| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_log: initialize nfgenmsg in NLMSG_DONE terminator
When batching multiple NFLOG messages (inst->qlen > 1), __nfulnl_send()
appends an NLMSG_DONE terminator with sizeof(struct nfgenmsg) payload via
nlmsg_put(), but never initializes the nfgenmsg bytes. The nlmsg_put()
helper only zeroes alignment padding after the payload, not the payload
itself, so four bytes of stale kernel heap data are leaked to userspace
in the NLMSG_DONE message body.
Use nfnl_msg_put() to build the NLMSG_DONE terminator, which initializes
the nfgenmsg payload via nfnl_fill_hdr(), consistent with how
__build_packet_message() already constructs NFULNL_MSG_PACKET headers. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: prevent opcode speculation
sqe->opcode is used for different tables, make sure we santitise it
against speculations. |
| In MiracastService, there is a possible escalation of privilege due to a confused deputy. This could lead to local denial of service with User execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS11060069 / DTV04881615; Issue ID: MSV-7882. |
| Tobit Laboratories AG TeamDavid's Webbox 's move archive functionality (“!ArcEntryMove”) accepts
an arbitrary path, which can be set to network locations using UNC paths
(e.g., “\\Server\Share”). The server processes these paths without
validation, resulting in outbound connection attempts to
attacker-controlled SMB servers. This enables au-thenticated attackers
to trigger the server to authenticate to arbitrary SMB endpoints,
potentially exposing NTLM authentication information (such as NTLM
hashes). If outbound connections to port 445 (SMB) are permitted,
attackers can use this to conduct SMB relay or credential theft attacks.
Exploitation of the “pathname” parameter is possible without
authentication. This issue affects TeamDavid before Rollout 528.
Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality. |
| Tobit Laboratories AG TeamDavid's Webbox 's sending email, fax, SMS, etc. functionality accepts a
@@INCLUDE command, which can be set to network locations using UNC paths
(e.g., “\\Server\Share”). The server processes these paths without
validation, resulting in outbound connection attempts to
attacker-controlled SMB servers. This enables authenticated attackers to
trigger the server to authenticate to arbitrary SMB endpoints,
potentially exposing NTLM authentication information (such as NTLM
hashes). If outbound connections to port 445 (SMB) are permitted,
attackers can use this to conduct SMB relay or credential theft attacks.
Exploitation of the “pathname” parameter is possible without
authentication. This issue affects TeamDavid before Rollout 528.
Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality. |
| Tobit Laboratories AG TeamDavid's Webbox 's link storing functionality (//ServerClient_celink.htm)
accepts a “pathname” parameter, which can be set to network locations
using UNC paths (e.g., “\\Server\Share”). The server processes these
paths without validation, resulting in outbound connection attempts to
attacker-controlled SMB servers. This enables authenticated attackers to
trigger the server to authenticate to arbitrary SMB endpoints,
potentially exposing NTLM authentication information (such as NTLM
hashes). If outbound connections to port 445 (SMB) are permitted,
attackers can use this to conduct SMB relay or credential theft attacks.
Exploitation of the “pathname” parameter is possible without
authentication. This issue affects TeamDavid before Rollout 528.
Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality. |
| Tobit Laboratories AG TeamDavid's Webbox 's search functionality accepts a “pathnameroot”
parameter, which can be set to network locations using UNC paths (e.g.,
“\\Server\Share”). The server processes these paths without validation,
resulting in outbound connection attempts to attacker-controlled SMB
servers. This enables unauthenticated attackers to trigger the server to
authenticate to arbitrary SMB endpoints, potentially exposing NTLM
authentication information (such as NTLM hashes). If outbound
connections to port 445 (SMB) are permitted, attackers can use this to
conduct SMB relay or credential theft attacks. Exploitation of the
“pathnameroot” parameter is possible without authentication.This issue affects TeamDavid before Rollout 528.
Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality. |
| The Hummingbird – Speed Optimization, Caching, Minify, Compress & CDN plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 3.21.0 via the log_msg() function in core/modules/class-page-cache.php. The page-cache debug log is written to wp-content/wphb-logs/page-caching-log.php, a directly web-accessible PHP file that is supposed to be protected by a leading '<?php die(); ?>' header. That header is guarded by class_exists( 'Filesystem' ), which can never match because class_exists() resolves string arguments in the global namespace while the class is Hummingbird\Core\Filesystem; when the log is created during a front-end request the header is therefore omitted entirely. get_cookies() then writes the raw name of any cookie matching the wphb_cache_ prefix into that file without sanitization. This makes it possible for unauthenticated attackers to write arbitrary PHP into the log file with a single anonymous request and execute it by requesting the file directly, resulting in full remote code execution. Exploitation requires the site administrator to have enabled Page Caching with the Debug Log option (non-default), and the log file to be created during a front-end request — a state reached by the plugin's own 'Clear logs' action, any cache flush, or unattended via the plugin's daily log-rotation cron, which can strip the protective header from an existing log file. |
| Improper neutralization of CRLF sequences in IXON VPN Client before version 1.4.7 allows an attacker to execute commands as root or SYSTEM. Configuration values accepted by the local service are written to a file later consumed by a privileged subprocess, without line-ending sequences being neutralized, which allows additional directives to be introduced into that file. The configuration interface accepts changes without authenticating or verifying the origin of the requester. The injected configuration persists on disk across restarts of the client and the operating system, and the VPN connection continues to function normally, so there is no behavioral change visible to the user. |
| The Divi theme for WordPress is vulnerable to Server-Side Request Forgery in all versions up to, and including, 4.27.6. This is due to the `et_pb_set_video_oembed_thumbnail_resolution()` function using `wp_remote_get()` instead of `wp_safe_remote_get()` to fetch a remote image URL, which does not restrict requests to private or reserved IP ranges. This makes it possible for authenticated attackers, with Contributor-level access and above, to make web requests to arbitrary locations originating from the web application server. The response body is not returned to the attacker (blind SSRF), but two oracles exist: a status oracle (the returned URL string differs depending on whether the target responded with HTTP 200) and a timing oracle (response time varies by target reachability). |
| The Divi Ajax Filter plugin for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 5.1.2 via the 'custom_loop_template' parameter parameter. This makes it possible for unauthenticated attackers to include and execute arbitrary .php files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where .php file types can be uploaded and included. This vulnerability is only exploitable when the loop_templates parameter is set to 'custom-template'. |
| The Post Grid and Gutenberg Blocks – ComboBlocks plugin for WordPress is vulnerable to Unauthenticated Hook Injection in versions 2.2.32 to 2.3.1 via several functions in the ~/includes/blocks/form-wrap/function.php file. This makes it possible for unauthenticated attackers to execute actions with hooks in WordPress, granted no other security controls are present in the function. |
| In DocsGPT 0.15.0 and below, the application provides a custom prompt feature that allows users to define prompt content used during chatbot interactions. This functionality renders user-supplied prompt data using Jinja templates without input sanitization or sandboxing. An unauthenticated attacker can inject malicious template expressions, leading to a server-side template injection (SSTI) vulnerability that can be exploited to achieve full remote code execution (RCE). |
| Douyin_TikTok_Download_API through 4.1.2 contains a server-side request forgery vulnerability in the /api/download and /api/hybrid/video_data endpoints that allows unauthenticated attackers to fetch arbitrary URLs by supplying a url query parameter. Attackers can request internal services including cloud metadata endpoints and retrieve response bodies containing sensitive credentials through error messages. |
| SQL Chat contains four unauthenticated API endpoints that accept client-supplied database connection parameters and execute arbitrary SQL queries against attacker-specified hosts. Attackers can connect to internal databases, execute SQL commands, enumerate schemas, and pivot into the server's network without authentication. |
| The Greenshift WordPress plugin before 13.2.0 does not validate a user-supplied URL before fetching it server-side, allowing users with contributor-level access and above to make the server issue requests to arbitrary hosts and read the response. |
| A vulnerability was identified in itsourcecode Online Medicine Delivery System 1.0. Impacted is an unknown function of the file /index.php?q=orderdetails. Such manipulation of the argument location leads to cross site scripting. The attack may be launched remotely. The exploit is publicly available and might be used. |
| toml-node is a TOML parser for Node.js and the browser. Prior to 4.1.2, toml.parse() in lib/compiler.js can be tricked by a table path such as a.b.y.__proto__.__proto__, allowing traversal from a scalar value into Number.prototype and Object.prototype. The currentPath tracking value uses both arrays and strings, so valueAssignments records a comma-joined path such as a,b.y while deepRef checks the dot-joined path a.b.y, allowing the duplicate-key guard to miss and attacker-controlled keys to be written to Object.prototype. A table-array prefix-clearing path in addTableArray can also erase guard state before the same __proto__ traversal. Injected properties become visible throughout the Node.js process and can cause denial of service, logic or authorization bypass, or code execution when an application contains a suitable gadget. This issue is fixed in version 4.1.2. |
| Server-Side Request Forgery (SSRF) vulnerability in SEOPress allows Server Side Request Forgery.
This issue affects SEOPress: from n/a through 10.1. |
| Label Studio through 1.23.0 fails to validate webhook URLs, allowing authenticated users to dispatch requests to internal services including RFC 1918 addresses and cloud metadata endpoints. Attackers can create webhooks targeting private networks and exfiltrate annotation data by enabling payload transmission in outbound requests. |
