| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Delta Electronics DIAView has Command Injection vulnerability. |
| GLPI is a free asset and IT management software package. Prior to 10.0.21 and 11.0.3, an unauthorized user can access GLPI documents attached to any item (ticket, asset, ...). If the public FAQ is enabled, this unauthorized access can be performed by an anonymous user. This vulnerability is fixed in 10.0.21 and 11.0.3. |
| The vulnerability, if exploited, could allow an authenticated miscreant
(OS standard user) to tamper with TCL Macro scripts and escalate
privileges to OS system, potentially resulting in complete compromise of
the model application server. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on EX4k Series and QFX5k Series platforms allows an unauthenticated network-adjacent attacker flapping an interface to cause traffic between VXLAN Network Identifiers (VNIs) to drop, leading to a Denial of Service (DoS).
On all EX4k and QFX5k platforms, a link flap in an
EVPN-VXLAN configuration Link Aggregation Group (LAG)
results in Inter-VNI traffic dropping when there are multiple load-balanced next-hop routes for the same destination.
This issue is only applicable to systems that support EVPN-VXLAN Virtual Port-Link Aggregation Groups (VPLAG), such as the QFX5110, QFX5120, QFX5200, EX4100, EX4300, EX4400, and EX4650.
Service can only be restored by restarting the affected FPC via the 'request chassis fpc restart slot <slot-number>' command.
This issue affects Junos OS
on EX4k and QFX5k Series:
* all versions before 21.4R3-S12,
* all versions of 22.2
* from 22.4 before 22.4R3-S8,
* from 23.2 before 23.2R2-S5,
* from 23.4 before 23.4R2-S5,
* from 24.2 before 24.2R2-S3,
* from 24.4 before 24.4R2. |
| A Buffer Over-read vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS).
When an affected device receives a BGP update with a set of specific optional transitive attributes over an established peering session, rpd will crash and restart when attempting to advertise the received information to another peer.
This issue can only happen if one or both of the BGP peers of the receiving session are non-4-byte-AS capable as determined from the advertised capabilities during BGP session establishment. Junos OS and Junos OS Evolved default behavior is 4-byte-AS capable unless this has been specifically disabled by configuring:
[ protocols bgp ... disable-4byte-as ]
Established BGP sessions can be checked by executing:
show bgp neighbor <IP address> | match "4 byte AS"
This issue affects:
Junos OS:
* all versions before 22.4R3-S8,
* 23.2 versions before 23.2R2-S5,
* 23.4 versions before 23.4R2-S6,
* 24.2 versions before 24.2R2-S2,
* 24.4 versions before 24.4R2;
Junos OS Evolved:
* all versions before 22.4R3-S8-EVO,
* 23.2 versions before 23.2R2-S5-EVO,
* 23.4 versions before 23.4R2-S6-EVO,
* 24.2 versions before 24.2R2-S2-EVO,
* 24.4 versions before 24.4R2-EVO. |
| An Improper Handling of Exceptional Conditions vulnerability in packet processing of Juniper Networks Junos OS allows an unauthenticated, network-adjacent attacker sending a specifically malformed ICMP packet to cause an FPC to crash and restart, resulting in a Denial of Service (DoS).
When an ICMP packet is received with a specifically malformed IP header value, the FPC receiving the packet crashes and restarts. Due to the specific type of malformed packet, adjacent upstream routers would not forward the packet, limiting the attack surface to adjacent networks.
This issue only affects ICMPv4. ICMPv6 is not vulnerable to this issue.
This issue affects Junos OS:
* all versions before 21.2R3-S9,
* from 21.4 before 21.4R3-S10,
* from 22.2 before 22.2R3-S7,
* from 22.3 before 22.3R3-S4,
* from 22.4 before 22.4R3-S5,
* from 23.2 before 23.2R2-S3,
* from 23.4 before 23.4R2-S3,
* from 24.2 before 24.2R1-S2, 24.2R2. |
| A Use After Free vulnerability in the chassis daemon (chassisd) of Juniper Networks Junos OS and Junos OS Evolved allows a network-based attacker authenticated with low privileges to cause a Denial-of-Service (DoS).
When telemetry collectors are frequently subscribing and unsubscribing to sensors continuously over a long period of time, telemetry-capable processes like chassisd, rpd or mib2d will crash and restart, which - depending on the process - can cause a complete outage until the system has recovered.
This issue affects:
Junos OS:
* all versions before 22.4R3-S8,
* 23.2 versions before 23.2R2-S5,
* 23.4 versions before 23.4R2;
Junos OS Evolved:
* all versions before 22.4R3-S8-EVO,
* 23.2 versions before 23.2R2-S5-EVO,
* 23.4 versions before 23.4R2-EVO. |
| A Use After Free vulnerability was identified in the 802.1X authentication daemon (dot1xd) of Juniper Networks Junos OS and Junos OS Evolved that could allow an authenticated, network-adjacent attacker flapping a port to crash the dot1xd process, leading to a Denial of Service (DoS), or potentially execute arbitrary code within the context of the process running as root.
The issue is specific to the processing of a change in authorization (CoA) when a port bounce occurs. A pointer is freed but was then referenced later in the same code path. Successful exploitation is outside the attacker's direct control due to the specific timing of the two events required to execute the vulnerable code path.
This issue affects systems with 802.1X authentication port-based network access control (PNAC) enabled.
This issue affects:
Junos OS:
* from 23.2R2-S1 before 23.2R2-S5,
* from 23.4R2 before 23.4R2-S6,
* from 24.2 before 24.2R2-S3,
* from 24.4 before 24.4R2-S1,
* from 25.2 before 25.2R1-S2, 25.2R2;
Junos OS Evolved:
* from 23.2R2-S1 before 23.2R2-S5-EVO,
* from 23.4R2 before 23.4R2-S6-EVO,
* from 24.2 before 24.2R2-S3-EVO,
* from 24.4 before 24.4R2-S1-EVO,
* from 25.2 before 25.2R1-S2-EVO, 25.2R2-EVO. |
| A vulnerability regarding out-of-bounds read is found in the video interface. This allows remote attackers to execute arbitrary code via unspecified vectors. The following models with Synology Camera Firmware versions before 1.2.0-0525 may be affected: BC500, CC400W and TC500. |
| In versions of ScreenConnect™ prior to 25.8, server-side validation and integrity checks within the extension subsystem could allow the installation and execution of untrusted or arbitrary extensions by authorized or administrative users. Abuse of this behavior could result in the execution of custom code on the server or unauthorized access to application configuration data. This issue affects only the ScreenConnect server component; host and guest clients are not impacted. ScreenConnect 25.8 introduces enhanced server-side configuration handling and integrity checks to ensure only trusted extensions can be installed. |
| Missing authentication for critical function vulnerability in the webapi component in Synology Drive Server before 3.0.4-12699, 3.2.1-23280, 3.5.0-26085 and 3.5.1-26102 allows remote attackers to obtain administrator credentials via unspecified vectors. |
| Improper neutralization of special elements used in an SQL command ('SQL Injection') vulnerability in the system syncing daemon in Synology Drive Server before 3.0.4-12699, 3.2.1-23280, 3.5.0-26085 and 3.5.1-26102 allows remote attackers to inject SQL commands, limited to write operations, via unspecified vectors. |
| SnapCenter versions prior to
6.0.1P1 and 6.1P1 are susceptible to a vulnerability which may allow an
authenticated SnapCenter Server user to become an admin user on a remote
system where a SnapCenter plug-in has been installed. |
| An authentication bypass vulnerability in the Tongyu AX1800 Wi-Fi 6 Router with firmware 1.0.0 allows unauthenticated network-adjacent attackers to perform arbitrary configuration changes without providing credentials, as long as a valid admin session is active. This can result in full compromise of the device (i.e., via unauthenticated access to /boaform/formSaveConfig and /boaform/admin endpoints). |
| Axios is a promise based HTTP client for the browser and Node.js. When Axios starting in version 0.28.0 and prior to versions 0.30.2 and 1.12.0 runs on Node.js and is given a URL with the `data:` scheme, it does not perform HTTP. Instead, its Node http adapter decodes the entire payload into memory (`Buffer`/`Blob`) and returns a synthetic 200 response. This path ignores `maxContentLength` / `maxBodyLength` (which only protect HTTP responses), so an attacker can supply a very large `data:` URI and cause the process to allocate unbounded memory and crash (DoS), even if the caller requested `responseType: 'stream'`. Versions 0.30.2 and 1.12.0 contain a patch for the issue. |
| This candidate was withdrawn by its CNA. Further investigation showed that it was not a security issue. |
| Dell PowerFlex Manager VM, versions prior to 4.6.2.1, contains an Insertion of Sensitive Information into Log File vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to the disclosure of certain user credentials. The attacker may be able to use the exposed credentials to access the system with privileges of the compromised account. |
| The AXIS Camera Station Server had a flaw that allowed
to bypass authentication that is normally required. |
| Use of Hard-coded Credentials vulnerability in Utarit Information Services Inc. SoliClub allows Read Sensitive Constants Within an Executable.This issue affects SoliClub: from 5.2.4 before 5.3.7. |
| Exposure of Private Personal Information to an Unauthorized Actor vulnerability in Utarit Informatics Services Inc. SoliClub allows Query System for Information.This issue affects SoliClub: from 5.2.4 before 5.3.7. |
