| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A denial of service is possible from excessive resource consumption in net/http and mime/multipart. Multipart form parsing with mime/multipart.Reader.ReadForm can consume largely unlimited amounts of memory and disk files. This also affects form parsing in the net/http package with the Request methods FormFile, FormValue, ParseMultipartForm, and PostFormValue. ReadForm takes a maxMemory parameter, and is documented as storing "up to maxMemory bytes +10MB (reserved for non-file parts) in memory". File parts which cannot be stored in memory are stored on disk in temporary files. The unconfigurable 10MB reserved for non-file parts is excessively large and can potentially open a denial of service vector on its own. However, ReadForm did not properly account for all memory consumed by a parsed form, such as map entry overhead, part names, and MIME headers, permitting a maliciously crafted form to consume well over 10MB. In addition, ReadForm contained no limit on the number of disk files created, permitting a relatively small request body to create a large number of disk temporary files. With fix, ReadForm now properly accounts for various forms of memory overhead, and should now stay within its documented limit of 10MB + maxMemory bytes of memory consumption. Users should still be aware that this limit is high and may still be hazardous. In addition, ReadForm now creates at most one on-disk temporary file, combining multiple form parts into a single temporary file. The mime/multipart.File interface type's documentation states, "If stored on disk, the File's underlying concrete type will be an *os.File.". This is no longer the case when a form contains more than one file part, due to this coalescing of parts into a single file. The previous behavior of using distinct files for each form part may be reenabled with the environment variable GODEBUG=multipartfiles=distinct. Users should be aware that multipart.ReadForm and the http.Request methods that call it do not limit the amount of disk consumed by temporary files. Callers can limit the size of form data with http.MaxBytesReader. |
| Large handshake records may cause panics in crypto/tls. Both clients and servers may send large TLS handshake records which cause servers and clients, respectively, to panic when attempting to construct responses. This affects all TLS 1.3 clients, TLS 1.2 clients which explicitly enable session resumption (by setting Config.ClientSessionCache to a non-nil value), and TLS 1.3 servers which request client certificates (by setting Config.ClientAuth >= RequestClientCert). |
| HashiCorp Vault and Vault Enterprise’s approle auth method allowed any authenticated user with access to an approle destroy endpoint to destroy the secret ID of any other role by providing the secret ID accessor. This vulnerability is fixed in Vault 1.13.0, 1.12.4, 1.11.8, 1.10.11 and above. |
| Go JOSE provides an implementation of the Javascript Object Signing and Encryption set of standards in Go, including support for JSON Web Encryption (JWE), JSON Web Signature (JWS), and JSON Web Token (JWT) standards. In versions on the 4.x branch prior to version 4.0.5, when parsing compact JWS or JWE input, Go JOSE could use excessive memory. The code used strings.Split(token, ".") to split JWT tokens, which is vulnerable to excessive memory consumption when processing maliciously crafted tokens with a large number of `.` characters. An attacker could exploit this by sending numerous malformed tokens, leading to memory exhaustion and a Denial of Service. Version 4.0.5 fixes this issue. As a workaround, applications could pre-validate that payloads passed to Go JOSE do not contain an excessive number of `.` characters. |
| An attacker can craft an input to the Parse functions that would be processed non-linearly with respect to its length, resulting in extremely slow parsing. This could cause a denial of service. |
| Applications and libraries which misuse connection.serverAuthenticate (via callback field ServerConfig.PublicKeyCallback) may be susceptible to an authorization bypass. The documentation for ServerConfig.PublicKeyCallback says that "A call to this function does not guarantee that the key offered is in fact used to authenticate." Specifically, the SSH protocol allows clients to inquire about whether a public key is acceptable before proving control of the corresponding private key. PublicKeyCallback may be called with multiple keys, and the order in which the keys were provided cannot be used to infer which key the client successfully authenticated with, if any. Some applications, which store the key(s) passed to PublicKeyCallback (or derived information) and make security relevant determinations based on it once the connection is established, may make incorrect assumptions. For example, an attacker may send public keys A and B, and then authenticate with A. PublicKeyCallback would be called only twice, first with A and then with B. A vulnerable application may then make authorization decisions based on key B for which the attacker does not actually control the private key. Since this API is widely misused, as a partial mitigation golang.org/x/cry...@v0.31.0 enforces the property that, when successfully authenticating via public key, the last key passed to ServerConfig.PublicKeyCallback will be the key used to authenticate the connection. PublicKeyCallback will now be called multiple times with the same key, if necessary. Note that the client may still not control the last key passed to PublicKeyCallback if the connection is then authenticated with a different method, such as PasswordCallback, KeyboardInteractiveCallback, or NoClientAuth. Users should be using the Extensions field of the Permissions return value from the various authentication callbacks to record data associated with the authentication attempt instead of referencing external state. Once the connection is established the state corresponding to the successful authentication attempt can be retrieved via the ServerConn.Permissions field. Note that some third-party libraries misuse the Permissions type by sharing it across authentication attempts; users of third-party libraries should refer to the relevant projects for guidance. |
| The various Is methods (IsPrivate, IsLoopback, etc) did not work as expected for IPv4-mapped IPv6 addresses, returning false for addresses which would return true in their traditional IPv4 forms. |
| The archive/zip package's handling of certain types of invalid zip files differs from the behavior of most zip implementations. This misalignment could be exploited to create an zip file with contents that vary depending on the implementation reading the file. The archive/zip package now rejects files containing these errors. |
| A malformed DNS message in response to a query can cause the Lookup functions to get stuck in an infinite loop. |
| The protojson.Unmarshal function can enter an infinite loop when unmarshaling certain forms of invalid JSON. This condition can occur when unmarshaling into a message which contains a google.protobuf.Any value, or when the UnmarshalOptions.DiscardUnknown option is set. |
| Verifying a certificate chain which contains a certificate with an unknown public key algorithm will cause Certificate.Verify to panic. This affects all crypto/tls clients, and servers that set Config.ClientAuth to VerifyClientCertIfGiven or RequireAndVerifyClientCert. The default behavior is for TLS servers to not verify client certificates. |
| HashiCorp Vault and Vault Enterprise inbound client requests triggering a policy check can lead to an unbounded consumption of memory. A large number of these requests may lead to denial-of-service. Fixed in Vault 1.15.2, 1.14.6, and 1.13.10. |
| A security issue was discovered in Kubernetes where a large number of container checkpoint requests made to the unauthenticated kubelet read-only HTTP endpoint may cause a Node Denial of Service by filling the Node's disk. |
| All versions of the package word-wrap are vulnerable to Regular Expression Denial of Service (ReDoS) due to the usage of an insecure regular expression within the result variable. |
| A security issue was discovered in kube-apiserver that allows an
aggregated API server to redirect client traffic to any URL. This could
lead to the client performing unexpected actions as well as forwarding
the client's API server credentials to third parties. |
| In versions `<=8.5.1` of `jsonwebtoken` library, lack of algorithm definition in the `jwt.verify()` function can lead to signature validation bypass due to defaulting to the `none` algorithm for signature verification. Users are affected if you do not specify algorithms in the `jwt.verify()` function. This issue has been fixed, please update to version 9.0.0 which removes the default support for the none algorithm in the `jwt.verify()` method. There will be no impact, if you update to version 9.0.0 and you don’t need to allow for the `none` algorithm. If you need 'none' algorithm, you have to explicitly specify that in `jwt.verify()` options. |
| A malicious HTTP/2 client which rapidly creates requests and immediately resets them can cause excessive server resource consumption. While the total number of requests is bounded by the http2.Server.MaxConcurrentStreams setting, resetting an in-progress request allows the attacker to create a new request while the existing one is still executing. With the fix applied, HTTP/2 servers now bound the number of simultaneously executing handler goroutines to the stream concurrency limit (MaxConcurrentStreams). New requests arriving when at the limit (which can only happen after the client has reset an existing, in-flight request) will be queued until a handler exits. If the request queue grows too large, the server will terminate the connection. This issue is also fixed in golang.org/x/net/http2 for users manually configuring HTTP/2. The default stream concurrency limit is 250 streams (requests) per HTTP/2 connection. This value may be adjusted using the golang.org/x/net/http2 package; see the Server.MaxConcurrentStreams setting and the ConfigureServer function. |
| QUIC connections do not set an upper bound on the amount of data buffered when reading post-handshake messages, allowing a malicious QUIC connection to cause unbounded memory growth. With fix, connections now consistently reject messages larger than 65KiB in size. |
| Processing an incomplete post-handshake message for a QUIC connection can cause a panic. |
| The html/template package does not apply the proper rules for handling occurrences of "<script", "<!--", and "</script" within JS literals in <script> contexts. This may cause the template parser to improperly consider script contexts to be terminated early, causing actions to be improperly escaped. This could be leveraged to perform an XSS attack. |
