| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An always-incorrect control flow implementation in the implicit filter terms of Juniper Networks Junos OS and Junos OS Evolved on ACX5800, EX9200 Series, MX10000 Series, MX240, MX480, MX960 devices with affected Trio line cards allows an attacker to exploit an interdependency in the PFE UCODE microcode of the Trio chipset with various line cards to cause packets destined to the devices interfaces to cause a Denial of Service (DoS) condition by looping the packet with an unreachable exit condition ('Infinite Loop'). To break this loop once it begins one side of the affected LT interfaces will need to be disabled. Once disabled, the condition will clear and the disabled LT interface can be reenabled. Continued receipt and processing of these packets will create a sustained Denial of Service (DoS) condition. This issue only affects LT-LT interfaces. Any other interfaces are not affected by this issue. This issue affects the following cards: MPCE Type 3 3D MPC4E 3D 32XGE MPC4E 3D 2CGE+8XGE EX9200 32x10G SFP EX9200-2C-8XS FPC Type 5-3D FPC Type 5-LSR EX9200 4x40G QSFP An Indicator of Compromise (IoC) can be seen by examining the traffic of the LT-LT interfaces for excessive traffic using the following command: monitor interface traffic Before loop impact: Interface: lt-2/0/0, Enabled, Link is Up Encapsulation: Logical-tunnel, Speed: 100000mbps Traffic statistics: Current delta Input bytes: 3759900268942 (1456 bps) [0] <---------- LT interface utilization is low Output bytes: 3759900344309 (1456 bps) [0] <---------- LT interface utilization is low After loop impact: Interface: lt-2/0/0, Enabled, Link is Up Encapsulation: Logical-tunnel, Speed: 100000mbps Traffic statistics: Current delta Input bytes: 3765160313129 (2158268368 bps) [5260044187] <---------- LT interface utilization is very high Output bytes: 3765160399522 (2158266440 bps) [5260055213] <---------- LT interface utilization is very high This issue affects: Juniper Networks Junos OS on ACX5800, EX9200 Series, MX10000 Series, MX240, MX480, MX960. Versions 15.1F6, 16.1R1, and later versions prior to 16.1R7-S8; 17.1 versions prior to 17.1R2-S12; 17.2 versions prior to 17.2R3-S4; 17.3 versions prior to 17.3R3-S8; 17.4 versions prior to 17.4R2-S10, 17.4R3-S2; 18.1 versions prior to 18.1R3-S10; 18.2 versions prior to 18.2R2-S7, 18.2R3-S3; 18.3 versions prior to 18.3R1-S7, 18.3R3-S2; 18.4 versions prior to 18.4R1-S7, 18.4R2-S4, 18.4R3-S2; 19.1 versions prior to 19.1R1-S5, 19.1R2-S1, 19.1R3; 19.2 versions prior to 19.2R1-S4, 19.2R2; 19.3 versions prior to 19.3R2-S3, 19.3R3; 19.4 versions prior to 19.4R1-S1, 19.4R2. This issue does not affect the MX10001. This issue does not affect Juniper Networks Junos OS versions prior to 15.1F6, 16.1R1. Juniper Networks Junos OS Evolved on ACX5800, EX9200 Series, MX10000 Series, MX240, MX480, MX960 19.4 versions prior to 19.4R2-EVO. This issue does not affect the MX10001. |
| Due to an improper Initialization vulnerability on Juniper Networks Junos OS QFX5100-96S devices with QFX 5e Series image installed, ddos-protection configuration changes will not take effect beyond the default DDoS (Distributed Denial of Service) settings when configured from the CLI. The DDoS protection (jddosd) daemon allows the device to continue to function while protecting the packet forwarding engine (PFE) during the DDoS attack. When this issue occurs, the default DDoS settings within the PFE apply, as CPU bound packets will be throttled and dropped in the PFE when the limits are exceeded. To check if the device has this issue, the administrator can execute the following command to monitor the status of DDoS protection: user@device> show ddos-protection protocols error: the ddos-protection subsystem is not running This issue affects only QFX5100-96S devices. No other products or platforms are affected by this issue. This issue affects: Juniper Networks Junos OS on QFX5100-96S: 17.3 versions prior to 17.3R3-S10; 17.4 versions prior to 17.4R3-S4; 18.1 versions prior to 18.1R3-S10; 18.2 versions prior to 18.2R3-S3; 18.3 versions prior to 18.3R3-S2; 18.4 versions prior to 18.4R2-S4, 18.4R3-S1; 19.1 versions prior to 19.1R3, 19.1R3-S4; 19.2 versions prior to 19.2R2; 19.3 versions prior to 19.3R3; 19.4 versions prior to 19.4R2; |
| On Juniper Networks Junos OS Evolved devices, receipt of a specific IPv6 packet may cause an established IPv6 BGP session to terminate, creating a Denial of Service (DoS) condition. Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. This issue does not affect IPv4 BGP sessions. This issue affects IBGP or EBGP peer sessions with IPv6. This issue affects: Juniper Networks Junos OS Evolved: 19.4 versions prior to 19.4R2-S3-EVO; 20.1 versions prior to 20.1R2-S3-EVO; 20.2 versions prior to 20.2R2-S1-EVO; 20.3 versions prior to 20.3R2-EVO. This issue does not affect Juniper Networks Junos OS releases. |
| Improper initialization in the installer for some Intel(R) Graphics DCH Drivers for Windows 10 before version 27.20.100.9316 may allow an authenticated user to potentially enable denial of service via local access. |
| Improper initialization in the firmware for some Intel(R) Processors may allow a privileged user to potentially enable a denial of service via local access. |
| Improper initialization in some Intel(R) Graphics Driver before version 27.20.100.9030 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| Improper initialization in firmware for some Intel(R) PROSet/Wireless WiFi and Killer(TM) WiFi in Windows 10 may allow an authenticated user to potentially enable information disclosure via adjacent access. |
| An issue existed in the parsing of URLs. This issue was addressed with improved input validation. This issue is fixed in macOS Server 5.11. Processing a maliciously crafted URL may lead to an open redirect or cross site scripting. |
| A memory initialization issue was addressed with improved memory handling. This issue is fixed in iOS 14.0 and iPadOS 14.0. A local user may be able to read kernel memory. |
| A lock screen issue allowed access to messages on a locked device. This issue was addressed with improved state management. This issue is fixed in iOS 14.0 and iPadOS 14.0. A person with physical access to an iOS device may be able to view notification contents from the lockscreen. |
| This issue was addressed with improved checks. This issue is fixed in iOS 14.0 and iPadOS 14.0, watchOS 7.0. The screen lock may not engage after the specified time period. |
| A memory initialization issue was addressed with improved memory handling. This issue is fixed in iOS 13.6 and iPadOS 13.6, macOS Catalina 10.15.6, tvOS 13.4.8, watchOS 6.2.8. An application may be able to execute arbitrary code with kernel privileges. |
| A stack overflow issue existed in Swift for Linux. The issue was addressed with improved input validation for dealing with deeply nested malicious JSON input. |
| A memory initialization issue was addressed with improved memory handling. This issue is fixed in macOS Catalina 10.15.5. A local user may be able to read kernel memory. |
| An issue existed in the handling of tabs displaying picture in picture video. The issue was corrected with improved state handling. This issue is fixed in iOS 13.4 and iPadOS 13.4. A user's private browsing activity may be unexpectedly saved in Screen Time. |
| Naver Cloud Explorer before 2.2.2.11 allows the attacker can move a local file in any path on the filesystem as a system privilege through its named pipe. |
| If NiFi Registry 0.1.0 to 0.5.0 uses an authentication mechanism other than PKI, when the user clicks Log Out, NiFi Registry invalidates the authentication token on the client side but not on the server side. This permits the user's client-side token to be used for up to 12 hours after logging out to make API requests to NiFi Registry. |
| The Community plugin 2.9.e-beta for Piwigo allows users to set image information on images in albums for which they do not have permission, by manipulating the image_id parameter. |
| An issue was discovered in includes/head.inc.php in rConfig before 3.9.4. An unauthenticated attacker can retrieve saved cleartext credentials via a GET request to settings.php. Because the application was not exiting after a redirect is applied, the rest of the page still executed, resulting in the disclosure of cleartext credentials in the response. |
| An Insecure Direct Object Reference (IDOR) vulnerability in the Change Password feature of Subex ROC Partner Settlement 10.5 allows remote authenticated users to achieve account takeover via manipulation of POST parameters. NOTE: This vulnerability may only affect a testing version of the application |
