| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM Documentation Offline 1.0.0 through 1.4.1 could allow a remote attacker to execute arbitrary code due to improper control of file paths. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvneta: re-enable percpu interrupt on resume
On Marvell MPIC platforms (Armada 370/XP/38x), mvneta uses a percpu
IRQ disable/enable scheme for NAPI: the ISR (mvneta_percpu_isr) calls
disable_percpu_irq() to mask the MPIC per-CPU interrupt and schedules
NAPI poll, which calls enable_percpu_irq() on completion to unmask.
If suspend occurs while NAPI poll is pending (between
disable_percpu_irq in the ISR and enable_percpu_irq in poll
completion), the interrupt is never re-enabled:
1. mvneta_percpu_isr: disable_percpu_irq() + napi_schedule()
=> MPIC masked, percpu_enabled cpumask bit cleared
2. NAPI poll does not complete before suspend proceeds
(on PREEMPT_RT this is highly likely since softirqs run in
ksoftirqd which gets frozen; on non-RT it can happen when
softirq processing is deferred to ksoftirqd)
3. mvneta_stop_dev => napi_disable(): cancels the pending poll
without executing the completion path
4. suspend_device_irqs => IRQCHIP_MASK_ON_SUSPEND: masks MPIC
(already masked, but records IRQS_SUSPENDED)
5. Resume: mpic_resume checks irq_percpu_is_enabled() => false
(bit was cleared in step 1) => skips unmask
6. mvneta_start_dev only restores device-level INTR_NEW_MASK,
does not touch the MPIC per-CPU mask
Result: MPIC per-CPU interrupt stays masked permanently. The NIC
generates interrupts (INTR_NEW_CAUSE != 0) but the CPU never
receives them, causing complete loss of network connectivity.
Fix by calling on_each_cpu(mvneta_percpu_enable) in the resume path
to unconditionally unmask the MPIC per-CPU interrupt regardless of
pre-suspend state. |
| In Progress ShareFile Storage Zones Controller versions <= 5.12.5 and <= 6.0.2, an authenticated zone administrator can exploit improper validation in the download preparation flow, enabling attacker-controlled files to be written outside the intended preparation directory. This can lead to remote code execution in v5 versions. Remote code execution is not confirmed on v6 versions. |
| External control of file name or path vulnerability in Johnson Controls Airwall allows : File Manipulation.
This issue affects Airwall: before 4.1. |
| A security vulnerability has been identified in Planet9 due to incorrect file permissions assigned to an application executable used by the Planet9 background service. The service runs with SYSTEM privileges, while the affected executable grants excessive permissions to non-administrative users. As a result, an authenticated local user could potentially modify or replace the executable and execute arbitrary code with SYSTEM privileges when the service starts or the system is restarted. |
| GitPython before 3.1.57 contains an incomplete denylist in the unsafe_git_archive_options guard that omits --add-file and --add-virtual-file options. Attackers can supply these options to Repo.archive() to read arbitrary files from the filesystem and include them in the returned archive. |
| NortheBridge/luminalshine is a Sunshine-compatible game stream host for Moonlight. Prior to version 26.05.0-rc4, a latent gap exists on a default install, the file at `src/platform/windows/misc.cpp` lives at `C:\ProgramData\LuminalShine\config\apps.json` and is created by the `SYSTEM` service. Under Windows' default `C:\ProgramData` inheritance, that gives `BUILTIN\Users` only Read+Execute — not writable — so the canonical EoP doesn't actually trigger on a vanilla install. Version 26.05.0-rc4 contains a patch for the issue. As a workaround, use default condition DACLs for `ProgramData`. |
| Missing Authorization and Authorization Bypass Through User-Controlled Key and Incorrect Permission Assignment for Critical Resource and Exposure of Sensitive Information to an Unauthorized Actor in code.gitea.io/gitea |
| FreePBX is an open source IP PBX. From 17.0.5.34 until 17.0.11, the publicKeySave AJAX endpoint in Backup.class.php accepts an authenticated administrator's SSH public key and appends it to /home/asterisk/.ssh/authorized_keys for the asterisk system user without reliably enforcing backup-only command and source restrictions. The key grants persistent shell access that can execute arbitrary commands, access FreePBX and call data, modify system files, and disrupt services. This issue is fixed in version 17.0.11. |
| luci-app-lxc contains an ACL inconsistency vulnerability that allows low-privileged authenticated LuCI users to access backend container management routes without proper authorization checks. Attackers can exploit path traversal via `/.%2E` in the `lxc_name` parameter to escape container directories and control host-side scripts executed through `lxc.hook.start-host`, achieving root code execution on the OpenWrt host. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a local authenticated attacker to change the ownership of arbitrary files due to improper validation of an attacker-controlled file path. |
| Laravel Valet versions 1.1.4 to 2.0.3 contain a local privilege escalation vulnerability that allows users to modify the valet command with root privileges. Attackers can edit the symlinked valet command to execute arbitrary code with root permissions without additional authentication. |
| An issue was discovered in OpenStack Nova before 30.2.2, 31 before 31.2.1, and 32 before 32.1.1. By writing a malicious QCOW header to a root or ephemeral disk and then triggering a resize, a user may convince Nova's Flat image backend to call qemu-img without a format restriction, resulting in an unsafe image resize operation that could destroy data on the host system. Only compute nodes using the Flat image backend (usually configured with use_cow_images=False) are affected. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a local attacker to gain elevated privileges due to improper validation of the LANG environment variable. |
| compliance-trestle is a tooling platform for managing compliance as code. Prior to versiions 3.12.2 and 4.0.3, the compliance-trestle library's remote fetching cache mechanism (HTTPSFetcher and SFTPFetcher) constructs the local cache file path from the URL path component without sanitizing path traversal sequences (`../`). When a remote OSCAL profile references a URL with traversal in its path, the HTTP response body is written to a location outside the intended cache directory, enabling arbitrary file write with attacker-controlled content to the filesystem. Versions 3.12.3 and 4.0.3 patch the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vkms: Convert to DRM's vblank timer
Replace vkms' vblank timer with the DRM implementation. The DRM
code is identical in concept, but differs in implementation.
Vblank timers are covered in vblank helpers and initializer macros,
so remove the corresponding hrtimer in struct vkms_output. The
vblank timer calls vkms' custom timeout code via handle_vblank_timeout
in struct drm_crtc_helper_funcs. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: mdb: Fix source list corruption on a failed replace
When replacing the source list of an MDB remote entry, all existing
sources are first marked for deletion and vxlan_mdb_remote_srcs_add()
is then called to add the new source list. Sources present in the new
list have their deletion mark cleared, and any sources left marked
afterwards are removed.
If vxlan_mdb_remote_srcs_add() fails partway through, its error path
deletes all entries on the remote's source list. That rollback is only
correct for its other caller, vxlan_mdb_remote_add(), where the remote
was just allocated and the list contains solely entries added during
the call. On the replace path the list also holds pre-existing sources,
so a failed replace tears them down together with their (S, G)
forwarding entries instead of leaving the entry unchanged.
This is reachable from an existing (*, G) remote. An EXCLUDE filter
that loses sources starts forwarding traffic that should be blocked,
while an INCLUDE filter that loses sources drops traffic that should be
forwarded.
Mark entries created during the current pass with a new
VXLAN_SGRP_F_NEW flag. On failure, delete only those entries and clear
the deletion mark on the pre-existing ones, so a failed replace leaves
the source list untouched. Retain the flag until the whole operation
succeeds and then clear it. Also stop vxlan_mdb_remote_src_add() from
deleting a pre-existing entry it only looked up when adding that
entry's forwarding entry fails. |
| Network-AI is a TypeScript/Node.js multi-agent orchestrator. Prior to version 5.12.2, `EnvironmentManager.listBackups()` reads each backup's `_manifest.json` and trusts the manifest's `path` field. `EnvironmentManager.pruneBackups()` later passes that trusted `entry.path` directly to `rmSync(entry.path, { recursive: true, force: true })`. An attacker who can place or modify a manifest inside `data/<env>/.backups/<name>/_manifest.json` can cause `network-ai env backup prune --env <env> --keep <n>` or any code path invoking `pruneBackups()` to recursively delete an arbitrary path accessible to the Network-AI process user. This is fixed in v5.12.2. `pruneBackups()` no longer passes `entry.path` from the on-disk manifest to `rmSync`. The deletion path is recomputed from a format-validated `entry.backupId`, and a `dirname` containment check confines deletion to exactly one level under the backups directory. A poisoned manifest (e.g. `"path": "/"`) is now inert. |
| PDF::WebKit versions through 1.2 for Perl allow OS command injection via a 2-arg open() of the output path in to_pdf and of stylesheet paths in _style_tag_for.
to_pdf reads the generated PDF back from its path argument, and _style_tag_for reads each entry of the stylesheets list, by assigning the path to a local @ARGV and reading it with the diamond operator, which opens each @ARGV element with Perl's 2-arg open(). A value that begins or ends with a pipe ("| cmd", "cmd |") is run as a command rather than opened as a file, and one that begins with a redirect ("> path", ">> path") opens that path for write or append. to_file forwards its path argument to to_pdf and reaches the same read.
Any caller that forwards untrusted input as the output path or as a stylesheets entry can run a command under the process UID; with the "cmd |" form the command's output is returned in place of the PDF, and with the "> path" form the named file is truncated. Stylesheets may only be added to an HTML source, so a URL or file source exposes the output path alone. |
| The WP Photo Album Plus WordPress plugin before 9.2.07.002 does not validate a client-controlled value used to build a file path in one of its public endpoint actions, and performs no authorisation check on it, allowing unauthenticated attackers to delete arbitrary ZIP archives on the server, including ones stored outside the web root. |
