| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: Stop leased rxq before uninstalling its memory provider
netif_rxq_cleanup_unlease() tears down the memory provider that was
installed on a physical RX queue through a netkit queue lease. It
currently revokes the provider's DMA mappings before stopping the
physical queue:
__netif_mp_uninstall_rxq(virt_rxq, p); /* DMA unmap */
__netif_mp_close_rxq(phys_rxq->dev, rxq_idx, p); /* queue stop */
This inverts the ordering used by the regular teardown paths (normal
device unregister and the io_uring zcrx close path), which stop the
queue before revoking the provider's mappings.
With the physical queue still live, its NAPI can keep consuming
net_iov entries from the page_pool alloc cache after the
__netif_mp_uninstall_rxq() has already cleared their dma_addr,
opening a window for the device to DMA to a stale or zero address.
Fix it by swapping the two calls so the queue is stopped (and its
NAPI quiesced) before the provider is uninstalled. No functional
regression was observed across repeated runs of the nk_qlease.py
HW selftest, which exercises the lease teardown path; this was
tested against fbnic QEMU emulation. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: clear sock_ops cb flags before force-closing a child socket
A child socket inherits the listener's bpf_sock_ops_cb_flags via
sk_clone_lock(). If its setup fails in tcp_v4_syn_recv_sock() /
tcp_v6_syn_recv_sock(), the child is freed through put_and_exit, where
inet_csk_prepare_forced_close() drops the socket lock and tcp_done() runs
without it.
If BPF_SOCK_OPS_STATE_CB_FLAG was inherited, tcp_done() -> tcp_set_state()
calls tcp_call_bpf(), which expects the lock and trips sock_owned_by_me():
WARNING: include/net/sock.h:1799 at tcp_set_state+0x433/0x550
RIP: 0010:tcp_set_state+0x433/0x550 include/net/sock.h:1799
Call Trace:
<IRQ>
tcp_done+0xba/0x250 net/ipv4/tcp.c:5095
tcp_v4_syn_recv_sock+0x850/0xa50 net/ipv4/tcp_ipv4.c:1787
tcp_check_req+0xf30/0x1360 net/ipv4/tcp_minisocks.c:926
tcp_v4_rcv+0x1047/0x1b50 net/ipv4/tcp_ipv4.c:2164
</IRQ>
The child is freed before it is ever established, so it should run no
sock_ops callback. Clear its cb flags in inet_csk_prepare_for_destroy_sock(),
the common point for the IPv4, IPv6 and chtls forced-close paths and for the
MPTCP ->syn_recv_sock() failure path (dispose_child), which reaches tcp_done()
on a child that was never established too. |
| In the Linux kernel, the following vulnerability has been resolved:
net: watchdog: fix refcount tracking races
Blamed commit converted the untracked dev_hold()/dev_put() calls
in the watchdog code to use the tracked dev_hold_track()/dev_put_track()
(which were later renamed/interfaced to netdev_hold() and netdev_put()).
By introducing dev->watchdog_dev_tracker to store the
reference tracking information without adding synchronization
between netdev_watchdog_up() and dev_watchdog(), it enabled the
race condition where this pointer could be overwritten or freed
concurrently, leading to the list corruption crash syzbot reported:
list_del corruption, ffff888114a18c00->next is NULL
kernel BUG at lib/list_debug.c:52 !
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 1 UID: 0 PID: 91 Comm: kworker/u8:5 Not tainted syzkaller #0 PREEMPT(lazy)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/09/2026
Workqueue: events_unbound linkwatch_event
RIP: 0010:__list_del_entry_valid_or_report.cold+0x22/0x2a lib/list_debug.c:52
Call Trace:
<TASK>
__list_del_entry_valid include/linux/list.h:132 [inline]
__list_del_entry include/linux/list.h:246 [inline]
list_move_tail include/linux/list.h:341 [inline]
ref_tracker_free+0x1a7/0x6c0 lib/ref_tracker.c:329
netdev_tracker_free include/linux/netdevice.h:4491 [inline]
netdev_put include/linux/netdevice.h:4508 [inline]
netdev_put include/linux/netdevice.h:4504 [inline]
netdev_watchdog_down net/sched/sch_generic.c:600 [inline]
dev_deactivate_many+0x28c/0xfe0 net/sched/sch_generic.c:1363
dev_deactivate+0x109/0x1d0 net/sched/sch_generic.c:1397
linkwatch_do_dev net/core/link_watch.c:184 [inline]
linkwatch_do_dev+0xd3/0x120 net/core/link_watch.c:166
__linkwatch_run_queue+0x3a5/0x810 net/core/link_watch.c:240
linkwatch_event+0x8f/0xc0 net/core/link_watch.c:314
process_one_work+0xa0e/0x1980 kernel/workqueue.c:3314
process_scheduled_works kernel/workqueue.c:3397 [inline]
worker_thread+0x5ef/0xe50 kernel/workqueue.c:3478
kthread+0x370/0x450 kernel/kthread.c:436
ret_from_fork+0x69a/0xc80 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
This patch has three coordinated parts:
1) Add dev->watchdog_lock and dev->watchdog_ref_held to serialize watchdog operations.
2) Remove netdev_watchdog_up() call from netif_carrier_on():
This ensures netdev_watchdog_up() is only called from process/BH context
(via linkwatch workqueue dev_activate()), allowing us to use
spin_lock_bh() for synchronization.
3) Synchronize watchdog up and watchdog timer:
Protect netdev_watchdog_up() with tx_global_lock and watchdog_lock.
Only allocate a new tracker in netdev_watchdog_up() if one is
not already present.
In dev_watchdog(), ensure we don't release the tracker if the
timer was rescheduled either by dev_watchdog() itself or concurrently
by netdev_watchdog_up(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_dup_netdev: add nf_dev_xmit_recursion*() helpers and use them
Update nft_dup and nft_fwd to use the nf_dev_xmit_recursion() helpers.
This patch also disables BH when transmitting the skb to address a
possible migration to different CPU leading to imbalanced decrementation
of the recursion counters.
This is modeled after Florian Westphal's dev_xmit_recursion*() API
available since commit 97cdcf37b57e ("net: place xmit recursion in
softnet data") according to its current state in the tree. |
| A flaw has been found in Orange View Limited DualSafe Password Manager & Digital Vault Extension up to 1.4.35 on Chrome. Affected is an unknown function of the component postMessage-based Bridge. Executing a manipulation can lead to information disclosure. The attack can be launched remotely. A high complexity level is associated with this attack. The exploitability is told to be difficult. The exploit has been published and may be used. The vendor was contacted early about this disclosure. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Proper rollback if the ioremap fails
bnxt_qplib_alloc_dpi returns success even if ioremap fails.
Add the proper rollback when the ioremap fails and return
-ENOMEM status. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Avoid repeated requests to allocate WC pages
Applications can request multiple WC pages for the same ucontext.
As of now, only 1 WC page per ucontext is supported. Add a lock to
avoid concurrent access and a check to fail repeated requests.
Also, if the mmap entry insert fails for the WC, free the Doorbell
page index mapped for the WC page. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in same_client_has_lease()
same_client_has_lease() returns an opinfo pointer from ci->m_op_list
after dropping ci->m_lock without taking a reference.
smb_grant_oplock() then dereferences that pointer in copy_lease() and
when checking breaking_cnt. A concurrent close can remove the old lease
from ci->m_op_list and drop the last reference before the caller uses
the returned pointer, leading to a use-after-free.
Take a reference when same_client_has_lease() selects an existing lease,
drop any previous match while scanning, and release the returned
reference in smb_grant_oplock() after copying the lease state. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: call _ntfs_bad_inode() when failing to rename
It is safe to call _ntfs_bad_inode on live inodes since:
commit 519b078998ce ("fs/ntfs3: Exclude call make_bad_inode for live nodes.")
The WARN_ON was added when it wasn't safe by:
commit d99208b91933 ("fs/ntfs3: cancle set bad inode after removing name fails")
Replace the WARN_ON with a call to _ntfs_bad_inode() to prevent further
operations on the inconsistent inode. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: Fix possible use after free
In dma_release_channel(), check chan->device->privatecnt after call
dma_chan_put(). However, dma_chan_put() call dma_device_put() which could
release the last reference of the device if the DMA provider is already
gone and hence free it.
Fixes it by moving dma_chan_put() after the check. |
| In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Decouple req recycling from RPC completion
rl_kref formerly served two distinct lifetimes through a single
refcount: it gated when a Reply could wake its RPC task, and it
gated when an rpcrdma_req could return to its free pool. The
marshal path took the Send-side reference only when SGEs needed
DMA-unmap (sc_unmap_count > 0), which made a Send carrying only
pre-registered buffers an exception: the Reply handler dropped
rl_kref from 1 to 0 and freed the req while the HCA might still
be DMA-reading from its send buffer.
Give rl_kref a narrower job. The RPC layer takes one reference
when slot allocation hands a req out. rpcrdma_prepare_send_sges()
takes a Send-side reference unconditionally after WR preparation
succeeds. xprt_rdma_free_slot() and xprt_rdma_bc_free_rqst() drop
the RPC-layer reference; rpcrdma_sendctx_unmap() drops the
Send-side reference. The req returns to its free pool only after
both owners have signed off.
The existing kref_init(&req->rl_kref) call in
rpcrdma_prepare_send_sges() is removed. Initialization moves to
the slot-allocation paths (xprt_rdma_alloc_slot and
rpcrdma_bc_rqst_get), and the release callback re-arms rl_kref
before the req returns to a free pool. A re-init in the marshal
path would discard the RPC-layer reference that already exists
on entry.
Three invariants follow:
- Any rpcrdma_req held by an rpc_rqst has rl_kref >= 1.
xprt_rdma_alloc_slot(), rpcrdma_bc_rqst_get(), and the
backlog-wake branch in xprt_rdma_alloc_slot() each kref_init
rl_kref before publishing the req. Without this invariant,
an RPC task that aborts between slot allocation and marshal
(gss_refresh failure or signal during call_connect, for
example) would drive xprt_release() ->
xprt_rdma_free_slot() -> kref_put against a refcount of
zero, saturating refcount_t and stranding the slot.
- The Send-side reference is taken only after WR prep
succeeds. A mapping failure in rpcrdma_prepare_send_sges()
runs rpcrdma_sendctx_cancel(), which DMA-unmaps the sendctx
and clears sc_req without touching rl_kref. The sendctx
ring walks in rpcrdma_sendctx_put_locked() and
rpcrdma_sendctxs_destroy() skip entries with sc_req == NULL,
so a burst of -EIO marshal failures cannot hold reqs off
rb_send_bufs.
- The release callback re-arms rl_kref so the next consumer
enters with the invariant satisfied.
Replies now complete the RPC directly. rpcrdma_reply_handler()
calls rpcrdma_complete_rqst() in place of kref_put on the
non-LocalInv branch. The LocalInv branch already completes the
RPC from frwr_unmap_async() and is unaffected.
Because Send-side references can now outlive RPC completion,
connection teardown drains sendctx entries whose unsignaled
Sends never had a later signaled completion to walk the ring.
rpcrdma_sendctxs_destroy() walks the active range and runs
rpcrdma_sendctx_unmap() on each entry with a non-NULL sc_req
before the request buffers are reset, and is moved ahead of
rpcrdma_reqs_reset() in rpcrdma_xprt_disconnect() so the reqs
are still in their pre-reset state when the Send-side refs are
released.
The drain creates a teardown-ordering hazard on the backchannel
path. With the new lifetime, releasing a bc_prealloc req from
rpcrdma_req_release() re-adds it to bc_pa_list. The disconnect
in xprt_rdma_destroy() runs after xprt_destroy_backchannel() has
already emptied bc_pa_list, so the drained reqs would otherwise
leak. xprt_rdma_destroy() now runs xprt_rdma_bc_destroy(xprt, 0)
a second time after the disconnect to reclaim them. |
| In the Linux kernel, the following vulnerability has been resolved:
nfs: use nfsi->rwsem to protect traversal of the file lock list
Lingfeng identified a bug and suggested two solutions, but both appear
to have issues.
Generally, we cannot release flc_lock while iterating over the file lock
list to avoid use-after-free (UAF) problems with file locks. However,
functions like nfs_delegation_claim_locks and nfs4_reclaim_locks cannot
adhere to this rule because recover_lock or nfs4_lock_delegation_recall
may take a long time. To resolve this, NFS switches to using nfsi->rwsem
for the same protection, and nfs_reclaim_locks follows this approach.
Although nfs_delegation_claim_locks uses so_delegreturn_mutex instead,
this is inadequate since a single inode can have multiple nfs4_state
instances. Therefore, the fix is to also use nfsi->rwsem in this case.
Furthermore, after commit c69899a17ca4 ("NFSv4: Update of VFS byte range
lock must be atomic with the stateid update"), the functions
nfs4_locku_done and nfs4_lock_done also break this rule because they
call locks_lock_inode_wait without holding nfsi->rwsem. Simply adding
this protection could cause many deadlocks, so instead, the call to
locks_lock_inode_wait is moved into _nfs4_proc_setlk. Regarding the bug
fixed by commit c69899a17ca4 ("NFSv4: Update of VFS byte range
lock must be atomic with the stateid update"), it has been resolved
after commit 0460253913e5 ("NFSv4: nfs4_do_open() is incorrectly triggering
state recovery") because all slots are drained before calling
nfs4_do_reclaim, which prevents concurrent stateid changes along this path.
Also, nfs_delegation_claim_locks does not cause this concurrency either
since when _nfs4_proc_setlk is called with NFS_DELEGATED_STATE, no RPC is
sent, so nfs4_lock_done is not called. Therefore,
nfs4_lock_delegation_recall from nfs_delegation_claim_locks is the first
time the stateid is set. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: prevent potential lcn remains uninitialized
The target VCN being sought was not found within runs[0], causing
run_lookup() to return false. This causes run_lookup_entry() to return
false, which in turn results in a len value of 0, and the new parameter
passed to attr_data_get_block() is NULL. Collectively, these factors
ultimately cause attr_data_get_block_locked() to exit prematurely without
initializing lcn, thereby triggering [1].
To prevent [1], the clen check within ni_seek_data_or_hole() has been
moved to occur before the lcn check.
[1]
BUG: KMSAN: uninit-value in ni_seek_data_or_hole+0x24f/0x5f0 fs/ntfs3/frecord.c:2862
ni_seek_data_or_hole+0x24f/0x5f0 fs/ntfs3/frecord.c:2862
ntfs_llseek+0x22a/0x4a0 fs/ntfs3/file.c:1530
vfs_llseek fs/read_write.c:391 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: resize log->one_page_buf when adopting on-disk page size
log_replay() allocates log->one_page_buf using the page size that was
chosen from the host PAGE_SIZE:
log->one_page_buf = kmalloc(log->page_size, GFP_NOFS);
Later, when a restart area is found, the log page size recorded on disk
is adopted:
t32 = le32_to_cpu(log->rst_info.r_page->sys_page_size);
if (log->page_size != t32) {
log->l_size = log->orig_file_size;
log->page_size = norm_file_page(t32, &log->l_size,
t32 == DefaultLogPageSize);
}
If the on-disk page size is larger than the size used for the initial
allocation, log->page_size grows but one_page_buf is left at its
original, smaller size. A subsequent unaligned read_log_page() then
reads log->page_size bytes into the undersized scratch buffer:
page_buf = page_off ? log->one_page_buf : *buffer;
err = ntfs_read_run_nb_ra(ni->mi.sbi, &ni->file.run, page_vbo, page_buf,
log->page_size, NULL, &log->read_ahead);
overflowing the allocation. This is reachable when mounting a dirty
NTFS volume whose log was formatted with a page size larger than the
buffer initially allocated on the mounting host (for example a 64K-log
volume mounted on a host that allocated a 4K scratch buffer).
Grow one_page_buf when the adopted on-disk page size exceeds the size
used for the initial allocation. On krealloc() failure the original
buffer is left intact and freed by the existing error path. |
| In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Fix ep kref imbalance on ADDR_CHANGE
rpcrdma_cm_event_handler() falls through to the disconnected: label
on RDMA_CM_EVENT_ADDR_CHANGE and calls rpcrdma_ep_put() with no
matching get when the event arrives before RDMA_CM_EVENT_ESTABLISHED.
The kref then underflows during connect teardown and
rpcrdma_xprt_disconnect() operates on a freed ep.
Reference counts across a normal connection lifecycle:
rpcrdma_ep_create() kref_init ->1
rpcrdma_xprt_connect() ep_get ->2 (before post_recvs)
RDMA_CM_EVENT_ESTABLISHED ep_get ->3
RDMA_CM_EVENT_DISCONNECTED ep_put ->2
rpcrdma_xprt_drain() ep_put ->1
rpcrdma_xprt_disconnect() tail ep_put ->0 (ep_destroy)
The connect-time get in rpcrdma_xprt_connect(), taken just before
rpcrdma_post_recvs() "while there are outstanding Receives," is
balanced by rpcrdma_xprt_drain. ADDR_CHANGE before ESTABLISHED has
no get to consume, so its put drops the count to 1 and the drain
put then frees the ep while rpcrdma_xprt_disconnect() still holds a
pointer to it.
Fix by dispatching on the prior re_connect_status via xchg(): for
prev == 0 (pre-ESTABLISHED) wake the connect waiter and return with
no put; for prev == 1 call rpcrdma_force_disconnect() and return.
The case-1 arm relies on the subsequent RDMA_CM_EVENT_DISCONNECTED
event -- reliably delivered when rdma_disconnect() is called on a
still-connected cm_id -- to balance the ESTABLISHED get;
rpcrdma_xprt_drain() continues to balance only that connect-time
get. Any other prior value means teardown is already in flight. |
| In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Fix bcall rep leak and unbounded peek
rpcrdma_is_bcall() decodes a reply's first words to decide whether
the frame is a backchannel call. Two issues in that decode path
let a short or malformed reply leak the receive buffer and drain
the Receive queue.
First, the speculative peek
p = xdr_inline_decode(xdr, 0);
/* five p++ reads follow */
asks xdr_inline_decode() for zero bytes, which returns xdr->p
without consulting xdr->end. The five subsequent __be32 reads can
then walk up to 20 bytes past the wire payload into stale regbuf
contents and misclassify the reply as a backchannel call.
Second, after the post-peek
p = xdr_inline_decode(xdr, 3 * sizeof(*p));
if (unlikely(!p))
return true;
the short-header arm returns true without calling
rpcrdma_bc_receive_call(). The contract with the caller is that a
true return transfers ownership of rep to the backchannel path:
rpcrdma_reply_handler()
if (rpcrdma_is_bcall(r_xprt, rep))
return; /* bare return, skips out_post */
...
out_post:
rpcrdma_post_recvs(r_xprt, credits + ...);
Because rpcrdma_bc_receive_call() never ran, no one took rep, but
rpcrdma_reply_handler still bare-returns past rpcrdma_rep_put()
and rpcrdma_post_recvs(). The rep, with its persistently
DMA-mapped receive buffer, is orphaned on rb_all_reps and freed
only at transport teardown. This completion reposts nothing, so
its slot is reclaimed only when a later forward-channel reply
reaches out_post and rpcrdma_post_recvs() allocates a fresh rep to
backfill; absent that traffic the Receive queue drains and the
peer's Sends draw RNR NAKs.
Fix by consulting xdr->end after the zero-length peek so the five
__be32 reads cannot run unless 20 bytes of wire payload remain. A
byte-precise comparison against xdr->end is required because a
non-4-aligned receive rounds the stream's word count up past the
true payload. Also return false from the short-header arm so the
reply falls through the normal out_norqst cleanup chain
(rpcrdma_rep_put() plus rpcrdma_post_recvs()). |
| In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Sanitize the reply credit grant after parsing
The out_norqst exit in rpcrdma_reply_handler() branches away before
the credit clamp, so a reply that matches no pending request reaches
out_post carrying the raw credit value parsed from the wire.
rpcrdma_post_recvs() does not bound its @needed argument: the refill
loop allocates and chains Receive WRs until the count is satisfied or
allocation fails. A peer that sends a well-formed reply carrying an
unknown XID and an inflated credit grant therefore drives rep
allocation and Receive posting past re_max_requests on every such
reply.
Move the clamp to immediately after the credit field is parsed,
ahead of the first branch that can reach out_post, so every later
consumer sees a sanitized value. The cwnd update stays on the
matched-request path. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: Fix dev use-after-free in xfrm async resumption
xfrm async resumption hold skb->dev refcnt until after transport_finish.
However, xfrm_rcv_cb may modify skb->dev to tunnel dev without taking
device reference, such as vti_rcv_cb. The subsequent async resumption
will decrement the tunnel device's reference count, which lead to uaf
of tunnel dev and refcnt leak of orig dev as below:
unregister_netdevice: waiting for vti1 to become free. Usage count = -2
Stash the original skb->dev to fix refcnt imbalance. The new skb->dev set
by xfrm_rcv_cb can race with device teardown. Extend rcu protection over
xfrm_rcv_cb and transport_finish to prevent races. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix race in unix socket mediation when peer_path is used
The holding a reference to the peer_sk is not enough to ensure access
to the peer sk path. Accessing the path outside of the state lock
allows for a race with unix_release_sock(). Fix this by taking the
state lock and getting a reference to the path under lock.
Ideally for connected sockets we would cache this information so we
don't have to take the lock here. But for now just fix the race. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: check label build before no_new_privs test
aa_change_profile() builds a replacement label with
fn_label_build_in_scope() before the no_new_privs subset check. The build
helper can fail and return NULL or an ERR_PTR, but the result was passed
to aa_label_is_unconfined_subset() before the existing IS_ERR_OR_NULL()
check.
Reuse the existing target-label build failure handling immediately after
the build. This preserves the current audit handling while preventing the
subset helper from dereferencing an invalid label. |
