| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: vivid: fix cleanup bugs in vivid_init()
When platform_device_register() fails in vivid_init(), the embedded
struct device in vivid_pdev has already been initialized by
device_initialize(), but the failure path jumps to free_output_strings
without dropping the device reference for the current platform device:
vivid_init()
-> platform_device_register(&vivid_pdev)
-> device_initialize(&vivid_pdev.dev)
-> setup_pdev_dma_masks(&vivid_pdev)
-> platform_device_add(&vivid_pdev)
This leads to a reference leak when platform_device_register() fails.
Fix this by calling platform_device_put() before jumping to the common
cleanup path.
Also, the unreg_driver label incorrectly calls
platform_driver_register() instead of platform_driver_unregister(),
which breaks cleanup when workqueue creation fails after successful
driver registration. Fix that as well.
The reference leak was identified by a static analysis tool I developed
and confirmed by manual review. The incorrect cleanup call was found
during code inspection. |
| In the Linux kernel, the following vulnerability has been resolved:
media: nuvoton: npcm-video: fix memory leaks in probe and remove
npcm_video_probe() allocates the npcm_video structure with kzalloc_obj()
but never frees it on any probe error path or in npcm_video_remove(),
leaking the allocation on every failed probe and every normal unbind.
Additionally, when npcm_video_setup_video() fails, the reserved memory
association established by of_reserved_mem_device_init() in
npcm_video_init() is not released, leaking the rmem_assigned_device
entry on the global list.
Fix both by adding kfree(video) to all probe error paths and to
npcm_video_remove(), and adding the missing
of_reserved_mem_device_release() call when npcm_video_setup_video()
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
media: nxp: imx8-isi: Add missing v4l2_subdev_cleanup() in crossbar and pipe
Both mxc_isi_crossbar_init() and mxc_isi_pipe_init() call
v4l2_subdev_init_finalize() which allocates the subdev active state,
but neither mxc_isi_crossbar_cleanup() nor mxc_isi_pipe_cleanup()
calls v4l2_subdev_cleanup() to free it.
This causes a memory leak on every rmmod, reported by kmemleak:
unreferenced object 0xffff0000d06fc800 (size 192):
comm "(udev-worker)", pid 254, jiffies 4294913455
backtrace (crc 36eeae58):
kmemleak_alloc+0x34/0x40
__kvmalloc_node_noprof+0x5f8/0x7d8
__v4l2_subdev_state_alloc+0x1fc/0x30c
__v4l2_subdev_init_finalize+0x178/0x368
Add the missing v4l2_subdev_cleanup() calls before media_entity_cleanup()
in both crossbar and pipe cleanup paths. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Release VFCT ACPI table reference
amdgpu_acpi_vfct_bios() fetches the VFCT table with acpi_get_table()
but never releases it. acpi_get_table() takes a reference on the
table (incrementing its validation_count and mapping it on the 0->1
transition); without a paired acpi_put_table() the mapping is leaked
on every call, whether or not a matching VBIOS image is found.
Route all exit paths after the table is acquired through a common
acpi_put_table(). The VBIOS image is copied out with kmemdup() before
the table is released, so it remains valid for the caller.
(cherry picked from commit ca5988682b4cba4cd125a0fa99b2de1239164ae4) |
| In the Linux kernel, the following vulnerability has been resolved:
media: stm32-dcmipp: Return queued buffers on start_streaming() failure
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
dcmipp_bytecap_start_streaming() returned -EINVAL when the source
subdevice could not be resolved from the media graph, before
pm_runtime_resume_and_get() and media_pipeline_start() had been called.
The remaining error paths already converge on the err_buffer_done
label, which calls dcmipp_bytecap_all_buffers_done(...,
VB2_BUF_STATE_QUEUED). Jump to that label directly: the intermediate
err_pm_put / err_media_pipeline_stop labels are skipped, which is
correct because nothing they would undo has happened yet.
This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo:
Return queued buffers on start_streaming() failure"). |
| In the Linux kernel, the following vulnerability has been resolved:
ice: prevent tstamp ring allocation for non-PF VSI types
The pf->txtime_txqs bitmap tracks which Tx queues have ETF (Earliest
TxTime First) offload enabled. This bitmap is indexed by queue number
and is set by ice_offload_txtime(), which only operates on PF VSI
queues.
However, ice_is_txtime_ena() does not check the VSI type before
consulting the bitmap. When ETF offload is enabled on PF Tx queue 0,
bit 0 is set in pf->txtime_txqs. During a subsequent PCI reset
rebuild, the CTRL VSI's Tx queue 0 is reconfigured and
ice_is_txtime_ena() is called for that ring. Since it only checks
pf->txtime_txqs by queue index without distinguishing VSI type, it
finds bit 0 set and returns true, matching the PF VSI's ETF queue,
not the CTRL VSI's. This causes ice_vsi_cfg_txq() to spuriously
allocate a tstamp_ring for the CTRL VSI ring.
Since CTRL VSI rings have no associated netdev, ice_clean_tx_ring()
takes an early return at the !netdev check before reaching
ice_free_tx_tstamp_ring(), leaking the allocation. Each PCI reset
leaks one 64-byte tstamp_ring.
Fix this by restricting ice_is_txtime_ena() to return true only for
PF VSI rings, since txtime_txqs is only meaningful for PF VSI queues. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: BPF: Fix memory leak in bpf_jit_free()
When bpf_int_jit_compile() is called for subprograms, it returns early
during the first pass (!prog->is_func || extra_pass is false), keeping
ctx->offset alive for the subsequent extra pass.
If JIT compilation fails for a later subprogram, the BPF core aborts and
calls bpf_jit_free() to clean up the first subprogram. However,
bpf_jit_free() fails to free jit_data->ctx.offset, which causes a memory
leak of the JIT context offsets array.
So fix this by adding the missing kvfree(jit_data->ctx.offset) in
bpf_jit_free(). |
| Missing bounds check in the annotator function of Zoom Clients allows buffer over-write, which may allow a meeting participant to achieve remote code execution of another participant via network access. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx: fix cleaner shader IB buffer overflow
The cleaner shader sysfs path allocates a 16-dword (64 byte) IB but
incorrectly fills (align_mask + 1) dwords. On GFX rings align_mask is
0xff, so the loop wrote 256 dwords into a 64-byte buffer, causing a
kernel page fault.
The IB only needs to be a minimal NOP shell to schedule the job; the
cleaner shader itself is emitted on the ring via emit_cleaner_shader().
Fill 16 dwords to match the allocation.
v2: Use ib_size_dw variable (Lijo)
(cherry picked from commit bf21af331ebf72d0935fd70c73192414a422c03a) |
| Out-of-bounds write in the firmware for the Intel(R) Slim Bootloader may allow a denial of service. System software adversary with a privileged user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (low) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| In the Linux kernel, the following vulnerability has been resolved:
net: txgbe: fix FDIR filter leak on remove
Perfect FDIR filters can be added while the interface is down and are
kept on the software list for later restore. unregister_netdev() only
calls ndo_stop when the device is up, so txgbe_fdir_filter_exit() in
txgbe_close() is skipped in that case and the filters are leaked on
driver remove. Free the filter list from txgbe_remove() as well. |
| Activepieces is an open source AI workflow automation platform. Prior to 0.80.0, the worker's code-compilation pipeline builds the on-disk path for a Code step from the step's name and passes that path to a shell-invoked build command. A step name containing shell metacharacters can break out of the intended build invocation and execute arbitrary commands during compilation before any code sandbox is created. An authenticated user with permission to create or edit a flow can execute commands as the worker process user, read and write the worker filesystem, exfiltrate environment secrets, and reach internal services available to the worker. This issue is fixed in version 0.80.0. |
| Activepieces is an open source AI workflow automation platform. Prior to 0.83.0, the /api/redirect OAuth callback endpoint embeds the user-supplied code query parameter directly into an inline script block without proper escaping. A crafted request to /api/redirect with a malicious code value can break out of the script context and execute arbitrary JavaScript in the Activepieces origin when a logged-in user opens it. An unauthenticated attacker can access the victim's session tokens or make authenticated API calls on the victim's behalf. This issue is fixed in version 0.83.0. |
| RustFS is a distributed object storage system built in Rust. Prior to 1.0.0-rc.1, RustFS Object Lock enforcement in crates/ecstore/src/bucket/object_lock/objectlock_sys.rs lets check_object_lock_for_deletion, delete_prefix, and lifecycle and scanner sweeps treat ConfigNotFound, unreadable .metadata.bin data, or unparseable metadata as no lock configuration, allowing objects under COMPLIANCE retention to be deleted or expired. This issue is fixed in version 1.0.0-rc.1. |
| Prowler is a cloud security platform. Prior to 5.37.0, Prowler's HTML output formatter in prowler/lib/outputs/html/html.py inserted finding.resource_tags, assembled by unroll_dict and parse_html_string, into generated reports without HTML escaping, allowing a cloud principal who can modify a scanned resource tag to store HTML or JavaScript that executes when another user opens the report. This issue is fixed in version 5.37.0. |
| Coturn is a free open source implementation of TURN and STUN Server. Prior to 4.16.0, dtls_server_input_handler() and create_new_connected_udp_socket() in src/apps/relay/dtls_listener.c retain OpenSSL dtls1_reassemble_fragment() state for a 35-byte fragmented ClientHello declaring a 650,000-byte handshake before cookie validation, allowing an unauthenticated remote sender using fresh UDP tuples to exhaust memory without TURN credentials, a completed handshake, a valid cookie, or source spoofing. This issue is fixed in version 4.16.0. |
| Dokploy is a free, self-hostable Platform as a Service (PaaS). Prior to 0.29.13, Dokploy allows an authenticated user to execute arbitrary commands on a local or SSH-connected target server because registry.testRegistry and registry.testRegistryById in apps/dokploy/server/api/routers/registry.ts interpolate the password field into an execAsyncRemote shell command instead of using safeDockerLoginCommand. This issue is fixed in version 0.29.13. |
| Dokploy is a free, self-hostable Platform as a Service (PaaS). Prior to 0.29.13, Dokploy's backup and restore pipeline constructs shell commands by directly interpolating user-controlled database fields into bash -c "..." and sh -c "..." strings, then executes them via child_process.exec(). An authenticated admin/owner can inject arbitrary OS commands that execute on the host machine running Dokploy (not just inside a container). This vulnerability is fixed in 0.29.13. |
| Dokploy is a free, self-hostable Platform as a Service (PaaS). Prior to 0.29.13, apps/dokploy/server/api/routers/destination.ts interpolates the accessKey, secretAccessKey, region, endpoint, provider, and bucket fields from destination.testConnection into an rclone ls command executed through child_process.exec. The `withPermission("destination", "create")` path permits a low-privileged organization member to reach the mutation, close a quoted argument with a crafted field, and execute arbitrary commands in the root Dokploy container, which has access to the host Docker socket. This issue is fixed in version 0.29.13. |
| Ruby LSP is an implementation of the language server protocol for Ruby. Several workspace-level settings in the Ruby LSP VS Code extension prior to version 0.10.4 could override the path to the Ruby executable, the version manager executables, or the Bundler `Gemfile` used at startup. A malicious repository containing a `.vscode/settings.json` could set these values to attacker-controlled targets. Opening and trusting the repository would then execute code with the privileges of the developer. The Ruby LSP gem and clients of the language server in other editors are not affected. Version 0.10.4 of the Ruby LSP VS Code extension fixes the issue. |
