync"
So, in f2fs_merge_page_bio(), let's avoid using fio->encrypted_page after
commit page into internal ipu cache. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dlink: handle copy_thresh allocation failure
The driver did not handle failure of `netdev_alloc_skb_ip_align()`.
If the allocation failed, dereferencing `skb->protocol` could lead to
a NULL pointer dereference.
This patch tries to allocate `skb`. If the allocation fails, it falls
back to the normal path.
Tested-on: D-Link DGE-550T Rev-A3 |
| In the Linux kernel, the following vulnerability has been resolved:
vhost: vringh: Modify the return value check
The return value of copy_from_iter and copy_to_iter can't be negative,
check whether the copied lengths are equal. |
| The Tutor LMS WordPress plugin before 4.0.0 does not properly verify that a user has access to the course a Q&A thread belongs to before returning or writing to that thread, allowing authenticated users with subscriber-level access and above who can access any single course to read the Q&A threads of other courses and to inject replies into them. |
| In the Linux kernel, the following vulnerability has been resolved:
uio_hv_generic: Let userspace take care of interrupt mask
Remove the logic to set interrupt mask by default in uio_hv_generic
driver as the interrupt mask value is supposed to be controlled
completely by the user space. If the mask bit gets changed
by the driver, concurrently with user mode operating on the ring,
the mask bit may be set when it is supposed to be clear, and the
user-mode driver will miss an interrupt which will cause a hang.
For eg- when the driver sets inbound ring buffer interrupt mask to 1,
the host does not interrupt the guest on the UIO VMBus channel.
However, setting the mask does not prevent the host from putting a
message in the inbound ring buffer. So let’s assume that happens,
the host puts a message into the ring buffer but does not interrupt.
Subsequently, the user space code in the guest sets the inbound ring
buffer interrupt mask to 0, saying “Hey, I’m ready for interrupts”.
User space code then calls pread() to wait for an interrupt.
Then one of two things happens:
* The host never sends another message. So the pread() waits forever.
* The host does send another message. But because there’s already a
message in the ring buffer, it doesn’t generate an interrupt.
This is the correct behavior, because the host should only send an
interrupt when the inbound ring buffer transitions from empty to
not-empty. Adding an additional message to a ring buffer that is not
empty is not supposed to generate an interrupt on the guest.
Since the guest is waiting in pread() and not removing messages from
the ring buffer, the pread() waits forever.
This could be easily reproduced in hv_fcopy_uio_daemon if we delay
setting interrupt mask to 0.
Similarly if hv_uio_channel_cb() sets the interrupt_mask to 1,
there’s a race condition. Once user space empties the inbound ring
buffer, but before user space sets interrupt_mask to 0, the host could
put another message in the ring buffer but it wouldn’t interrupt.
Then the next pread() would hang.
Fix these by removing all instances where interrupt_mask is changed,
while keeping the one in set_event() unchanged to enable userspace
control the interrupt mask by writing 0/1 to /dev/uioX. |
| The tourmaster WordPress plugin before 5.4.8 does not perform a nonce check when storing a custom-filter label taken from a request parameter, and does not escape that label when echoing it on the filter admin page, allowing an unauthenticated attacker to trick a logged-in administrator into storing JavaScript that then executes in the admin area (stored Cross-Site Scripting via CSRF). |
| The Essential Addons for Elementor WordPress plugin before 6.6.10 does not perform authorization, status, or visibility checks when resolving WooCommerce products in its product-comparison feature, allowing unauthenticated users to disclose the title, price, and SKU of draft, pending, and private products that are otherwise withheld from public view. |
| The Essential Addons for Elementor WordPress plugin before 6.6.10 does not validate the HTML tag name of the Pricing Table widget title before outputting it, allowing users with Contributor-level access and above to inject JavaScript that will be executed (Stored Cross-Site Scripting) when the page is viewed, including in the session of an administrator previewing or visiting the post. |
| The Animation Addons for Elementor WordPress plugin before 2.7.0 does not sanitise uploaded SVG/SVGZ files, which it adds to the list of allowed upload types, allowing users with the upload_files capability (Author and above) to upload files containing malicious JavaScript, leading to Stored Cross-Site Scripting. |
| The Eventin WordPress plugin before 4.1.16 does not properly authorize order creation and accepts an attacker-supplied order status, allowing unauthenticated users to create orders marked as paid without completing any payment. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/waitid: always prune wait queue entry in io_waitid_wait()
For a successful return, always remove our entry from the wait queue
entry list. Previously this was skipped if a cancelation was in
progress, but this can race with another invocation of the wait queue
entry callback. |
| The WP Travel Engine WordPress plugin before 6.8.2 does not perform a capability check on an AJAX action that updates a WP Travel Engine WordPress plugin before 6.8.2 option, allowing unauthenticated users to overwrite a site-wide WP Travel Engine WordPress plugin before 6.8.2 option (the public nonce that gates the action is served to anonymous visitors). |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/zcrx: fix overshooting recv limit
It's reported that sometimes a zcrx request can receive more than was
requested. It's caused by io_zcrx_recv_skb() adjusting desc->count for
all received buffers including frag lists, but then doing recursive
calls to process frag list skbs, which leads to desc->count double
accounting and underflow. |
| The WP Ghost (Hide My WP Ghost) WordPress plugin before 7.0.05 does not verify that client IP information comes from a trusted proxy before trusting attacker-controllable HTTP headers, allowing unauthenticated attackers to spoof their IP address to bypass the WP Ghost (Hide My WP Ghost) WordPress plugin before 7.0.05's own brute-force protection and to downgrade its firewall by matching a hardcoded whitelisted IP range. |
| The Frontend Admin by DynamiApps WordPress plugin before 3.29.7 does not perform capability checks on its taxonomy term creation, modification, and deletion operations, allowing authenticated users with low privileges (such as Subscribers) to create, rename, and delete arbitrary taxonomy terms. |
