| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: fix the SCO setup context lifetime
hci_setup_sync() queues a conn_handle_t with a NULL destroy callback, so
the context is only freed if hci_enhanced_setup_sync() actually runs. An
entry that is cancelled instead is leaked, as
_hci_cmd_sync_cancel_entry() does not release entry->data when there is
no destroy callback, and hci_cmd_sync_clear() cancels every pending entry
when the controller is unregistered.
The context also stores a bare hci_conn pointer, so the connection can be
freed while the work is queued. The dequeue in hci_conn_del() does not
cover it either, as it matches on entry->data == conn and entry->data is
the wrapper here. Same problem as commit 2f5d635ad590 ("Bluetooth:
hci_sync: hold conn in hci_connect_acl/le_sync() callbacks").
Hold the connection and release both from a destroy callback. The
submission failure path drops both, since hci_cmd_sync_submit() does not
call the destroy callback when it fails to queue. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: free the advertising instance on the failure and cancel paths
adv_timeout_expire() hands a kmalloc()ed instance byte to
hci_cmd_sync_queue() with a NULL destroy callback, and only
adv_timeout_expire_sync() frees it. That leaks on two paths:
- the return value is not checked, and hci_cmd_sync_queue() does not
take ownership when it fails (-ENETDOWN, -ENODEV, -ENOMEM);
- a cancelled entry is not released, as _hci_cmd_sync_cancel_entry()
does not free entry->data when there is no destroy callback.
hci_cmd_sync_clear() cancels every pending entry when the controller
is unregistered.
Free the buffer from a destroy callback, and in the caller when the entry
could not be queued at all. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: free the mesh send cancel command when it is cancelled
mesh_send_cancel() queues the pending command with a NULL destroy
callback, so it is only freed if send_cancel() runs. A cancelled entry is
leaked, as _hci_cmd_sync_cancel_entry() does not release entry->data when
there is no destroy callback, and hci_cmd_sync_clear() cancels every
pending entry when the controller is unregistered. Nothing else reclaims
it either: mgmt_pending_new() does not put the command on
hdev->mgmt_pending.
The leak also pins the socket reference taken by mgmt_pending_new(), so
the mgmt socket is never released.
Free the command from a destroy callback. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: free the HCI command when it is cancelled
mgmt_hci_cmd_sync() queues the pending command with a NULL destroy
callback, so it is only freed if send_hci_cmd_sync() runs. A cancelled
entry is leaked, as _hci_cmd_sync_cancel_entry() does not release
entry->data when there is no destroy callback, and hci_cmd_sync_clear()
cancels every pending entry when the controller is unregistered. Nothing
else reclaims it either: mgmt_pending_new() does not put the command on
hdev->mgmt_pending.
The leak also pins the socket reference taken by mgmt_pending_new(), so
the mgmt socket is never released.
Free the command from a destroy callback. The now-empty done label is
replaced by a direct return. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MSFT: validate evt_prefix_len against the response length
read_supported_features() only checks that the response covers the fixed
part of struct msft_rp_read_supported_features, which is 11 bytes:
if (skb->len < sizeof(*rp)) {
bt_dev_err(hdev, "MSFT supported features length mismatch");
goto failed;
}
evt_prefix[] is a flexible array member and rp->evt_prefix_len is an
unvalidated u8 taken straight out of that response, so
msft->evt_prefix = kmemdup(rp->evt_prefix, rp->evt_prefix_len,
GFP_KERNEL);
copies up to 255 bytes from a reply that may have carried none of them.
What is copied is data the controller never sent, and it is then used to
match incoming vendor events in msft_vendor_evt().
This is not an out-of-bounds access. An skb data allocation always has
at least SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) bytes past the
payload, which is more than the 255 byte maximum, so the read stays
inside the allocation and KASAN does not report it. It is still a read
of bytes the host was never given, with the length fully controlled by
the controller.
Reject a response that is too short for the prefix it declares.
Verified with an emulated controller over /dev/vhci on a KASAN kernel,
with vhci made to advertise an MSFT opcode the way btintel, btqca, btmtk
and btrtl do unconditionally. A reply of exactly 11 bytes declaring
evt_prefix_len = 255 reaches kmemdup and copies 255 bytes
("skb->len=11 evt_prefix_len=255", with the copied buffer dumped); since
the reply ends at the fixed part, all 255 come from past the end of the
response. No KASAN report is produced, as expected from the allocation
slack described above. With this patch the response is rejected with
"MSFT event prefix length mismatch" and msft->evt_prefix is left unset. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, cgroup: Fix storage null-ptr-deref after replacing prog
Syzkaller reported a storage null-ptr-deref issue after replacing prog.
This occurs in the following scenario:
1. prog A, an empty prog, is attached to a cgrp.
2. prog B uses BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE and calls the
bpf_get_local_storage helper.
3. link_update is called to replace prog A with prog B.
The reason is that __cgroup_bpf_replace fails to alloc and assign the
required cgrp storage for the incoming replacement prog. Consequently,
the new prog inherits an uninit storage, leading to null-ptr-deref panic
when kick the new prog.
Fix this by rejecting a link update if new_prog's cgroup storage is
incompatible with link->prog. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: gp2ap002: Fix unbalanced runtime PM on repeated event writes
The IIO core does not filter duplicate writes to the event enable
attribute, so writing the same value twice invokes
write_event_config() twice. Enabling twice leaks a runtime PM
reference, preventing the device from ever suspending again;
disabling twice underflows the usage count and triggers a
"Runtime PM usage count underflow" warning.
Bail out early when the requested state matches the current state.
While at it, switch to pm_runtime_resume_and_get() so a failed
resume is propagated to userspace instead of silently marking the
event enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_api: fix teardown of an adopted proto on insert-race loss
In tc_new_tfilter() the create branch sets tp_created = 1 before calling
tcf_chain_tp_insert_unique(). When the caller loses the race (another
request inserted a proto at the same chain/prio first), insert_unique()
destroys the caller's own tp_new and returns the winner's proto with an
extra reference. tp_created was never cleared, so the loser's errout
path treated the winner's live proto as its own and called
tcf_chain_tp_delete_empty() on it, silently unlinking an active
classifier that the winning request already advertised via
RTM_NEWTFILTER.
Track the outcome of the insert step in a single tri-state variable so
each errout path reacts correctly:
- TP_NOT_CREATED: no proto created; pursue the old path.
- TP_CREATED: proto inserted successfully; same code path as before.
- TP_NOT_OWNED: New - lost the insert race; tp is another request's proto
(chain ref already released by tp_new's destroy)
Both errout reactions are single expressions derived from the state.
This fix is motivated by the Sashiko's automated review of Patch
(net/sched: cls_api: Always acquire rtnl_lock when destroying locked
classifiers) [1][2]. The review identified the silent-unlink behaviour of
an adopted proto's teardown when a request loses the
tcf_chain_tp_insert_unique() race.
[1] https://sashiko.dev/#/patchset/20260801125632.360365-1-jhs%40mojatatu.com
[2] https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260801125632.360365-1-jhs%40mojatatu.com |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix mmap_lock leak in irq_work path
stack_map_get_build_id_offset() introduced a per-CPU irq_work to defer
mmap_read_unlock() from NMI context, and bpf_find_vma() later reused the
same mmap_unlock_work. Both callers only check whether the work is busy
before taking mmap_lock, so a nested caller can reuse the slot before the
first caller queues it. Two read locks may then be acquired while only one
deferred unlock runs, leaking a read lock and blocking exit_mmap().
Reserve the per-CPU slot before mmap_read_trylock(). Use the same wrapper
in stackmap and bpf_find_vma() so both callers release the reservation on
trylock failure. Keep rejecting the slot while the irq_work remains busy.
Release it after the irq_work callback unlocks the mm. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix integer overflow in verify_tags() bounds check
verify_tags() validates the tagset table unpacked from a policy blob.
For each set it reads a count and checks that advancing the index by
that count stays inside sets.table[]:
u32 cnt = tags->sets.table[i];
if (i+cnt >= tags->sets.size) {
i, cnt and sets.size are all u32, so i+cnt is evaluated modulo 2^32.
sets.table[] is filled by unpack_tagsets() with aa_unpack_u32(), so
every entry is a raw unbounded 32-bit word taken from the policy blob,
and verify_tags() is the function that is supposed to validate it. A
count close to U32_MAX makes the sum wrap to a small value, the guard
passes, and the inner loop then walks sets.table[++i] past the end of
the kcalloc(size, sizeof(u32)) allocation.
Note that sets.size is bounded by 65535, because unpack_tagsets() reads
it with aa_unpack_array() as a u16, so the wrap cannot be reached by
growing the table; it is reached purely through the attacker-supplied
count.
With sets.size = 2 and sets.table = { 0, 0xffffffff }:
i = 0: cnt = 0, guard 0 + 0 >= 2 is false, inner loop does not run
i = 1: cnt = 0xffffffff, guard (1 + 0xffffffff) mod 2^32 == 0 >= 2 is
false, so the guard is bypassed and the inner loop reads
sets.table[2] -- one element past a two element allocation
The walk continues until an out-of-bounds value happens to be >=
hdrs.size or the access faults, so a crafted policy yields an
out-of-bounds read on the policy load path
(aa_replace_profiles -> aa_unpack -> unpack_policydb -> unpack_tags ->
verify_tags). unpack_tags() runs before the perms and DFA tables are
unpacked, so no other table needs to be well formed to reach it.
Policy load is gated by aa_may_manage_policy(), which checks
CAP_MAC_ADMIN relative to the subject's own user namespace rather than
the init user namespace, so with the default
unprivileged_userns_apparmor_policy=1 the path is reachable from an
unprivileged task in a matched-level nested namespace, not only by a
globally privileged one.
Perform the addition in u64 so that it cannot wrap, restoring the
intended i + cnt < sets.size guarantee. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: kyro: Validate overlay viewport coordinates
The overlay viewport end coordinates are computed from the viewport
origin and dimensions using 32-bit unsigned arithmetic. Large input
values can cause these calculations to wrap around before the resulting
coordinates are passed to SetOverlayViewPort().
SetOverlayViewPort() packs the viewport coordinates into 16-bit
register fields. The X coordinates are additionally adjusted by +2
and +1 before being written. Validate the coordinate calculations
for 32-bit wraparound and ensure that the adjusted coordinates fit
within their 16-bit register fields before calling
SetOverlayViewPort().
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/dma: Restore locking around msi_page_list
Unlike a group's default domain, which is always freshly allocated
and privately owned (iommu_group_alloc_default_domain()), VFIO type1's
legacy container merges any newly attached group into an existing
domain whenever their iommu_ops and cache-coherency enforcement match.
iommu_dma_get_msi_page() only asserts the caller's own group mutex is
held (iommu_group_mutex_assert()). On an IOMMU that publishes
IOMMU_RESV_SW_MSI, e.g. ARM SMMU, a VM with two such devices assigned
through the legacy container can have their guest drivers probe and
allocate MSIs in parallel; each host-side VFIO_DEVICE_SET_IRQS lands
on a different device fd and group mutex, but both devices' domains
are the same merged domain, so both can enter
iommu_dma_get_msi_page() concurrently and corrupt msi_page_list.
commit 288683c92b1a ("iommu: Make iommu_dma_prepare_msi() into a
generic operation") dropped the prior msi_prepare_lock on the
reasoning that "each iommu_domain is unique to a group," which holds
for default domains but not this VFIO type1 case. Restore the static
lock, since it's only guarding a corner case and will likely never
be contended.
iommufd avoids the equivalent problem by having its own callers
(iommufd_sw_map_msi()) take a ctx-wide sw_msi_lock before ever
reaching the shared list. VFIO type1 can't mirror that since it
dispatches to iommu_dma_sw_msi() which is outside VFIO's jurisdiction. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Clear Present bit before tearing down copied context entry
copied_context_tear_down() zeroes the 128-bit context entry with
context_clear_entry() while the Present bit is still set, and only then
issues the context-cache and IOTLB invalidations. This leaves a window
in which hardware can fetch a torn entry, with some fields already zeroed
while Present is still set, leading to unpredictable behaviour or
spurious faults. While x86 provides strong write ordering, the compiler
may reorder the writes to the two 64-bit halves of the entry, and the
hardware fetch is not guaranteed to be atomic with respect to multiple
CPU writes.
There is no cacheline flush before the invalidation either, so on an
IOMMU without coherent access to the context table the zeroed entry may
not be visible to hardware at the point the invalidation is submitted.
Apply the same ownership handshake described in the VT-d spec, Section
6.5.3.3 ("Guidance to Software for Invalidations"): clear only the Present
bit, flush it out to the IOMMU, perform the invalidations, and only then
zero the remainder of the entry. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Fix iopf_refcount leak on RID domain replacement
intel_iommu_attach_device() enables IOPF for the new domain but never
disables it for the old one. device_block_translation(), called at the
start of the function, tears down translation but does not touch any IOPF
state; blocking_domain_attach_dev() has to call iopf_for_domain_remove()
explicitly before invoking it for exactly this reason.
identity_domain_attach_dev() has the same problem. Its comment claims
that no PRI handling is needed because the device has been put in the
blocking state, but the blocking state and the IOPF reference count are
independent of each other.
As a result, replacing a domain that has an iopf_handler with another
domain at RID level leaks a reference in info->iopf_refcount. The count
never drops back to zero, so iopf_queue_remove_device() is never called
and iommu_disable_pci_pri() triggers its WARN_ON(info->iopf_refcount)
when the device is released.
The PASID paths already handle this correctly by way of
iopf_for_domain_replace(); convert the two RID paths to do the same.
Using the replace helper rather than a bare remove keeps the enable
before the disable, so the reference count does not transiently reach
zero and evict the device from the IOPF queue. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Tear down scalable-mode context on probe failure
intel_pasid_setup_sm_context() walks a PCI device’s DMA aliases via
pci_for_each_dma_alias() and programs a scalable-mode context entry for
each RID. For a device with a dma_alias_mask, the callback is invoked
once for the device’s own RID and once for each alias bit, all with the
same pci_dev, so device_pasid_table_setup() runs for multiple RIDs.
pci_for_each_dma_alias() stops at the first callback error. Therefore, a
failure partway through the walk can leave context entries for already
processed RIDs present and still pointing to the device’s PASID table.
On this error path, intel_iommu_probe_device() currently jumps directly
to intel_pasid_free_table(), which frees the PASID table without
first tearing down those context entries. The IOMMU may then walk a
present context entry whose PASID table pointer references freed
memory.
intel_iommu_release_device() already performs teardown before freeing the
table. Apply the same ordering on the probe failure path.
device_pasid_table_teardown() safely handles RIDs that were never
programmed: iommu_context_addr() returns NULL when no context table has
been allocated, and clearing the Present bit of an already non-present
entry is a no-op. So unwind is safe for both the alias that failed and
any aliases not yet reached. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Flush context cache with correct SID when tearing down aliases
domain_context_clear_one() and device_pasid_table_teardown() are both
invoked once per DMA alias of a device. Each function locates the context
entry using the bus/devfn pair provided by the pci_for_each_dma_alias()
callback, then calls intel_context_flush_no_pasid(), which constructs a
device-selective context-cache invalidation from info->bus and
info->devfn (that is, always the requester ID of the device itself).
As a result, for every alias other than the device’s own RID, the context
entry that was just cleared in memory is never invalidated in the context
cache. Hardware may continue using that stale cached entry. In the
scalable-mode teardown path, intel_pasid_free_table() can then free the
PASID directory still referenced by that stale entry, allowing the IOMMU
to walk freed memory.
Fix this by passing the source ID of the entry being torn down to
intel_context_flush_no_pasid(), instead of deriving it from @info. |
| In the Linux kernel, the following vulnerability has been resolved:
media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
isp4if_alloc_fw_gpumem() allocates several GPU memory pools in sequence.
If one of them fails, it jumps to error_no_memory and returns -ENOMEM
without releasing the pools that were already allocated, leaking them.
Release the already-allocated pools before returning. isp4if_gpu_mem_free()
is a no-op on pools that were not allocated, so calling
isp4if_dealloc_fw_gpumem() here safely frees exactly the pools that
succeeded.
isp4if_gpu_mem_free() previously logged an error for a NULL entry, which
is a normal case during partial-allocation cleanup, so make it silent. |
| In the Linux kernel, the following vulnerability has been resolved:
media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
isp4sd_pwron_and_init() holds ops_mutex via guard(mutex) and, on any
init failure, jumps to err_deinit and calls isp4sd_pwroff_and_deinit().
That helper takes the same ops_mutex, re-acquiring a non-recursive mutex
already held by the current thread, so any init failure deadlocks.
Unwind the error path in stages instead, releasing only what each
failure point acquired. This also avoids the issues that an
unconditional teardown would hit at the earlier failures, such as a
runtime-PM underflow from pm_runtime_resume_and_get() and MMIO access
while the device is unpowered. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_ct: move custom expectation support to helper
Originally, the ct expectation support called nf_ct_helper_ext_add() for
confirmed conntracks, which is invalid, triggering a splat. This was
fixed by commit 1710eb913bdc ("netfilter: nft_ct: skip expectations for
confirmed conntrack") which restricted it to unconfirmed conntracks.
However, early insertion of expectations into the expectations list when
the conntrack is unconfirmed leads to stale entries pointing to the
wrong hlist_head through .pprev due to ct extension reallocation.
Commit 7c9664351980 ("netfilter: move nat hlist_head to nf_conn") moved
the nat hlist_head to nf_conn for this reason:
1. ...
2. When reallocation of extension area occurs we need to fixup the
bysource hash head via hlist_replace_rcu.
I'd rather not increase the size of the struct nf_conn for this feature
has very limited scope: only one expectation can be created at a time
given expect_clash() will make nf_ct_expect_related() reports EBUSY.
For this reason, relax nf_ct_expect_related() not to drop packets in
case expectation creation fails, therefore, expectation creation becomes
best effort.
To address this issue, add an internal ct helper and attach it to the
conntrack entry to streamline the custom ct expectation support with
existing ct helpers.
Expose a new nf_conntrack_helper_release() function to release the
internal helper that is allocated and attached to the conntrack entry to
create the custom expectations. The nft_ct module removal always waits
for rcu grace period, then the NULL helper callback is observed after
this.
This patch also restricts the creation of expectations to different
helpers other than this custom helper that is created for this type of
expectations. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Release the export reference when reaping open stateids
nfs4_put_stid() releases the svc_export tracked in
nfs4_stid.sc_export, but free_ol_stateid_reaplist() frees open and
lock stateids by calling ->sc_free() directly, bypassing that path.
An open stateid takes an sc_export reference in nfs4_open() and a
lock stateid takes its own in init_lock_stateid(); both reach
free_ol_stateid_reaplist() through their normal teardown, the open
stateid via release_open_stateid() and the lock stateid via
nfsd4_release_lockowner(), each through put_ol_stateid_locked().
The reference is therefore never dropped, pinning the export and
blocking unmount for the lifetime of the stateid.
Release sc_export in free_ol_stateid_reaplist() the way
nfs4_put_stid() does. ->sc_free() runs once per stateid, and a
stateid reaches free_ol_stateid_reaplist() or nfs4_put_stid() but
never both, so the reference is dropped exactly once. Revoked
stateids reach this path with sc_export already cleared by
drop_stid_export(), so they are skipped rather than double-freed.
nfs4_put_stid() itself read sc_export before acquiring cl_lock.
drop_stid_export() clears that field and releases the reference
under cl_lock, so a concurrent revocation could drop the export in
the window between the read and the final put, releasing the same
reference twice. Read sc_export while cl_lock is held so the two
paths serialize and the reference is released exactly once. |
