| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A buffer overflow vulnerability in the PAPI protocol of AOS-8 could allow an authenticated remote attacker with high privileges to achieve remote code execution. Successful exploitation could allow an attacker to execute arbitrary code as a privileged user on the underlying operating system. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: sr: use skb_get_hash_net() in seg6_make_flowlabel()
Since commit d58e468b1112 ("flow_dissector: implements flow dissector
BPF hook") __skb_flow_dissect() needs a net pointer, either from
skb->dev, skb->sk, or since commit 3cbf4ffba5ee ("net: plumb network
namespace into __skb_flow_dissect") a caller provided pointer.
syzbot was able to reach seg6_make_flowlabel() with an skb having
neither skb->dev nor skb->sk set: a TIPC UDP bearer sends a discovery
message through an IPv4 route using seg6 encap, while
net.ipv6.seg6_flowlabel is set to 1.
seg6_make_flowlabel() already has a net pointer, use skb_get_hash_net().
WARNING: net/core/flow_dissector.c:1131 at __skb_flow_dissect+0x910/0x5368 net/core/flow_dissector.c:1126, CPU#0: syz.0.17/4930
Call trace:
__skb_flow_dissect+0x910/0x5368 net/core/flow_dissector.c:1126 (P)
__skb_get_hash_net+0xe0/0x29c net/core/flow_dissector.c:1903
skb_get_hash include/linux/skbuff.h:1663 [inline]
seg6_make_flowlabel+0xcc/0x1ec net/ipv6/seg6_iptunnel.c:132
__seg6_do_srh_encap+0x320/0xbf4 net/ipv6/seg6_iptunnel.c:161
seg6_do_srh+0x4b4/0xa44 net/ipv6/seg6_iptunnel.c:431
seg6_output_core+0x164/0x688 net/ipv6/seg6_iptunnel.c:681
seg6_output+0x44/0x1ac net/ipv6/seg6_iptunnel.c:744
lwtunnel_output+0x3d0/0x664 net/core/lwtunnel.c:356
dst_output include/net/dst.h:470 [inline]
ip_local_out+0x110/0x148 net/ipv4/ip_output.c:131
iptunnel_xmit+0x50c/0xd38 net/ipv4/ip_tunnel_core.c:97
udp_tunnel_xmit_skb+0x220/0x348 net/ipv4/udp_tunnel_core.c:187
tipc_udp_xmit+0x75c/0x9c0 net/tipc/udp_media.c:202
tipc_udp_send_msg+0x214/0x374 net/tipc/udp_media.c:274
tipc_bearer_xmit_skb+0x260/0x3b0 net/tipc/bearer.c:576
tipc_enable_bearer net/tipc/bearer.c:366 [inline]
__tipc_nl_bearer_enable+0xc90/0xfb0 net/tipc/bearer.c:1048
tipc_nl_bearer_enable+0x2c/0x48 net/tipc/bearer.c:1057
genl_family_rcv_msg_doit+0x1e4/0x2d4 net/netlink/genetlink.c:1114 |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: qcom: lpass-cpu: use DAI table index for playback constraints
The DAI ID is a hardware port ID and is not necessarily the index of
the corresponding entry in variant->dai_driver.
When configuring a DAI with LPAIF_I2SCTL_MODE_QUAD01, the probe code
currently uses dai_id to index variant->dai_driver. This is incorrect
for platforms where DAI IDs are sparse. For example, the IPQ806x MI2S
DAI has ID 4 while it is the only entry in the DAI driver table. If
that DAI is configured for QUAD01 and probe reaches this branch, the
code writes beyond that single entry via dai_driver[4] instead of
updating the DAI being processed.
Use the loop index i when updating the current DAI's playback channel
constraints, while retaining dai_id for indexing the hardware-port
specific playback SD-line mode array.
This fixes the incorrect DAI table access for platforms where the DAI
ID does not match its position in the driver table. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: handle mount locking for automounts correctly
If mounts are propagated across user namespaces, attach_recursive_mnt()
locks every copy of the source mount to protect overmounts from
vanishing and revealing the underlying files or directories.
The user namespace is taken from the caller's mount namespaces since
this is where the mounts end up. Except, that's not always true.
Automounts may legitimately get popped in by tasks located in a
different mount and user namespace during path lookup.
Then check doesn't make sense at that point. The copy in the namespace
of the parent - which may be the host's - is now locked and the host
cannot change the flags of its own mounts anymore.
Here's the reproducer:
- host has debugfs mounted nosuid,nodev,noexec and shared
- tracefs automount below it is not yet active
- hand a child process a directory descriptor on that mount
- child process enters auser and mount namespace
- child process' namespace now holds a locked copy of the host's debugfs
mount that receives propagation from it
- child process stats "tracing/." through the descriptor
- lookup runs on the host's mount so the automount lands below the host's mount
- propagation puts a copy below the child's copy
- both try to clear the flags on the mount they got, with a bind remount:
host, on its own automount: MS_REMOUNT|MS_BIND = EPERM
child, on the copy in its namespace: MS_REMOUNT|MS_BIND = 0
So the lock landed on the host's mount instead of the child's copy.
Congrats. So we need to compare with the owner of the namespace the
mount actually gets mounted on. For all regular cases that is the
caller's mount namespace and so nothing changes.
Detached trees in anonymous mount namespaces by be handed over via
SCM_RIGHTS or inherited in other ways on purpose so the attaching task's
mount namespace is authoritative, not the creator of the detached tree. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: refuse an automount below a mount that is in no namespace
It's possible to add autmounts even when the parent mount isn't in the
mount namespace of the caller. The only requirement we have is that the
parent mount namespace must not be NULL, i.e., unmounted.
Problem is that clone_private_mount() has MNT_NS_INTERNAL which makes
that trivially true. So that passes the test and attach_recursive_mnt()
accepts that as a mount point and funny enough, count_mounts()
dereferences MNT_NS_INTERNAL. The problem is it is an error pointer...
So we can reach this in userspace via fanotify. A filesystem mark on the
lower filesystem of an overlay reports paths on the layer clone and
reading the event hands out a descriptor on it. For example with debugfs
as the lower layer it goes kaboom:
openat(evfd, "tracing", O_DIRECTORY)
Oops: general protection fault
KASAN: null-ptr-deref in range [0x1d0-0x1d7]
RIP: 0010:count_mounts+0x35/0x200
attach_recursive_mnt
finish_automount
And since that sleeping beauty happens under namespace_sem held for
writing every mount operation on the system blocks from then on.
Congrats.
Use is_mounted() instead which rejects unmounted and internal mounts
alike. The open fails with EINVAL just as it did before
clone_private_mount() used MNT_NS_INTERNAL. |
| In the Linux kernel, the following vulnerability has been resolved:
unshare: don't drop active namespace references that were never taken
Active references on the namespaces of an nsproxy are taken when the
nsproxy is installed into a task in switch_task_namespaces() and
copy_namespaces() and dropped again by put_nsproxy() through
deactivate_nsproxy().
But ksys_unshare() calls put_nsproxy() on an nsproxy that was never
installed when set_cred_ucounts() fails. The new namespaces of that
nsproxy go from zero to minus one and the namespaces shared with the
caller lose a reference that belongs to the nsproxy the caller keeps
using:
WARNING: kernel/nscommon.c:171 at __ns_ref_active_put+0x1cd/0x230
nsproxy_ns_active_put
deactivate_nsproxy
ksys_unshare
Afterwards the namespaces the caller lives in aren't listed by listns()
anymore. set_cred_ucounts() only fails when alloc_ucounts() can't
allocate and it only allocates when the real uid of the caller differs
from its effective uid.
Commit cefd55bd2159 ("nsproxy: fix free_nsproxy() and simplify
create_new_namespaces()") separated the two cases on purpose.
nsproxy_free() frees an nsproxy that was prepared but never installed
and that's what a failed setns() uses in put_nsset(). Export it and use
it for a failed unshare() as well. |
| LangGraph checkpoint savers provide Postgres- and SQLite-backed state persistence for LangGraph workflows and agents. Prior to langgraph-checkpoint-postgres 3.1.3 and langgraph-checkpoint-sqlite 3.1.2, PostgresStore, AsyncPostgresStore, SqliteStore, and AsyncSqliteStore flatten namespace labels with ".".join(namespace), while BaseStore validates labels only for put and aput. Unvalidated dotted labels passed through get, search, delete, list_namespaces, their asynchronous equivalents, or direct batch and abatch operations can resolve to another tenant's stored namespace, allowing cross-namespace reads, overwrites, or deletion. InMemoryStore is not affected because it compares namespace tuples. This issue is fixed in langgraph-checkpoint-postgres 3.1.3 and langgraph-checkpoint-sqlite 3.1.2. |
| IBM MQ could allow an authenticated attacker to cause a denial of service by sending specially crafted multicast status messages that trigger a NULL pointer dereference. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| IBM MQ Operator could allow an authenticated attacker to cause a denial of service or potentially execute arbitrary code due to unrestricted Java deserialization in the MQ Classes for Java. |
| IBM MQ could allow an authenticated attacker to cause a limited denial of service and obtain very limited information about process memory layout due to an out-of-bounds read when processing a specially crafted client request. |
| An authentication bypass vulnerability in the SSH daemon of AOS-8 allows an unauthenticated remote attacker to circumvent existing authentication controls. Successful exploitation allows an attacker to gain administrative privileges leading to complete compromise of the AOS-8 host. |
| A buffer overflow vulnerability exists in the PAPI protocol of AOS-8 that could allow an unauthenticated remote attacker to circumvent existing authentication controls. Successful exploitation could allow an attacker to gain administrative access, modify system configurations, and access or manipulate sensitive data. |
| There is a command injection vulnerability in the PAPI protocol (Aruba's access point management protocol) of AOS-8 that could lead to unauthenticated remote code execution by sending specially crafted packets to the affected UDP port. Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system. |
| An unauthenticated SQL injection vulnerability exists in the PAPI protocol in AOS-8. Successful exploitation could allow an unauthenticated remote attacker to obtain and modify sensitive information in the underlying database and to interrupt the normal operation of the affected service. |
| Command injection vulnerabilities in the affected interface of AOS-8 could allow an authenticated remote attacker with high privileges to perform command injection. Successful exploitation could allow an attacker to execute commands with the privileges of the impacted mechanism on the underlying operating system. |
| CAI Content Credentials is affected by an Improper Input Validation vulnerability that could result in a Security feature bypass. An attacker could leverage this vulnerability to bypass security measures and gain unauthorized limited write access. Exploitation of this issue does not require user interaction. |
| Improper synchronization in the OpenVPN ovpn-dco-win for Windows versions 0.6.5 through 1.3.5 and 2.4.0 through 2.8.7 allows local attackers to trigger a deadlock via a crafted write to the ovpn-dco device, causing the host to become unresponsive. |
| In the Linux kernel, the following vulnerability has been resolved:
ibmveth: h_free logical LAN on open-fail after register
ibmveth_open() registers the logical LAN, then allocates the RX
buffer pools. A pool failure jumps to out_free_buffer_pools without
h_free_logical_lan(), so PHYP still owns the buffer-list page when
it is unmapped. request_irq() failure already issued the hypercall
before taking the same label.
Move that h_free to the shared post-register unwind so both paths
deregister before the buffer list is unmapped. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix XSK buffer leak when rings are stopped
GVE does not free XSK buffers when resetting ring state as a part of
stopping queues. This causes all XSK buffers which are posted to the
NIC to be leaked.
Free XSK buffers attached to an allocated buf_state when stopping rings.
This issue was hit in production. |
