| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mana_ib: Disable RX steering on RSS QP destroy
When an RSS QP is destroyed (e.g. DPDK exit), mana_ib_destroy_qp_rss()
destroys the RX WQ objects but does not disable vPort RX steering in
firmware. This leaves stale steering configuration that still points to
the destroyed RX objects.
If traffic continues to arrive (e.g. peer VM is still transmitting) and
the VF interface is subsequently brought up (mana_open), the firmware
may deliver completions using stale CQ IDs from the old RX objects.
These CQ IDs can be reused by the ethernet driver for new TX CQs,
causing RX completions to land on TX CQs:
WARNING: mana_poll_tx_cq+0x1b8/0x220 [mana] (is_sq == false)
WARNING: mana_gd_process_eq_events+0x209/0x290 (cq_table lookup fails)
Fix this by disabling vPort RX steering before destroying RX WQ objects.
Note that mana_fence_rqs() cannot be used here because the fence
completion is delivered on the CQ, which is polled by user-mode (e.g.
DPDK) and not visible to the kernel driver.
Refactor the disable logic into a shared mana_disable_vport_rx() in
mana_en, exported for use by mana_ib, replacing the duplicate code.
The ethernet driver's mana_dealloc_queues() is also updated to call
this common function. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Raise #UD if unhandled VMMCALL isn't intercepted by L1
Explicitly synthesize a #UD for VMMCALL if L2 is active, L1 does NOT want
to intercept VMMCALL, nested_svm_l2_tlb_flush_enabled() is true, and the
hypercall is something other than one of the supported Hyper-V hypercalls.
When all of the above conditions are met, KVM will intercept VMMCALL but
never forward it to L1, i.e. will let L2 make hypercalls as if it were L1.
The TLFS says a whole lot of nothing about this scenario, so go with the
architectural behavior, which says that VMMCALL #UDs if it's not
intercepted.
Opportunistically do a 2-for-1 stub trade by stub-ifying the new API
instead of the helpers it uses. The last remaining "single" stub will
soon be dropped as well.
[sean: rewrite changelog and comment, tag for stable, remove defunct stubs] |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: atmel-sha204a - Fix potential UAF and memory leak in remove path
Unregister the hwrng to prevent new ->read() calls and flush the Atmel
I2C workqueue before teardown to prevent a potential UAF if a queued
callback runs while the device is being removed.
Drop the early return to ensure sysfs entries are removed and
->hwrng.priv is freed, preventing a memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: ch341: fix memory leaks on probe failures
Make sure to deregister the controller, disable pins, and kill and free
the RX URB on probe failures to mirror disconnect and avoid memory
leaks and use-after-free.
Also add an explicit URB kill on disconnect for symmetry (even if that
is not strictly required as USB core would have stopped it in the
current setup). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Avoid clearing VMCB_LBR in vmcb12
svm_copy_lbrs() always marks VMCB_LBR dirty in the destination VMCB.
However, nested_svm_vmexit() uses it to copy LBRs to vmcb12, and
clearing clean bits in vmcb12 is not architecturally defined.
Move vmcb_mark_dirty() to callers and drop it for vmcb12.
This also facilitates incoming refactoring that does not pass the entire
VMCB to svm_copy_lbrs(). |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5: validate payload size before accessing journal metadata
r5c_recovery_analyze_meta_block() and
r5l_recovery_verify_data_checksum_for_mb() iterate over payloads in a
journal metadata block using on-disk payload size fields without
validating them against the remaining space in the metadata block.
A corrupted journal contains payload sizes extending beyond the PAGE_SIZE
boundary can cause out-of-bounds reads when accessing payload fields or
computing offsets.
Add bounds validation for each payload type to ensure the full payload
fits within meta_size before processing. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: nx - fix bounce buffer leaks in nx842_crypto_{alloc,free}_ctx
The bounce buffers are allocated with __get_free_pages() using
BOUNCE_BUFFER_ORDER (order 2 = 4 pages), but both the allocation error
path and nx842_crypto_free_ctx() release the buffers with free_page().
Use free_pages() with the matching order instead. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix num_ops off-by-one when crypto allocation fails
move_dirty_folio_in_page_array() may fail if the file is encrypted, the
dirty folio is not the first in the batch, and it fails to allocate a
bounce buffer to hold the ciphertext. When that happens,
ceph_process_folio_batch() simply redirties the folio and flushes the
current batch -- it can retry that folio in a future batch.
However, if this failed folio is not contiguous with the last folio that
did make it into the batch, then ceph_process_folio_batch() has already
incremented `ceph_wbc->num_ops`; because it doesn't follow through and
add the discontiguous folio to the array, ceph_submit_write() -- which
expects that `ceph_wbc->num_ops` accurately reflects the number of
contiguous ranges (and therefore the required number of "write extent"
ops) in the writeback -- will panic the kernel:
BUG_ON(ceph_wbc->op_idx + 1 != req->r_num_ops);
This issue can be reproduced on affected kernels by writing to
fscrypt-enabled CephFS file(s) with a 4KiB-written/4KiB-skipped/repeat
pattern (total filesize should not matter) and gradually increasing the
system's memory pressure until a bounce buffer allocation fails.
Fix this crash by decrementing `ceph_wbc->num_ops` back to the correct
value when move_dirty_folio_in_page_array() fails, but the folio already
started counting a new (i.e. still-empty) extent.
The defect corrected by this patch has existed since 2022 (see first
`Fixes:`), but another bug blocked multi-folio encrypted writeback until
recently (see second `Fixes:`). The second commit made it into 6.18.16,
6.19.6, and 7.0-rc1, unmasking the panic in those versions. This patch
therefore fixes a regression (panic) introduced by cac190c7674f. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Always use NextRIP as vmcb02's NextRIP after first L2 VMRUN
For guests with NRIPS disabled, L1 does not provide NextRIP when running
an L2 with an injected soft interrupt, instead it advances the current RIP
before running it. KVM uses the current RIP as the NextRIP in vmcb02 to
emulate a CPU without NRIPS.
However, after L2 runs the first time, NextRIP will be updated by the CPU
and/or KVM, and the current RIP is no longer the correct value to use in
vmcb02. Hence, after save/restore, use the current RIP if and only if a
nested run is pending, otherwise use NextRIP. Give soft_int_next_rip the
same treatment, as it's the same logic, just for a narrower use case.
[sean: give soft_int_next_rip the same treatment] |
| In the Linux kernel, the following vulnerability has been resolved:
landlock: Fix LOG_SUBDOMAINS_OFF inheritance across fork()
hook_cred_transfer() only copies the Landlock security blob when the
source credential has a domain. This is inconsistent with
landlock_restrict_self() which can set LOG_SUBDOMAINS_OFF on a
credential without creating a domain (via the ruleset_fd=-1 path): the
field is committed but not preserved across fork() because the child's
prepare_creds() calls hook_cred_transfer() which skips the copy when
domain is NULL.
This breaks the documented use case where a process mutes subdomain logs
before forking sandboxed children: the children lose the muting and
their domains produce unexpected audit records.
Fix this by unconditionally copying the Landlock credential blob. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: Fix string overrun due to missing termination
When booting Ubuntu 26.04 with Linux 7.0-rc4 on an ARM64 Qualcomm
Snapdragon X1 we see a string buffer overrun:
BUG: KASAN: slab-out-of-bounds in aa_dfa_match (security/apparmor/match.c:535)
Read of size 1 at addr ffff0008901cc000 by task snap-update-ns/2120
CPU: 5 UID: 60578 PID: 2120 Comm: snap-update-ns Not tainted 7.0.0-rc4+ #22 PREEMPTLAZY
Hardware name: LENOVO 83ED/LNVNB161216, BIOS NHCN60WW 09/11/2025
Call trace:
show_stack (arch/arm64/kernel/stacktrace.c:501) (C)
dump_stack_lvl (lib/dump_stack.c:122)
print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:597)
__asan_report_load1_noabort (mm/kasan/report_generic.c:378)
aa_dfa_match (security/apparmor/match.c:535)
match_mnt_path_str (security/apparmor/mount.c:244 security/apparmor/mount.c:336)
match_mnt (security/apparmor/mount.c:371)
aa_bind_mount (security/apparmor/mount.c:447 (discriminator 4))
apparmor_sb_mount (security/apparmor/lsm.c:719 (discriminator 1))
security_sb_mount (security/security.c:1062 (discriminator 31))
path_mount (fs/namespace.c:4101)
__arm64_sys_mount (fs/namespace.c:4172 fs/namespace.c:4361 fs/namespace.c:4338 fs/namespace.c:4338)
invoke_syscall.constprop.0 (arch/arm64/kernel/syscall.c:35 arch/arm64/kernel/syscall.c:49)
el0_svc_common.constprop.0 (./include/linux/thread_info.h:142 (discriminator 2) arch/arm64/kernel/syscall.c:140 (discriminator 2))
do_el0_svc (arch/arm64/kernel/syscall.c:152)
el0_svc (arch/arm64/kernel/entry-common.c:80 arch/arm64/kernel/entry-common.c:725)
el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:744)
el0t_64_sync (arch/arm64/kernel/entry.S:596)
Allocated by task 2120:
kasan_save_stack (mm/kasan/common.c:58)
kasan_save_track (./arch/arm64/include/asm/current.h:19 mm/kasan/common.c:70 mm/kasan/common.c:79)
kasan_save_alloc_info (mm/kasan/generic.c:571)
__kasan_kmalloc (mm/kasan/common.c:419)
__kmalloc_noprof (./include/linux/kasan.h:263 mm/slub.c:5260 mm/slub.c:5272)
aa_get_buffer (security/apparmor/lsm.c:2201)
aa_bind_mount (security/apparmor/mount.c:442)
apparmor_sb_mount (security/apparmor/lsm.c:719 (discriminator 1))
security_sb_mount (security/security.c:1062 (discriminator 31))
path_mount (fs/namespace.c:4101)
__arm64_sys_mount (fs/namespace.c:4172 fs/namespace.c:4361 fs/namespace.c:4338 fs/namespace.c:4338)
invoke_syscall.constprop.0 (arch/arm64/kernel/syscall.c:35 arch/arm64/kernel/syscall.c:49)
el0_svc_common.constprop.0 (./include/linux/thread_info.h:142 (discriminator 2) arch/arm64/kernel/syscall.c:140 (discriminator 2))
do_el0_svc (arch/arm64/kernel/syscall.c:152)
el0_svc (arch/arm64/kernel/entry-common.c:80 arch/arm64/kernel/entry-common.c:725)
el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:744)
el0t_64_sync (arch/arm64/kernel/entry.S:596)
The buggy address belongs to the object at ffff0008901ca000
which belongs to the cache kmalloc-rnd-06-8k of size 8192
The buggy address is located 0 bytes to the right of
allocated 8192-byte region [ffff0008901ca000, ffff0008901cc000)
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x9101c8
head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:-1 pincount:0
flags: 0x8000000000000040(head|zone=2)
page_type: f5(slab)
raw: 8000000000000040 ffff000800016c40 fffffdffe2d14e10 ffff000800015c70
raw: 0000000000000000 0000000800010001 00000000f5000000 0000000000000000
head: 8000000000000040 ffff000800016c40 fffffdffe2d14e10 ffff000800015c70
head: 0000000000000000 0000000800010001 00000000f5000000 0000000000000000
head: 8000000000000003 fffffdffe2407201 fffffdffffffffff 00000000ffffffff
head: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000008
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff0008901cbf00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff0008
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi:ssif: Clean up kthread on errors
If an error occurs after the ssif kthread is created, but before the
main IPMI code starts the ssif interface, the ssif kthread will not
be stopped.
So make sure the kthread is stopped on an error condition if it is
running. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mempolicy: fix memory leaks in weighted_interleave_auto_store()
weighted_interleave_auto_store() fetches old_wi_state inside the if
(!input) block only. This causes two memory leaks:
1. When a user writes "false" and the current mode is already manual,
the function returns early without freeing the freshly allocated
new_wi_state.
2. When a user writes "true", old_wi_state stays NULL because the
fetch is skipped entirely. The old state is then overwritten by
rcu_assign_pointer() but never freed, since the cleanup path is
gated on old_wi_state being non-NULL. A user can trigger this
repeatedly by writing "1" in a loop.
Fix both leaks by moving the old_wi_state fetch before the input check,
making it unconditional. This also allows a unified early return for both
"true" and "false" when the requested mode matches the current mode.
Reviewed by: Donet Tom <donettom@linux.ibm.com> |
| IBM Controller 11.0.1, 11.1.0, 11.1.1, and 11.1.2 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: ns: Free the node during ctrl_cmd_bye()
A node sends the BYE packet when it is about to go down. So the nameserver
should advertise the removal of the node to all remote and local observers
and free the node finally. But currently, the nameserver doesn't free the
node memory even after processing the BYE packet. This causes the node
memory to leak.
Hence, remove the node from Xarray list and free the node memory during
both success and failure case of ctrl_cmd_bye(). |
| Adobe Acrobat Reader versions 22.001.20142 (and earlier), 20.005.30334 (and earlier) and 17.012.30229 (and earlier) are affected by a Use After Free vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slab: return NULL early from kmalloc_nolock() in NMI on UP
On UP kernels (!CONFIG_SMP), spin_trylock() is a no-op that
unconditionally succeeds even when the lock is already held. As a
result, kmalloc_nolock() called from NMI context can re-enter the slab
allocator and acquire n->list_lock that the interrupted context is
already holding, corrupting slab state.
With CONFIG_DEBUG_SPINLOCK on UP, the following BUG is triggered with
the slub_kunit test module:
BUG: spinlock trylock failure on UP on CPU#0, kunit_try_catch/243
[...]
Call Trace:
<NMI>
dump_stack_lvl+0x3f/0x60
do_raw_spin_trylock+0x41/0x50
_raw_spin_trylock+0x24/0x50
get_from_partial_node+0x120/0x4d0
___slab_alloc+0x8a/0x4c0
kmalloc_nolock_noprof+0x164/0x310
[...]
</NMI>
Fix this by returning NULL early when invoked from NMI on a UP kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: avoid early lgr access in smc_clc_wait_msg
A CLC decline can be received while the handshake is still in an early
stage, before the connection has been associated with a link group.
The decline handling in smc_clc_wait_msg() updates link-group level sync
state for first-contact declines, but that state only exists after link
group setup has completed. Guard the link-group update accordingly and
keep the per-socket peer diagnosis handling unchanged.
This preserves the existing sync_err handling for established link-group
contexts and avoids touching link-group state before it is available. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: ns: Limit the maximum number of lookups
Current code does no bound checking on the number of lookups a client can
perform. Though the code restricts the lookups to local clients, there is
still a possibility of a malicious local client sending a flood of
NEW_LOOKUP messages over the same socket.
Fix this issue by limiting the maximum number of lookups to 64 globally.
Since the nameserver allows only atmost one local observer, this global
lookup count will ensure that the lookups stay within the limit.
Note that, limit of 64 is chosen based on the current platform
requirements. If requirement changes in the future, this limit can be
increased. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: fix damon_call() vs kdamond_fn() exit race
Patch series "mm/damon/core: fix damon_call()/damos_walk() vs kdmond exit
race".
damon_call() and damos_walk() can leak memory and/or deadlock when they
race with kdamond terminations. Fix those.
This patch (of 2);
When kdamond_fn() main loop is finished, the function cancels all
remaining damon_call() requests and unset the damon_ctx->kdamond so that
API callers and API functions themselves can know the context is
terminated. damon_call() adds the caller's request to the queue first.
After that, it shows if the kdamond of the damon_ctx is still running
(damon_ctx->kdamond is set). Only if the kdamond is running, damon_call()
starts waiting for the kdamond's handling of the newly added request.
The damon_call() requests registration and damon_ctx->kdamond unset are
protected by different mutexes, though. Hence, damon_call() could race
with damon_ctx->kdamond unset, and result in deadlocks.
For example, let's suppose kdamond successfully finished the damon_call()
requests cancelling. Right after that, damon_call() is called for the
context. It registers the new request, and shows the context is still
running, because damon_ctx->kdamond unset is not yet done. Hence the
damon_call() caller starts waiting for the handling of the request.
However, the kdamond is already on the termination steps, so it never
handles the new request. As a result, the damon_call() caller threads
infinitely waits.
Fix this by introducing another damon_ctx field, namely
call_controls_obsolete. It is protected by the
damon_ctx->call_controls_lock, which protects damon_call() requests
registration. Initialize (unset) it in kdamond_fn() before letting
damon_start() returns and set it just before the cancelling of remaining
damon_call() requests is executed. damon_call() reads the obsolete field
under the lock and avoids adding a new request.
After this change, only requests that are guaranteed to be handled or
cancelled are registered. Hence the after-registration DAMON context
termination check is no longer needed. Remove it together.
Note that the deadlock will not happen when damon_call() is called for
repeat mode request. In tis case, damon_call() returns instead of waiting
for the handling when the request registration succeeds and it shows the
kdamond is running. However, if the request also has dealloc_on_cancel,
the request memory would be leaked.
The issue is found by sashiko [1]. |
