| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix FDP fdpcidx bounds check
The fdpcidx bounds check sets n = NUMFDPC + 1 but used > instead of >=,
incorrectly accepting fdp_idx when it equals n (i.e. NUMFDPC + 1). |
| In the Linux kernel, the following vulnerability has been resolved:
evm: terminate and bound the evm_xattrs read buffer
evm_read_xattrs() allocates size + 1 bytes, fills them from the list of
enabled xattrs, and then passes strlen(temp) to
simple_read_from_buffer(). When no configured xattrs are enabled, the
fill loop stores nothing and temp[0] remains uninitialized, so strlen()
reads beyond initialized memory.
Explicitly terminate the buffer after allocation, use snprintf() for
each formatted line, and pass the accumulated length, without risk of
truncation, to simple_read_from_buffer(). |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Adjust size for copy_to_user()
The amount of data returned to user space should be limited by the buffer
size provided by the application. If the buffer is smaller than the data
size, return only the portion that fits instead of failing. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: add bounds check on firmware mac_id in link lookup
The mac_id field in RX descriptors is 8 bits wide (0-255), but
assoc_link_on_macid[] has only RTW89_MAX_MAC_ID_NUM (128) entries.
While the driver currently assigns mac_id values below 128, the
descriptor value comes from firmware and is not validated before use
as an array index. Add a defensive bounds check in
rtw89_assoc_link_rcu_dereference() to guard against out-of-range
firmware values. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: fix OOB read from firmware RX descriptor exceeding DMA buffer
In rtw_pci_rx_napi(), new_len is computed as the sum of pkt_len (14-bit
descriptor field, max 16383) and pkt_offset (drv_info_sz + shift, both
firmware-controlled). The result can exceed RTK_PCI_RX_BUF_SIZE (11478),
causing an out-of-bounds read from the pre-allocated DMA buffer when
skb_put_data copies new_len bytes. The USB transport already validates
this (rtw_usb_rx_data_put checks against RTW_USB_MAX_RECVBUF_SZ); the
PCIe path does not.
Add a check that new_len does not exceed the DMA buffer size. |
| GNU Emacs before 31.0.91 contains an integer overflow in the PBM/PPM/PGM image loader that allows an attacker to leak heap memory contents by supplying a crafted image with large dimensions and an elevated max color index. The image loader multiplies image dimensions and channel count using signed integer arithmetic; for sufficiently large values, the result wraps to a negative number, bypassing the bounds check and causing the pixel reader to access heap memory past the end of the allocated buffer. The over-read contents are interpreted as pixel color values and rendered on screen. |
| Missing queue-set type validation in xQueueAddToSet() in the FreeRTOS-Kernel before 11.3.1 might allow an unprivileged task on MPU-enabled ports with configUSE_QUEUE_SETS=1 to read privileged kernel memory. To remediate this issue, users should upgrade to version 11.3.1 or later. |
| libheif is a HEIF and AVIF file format decoder and encoder. From 1.19.0 until 1.23.1, a crafted uncompressed HEIF image using generic zlib unci full-item compression can crash an application that decodes an advertised tile with heif_image_handle_decode_image_tile(). In libheif/codecs/uncompressed/unc_decoder.cc, unc_decoder::fetch_tile_data() computes a large tile offset and unc_decoder::get_compressed_image_data_uncompressed() validates it with range_start_offset plus range_size. For the last advertised tile (4095, 4095), the addition can wrap to zero, bypass the bounds check, and pass an invalid source pointer and a one-terabyte length to memcpy. The observed result is an out-of-bounds read and process crash; opening the file alone does not trigger the issue because tile decoding is required. This issue is fixed in version 1.23.1. |
| libheif is a HEIF and AVIF file format decoder and encoder. In 1.23.0 and earlier, a crafted image sequence with a 2x2 primary plane and a 256x256 auxiliary alpha plane can cause attacker-controlled heap corruption during a normal decode and re-encode workflow. Track_Visual::decode_next_image_sample() calls transfer_channel_from_image_as() without checking that the auxiliary alpha dimensions match the main frame. The resulting inconsistent image reaches heif_track_decode_next_image() and then heif_context_encode_image(). In unc_encoder::encode(), unc_encoder_component_interleave::encode_tile() sizes its buffer with compute_tile_data_size_bytes() using the primary dimensions but copies each component using its actual plane dimensions. The oversized alpha plane is therefore copied beyond the allocation, causing an out-of-bounds write; the inverse size mismatch can also produce an out-of-bounds read. This issue is fixed in version 1.23.1. |
| A maliciously crafted PDF file, when parsed through Autodesk Revit, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process. |
| An out-of-bounds read vulnerability was found in swtpm's SWTPM_NVRAM_CheckHeader() function. The entry guard checks the buffer length against sizeof(bh), where bh is a pointer, instead of sizeof(*bh), the actual struct size. This allows an undersized buffer to pass validation, causing a 2-byte heap overread on 64-bit systems (6 bytes on 32-bit) when accessing the totlen field. This may cause daemon termination on some platforms and leaks heap data to the log. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel: Validate length before parsing diagnostics TLV
btintel_diagnostics() accesses tlv->val[0] without first validating
that the diagnostics VSE is long enough to contain that field, so
may cause reading data beyond the received frame.
Fix by validating the length before access. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: libiscsi: Fix stale-data leak into the SCSI sense buffer
iscsi_scsi_cmd_rsp() copies the sense data of a SCSI Response from the
target-supplied data segment. The segment carries a 2-byte sense length
followed by the sense bytes, so it must hold 2 + senselen bytes, but the
bounds check only requires datalen >= senselen:
senselen = get_unaligned_be16(data);
if (datalen < senselen)
goto invalid_datalen;
memcpy(sc->sense_buffer, data + 2,
min_t(uint16_t, senselen, SCSI_SENSE_BUFFERSIZE));
A target that returns a SCSI Response whose datalen equals senselen
(with senselen <= SCSI_SENSE_BUFFERSIZE) makes the memcpy() from data +
2 read up to two bytes past the received data. Those bytes are stale
conn->data contents and end up in the command's sense buffer, which is
returned to userspace.
Account for the 2-byte sense length prefix in the check. |
| Sony XAV-9500ES prh_l2_decode_packet Out-Of-Bounds Read Information Disclosure Vulnerability. This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of Sony XAV-9500ES devices. An attacker must first obtain the ability to pair a malicious Bluetooth device with the target system in order to exploit this vulnerability.
The specific flaw exists within the handling of Bluetooth L2CAP packets. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated buffer. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of the device. Was ZDI-CAN-28990. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_sip: widen NAT rewrite delta to s32 in sip_help_tcp()
sip_help_tcp() stores the size change of each NAT-rewritten SIP message
in s16 diff and accumulates it in s16 tdiff, but a single message can
grow by more than S16_MAX while the packet stays under the 65535
enlarge_skb() limit: nf_nat_sip() rewrites every matching URI, and a long
Contact list expands the message by tens of kilobytes. diff then wraps,
and "datalen = datalen + diff - msglen" yields a huge unsigned datalen,
so the next iteration's ct_sip_get_header() reads past the linearized skb
tail.
Widen diff, tdiff and the seq_adjust hook to s32. Both are bounded by the
65535 byte packet limit, and the seqadj core is already s32
(nf_ct_seqadj_set() takes s32), so no previously accepted input is
rejected.
BUG: KASAN: use-after-free in ct_sip_get_header (net/netfilter/nf_conntrack_sip.c:464)
Read of size 1 at addr ffff888010800000 by task ksoftirqd/1/25
ct_sip_get_header (net/netfilter/nf_conntrack_sip.c:464)
sip_help_tcp (net/netfilter/nf_conntrack_sip.c:1694)
nf_confirm (net/netfilter/nf_conntrack_proto.c:183)
nf_hook_slow (net/netfilter/core.c:619)
ip6_output (net/ipv6/ip6_output.c:246)
ip6_forward (net/ipv6/ip6_output.c:690)
ipv6_rcv (net/ipv6/ip6_input.c:351)
__netif_receive_skb_one_core (net/core/dev.c:6212)
process_backlog (net/core/dev.c:6676)
__napi_poll (net/core/dev.c:7735)
net_rx_action (net/core/dev.c:7955)
handle_softirqs (kernel/softirq.c:622)
run_ksoftirqd (kernel/softirq.c:1076)
... |
| mod_auth_openidc is an OpenID Certified authentication and authorization module for the Apache 2.x HTTP server that implements the OpenID Connect Relying Party functionality. Prior to 2.4.19.4, an out-of-bounds read and a one-byte out-of-bounds write exist in the state-cookie parser of `mod_auth_openidc`. The issue is fixed in version 2.4.19.4 by stopping the scan at the string terminator so a value-less token is rejected. No in-product workarounds are available. As a stop-gap, an upstream reverse proxy or WAF that rejects or normalizes malformed `Cookie` headers (tokens lacking `=`) can reduce exposure, but upgrading is the recommended remediation. |
| iccDEV provides a set of libraries and tools for working with ICC color management profiles. Versions prior to 2.3.2.1 have a `CIccEmbedIO::Read8()` size_t underflow. The issue arises due to an embedded-profile read defect when parsing ICC profiles containing `icSigEmbeddedV5ProfileTag` data with `icSigEmbeddedProfileType` payloads. Version 2.3.2.1 patches the issue. No known workarounds are available. |
| ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2026-67306. Reason: This candidate is a duplicate of CVE-2026-67306. Notes: All CVE users should reference CVE-2026-67306 instead of this candidate. |
| PyTorch torchvision through 0.28.0, fixed in commit 4e05dc2, contains an out-of-bounds heap read vulnerability in the GIF decoder's read_from_tensor callback that passes unclamped length to memcpy. Attackers can supply malicious or truncated GIF files to cause denial of service via segmentation fault or disclose adjacent heap memory contents. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote authenticated attacker to obtain sensitive information or cause a denial of service due to an out-of-bounds read. |
