| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c: hi846: Fix memory leak in hi846_parse_dt()
If any of the checks related to the supported link frequencies fail, then
the V4L2 fwnode resources don't get released before returning, which leads
to a memleak. Fix this by properly freeing the V4L2 fwnode data in a
designated label. |
| In the Linux kernel, the following vulnerability has been resolved:
media: solo6x10: fix possible memory leak in solo_sysfs_init()
If device_register() returns error in solo_sysfs_init(), the
name allocated by dev_set_name() need be freed. As comment of
device_register() says, it should use put_device() to give up
the reference in the error path. So fix this by calling
put_device(), then the name can be freed in kobject_cleanup(). |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix uninititialized value in 'ext4_evict_inode'
Syzbot found the following issue:
=====================================================
BUG: KMSAN: uninit-value in ext4_evict_inode+0xdd/0x26b0 fs/ext4/inode.c:180
ext4_evict_inode+0xdd/0x26b0 fs/ext4/inode.c:180
evict+0x365/0x9a0 fs/inode.c:664
iput_final fs/inode.c:1747 [inline]
iput+0x985/0xdd0 fs/inode.c:1773
__ext4_new_inode+0xe54/0x7ec0 fs/ext4/ialloc.c:1361
ext4_mknod+0x376/0x840 fs/ext4/namei.c:2844
vfs_mknod+0x79d/0x830 fs/namei.c:3914
do_mknodat+0x47d/0xaa0
__do_sys_mknodat fs/namei.c:3992 [inline]
__se_sys_mknodat fs/namei.c:3989 [inline]
__ia32_sys_mknodat+0xeb/0x150 fs/namei.c:3989
do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
__do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178
do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203
do_SYSENTER_32+0x1b/0x20 arch/x86/entry/common.c:246
entry_SYSENTER_compat_after_hwframe+0x70/0x82
Uninit was created at:
__alloc_pages+0x9f1/0xe80 mm/page_alloc.c:5578
alloc_pages+0xaae/0xd80 mm/mempolicy.c:2285
alloc_slab_page mm/slub.c:1794 [inline]
allocate_slab+0x1b5/0x1010 mm/slub.c:1939
new_slab mm/slub.c:1992 [inline]
___slab_alloc+0x10c3/0x2d60 mm/slub.c:3180
__slab_alloc mm/slub.c:3279 [inline]
slab_alloc_node mm/slub.c:3364 [inline]
slab_alloc mm/slub.c:3406 [inline]
__kmem_cache_alloc_lru mm/slub.c:3413 [inline]
kmem_cache_alloc_lru+0x6f3/0xb30 mm/slub.c:3429
alloc_inode_sb include/linux/fs.h:3117 [inline]
ext4_alloc_inode+0x5f/0x860 fs/ext4/super.c:1321
alloc_inode+0x83/0x440 fs/inode.c:259
new_inode_pseudo fs/inode.c:1018 [inline]
new_inode+0x3b/0x430 fs/inode.c:1046
__ext4_new_inode+0x2a7/0x7ec0 fs/ext4/ialloc.c:959
ext4_mkdir+0x4d5/0x1560 fs/ext4/namei.c:2992
vfs_mkdir+0x62a/0x870 fs/namei.c:4035
do_mkdirat+0x466/0x7b0 fs/namei.c:4060
__do_sys_mkdirat fs/namei.c:4075 [inline]
__se_sys_mkdirat fs/namei.c:4073 [inline]
__ia32_sys_mkdirat+0xc4/0x120 fs/namei.c:4073
do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
__do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178
do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203
do_SYSENTER_32+0x1b/0x20 arch/x86/entry/common.c:246
entry_SYSENTER_compat_after_hwframe+0x70/0x82
CPU: 1 PID: 4625 Comm: syz-executor.2 Not tainted 6.1.0-rc4-syzkaller-62821-gcb231e2f67ec #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
=====================================================
Now, 'ext4_alloc_inode()' didn't init 'ei->i_flags'. If new inode failed
before set 'ei->i_flags' in '__ext4_new_inode()', then do 'iput()'. As after
6bc0d63dad7f commit will access 'ei->i_flags' in 'ext4_evict_inode()' which
will lead to access uninit-value.
To solve above issue just init 'ei->i_flags' in 'ext4_alloc_inode()'. |
| In the Linux kernel, the following vulnerability has been resolved:
r6040: Fix kmemleak in probe and remove
There is a memory leaks reported by kmemleak:
unreferenced object 0xffff888116111000 (size 2048):
comm "modprobe", pid 817, jiffies 4294759745 (age 76.502s)
hex dump (first 32 bytes):
00 c4 0a 04 81 88 ff ff 08 10 11 16 81 88 ff ff ................
08 10 11 16 81 88 ff ff 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff815bcd82>] kmalloc_trace+0x22/0x60
[<ffffffff827e20ee>] phy_device_create+0x4e/0x90
[<ffffffff827e6072>] get_phy_device+0xd2/0x220
[<ffffffff827e7844>] mdiobus_scan+0xa4/0x2e0
[<ffffffff827e8be2>] __mdiobus_register+0x482/0x8b0
[<ffffffffa01f5d24>] r6040_init_one+0x714/0xd2c [r6040]
...
The problem occurs in probe process as follows:
r6040_init_one:
mdiobus_register
mdiobus_scan <- alloc and register phy_device,
the reference count of phy_device is 3
r6040_mii_probe
phy_connect <- connect to the first phy_device,
so the reference count of the first
phy_device is 4, others are 3
register_netdev <- fault inject succeeded, goto error handling path
// error handling path
err_out_mdio_unregister:
mdiobus_unregister(lp->mii_bus);
err_out_mdio:
mdiobus_free(lp->mii_bus); <- the reference count of the first
phy_device is 1, it is not released
and other phy_devices are released
// similarly, the remove process also has the same problem
The root cause is traced to the phy_device is not disconnected when
removes one r6040 device in r6040_remove_one() or on error handling path
after r6040_mii probed successfully. In r6040_mii_probe(), a net ethernet
device is connected to the first PHY device of mii_bus, in order to
notify the connected driver when the link status changes, which is the
default behavior of the PHY infrastructure to handle everything.
Therefore the phy_device should be disconnected when removes one r6040
device or on error handling path.
Fix it by adding phy_disconnect() when removes one r6040 device or on
error handling path after r6040_mii probed successfully. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info()
xhci_alloc_stream_info() allocates stream context array for stream_info
->stream_ctx_array with xhci_alloc_stream_ctx(). When some error occurs,
stream_info->stream_ctx_array is not released, which will lead to a
memory leak.
We can fix it by releasing the stream_info->stream_ctx_array with
xhci_free_stream_ctx() on the error path to avoid the potential memory
leak. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix mr->map double free
rxe_mr_cleanup() which tries to free mr->map again will be called when
rxe_mr_init_user() fails:
CPU: 0 PID: 4917 Comm: rdma_flush_serv Kdump: loaded Not tainted 6.1.0-rc1-roce-flush+ #25
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x45/0x5d
panic+0x19e/0x349
end_report.part.0+0x54/0x7c
kasan_report.cold+0xa/0xf
rxe_mr_cleanup+0x9d/0xf0 [rdma_rxe]
__rxe_cleanup+0x10a/0x1e0 [rdma_rxe]
rxe_reg_user_mr+0xb7/0xd0 [rdma_rxe]
ib_uverbs_reg_mr+0x26a/0x480 [ib_uverbs]
ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x1a2/0x250 [ib_uverbs]
ib_uverbs_cmd_verbs+0x1397/0x15a0 [ib_uverbs]
This issue was firstly exposed since commit b18c7da63fcb ("RDMA/rxe: Fix
memory leak in error path code") and then we fixed it in commit
8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") but this
fix was reverted together at last by commit 1e75550648da (Revert
"RDMA/rxe: Create duplicate mapping tables for FMRs")
Simply let rxe_mr_cleanup() always handle freeing the mr->map once it is
successfully allocated. |
| In the Linux kernel, the following vulnerability has been resolved:
media: si470x: Fix use-after-free in si470x_int_in_callback()
syzbot reported use-after-free in si470x_int_in_callback() [1]. This
indicates that urb->context, which contains struct si470x_device
object, is freed when si470x_int_in_callback() is called.
The cause of this issue is that si470x_int_in_callback() is called for
freed urb.
si470x_usb_driver_probe() calls si470x_start_usb(), which then calls
usb_submit_urb() and si470x_start(). If si470x_start_usb() fails,
si470x_usb_driver_probe() doesn't kill urb, but it just frees struct
si470x_device object, as depicted below:
si470x_usb_driver_probe()
...
si470x_start_usb()
...
usb_submit_urb()
retval = si470x_start()
return retval
if (retval < 0)
free struct si470x_device object, but don't kill urb
This patch fixes this issue by killing urb when si470x_start_usb()
fails and urb is submitted. If si470x_start_usb() fails and urb is
not submitted, i.e. submitting usb fails, it just frees struct
si470x_device object. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: ti: k3-udma: Reset UDMA_CHAN_RT byte counters to prevent overflow
UDMA_CHAN_RT_*BCNT_REG stores the real-time channel bytecount statistics.
These registers are 32-bit hardware counters and the driver uses these
counters to monitor the operational progress status for a channel, when
transferring more than 4GB of data it was observed that these counters
overflow and completion calculation of a operation gets affected and the
transfer hangs indefinitely.
This commit adds changes to decrease the byte count for every complete
transaction so that these registers never overflow and the proper byte
count statistics is maintained for ongoing transaction by the RT counters.
Earlier uc->bcnt used to maintain a count of the completed bytes at driver
side, since the RT counters maintain the statistics of current transaction
now, the maintenance of uc->bcnt is not necessary. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: qcom-adm: fix wrong sizeof config in slave_config
Fix broken slave_config function that uncorrectly compare the
peripheral_size with the size of the config pointer instead of the size
of the config struct. This cause the crci value to be ignored and cause
a kernel panic on any slave that use adm driver.
To fix this, compare to the size of the struct and NOT the size of the
pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: OMAP2+: omap4-common: Fix refcount leak bug
In omap4_sram_init(), of_find_compatible_node() will return a node
pointer with refcount incremented. We should use of_node_put() when
it is not used anymore. |
| In the Linux kernel, the following vulnerability has been resolved:
vme: Fix error not catched in fake_init()
In fake_init(), __root_device_register() is possible to fail but it's
ignored, which can cause unregistering vme_root fail when exit.
general protection fault,
probably for non-canonical address 0xdffffc000000008c
KASAN: null-ptr-deref in range [0x0000000000000460-0x0000000000000467]
RIP: 0010:root_device_unregister+0x26/0x60
Call Trace:
<TASK>
__x64_sys_delete_module+0x34f/0x540
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Return error when __root_device_register() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: raspberrypi: fix possible memory leak in rpi_firmware_probe()
In rpi_firmware_probe(), if mbox_request_channel() fails, the 'fw' will
not be freed through rpi_firmware_delete(), fix this leak by calling
kfree() in the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix repeated calls to sock_put() when msg has more_data
In tcp_bpf_send_verdict() redirection, the eval variable is assigned to
__SK_REDIRECT after the apply_bytes data is sent, if msg has more_data,
sock_put() will be called multiple times.
We should reset the eval variable to __SK_NONE every time more_data
starts.
This causes:
IPv4: Attempt to release TCP socket in state 1 00000000b4c925d7
------------[ cut here ]------------
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 5 PID: 4482 at lib/refcount.c:25 refcount_warn_saturate+0x7d/0x110
Modules linked in:
CPU: 5 PID: 4482 Comm: sockhash_bypass Kdump: loaded Not tainted 6.0.0 #1
Hardware name: Red Hat KVM, BIOS 1.11.0-2.el7 04/01/2014
Call Trace:
<TASK>
__tcp_transmit_skb+0xa1b/0xb90
? __alloc_skb+0x8c/0x1a0
? __kmalloc_node_track_caller+0x184/0x320
tcp_write_xmit+0x22a/0x1110
__tcp_push_pending_frames+0x32/0xf0
do_tcp_sendpages+0x62d/0x640
tcp_bpf_push+0xae/0x2c0
tcp_bpf_sendmsg_redir+0x260/0x410
? preempt_count_add+0x70/0xa0
tcp_bpf_send_verdict+0x386/0x4b0
tcp_bpf_sendmsg+0x21b/0x3b0
sock_sendmsg+0x58/0x70
__sys_sendto+0xfa/0x170
? xfd_validate_state+0x1d/0x80
? switch_fpu_return+0x59/0xe0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix potential null-deref in dm_resume
[Why]
Fixing smatch error:
dm_resume() error: we previously assumed 'aconnector->dc_link' could be null
[How]
Check if dc_link null at the beginning of the loop,
so further checks can be dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: Add validation before accessing cgx and lmac
with the addition of new MAC blocks like CN10K RPM and CN10KB
RPM_USX, LMACs are noncontiguous and CGX blocks are also
noncontiguous. But during RVU driver initialization, the driver
is assuming they are contiguous and trying to access
cgx or lmac with their id which is resulting in kernel panic.
This patch fixes the issue by adding proper checks.
[ 23.219150] pc : cgx_lmac_read+0x38/0x70
[ 23.219154] lr : rvu_program_channels+0x3f0/0x498
[ 23.223852] sp : ffff000100d6fc80
[ 23.227158] x29: ffff000100d6fc80 x28: ffff00010009f880 x27:
000000000000005a
[ 23.234288] x26: ffff000102586768 x25: 0000000000002500 x24:
fffffffffff0f000 |
| In the Linux kernel, the following vulnerability has been resolved:
media: amphion: fix REVERSE_INULL issues reported by coverity
null-checking of a pointor is suggested before dereferencing it |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa: Add features attr to vdpa_nl_policy for nlattr length check
The vdpa_nl_policy structure is used to validate the nlattr when parsing
the incoming nlmsg. It will ensure the attribute being described produces
a valid nlattr pointer in info->attrs before entering into each handler
in vdpa_nl_ops.
That is to say, the missing part in vdpa_nl_policy may lead to illegal
nlattr after parsing, which could lead to OOB read just like CVE-2023-3773.
This patch adds the missing nla_policy for vdpa features attr to avoid
such bugs. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: exc3000 - properly stop timer on shutdown
We need to stop the timer on driver unbind or probe failures, otherwise
we get UAF/Oops. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: omapfb: lcd_mipid: Fix an error handling path in mipid_spi_probe()
If 'mipid_detect()' fails, we must free 'md' to avoid a memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
perf trace: Really free the evsel->priv area
In 3cb4d5e00e037c70 ("perf trace: Free syscall tp fields in
evsel->priv") it only was freeing if strcmp(evsel->tp_format->system,
"syscalls") returned zero, while the corresponding initialization of
evsel->priv was being performed if it was _not_ zero, i.e. if the tp
system wasn't 'syscalls'.
Just stop looking for that and free it if evsel->priv was set, which
should be equivalent.
Also use the pre-existing evsel_trace__delete() function.
This resolves these leaks, detected with:
$ make EXTRA_CFLAGS="-fsanitize=address" BUILD_BPF_SKEL=1 CORESIGHT=1 O=/tmp/build/perf-tools-next -C tools/perf install-bin
=================================================================
==481565==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097)
#1 0x987966 in zalloc (/home/acme/bin/perf+0x987966)
#2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307
#3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333
#4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458
#5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480
#6 0x540e8b in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3212
#7 0x540e8b in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891
#8 0x540e8b in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156
#9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323
#10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377
#11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421
#12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537
#13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f)
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097)
#1 0x987966 in zalloc (/home/acme/bin/perf+0x987966)
#2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307
#3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333
#4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458
#5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480
#6 0x540dd1 in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3205
#7 0x540dd1 in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891
#8 0x540dd1 in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156
#9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323
#10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377
#11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421
#12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537
#13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f)
SUMMARY: AddressSanitizer: 80 byte(s) leaked in 2 allocation(s).
[root@quaco ~]#
With this we plug all leaks with "perf trace sleep 1". |
