| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: t7xx: fix potential skb->frags overflow in RX path
When receiving data in the DPMAIF RX path,
the t7xx_dpmaif_set_frag_to_skb() function adds
page fragments to an skb without checking if the number of
fragments has exceeded MAX_SKB_FRAGS. This could lead to a buffer overflow
in skb_shinfo(skb)->frags[] array, corrupting adjacent memory and
potentially causing kernel crashes or other undefined behavior.
This issue was identified through static code analysis by comparing with a
similar vulnerability fixed in the mt76 driver commit b102f0c522cf ("mt76:
fix array overflow on receiving too many fragments for a packet").
The vulnerability could be triggered if the modem firmware sends packets
with excessive fragments. While under normal protocol conditions (MTU 3080
bytes, BAT buffer 3584 bytes),
a single packet should not require additional
fragments, the kernel should not blindly trust firmware behavior.
Malicious, buggy, or compromised firmware could potentially craft packets
with more fragments than the kernel expects.
Fix this by adding a bounds check before calling skb_add_rx_frag() to
ensure nr_frags does not exceed MAX_SKB_FRAGS.
The check must be performed before unmapping to avoid a page leak
and double DMA unmap during device teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix race in mptcp_pm_nl_flush_addrs_doit()
syzbot and Eulgyu Kim reported crashes in mptcp_pm_nl_get_local_id()
and/or mptcp_pm_nl_is_backup()
Root cause is list_splice_init() in mptcp_pm_nl_flush_addrs_doit()
which is not RCU ready.
list_splice_init_rcu() can not be called here while holding pernet->lock
spinlock.
Many thanks to Eulgyu Kim for providing a repro and testing our patches. |
| Known is a social publishing platform. Prior to 1.6.3, a Critical Broken Authentication vulnerability exists in Known 1.6.2 and earlier. The application leaks the password reset token within a hidden HTML input field on the password reset page. This allows any unauthenticated attacker to retrieve the reset token for any user by simply querying the user's email, leading to full Account Takeover (ATO) without requiring access to the victim's email inbox. This vulnerability is fixed in 1.6.3. |
| Versions of the package directorytree/imapengine before 1.22.3 are vulnerable to Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection') via the id() function in ImapConnection.php due to improperly escaping user input before including it in IMAP ID commands. This allows attackers to read or delete victim's emails, terminate the victim's session or execute any valid IMAP command on victim's mailbox by including quote characters " or CRLF sequences \r\n in the input. |
| Caido is a web security auditing toolkit. Prior to 0.55.0, Caido blocks non whitelisted domains to reach out through the 8080 port, and shows Host/IP is not allowed to connect to Caido on all endpoints. But this is bypassable by injecting a X-Forwarded-Host: 127.0.0.1:8080 header. This vulnerability is fixed in 0.55.0. |
| The Geo Widget plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the URL path in all versions up to, and including, 1.0 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Sphere Manager plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'width' parameter in the 'show_sphere_image' shortcode in all versions up to, and including, 1.0.2 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Super Simple Contact Form plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'sscf_name' parameter in all versions up to, and including, 1.6.2 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| The midi-Synth plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type and file extension validation in the 'export' AJAX action in all versions up to, and including, 1.1.0. This makes it possible for unauthenticated attackers to upload arbitrary files on the affected site's server which may make remote code execution possible granted the attacker can obtain a valid nonce. The nonce is exposed in frontend JavaScript making it trivially accessible to unauthenticated attackers. |
| The PhotoStack Gallery plugin for WordPress is vulnerable to SQL Injection via the 'postid' parameter in all versions up to, and including, 0.4.1 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| The Super Page Cache plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the Activity Log in all versions up to, and including, 5.2.2 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/io-wq: check IO_WQ_BIT_EXIT inside work run loop
Currently this is checked before running the pending work. Normally this
is quite fine, as work items either end up blocking (which will create a
new worker for other items), or they complete fairly quickly. But syzbot
reports an issue where io-wq takes seemingly forever to exit, and with a
bit of debugging, this turns out to be because it queues a bunch of big
(2GB - 4096b) reads with a /dev/msr* file. Since this file type doesn't
support ->read_iter(), loop_rw_iter() ends up handling them. Each read
returns 16MB of data read, which takes 20 (!!) seconds. With a bunch of
these pending, processing the whole chain can take a long time. Easily
longer than the syzbot uninterruptible sleep timeout of 140 seconds.
This then triggers a complaint off the io-wq exit path:
INFO: task syz.4.135:6326 blocked for more than 143 seconds.
Not tainted syzkaller #0
Blocked by coredump.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz.4.135 state:D stack:26824 pid:6326 tgid:6324 ppid:5957 task_flags:0x400548 flags:0x00080000
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5256 [inline]
__schedule+0x1139/0x6150 kernel/sched/core.c:6863
__schedule_loop kernel/sched/core.c:6945 [inline]
schedule+0xe7/0x3a0 kernel/sched/core.c:6960
schedule_timeout+0x257/0x290 kernel/time/sleep_timeout.c:75
do_wait_for_common kernel/sched/completion.c:100 [inline]
__wait_for_common+0x2fc/0x4e0 kernel/sched/completion.c:121
io_wq_exit_workers io_uring/io-wq.c:1328 [inline]
io_wq_put_and_exit+0x271/0x8a0 io_uring/io-wq.c:1356
io_uring_clean_tctx+0x10d/0x190 io_uring/tctx.c:203
io_uring_cancel_generic+0x69c/0x9a0 io_uring/cancel.c:651
io_uring_files_cancel include/linux/io_uring.h:19 [inline]
do_exit+0x2ce/0x2bd0 kernel/exit.c:911
do_group_exit+0xd3/0x2a0 kernel/exit.c:1112
get_signal+0x2671/0x26d0 kernel/signal.c:3034
arch_do_signal_or_restart+0x8f/0x7e0 arch/x86/kernel/signal.c:337
__exit_to_user_mode_loop kernel/entry/common.c:41 [inline]
exit_to_user_mode_loop+0x8c/0x540 kernel/entry/common.c:75
__exit_to_user_mode_prepare include/linux/irq-entry-common.h:226 [inline]
syscall_exit_to_user_mode_prepare include/linux/irq-entry-common.h:256 [inline]
syscall_exit_to_user_mode_work include/linux/entry-common.h:159 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:194 [inline]
do_syscall_64+0x4ee/0xf80 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fa02738f749
RSP: 002b:00007fa0281ae0e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: fffffffffffffe00 RBX: 00007fa0275e6098 RCX: 00007fa02738f749
RDX: 0000000000000000 RSI: 0000000000000080 RDI: 00007fa0275e6098
RBP: 00007fa0275e6090 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fa0275e6128 R14: 00007fff14e4fcb0 R15: 00007fff14e4fd98
There's really nothing wrong here, outside of processing these reads
will take a LONG time. However, we can speed up the exit by checking the
IO_WQ_BIT_EXIT inside the io_worker_handle_work() loop, as syzbot will
exit the ring after queueing up all of these reads. Then once the first
item is processed, io-wq will simply cancel the rest. That should avoid
syzbot running into this complaint again. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix early read unlock of page with EOF in middle
The read result collection for buffered reads seems to run ahead of the
completion of subrequests under some circumstances, as can be seen in the
following log snippet:
9p_client_res: client 18446612686390831168 response P9_TREAD tag 0 err 0
...
netfs_sreq: R=00001b55[1] DOWN TERM f=192 s=0 5fb2/5fb2 s=5 e=0
...
netfs_collect_folio: R=00001b55 ix=00004 r=4000-5000 t=4000/5fb2
netfs_folio: i=157f3 ix=00004-00004 read-done
netfs_folio: i=157f3 ix=00004-00004 read-unlock
netfs_collect_folio: R=00001b55 ix=00005 r=5000-5fb2 t=5000/5fb2
netfs_folio: i=157f3 ix=00005-00005 read-done
netfs_folio: i=157f3 ix=00005-00005 read-unlock
...
netfs_collect_stream: R=00001b55[0:] cto=5fb2 frn=ffffffff
netfs_collect_state: R=00001b55 col=5fb2 cln=6000 n=c
netfs_collect_stream: R=00001b55[0:] cto=5fb2 frn=ffffffff
netfs_collect_state: R=00001b55 col=5fb2 cln=6000 n=8
...
netfs_sreq: R=00001b55[2] ZERO SUBMT f=000 s=5fb2 0/4e s=0 e=0
netfs_sreq: R=00001b55[2] ZERO TERM f=102 s=5fb2 4e/4e s=5 e=0
The 'cto=5fb2' indicates the collected file pos we've collected results to
so far - but we still have 0x4e more bytes to go - so we shouldn't have
collected folio ix=00005 yet. The 'ZERO' subreq that clears the tail
happens after we unlock the folio, allowing the application to see the
uncleared tail through mmap.
The problem is that netfs_read_unlock_folios() will unlock a folio in which
the amount of read results collected hits EOF position - but the ZERO
subreq lies beyond that and so happens after.
Fix this by changing the end check to always be the end of the folio and
never the end of the file.
In the future, I should look at clearing to the end of the folio here rather
than adding a ZERO subreq to do this. On the other hand, the ZERO subreq can
run in parallel with an async READ subreq. Further, the ZERO subreq may still
be necessary to, say, handle extents in a ceph file that don't have any
backing store and are thus implicitly all zeros.
This can be reproduced by creating a file, the size of which doesn't align
to a page boundary, e.g. 24998 (0x5fb2) bytes and then doing something
like:
xfs_io -c "mmap -r 0 0x6000" -c "madvise -d 0 0x6000" \
-c "mread -v 0 0x6000" /xfstest.test/x
The last 0x4e bytes should all be 00, but if the tail hasn't been cleared
yet, you may see rubbish there. This can be reproduced with kafs by
modifying the kernel to disable the call to netfs_read_subreq_progress()
and to stop afs_issue_read() from doing the async call for NETFS_READAHEAD.
Reproduction can be made easier by inserting an mdelay(100) in
netfs_issue_read() for the ZERO-subreq case.
AFS and CIFS are normally unlikely to show this as they dispatch READ ops
asynchronously, which allows the ZERO-subreq to finish first. 9P's READ op is
completely synchronous, so the ZERO-subreq will always happen after. It isn't
seen all the time, though, because the collection may be done in a worker
thread. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: Fix memleak in nfc_llcp_send_ui_frame().
syzbot reported various memory leaks related to NFC, struct
nfc_llcp_sock, sk_buff, nfc_dev, etc. [0]
The leading log hinted that nfc_llcp_send_ui_frame() failed
to allocate skb due to sock_error(sk) being -ENXIO.
ENXIO is set by nfc_llcp_socket_release() when struct
nfc_llcp_local is destroyed by local_cleanup().
The problem is that there is no synchronisation between
nfc_llcp_send_ui_frame() and local_cleanup(), and skb
could be put into local->tx_queue after it was purged in
local_cleanup():
CPU1 CPU2
---- ----
nfc_llcp_send_ui_frame() local_cleanup()
|- do { '
|- pdu = nfc_alloc_send_skb(..., &err)
| .
| |- nfc_llcp_socket_release(local, false, ENXIO);
| |- skb_queue_purge(&local->tx_queue); |
| ' |
|- skb_queue_tail(&local->tx_queue, pdu); |
... |
|- pdu = nfc_alloc_send_skb(..., &err) |
^._________________________________.'
local_cleanup() is called for struct nfc_llcp_local only
after nfc_llcp_remove_local() unlinks it from llcp_devices.
If we hold local->tx_queue.lock then, we can synchronise
the thread and nfc_llcp_send_ui_frame().
Let's do that and check list_empty(&local->list) before
queuing skb to local->tx_queue in nfc_llcp_send_ui_frame().
[0]:
[ 56.074943][ T6096] llcp: nfc_llcp_send_ui_frame: Could not allocate PDU (error=-6)
[ 64.318868][ T5813] kmemleak: 6 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
BUG: memory leak
unreferenced object 0xffff8881272f6800 (size 1024):
comm "syz.0.17", pid 6096, jiffies 4294942766
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
27 00 03 40 00 00 00 00 00 00 00 00 00 00 00 00 '..@............
backtrace (crc da58d84d):
kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline]
slab_post_alloc_hook mm/slub.c:4979 [inline]
slab_alloc_node mm/slub.c:5284 [inline]
__do_kmalloc_node mm/slub.c:5645 [inline]
__kmalloc_noprof+0x3e3/0x6b0 mm/slub.c:5658
kmalloc_noprof include/linux/slab.h:961 [inline]
sk_prot_alloc+0x11a/0x1b0 net/core/sock.c:2239
sk_alloc+0x36/0x360 net/core/sock.c:2295
nfc_llcp_sock_alloc+0x37/0x130 net/nfc/llcp_sock.c:979
llcp_sock_create+0x71/0xd0 net/nfc/llcp_sock.c:1044
nfc_sock_create+0xc9/0xf0 net/nfc/af_nfc.c:31
__sock_create+0x1a9/0x340 net/socket.c:1605
sock_create net/socket.c:1663 [inline]
__sys_socket_create net/socket.c:1700 [inline]
__sys_socket+0xb9/0x1a0 net/socket.c:1747
__do_sys_socket net/socket.c:1761 [inline]
__se_sys_socket net/socket.c:1759 [inline]
__x64_sys_socket+0x1b/0x30 net/socket.c:1759
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xa4/0xfa0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
BUG: memory leak
unreferenced object 0xffff88810fbd9800 (size 240):
comm "syz.0.17", pid 6096, jiffies 4294942850
hex dump (first 32 bytes):
68 f0 ff 08 81 88 ff ff 68 f0 ff 08 81 88 ff ff h.......h.......
00 00 00 00 00 00 00 00 00 68 2f 27 81 88 ff ff .........h/'....
backtrace (crc 6cc652b1):
kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline]
slab_post_alloc_hook mm/slub.c:4979 [inline]
slab_alloc_node mm/slub.c:5284 [inline]
kmem_cache_alloc_node_noprof+0x36f/0x5e0 mm/slub.c:5336
__alloc_skb+0x203/0x240 net/core/skbuff.c:660
alloc_skb include/linux/skbuff.h:1383 [inline]
alloc_skb_with_frags+0x69/0x3f0 net/core/sk
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not strictly require dirty metadata threshold for metadata writepages
[BUG]
There is an internal report that over 1000 processes are
waiting at the io_schedule_timeout() of balance_dirty_pages(), causing
a system hang and trigger a kernel coredump.
The kernel is v6.4 kernel based, but the root problem still applies to
any upstream kernel before v6.18.
[CAUSE]
From Jan Kara for his wisdom on the dirty page balance behavior first.
This cgroup dirty limit was what was actually playing the role here
because the cgroup had only a small amount of memory and so the dirty
limit for it was something like 16MB.
Dirty throttling is responsible for enforcing that nobody can dirty
(significantly) more dirty memory than there's dirty limit. Thus when
a task is dirtying pages it periodically enters into balance_dirty_pages()
and we let it sleep there to slow down the dirtying.
When the system is over dirty limit already (either globally or within
a cgroup of the running task), we will not let the task exit from
balance_dirty_pages() until the number of dirty pages drops below the
limit.
So in this particular case, as I already mentioned, there was a cgroup
with relatively small amount of memory and as a result with dirty limit
set at 16MB. A task from that cgroup has dirtied about 28MB worth of
pages in btrfs btree inode and these were practically the only dirty
pages in that cgroup.
So that means the only way to reduce the dirty pages of that cgroup is
to writeback the dirty pages of btrfs btree inode, and only after that
those processes can exit balance_dirty_pages().
Now back to the btrfs part, btree_writepages() is responsible for
writing back dirty btree inode pages.
The problem here is, there is a btrfs internal threshold that if the
btree inode's dirty bytes are below the 32M threshold, it will not
do any writeback.
This behavior is to batch as much metadata as possible so we won't write
back those tree blocks and then later re-COW them again for another
modification.
This internal 32MiB is higher than the existing dirty page size (28MiB),
meaning no writeback will happen, causing a deadlock between btrfs and
cgroup:
- Btrfs doesn't want to write back btree inode until more dirty pages
- Cgroup/MM doesn't want more dirty pages for btrfs btree inode
Thus any process touching that btree inode is put into sleep until
the number of dirty pages is reduced.
Thanks Jan Kara a lot for the analysis of the root cause.
[ENHANCEMENT]
Since kernel commit b55102826d7d ("btrfs: set AS_KERNEL_FILE on the
btree_inode"), btrfs btree inode pages will only be charged to the root
cgroup which should have a much larger limit than btrfs' 32MiB
threshold.
So it should not affect newer kernels.
But for all current LTS kernels, they are all affected by this problem,
and backporting the whole AS_KERNEL_FILE may not be a good idea.
Even for newer kernels I still think it's a good idea to get
rid of the internal threshold at btree_writepages(), since for most cases
cgroup/MM has a better view of full system memory usage than btrfs' fixed
threshold.
For internal callers using btrfs_btree_balance_dirty() since that
function is already doing internal threshold check, we don't need to
bother them.
But for external callers of btree_writepages(), just respect their
requests and write back whatever they want, ignoring the internal
btrfs threshold to avoid such deadlock on btree inode dirty page
balancing. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imx/tve: fix probe device leak
Make sure to drop the reference taken to the DDC device during probe on
probe failure (e.g. probe deferral) and on driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: fix use-after-free due to enslave fail after slave array update
Fix a use-after-free which happens due to enslave failure after the new
slave has been added to the array. Since the new slave can be used for Tx
immediately, we can use it after it has been freed by the enslave error
cleanup path which frees the allocated slave memory. Slave update array is
supposed to be called last when further enslave failures are not expected.
Move it after xdp setup to avoid any problems.
It is very easy to reproduce the problem with a simple xdp_pass prog:
ip l add bond1 type bond mode balance-xor
ip l set bond1 up
ip l set dev bond1 xdp object xdp_pass.o sec xdp_pass
ip l add dumdum type dummy
Then run in parallel:
while :; do ip l set dumdum master bond1 1>/dev/null 2>&1; done;
mausezahn bond1 -a own -b rand -A rand -B 1.1.1.1 -c 0 -t tcp "dp=1-1023, flags=syn"
The crash happens almost immediately:
[ 605.602850] Oops: general protection fault, probably for non-canonical address 0xe0e6fc2460000137: 0000 [#1] SMP KASAN NOPTI
[ 605.602916] KASAN: maybe wild-memory-access in range [0x07380123000009b8-0x07380123000009bf]
[ 605.602946] CPU: 0 UID: 0 PID: 2445 Comm: mausezahn Kdump: loaded Tainted: G B 6.19.0-rc6+ #21 PREEMPT(voluntary)
[ 605.602979] Tainted: [B]=BAD_PAGE
[ 605.602998] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 605.603032] RIP: 0010:netdev_core_pick_tx+0xcd/0x210
[ 605.603063] Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 3e 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 6b 08 49 8d 7d 30 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 25 01 00 00 49 8b 45 30 4c 89 e2 48 89 ee 48 89
[ 605.603111] RSP: 0018:ffff88817b9af348 EFLAGS: 00010213
[ 605.603145] RAX: dffffc0000000000 RBX: ffff88817d28b420 RCX: 0000000000000000
[ 605.603172] RDX: 00e7002460000137 RSI: 0000000000000008 RDI: 07380123000009be
[ 605.603199] RBP: ffff88817b541a00 R08: 0000000000000001 R09: fffffbfff3ed8c0c
[ 605.603226] R10: ffffffff9f6c6067 R11: 0000000000000001 R12: 0000000000000000
[ 605.603253] R13: 073801230000098e R14: ffff88817d28b448 R15: ffff88817b541a84
[ 605.603286] FS: 00007f6570ef67c0(0000) GS:ffff888221dfa000(0000) knlGS:0000000000000000
[ 605.603319] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 605.603343] CR2: 00007f65712fae40 CR3: 000000011371b000 CR4: 0000000000350ef0
[ 605.603373] Call Trace:
[ 605.603392] <TASK>
[ 605.603410] __dev_queue_xmit+0x448/0x32a0
[ 605.603434] ? __pfx_vprintk_emit+0x10/0x10
[ 605.603461] ? __pfx_vprintk_emit+0x10/0x10
[ 605.603484] ? __pfx___dev_queue_xmit+0x10/0x10
[ 605.603507] ? bond_start_xmit+0xbfb/0xc20 [bonding]
[ 605.603546] ? _printk+0xcb/0x100
[ 605.603566] ? __pfx__printk+0x10/0x10
[ 605.603589] ? bond_start_xmit+0xbfb/0xc20 [bonding]
[ 605.603627] ? add_taint+0x5e/0x70
[ 605.603648] ? add_taint+0x2a/0x70
[ 605.603670] ? end_report.cold+0x51/0x75
[ 605.603693] ? bond_start_xmit+0xbfb/0xc20 [bonding]
[ 605.603731] bond_start_xmit+0x623/0xc20 [bonding] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix memory leak in set_ssp_complete
Fix memory leak in set_ssp_complete() where mgmt_pending_cmd structures
are not freed after being removed from the pending list.
Commit 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs") replaced
mgmt_pending_foreach() calls with individual command handling but missed
adding mgmt_pending_free() calls in both error and success paths of
set_ssp_complete(). Other completion functions like set_le_complete()
were fixed correctly in the same commit.
This causes a memory leak of the mgmt_pending_cmd structure and its
associated parameter data for each SSP command that completes.
Add the missing mgmt_pending_free(cmd) calls in both code paths to fix
the memory leak. Also fix the same issue in set_advertising_complete(). |
| In the Linux kernel, the following vulnerability has been resolved:
sfc: fix deadlock in RSS config read
Since cited commit, core locks the net_device's rss_lock when handling
ethtool -x command, so driver's implementation should not lock it
again. Remove the latter. |
| The StickEasy Protected Contact Form plugin for WordPress is vulnerable to Sensitive Information Disclosure in all versions up to, and including, 1.0.2. The plugin stores spam detection logs at a predictable publicly accessible location (wp-content/uploads/stickeasy-protected-contact-form/spcf-log.txt). This makes it possible for unauthenticated attackers to download the log file and access sensitive information including visitor IP addresses, email addresses, and comment snippets from contact form submissions that were flagged as spam. |
