| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the egress MPLS packet processing function of Cisco IOS XE Software for Cisco Catalyst 3650, Catalyst 3850, and Catalyst 9000 Family Switches could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to insufficient input validation of IPv4 traffic. An attacker could exploit this vulnerability by sending a malformed packet out of an affected MPLS-enabled interface. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |
| A vulnerability in the SSL/TLS implementation of Cisco Nexus Dashboard could allow an unauthenticated, remote attacker to alter communications with associated controllers or view sensitive information. This vulnerability exists because SSL server certificates are not validated when Cisco Nexus Dashboard is establishing a connection to Cisco Application Policy Infrastructure Controller (APIC), Cisco Cloud APIC, or Cisco Nexus Dashboard Fabric Controller, formerly Data Center Network Manager (DCNM) controllers. An attacker could exploit this vulnerability by using man-in-the-middle techniques to intercept the traffic between the affected device and the controllers, and then using a crafted certificate to impersonate the controllers. A successful exploit could allow the attacker to alter communications between devices or view sensitive information, including Administrator credentials for these controllers. |
| A vulnerability in the processing of Control and Provisioning of Wireless Access Points (CAPWAP) Mobility messages in Cisco IOS XE Wireless Controller Software for the Catalyst 9000 Family could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to a logic error and improper management of resources related to the handling of CAPWAP Mobility messages. An attacker could exploit this vulnerability by sending crafted CAPWAP Mobility packets to an affected device. A successful exploit could allow the attacker to exhaust resources on the affected device. This would cause the device to reload, resulting in a DoS condition. |
| A vulnerability in the self-healing functionality of Cisco IOS XE Software for Embedded Wireless Controllers on Catalyst Access Points could allow an authenticated, local attacker to escape the restricted controller shell and execute arbitrary commands on the underlying operating system of the access point. This vulnerability is due to improper checks throughout the restart of certain system processes. An attacker could exploit this vulnerability by logging on to an affected device and executing certain CLI commands. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS as root. To successfully exploit this vulnerability, an attacker would need valid credentials for a privilege level 15 user of the wireless controller. |
| A vulnerability in the UDP processing functionality of Cisco IOS XE Software for Embedded Wireless Controllers on Catalyst 9100 Series Access Points could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to the improper processing of UDP datagrams. An attacker could exploit this vulnerability by sending malicious UDP datagrams to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |
| A vulnerability in the DHCP processing functionality of Cisco IOS XE Wireless Controller Software for the Catalyst 9000 Family could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to the improper processing of DHCP messages. An attacker could exploit this vulnerability by sending malicious DHCP messages to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |
| A vulnerability in the DNS application layer gateway (ALG) functionality that is used by Network Address Translation (NAT) in Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. This vulnerability is due to a logic error that occurs when an affected device inspects certain TCP DNS packets. An attacker could exploit this vulnerability by sending crafted DNS packets through the affected device that is performing NAT for DNS packets. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition on the affected device. Note: This vulnerability can be exploited only by sending IPv4 TCP packets through an affected device. This vulnerability cannot be exploited by sending IPv6 traffic. |
| A vulnerability in the Cisco Discovery Protocol feature of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code with root privileges or cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper input validation of specific values that are within a Cisco Discovery Protocol message. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to execute arbitrary code with root privileges or cause the Cisco Discovery Protocol process to crash and restart multiple times, which would cause the affected device to reload, resulting in a DoS condition. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). |
| A vulnerability in the OSPF version 3 (OSPFv3) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to incomplete input validation of specific OSPFv3 packets. An attacker could exploit this vulnerability by sending a malicious OSPFv3 link-state advertisement (LSA) to an affected device. A successful exploit could allow the attacker to cause the OSPFv3 process to crash and restart multiple times, causing the affected device to reload and resulting in a DoS condition. Note: The OSPFv3 feature is disabled by default. To exploit this vulnerability, an attacker must be able to establish a full OSPFv3 neighbor state with an affected device. For more information about exploitation conditions, see the Details section of this advisory. |
| A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to read and delete files on an affected device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request that contains certain character sequences to an affected system. A successful exploit could allow the attacker to read or delete specific files on the device that their configured administrative level should not have access to. Cisco plans to release software updates that address this vulnerability. |
| A vulnerability in Cisco Unified IP Phones could allow an unauthenticated, remote attacker to impersonate another user's phone if the Cisco Unified Communications Manager (CUCM) is in secure mode. This vulnerability is due to improper key generation during the manufacturing process that could result in duplicated manufactured keys installed on multiple devices. An attacker could exploit this vulnerability by performing a machine-in-the-middle attack on the secure communication between the phone and the CUCM. A successful exploit could allow the attacker to impersonate another user's phone. This vulnerability cannot be addressed with software updates. There is a workaround that addresses this vulnerability. |
| A vulnerability in Cisco Smart Software Manager On-Prem (SSM On-Prem) could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to incorrect handling of multiple simultaneous device registrations on Cisco SSM On-Prem. An attacker could exploit this vulnerability by sending multiple device registration requests to Cisco SSM On-Prem. A successful exploit could allow the attacker to cause a DoS condition on an affected device. |
| A vulnerability in the OLE2 file parser of Clam AntiVirus (ClamAV) versions 0.104.0 through 0.104.2 could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device.The vulnerability is due to incorrect use of the realloc function that may result in a double-free. An attacker could exploit this vulnerability by submitting a crafted OLE2 file to be scanned by ClamAV on the affected device. An exploit could allow the attacker to cause the ClamAV scanning process to crash, resulting in a denial of service condition. |
| A vulnerability in the regex module used by the signature database load module of Clam AntiVirus (ClamAV) versions 0.104.0 through 0.104.2 and LTS version 0.103.5 and prior versions could allow an authenticated, local attacker to crash ClamAV at database load time, and possibly gain code execution. The vulnerability is due to improper bounds checking that may result in a multi-byte heap buffer overwflow write. An attacker could exploit this vulnerability by placing a crafted CDB ClamAV signature database file in the ClamAV database directory. An exploit could allow the attacker to run code as the clamav user. |
| On April 20, 2022, the following vulnerability in the ClamAV scanning library versions 0.103.5 and earlier and 0.104.2 and earlier was disclosed: A vulnerability in HTML file parser of Clam AntiVirus (ClamAV) versions 0.104.0 through 0.104.2 and LTS version 0.103.5 and prior versions could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. For a description of this vulnerability, see the ClamAV blog. This advisory will be updated as additional information becomes available. |
| A vulnerability in the packet processing functionality of Cisco TelePresence Collaboration Endpoint (CE) Software and Cisco RoomOS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted H.323 traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to either reboot normally or reboot into maintenance mode, which could result in a DoS condition on the device. |
| A vulnerability in the key-based SSH authentication mechanism of Cisco Umbrella Virtual Appliance (VA) could allow an unauthenticated, remote attacker to impersonate a VA. This vulnerability is due to the presence of a static SSH host key. An attacker could exploit this vulnerability by performing a man-in-the-middle attack on an SSH connection to the Umbrella VA. A successful exploit could allow the attacker to learn the administrator credentials, change configurations, or reload the VA. Note: SSH is not enabled by default on the Umbrella VA. |
| On April 20, 2022, the following vulnerability in the ClamAV scanning library versions 0.103.5 and earlier and 0.104.2 and earlier was disclosed: A vulnerability in the TIFF file parser of Clam AntiVirus (ClamAV) versions 0.104.0 through 0.104.2 and LTS version 0.103.5 and prior versions could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. For a description of this vulnerability, see the ClamAV blog. This advisory will be updated as additional information becomes available. |
| On April 20, 2022, the following vulnerability in the ClamAV scanning library versions 0.103.5 and earlier and 0.104.2 and earlier was disclosed: A vulnerability in CHM file parser of Clam AntiVirus (ClamAV) versions 0.104.0 through 0.104.2 and LTS version 0.103.5 and prior versions could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. For a description of this vulnerability, see the ClamAV blog. This advisory will be updated as additional information becomes available. |
| A vulnerability in the authentication functionality of Cisco Wireless LAN Controller (WLC) AireOS Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient error validation. An attacker could exploit this vulnerability by sending crafted packets to an affected device. A successful exploit could allow the attacker to cause the wireless LAN controller to crash, resulting in a DoS condition. Note: This vulnerability affects only devices that have Federal Information Processing Standards (FIPS) mode enabled. |
