| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
inotify: fix watch count leak when fsnotify_add_inode_mark_locked() fails
When fsnotify_add_inode_mark_locked() fails in inotify_new_watch(),
the error path calls inotify_remove_from_idr() but does not call
dec_inotify_watches() to undo the preceding inc_inotify_watches().
This leaks a watch count, and repeated failures can exhaust the
max_user_watches limit with -ENOSPC even when no watches are active.
Prior to commit 1cce1eea0aff ("inotify: Convert to using per-namespace
limits"), the watch count was incremented after fsnotify_add_mark_locked()
succeeded, so this path was not affected. The conversion moved
inc_inotify_watches() before the mark insertion without adding the
corresponding rollback.
Add the missing dec_inotify_watches() call in the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: validate damos_quota_goal->nid for node_memcg_{used,free}_bp
Users can set damos_quota_goal->nid with arbitrary value for
node_memcg_{used,free}_bp. But DAMON core is using those for NODE-DATA()
without a validation of the value. This can result in out of bounds
memory access. The issue can actually triggered using DAMON user-space
tool (damo), like below.
$ sudo mkdir /sys/fs/cgroup/foo
$ sudo ./damo start --damos_action stat --damos_quota_interval 1s \
--damos_quota_goal node_memcg_used_bp 50% -1 /foo
$ sudo dmseg
[...]
[ 524.181426] Unable to handle kernel paging request at virtual address 0000000000002c00
Fix this issue by adding the validation of the given node id. If an
invalid node id is given, it returns 0% for used memory ratio, and 100%
for free memory ratio. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix the out-of-bounds nameoff handling for trailing dirents
Currently we already have boundary-checks for nameoffs, but the trailing
dirents are special since the namelens are calculated with strnlen()
with unchecked nameoffs.
If a crafted EROFS has a trailing dirent with nameoff >= maxsize,
maxsize - nameoff can underflow, causing strnlen() to read past the
directory block.
nameoff0 should also be verified to be a multiple of
`sizeof(struct erofs_dirent)` as well [1].
[1] https://sashiko.dev/#/patchset/20260416063511.3173774-1-hsiangkao%40linux.alibaba.com |
| In the Linux kernel, the following vulnerability has been resolved:
spi: fix resource leaks on device setup failure
Make sure to call controller cleanup() if spi_setup() fails while
registering a device to avoid leaking any resources allocated by
setup(). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: control: Validate buf_len before strnlen() in snd_ctl_elem_init_enum_names()
snd_ctl_elem_init_enum_names() advances pointer p through the names
buffer while decrementing buf_len. If buf_len reaches zero but items
remain, the next iteration calls strnlen(p, 0).
While strnlen(p, 0) returns 0 and would hit the existing name_len == 0
error path, CONFIG_FORTIFY_SOURCE's fortified strnlen() first checks
maxlen against __builtin_dynamic_object_size(). When Clang loses track
of p's object size inside the loop, this triggers a BRK exception panic
before the return value is examined.
Add a buf_len == 0 guard at the loop entry to prevent calling fortified
strnlen() on an exhausted buffer.
Found by kernel fuzz testing through Xiaomi Smartphone. |
| In the Linux kernel, the following vulnerability has been resolved:
net: caif: clear client service pointer on teardown
`caif_connect()` can tear down an existing client after remote shutdown by
calling `caif_disconnect_client()` followed by `caif_free_client()`.
`caif_free_client()` releases the service layer referenced by
`adap_layer->dn`, but leaves that pointer stale.
When the socket is later destroyed, `caif_sock_destructor()` calls
`caif_free_client()` again and dereferences the freed service pointer.
Clear the client/service links before releasing the service object so
repeated teardown becomes harmless. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: afs: revert mmap_prepare() change
Partially reverts commit 9d5403b1036c ("fs: convert most other
generic_file_*mmap() users to .mmap_prepare()").
This is because the .mmap invocation establishes a refcount, but
.mmap_prepare is called at a point where a merge or an allocation failure
might happen after the call, which would leak the refcount increment.
Functionality is being added to permit the use of .mmap_prepare in this
case, but in the interim, we need to fix this. |
| Jenkins Credentials Binding Plugin 720.v3f6decef43ea_ and earlier does not properly sanitize file names for file and zip file credentials, allowing attackers able to provide credentials to a job to write files to arbitrary locations on the node filesystem, which can lead to remote code execution if Jenkins is configured to allow a low-privileged user to configure file or zip file credentials used for a job running on the built-in node. |
| Missing Authorization vulnerability in Benbodhi SVG Support allows Exploiting Incorrectly Configured Access Control Security Levels.
This issue affects SVG Support: from n/a through 2.5.14. |
| When creating an export through the pretix API, API clients are
returned an UUID value for their export job (a long, random string like
35742818-c375-4d15-839f-d49aecce94d6). Using this UUID, the API client
can then request the actual file for download. The same kind of UUID is
used in other places in pretix when temporary files are generated for
internal use or download.
One remaining API endpoint, however, wrongfully did not verify if the
UUID used for download actually belongs to a file that is supposed to
be downloadable and belongs to the correct user. In reality, this is
hard to exploit because an attacker would need to have access to a valid
UUID for the file they desire which is unlikely to happen without a
separate security problem giving them access to logs etc. |
| Taipy 4.1.1, fixed in commit 129fd40, contains a path traversal vulnerability in the ElementLibrary.get_resource() method in taipy/gui/extension/library.py that allows unauthenticated attackers to escape the intended module directory by exploiting an incomplete path containment check using str.startswith() without a trailing path separator. Attackers can send crafted GET requests with path traversal segments targeting a prefix-matching sibling directory on disk, bypassing the directory containment check because Flask's path converter and Werkzeug's WSGI layer preserve the traversal segments while the resolved path still satisfies the flawed startswith comparison, enabling unauthorized file access outside the intended library directory. |
| Missing Authorization vulnerability in Prasad Kirpekar WP Meta and Date Remover allows Exploiting Incorrectly Configured Access Control Security Levels.
This issue affects WP Meta and Date Remover: from n/a through 2.3.6. |
| go-git is an extensible git implementation library written in pure Go. Prior to 5.19.0 and 6.0.0-alpha.3, go-git may parse malformed Git objects in a way that differs from upstream Git. When commit or tag objects contain ambiguous or malformed headers, go-git’s decoded representation may expose values differently from how Git itself would interpret or reject the same object. Additionally, go-git’s commit signing and verification logic operates over commit data reconstructed from go-git’s parsed representation rather than the original raw object bytes. As a result, go-git may sign or verify a commit payload that is not byte-for-byte equivalent to the object stored in the repository. This can cause a signature to appear valid for a commit whose displayed or effective metadata differs from the object that was intended to be signed. This vulnerability is fixed in 5.19.0 and 6.0.0-alpha.3. |
| go-git is an extensible git implementation library written in pure Go. Prior to 5.19.1 and 6.0.0-alpha.4, go-git's SSH transport constructs the remote exec command by wrapping the repository path in single quotes without escaping single quotes embedded inside the path. A repository path containing a single quote can therefore break out of the quoted region in the exec command and be appended as additional shell tokens. This vulnerability is fixed in 5.19.1 and 6.0.0-alpha.4. |
| A flaw was found in Keycloak. A remote, unauthenticated attacker can exploit this vulnerability by sending specially crafted SOAP requests to the SAML ECP (Security Assertion Markup Language Enhanced Client or Proxy) endpoint with varying client IDs. By observing distinct faultstrings in the responses, the attacker can determine the client's protocol type, leading to information disclosure. |
| A flaw was found in Keycloak's Client Policies, specifically within the `org.keycloak.protocol.oidc` component. When certain condition providers (client-type, client-roles, client-attributes, client-scopes) are used to enforce security restrictions, the `reject-ropc-grant` executor is silently bypassed. This allows an unauthenticated remote attacker to obtain tokens via a Resource Owner Password Credentials (ROPC) grant, even when a policy is explicitly configured to block it. This bypass can lead to unauthorized access and information disclosure. |
| A flaw was found in Keycloak. When a JSON Web Encryption (JWE) encrypted request object is submitted, Keycloak may incorrectly process unsigned claims if the decrypted content is raw JSON, bypassing the configured signature policy. This allows a remote attacker to submit unauthorized claims, leading to a compromise of data integrity within the OpenID Connect (OIDC) authorization flow. While a redirect URI allowlist acts as a compensating control, this vulnerability violates OIDC Core and Financial-grade API (FAPI) signing requirements. |
| A flaw was found in Keycloak. An authenticated user with existing organization membership can exploit this flaw by accessing user-facing APIs, such as the account API or by requesting an OpenID Connect (OIDC) token with the 'organization' scope. This allows organization metadata to be disclosed in tokens, even after an administrator has explicitly disabled the Organizations feature, potentially leading to incorrect authorization decisions by resource servers. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: fix usb_dev refcount leak on probe failure
create_card() takes a reference on the USB device with usb_get_dev()
and stores the matching usb_put_dev() in card_free(), which is
installed as the snd_card's ->private_free destructor.
However, ->private_free is only assigned near the end of init_card(),
after several failure points (usb_set_interface(), EP type checks,
usb_submit_urb(), the EP1_CMD_GET_DEVICE_INFO exchange, and its
timeout). When any of those fail, init_card() returns an error to
snd_probe(), which calls snd_card_free(card). Because ->private_free
is still NULL, card_free() never runs, the usb_get_dev() reference
is not dropped, and the struct usb_device leaks along with its
descriptor allocations and device_private.
syzbot reproduces this with a malformed UAC3 device whose only valid
altsetting is 0; init_card()'s usb_set_interface(usb_dev, 0, 1) call
fails with -EIO and triggers the leak.
Move the ->private_free assignment into create_card(), immediately
after usb_get_dev(), so that every error path reaching snd_card_free()
balances the reference. card_free()'s callees (snd_usb_caiaq_input_free,
free_urbs, kfree) already tolerate the partially-initialized state
because the chip private area is zero-initialized by snd_card_new(). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ctxfi: Add fallback to default RSR for S/PDIF
spdif_passthru_playback_get_resources() uses atc->pll_rate as the RSR
for the MSR calculation loop. However, pll_rate is only updated in
atc_pll_init() and not in hw_pll_init(), so it remains 0 after the
card init.
When spdif_passthru_playback_setup() skips atc_pll_init() for
32000 Hz, (rsr * desc.msr) always becomes 0, causing the loop to spin
indefinitely.
Add fallback to use atc->rsr when atc->pll_rate is 0. This reflects
the hardware state, since hw_card_init() already configures the PLL
to the default RSR. |
