| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: ti: k3-udma-glue: Fix of_k3_udma_glue_parse_chn_by_id()
The of_k3_udma_glue_parse_chn_by_id() helper function erroneously
invokes "of_node_put()" on the "udmax_np" device-node passed to it,
without having incremented its reference count at any point. Fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Add check for srq max_sge attribute
max_sge attribute is passed by the user, and is inserted and used
unchecked, so verify that the value doesn't exceed maximum allowed value
before using it. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: xilinx: xdma: Fix data synchronisation in xdma_channel_isr()
Requests the vchan lock before using xdma->stop_request. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Revert "ACPICA: avoid Info: mapping multiple BARs. Your kernel is fine."
Undo the modifications made in commit d410ee5109a1 ("ACPICA: avoid
"Info: mapping multiple BARs. Your kernel is fine.""). The initial
purpose of this commit was to stop memory mappings for operation
regions from overlapping page boundaries, as it can trigger warnings
if different page attributes are present.
However, it was found that when this situation arises, mapping
continues until the boundary's end, but there is still an attempt to
read/write the entire length of the map, leading to a NULL pointer
deference. For example, if a four-byte mapping request is made but
only one byte is mapped because it hits the current page boundary's
end, a four-byte read/write attempt is still made, resulting in a NULL
pointer deference.
Instead, map the entire length, as the ACPI specification does not
mandate that it must be within the same page boundary. It is
permissible for it to be mapped across different regions. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: force a dst refcount before doing decryption
As it says in commit 3bc07321ccc2 ("xfrm: Force a dst refcount before
entering the xfrm type handlers"):
"Crypto requests might return asynchronous. In this case we leave the
rcu protected region, so force a refcount on the skb's destination
entry before we enter the xfrm type input/output handlers."
On TIPC decryption path it has the same problem, and skb_dst_force()
should be called before doing decryption to avoid a possible crash.
Shuang reported this issue when this warning is triggered:
[] WARNING: include/net/dst.h:337 tipc_sk_rcv+0x1055/0x1ea0 [tipc]
[] Kdump: loaded Tainted: G W --------- - - 4.18.0-496.el8.x86_64+debug
[] Workqueue: crypto cryptd_queue_worker
[] RIP: 0010:tipc_sk_rcv+0x1055/0x1ea0 [tipc]
[] Call Trace:
[] tipc_sk_mcast_rcv+0x548/0xea0 [tipc]
[] tipc_rcv+0xcf5/0x1060 [tipc]
[] tipc_aead_decrypt_done+0x215/0x2e0 [tipc]
[] cryptd_aead_crypt+0xdb/0x190
[] cryptd_queue_worker+0xed/0x190
[] process_one_work+0x93d/0x17e0 |
| In the Linux kernel, the following vulnerability has been resolved:
drop_monitor: replace spin_lock by raw_spin_lock
trace_drop_common() is called with preemption disabled, and it acquires
a spin_lock. This is problematic for RT kernels because spin_locks are
sleeping locks in this configuration, which causes the following splat:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 449, name: rcuc/47
preempt_count: 1, expected: 0
RCU nest depth: 2, expected: 2
5 locks held by rcuc/47/449:
#0: ff1100086ec30a60 ((softirq_ctrl.lock)){+.+.}-{2:2}, at: __local_bh_disable_ip+0x105/0x210
#1: ffffffffb394a280 (rcu_read_lock){....}-{1:2}, at: rt_spin_lock+0xbf/0x130
#2: ffffffffb394a280 (rcu_read_lock){....}-{1:2}, at: __local_bh_disable_ip+0x11c/0x210
#3: ffffffffb394a160 (rcu_callback){....}-{0:0}, at: rcu_do_batch+0x360/0xc70
#4: ff1100086ee07520 (&data->lock){+.+.}-{2:2}, at: trace_drop_common.constprop.0+0xb5/0x290
irq event stamp: 139909
hardirqs last enabled at (139908): [<ffffffffb1df2b33>] _raw_spin_unlock_irqrestore+0x63/0x80
hardirqs last disabled at (139909): [<ffffffffb19bd03d>] trace_drop_common.constprop.0+0x26d/0x290
softirqs last enabled at (139892): [<ffffffffb07a1083>] __local_bh_enable_ip+0x103/0x170
softirqs last disabled at (139898): [<ffffffffb0909b33>] rcu_cpu_kthread+0x93/0x1f0
Preemption disabled at:
[<ffffffffb1de786b>] rt_mutex_slowunlock+0xab/0x2e0
CPU: 47 PID: 449 Comm: rcuc/47 Not tainted 6.9.0-rc2-rt1+ #7
Hardware name: Dell Inc. PowerEdge R650/0Y2G81, BIOS 1.6.5 04/15/2022
Call Trace:
<TASK>
dump_stack_lvl+0x8c/0xd0
dump_stack+0x14/0x20
__might_resched+0x21e/0x2f0
rt_spin_lock+0x5e/0x130
? trace_drop_common.constprop.0+0xb5/0x290
? skb_queue_purge_reason.part.0+0x1bf/0x230
trace_drop_common.constprop.0+0xb5/0x290
? preempt_count_sub+0x1c/0xd0
? _raw_spin_unlock_irqrestore+0x4a/0x80
? __pfx_trace_drop_common.constprop.0+0x10/0x10
? rt_mutex_slowunlock+0x26a/0x2e0
? skb_queue_purge_reason.part.0+0x1bf/0x230
? __pfx_rt_mutex_slowunlock+0x10/0x10
? skb_queue_purge_reason.part.0+0x1bf/0x230
trace_kfree_skb_hit+0x15/0x20
trace_kfree_skb+0xe9/0x150
kfree_skb_reason+0x7b/0x110
skb_queue_purge_reason.part.0+0x1bf/0x230
? __pfx_skb_queue_purge_reason.part.0+0x10/0x10
? mark_lock.part.0+0x8a/0x520
...
trace_drop_common() also disables interrupts, but this is a minor issue
because we could easily replace it with a local_lock.
Replace the spin_lock with raw_spin_lock to avoid sleeping in atomic
context. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix kernel crash during resume
Currently during resume, QMI target memory is not properly handled, resulting
in kernel crash in case DMA remap is not supported:
BUG: Bad page state in process kworker/u16:54 pfn:36e80
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x36e80
page dumped because: nonzero _refcount
Call Trace:
bad_page
free_page_is_bad_report
__free_pages_ok
__free_pages
dma_direct_free
dma_free_attrs
ath12k_qmi_free_target_mem_chunk
ath12k_qmi_msg_mem_request_cb
The reason is:
Once ath12k module is loaded, firmware sends memory request to host. In case
DMA remap not supported, ath12k refuses the first request due to failure in
allocating with large segment size:
ath12k_pci 0000:04:00.0: qmi firmware request memory request
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 7077888
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 8454144
ath12k_pci 0000:04:00.0: qmi dma allocation failed (7077888 B type 1), will try later with small size
ath12k_pci 0000:04:00.0: qmi delays mem_request 2
ath12k_pci 0000:04:00.0: qmi firmware request memory request
Later firmware comes back with more but small segments and allocation
succeeds:
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 262144
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 65536
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
Now ath12k is working. If suspend is triggered, firmware will be reloaded
during resume. As same as before, firmware requests two large segments at
first. In ath12k_qmi_msg_mem_request_cb() segment count and size are
assigned:
ab->qmi.mem_seg_count == 2
ab->qmi.target_mem[0].size == 7077888
ab->qmi.target_mem[1].size == 8454144
Then allocation failed like before and ath12k_qmi_free_target_mem_chunk()
is called to free all allocated segments. Note the first segment is skipped
because its v.addr is cleared due to allocation failure:
chunk->v.addr = dma_alloc_coherent()
Also note that this leaks that segment because it has not been freed.
While freeing the second segment, a size of 8454144 is passed to
dma_free_coherent(). However remember that this segment is allocated at
the first time firmware is loaded, before suspend. So its real size is
524288, much smaller than 8454144. As a result kernel found we are freeing
some memory which is in use and thus cras
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: remove clear SB_INLINECRYPT flag in default_options
In f2fs_remount, SB_INLINECRYPT flag will be clear and re-set.
If create new file or open file during this gap, these files
will not use inlinecrypt. Worse case, it may lead to data
corruption if wrappedkey_v0 is enable.
Thread A: Thread B:
-f2fs_remount -f2fs_file_open or f2fs_new_inode
-default_options
<- clear SB_INLINECRYPT flag
-fscrypt_select_encryption_impl
-parse_options
<- set SB_INLINECRYPT again |
| In the Linux kernel, the following vulnerability has been resolved:
Avoid hw_desc array overrun in dw-axi-dmac
I have a use case where nr_buffers = 3 and in which each descriptor is composed by 3
segments, resulting in the DMA channel descs_allocated to be 9. Since axi_desc_put()
handles the hw_desc considering the descs_allocated, this scenario would result in a
kernel panic (hw_desc array will be overrun).
To fix this, the proposal is to add a new member to the axi_dma_desc structure,
where we keep the number of allocated hw_descs (axi_desc_alloc()) and use it in
axi_desc_put() to handle the hw_desc array correctly.
Additionally I propose to remove the axi_chan_start_first_queued() call after completing
the transfer, since it was identified that unbalance can occur (started descriptors can
be interrupted and transfer ignored due to DMA channel not being enabled). |
| In the Linux kernel, the following vulnerability has been resolved:
seg6: fix parameter passing when calling NF_HOOK() in End.DX4 and End.DX6 behaviors
input_action_end_dx4() and input_action_end_dx6() are called NF_HOOK() for
PREROUTING hook, in PREROUTING hook, we should passing a valid indev,
and a NULL outdev to NF_HOOK(), otherwise may trigger a NULL pointer
dereference, as below:
[74830.647293] BUG: kernel NULL pointer dereference, address: 0000000000000090
[74830.655633] #PF: supervisor read access in kernel mode
[74830.657888] #PF: error_code(0x0000) - not-present page
[74830.659500] PGD 0 P4D 0
[74830.660450] Oops: 0000 [#1] PREEMPT SMP PTI
...
[74830.664953] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[74830.666569] RIP: 0010:rpfilter_mt+0x44/0x15e [ipt_rpfilter]
...
[74830.689725] Call Trace:
[74830.690402] <IRQ>
[74830.690953] ? show_trace_log_lvl+0x1c4/0x2df
[74830.692020] ? show_trace_log_lvl+0x1c4/0x2df
[74830.693095] ? ipt_do_table+0x286/0x710 [ip_tables]
[74830.694275] ? __die_body.cold+0x8/0xd
[74830.695205] ? page_fault_oops+0xac/0x140
[74830.696244] ? exc_page_fault+0x62/0x150
[74830.697225] ? asm_exc_page_fault+0x22/0x30
[74830.698344] ? rpfilter_mt+0x44/0x15e [ipt_rpfilter]
[74830.699540] ipt_do_table+0x286/0x710 [ip_tables]
[74830.700758] ? ip6_route_input+0x19d/0x240
[74830.701752] nf_hook_slow+0x3f/0xb0
[74830.702678] input_action_end_dx4+0x19b/0x1e0
[74830.703735] ? input_action_end_t+0xe0/0xe0
[74830.704734] seg6_local_input_core+0x2d/0x60
[74830.705782] lwtunnel_input+0x5b/0xb0
[74830.706690] __netif_receive_skb_one_core+0x63/0xa0
[74830.707825] process_backlog+0x99/0x140
[74830.709538] __napi_poll+0x2c/0x160
[74830.710673] net_rx_action+0x296/0x350
[74830.711860] __do_softirq+0xcb/0x2ac
[74830.713049] do_softirq+0x63/0x90
input_action_end_dx4() passing a NULL indev to NF_HOOK(), and finally
trigger a NULL dereference in rpfilter_mt()->rpfilter_is_loopback():
static bool
rpfilter_is_loopback(const struct sk_buff *skb,
const struct net_device *in)
{
// in is NULL
return skb->pkt_type == PACKET_LOOPBACK ||
in->flags & IFF_LOOPBACK;
} |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: Fix a data race on last_boosted_vcpu in kvm_vcpu_on_spin()
Use {READ,WRITE}_ONCE() to access kvm->last_boosted_vcpu to ensure the
loads and stores are atomic. In the extremely unlikely scenario the
compiler tears the stores, it's theoretically possible for KVM to attempt
to get a vCPU using an out-of-bounds index, e.g. if the write is split
into multiple 8-bit stores, and is paired with a 32-bit load on a VM with
257 vCPUs:
CPU0 CPU1
last_boosted_vcpu = 0xff;
(last_boosted_vcpu = 0x100)
last_boosted_vcpu[15:8] = 0x01;
i = (last_boosted_vcpu = 0x1ff)
last_boosted_vcpu[7:0] = 0x00;
vcpu = kvm->vcpu_array[0x1ff];
As detected by KCSAN:
BUG: KCSAN: data-race in kvm_vcpu_on_spin [kvm] / kvm_vcpu_on_spin [kvm]
write to 0xffffc90025a92344 of 4 bytes by task 4340 on cpu 16:
kvm_vcpu_on_spin (arch/x86/kvm/../../../virt/kvm/kvm_main.c:4112) kvm
handle_pause (arch/x86/kvm/vmx/vmx.c:5929) kvm_intel
vmx_handle_exit (arch/x86/kvm/vmx/vmx.c:?
arch/x86/kvm/vmx/vmx.c:6606) kvm_intel
vcpu_run (arch/x86/kvm/x86.c:11107 arch/x86/kvm/x86.c:11211) kvm
kvm_arch_vcpu_ioctl_run (arch/x86/kvm/x86.c:?) kvm
kvm_vcpu_ioctl (arch/x86/kvm/../../../virt/kvm/kvm_main.c:?) kvm
__se_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:904 fs/ioctl.c:890)
__x64_sys_ioctl (fs/ioctl.c:890)
x64_sys_call (arch/x86/entry/syscall_64.c:33)
do_syscall_64 (arch/x86/entry/common.c:?)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
read to 0xffffc90025a92344 of 4 bytes by task 4342 on cpu 4:
kvm_vcpu_on_spin (arch/x86/kvm/../../../virt/kvm/kvm_main.c:4069) kvm
handle_pause (arch/x86/kvm/vmx/vmx.c:5929) kvm_intel
vmx_handle_exit (arch/x86/kvm/vmx/vmx.c:?
arch/x86/kvm/vmx/vmx.c:6606) kvm_intel
vcpu_run (arch/x86/kvm/x86.c:11107 arch/x86/kvm/x86.c:11211) kvm
kvm_arch_vcpu_ioctl_run (arch/x86/kvm/x86.c:?) kvm
kvm_vcpu_ioctl (arch/x86/kvm/../../../virt/kvm/kvm_main.c:?) kvm
__se_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:904 fs/ioctl.c:890)
__x64_sys_ioctl (fs/ioctl.c:890)
x64_sys_call (arch/x86/entry/syscall_64.c:33)
do_syscall_64 (arch/x86/entry/common.c:?)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
value changed: 0x00000012 -> 0x00000000 |
| In the Linux kernel, the following vulnerability has been resolved:
mm: shmem: fix getting incorrect lruvec when replacing a shmem folio
When testing shmem swapin, I encountered the warning below on my machine.
The reason is that replacing an old shmem folio with a new one causes
mem_cgroup_migrate() to clear the old folio's memcg data. As a result,
the old folio cannot get the correct memcg's lruvec needed to remove
itself from the LRU list when it is being freed. This could lead to
possible serious problems, such as LRU list crashes due to holding the
wrong LRU lock, and incorrect LRU statistics.
To fix this issue, we can fallback to use the mem_cgroup_replace_folio()
to replace the old shmem folio.
[ 5241.100311] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x5d9960
[ 5241.100317] head: order:4 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 5241.100319] flags: 0x17fffe0000040068(uptodate|lru|head|swapbacked|node=0|zone=2|lastcpupid=0x3ffff)
[ 5241.100323] raw: 17fffe0000040068 fffffdffd6687948 fffffdffd69ae008 0000000000000000
[ 5241.100325] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
[ 5241.100326] head: 17fffe0000040068 fffffdffd6687948 fffffdffd69ae008 0000000000000000
[ 5241.100327] head: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
[ 5241.100328] head: 17fffe0000000204 fffffdffd6665801 ffffffffffffffff 0000000000000000
[ 5241.100329] head: 0000000a00000010 0000000000000000 00000000ffffffff 0000000000000000
[ 5241.100330] page dumped because: VM_WARN_ON_ONCE_FOLIO(!memcg && !mem_cgroup_disabled())
[ 5241.100338] ------------[ cut here ]------------
[ 5241.100339] WARNING: CPU: 19 PID: 78402 at include/linux/memcontrol.h:775 folio_lruvec_lock_irqsave+0x140/0x150
[...]
[ 5241.100374] pc : folio_lruvec_lock_irqsave+0x140/0x150
[ 5241.100375] lr : folio_lruvec_lock_irqsave+0x138/0x150
[ 5241.100376] sp : ffff80008b38b930
[...]
[ 5241.100398] Call trace:
[ 5241.100399] folio_lruvec_lock_irqsave+0x140/0x150
[ 5241.100401] __page_cache_release+0x90/0x300
[ 5241.100404] __folio_put+0x50/0x108
[ 5241.100406] shmem_replace_folio+0x1b4/0x240
[ 5241.100409] shmem_swapin_folio+0x314/0x528
[ 5241.100411] shmem_get_folio_gfp+0x3b4/0x930
[ 5241.100412] shmem_fault+0x74/0x160
[ 5241.100414] __do_fault+0x40/0x218
[ 5241.100417] do_shared_fault+0x34/0x1b0
[ 5241.100419] do_fault+0x40/0x168
[ 5241.100420] handle_pte_fault+0x80/0x228
[ 5241.100422] __handle_mm_fault+0x1c4/0x440
[ 5241.100424] handle_mm_fault+0x60/0x1f0
[ 5241.100426] do_page_fault+0x120/0x488
[ 5241.100429] do_translation_fault+0x4c/0x68
[ 5241.100431] do_mem_abort+0x48/0xa0
[ 5241.100434] el0_da+0x38/0xc0
[ 5241.100436] el0t_64_sync_handler+0x68/0xc0
[ 5241.100437] el0t_64_sync+0x14c/0x150
[ 5241.100439] ---[ end trace 0000000000000000 ]---
[baolin.wang@linux.alibaba.com: remove less helpful comments, per Matthew] |
| In the Linux kernel, the following vulnerability has been resolved:
ima: Avoid blocking in RCU read-side critical section
A panic happens in ima_match_policy:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
PGD 42f873067 P4D 0
Oops: 0000 [#1] SMP NOPTI
CPU: 5 PID: 1286325 Comm: kubeletmonit.sh
Kdump: loaded Tainted: P
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 0.0.0 02/06/2015
RIP: 0010:ima_match_policy+0x84/0x450
Code: 49 89 fc 41 89 cf 31 ed 89 44 24 14 eb 1c 44 39
7b 18 74 26 41 83 ff 05 74 20 48 8b 1b 48 3b 1d
f2 b9 f4 00 0f 84 9c 01 00 00 <44> 85 73 10 74 ea
44 8b 6b 14 41 f6 c5 01 75 d4 41 f6 c5 02 74 0f
RSP: 0018:ff71570009e07a80 EFLAGS: 00010207
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000200
RDX: ffffffffad8dc7c0 RSI: 0000000024924925 RDI: ff3e27850dea2000
RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffffabfce739
R10: ff3e27810cc42400 R11: 0000000000000000 R12: ff3e2781825ef970
R13: 00000000ff3e2785 R14: 000000000000000c R15: 0000000000000001
FS: 00007f5195b51740(0000)
GS:ff3e278b12d40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 0000000626d24002 CR4: 0000000000361ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
ima_get_action+0x22/0x30
process_measurement+0xb0/0x830
? page_add_file_rmap+0x15/0x170
? alloc_set_pte+0x269/0x4c0
? prep_new_page+0x81/0x140
? simple_xattr_get+0x75/0xa0
? selinux_file_open+0x9d/0xf0
ima_file_check+0x64/0x90
path_openat+0x571/0x1720
do_filp_open+0x9b/0x110
? page_counter_try_charge+0x57/0xc0
? files_cgroup_alloc_fd+0x38/0x60
? __alloc_fd+0xd4/0x250
? do_sys_open+0x1bd/0x250
do_sys_open+0x1bd/0x250
do_syscall_64+0x5d/0x1d0
entry_SYSCALL_64_after_hwframe+0x65/0xca
Commit c7423dbdbc9e ("ima: Handle -ESTALE returned by
ima_filter_rule_match()") introduced call to ima_lsm_copy_rule within a
RCU read-side critical section which contains kmalloc with GFP_KERNEL.
This implies a possible sleep and violates limitations of RCU read-side
critical sections on non-PREEMPT systems.
Sleeping within RCU read-side critical section might cause
synchronize_rcu() returning early and break RCU protection, allowing a
UAF to happen.
The root cause of this issue could be described as follows:
| Thread A | Thread B |
| |ima_match_policy |
| | rcu_read_lock |
|ima_lsm_update_rule | |
| synchronize_rcu | |
| | kmalloc(GFP_KERNEL)|
| | sleep |
==> synchronize_rcu returns early
| kfree(entry) | |
| | entry = entry->next|
==> UAF happens and entry now becomes NULL (or could be anything).
| | entry->action |
==> Accessing entry might cause panic.
To fix this issue, we are converting all kmalloc that is called within
RCU read-side critical section to use GFP_ATOMIC.
[PM: fixed missing comment, long lines, !CONFIG_IMA_LSM_RULES case] |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix races between hole punching and AIO+DIO
After commit "ocfs2: return real error code in ocfs2_dio_wr_get_block",
fstests/generic/300 become from always failed to sometimes failed:
========================================================================
[ 473.293420 ] run fstests generic/300
[ 475.296983 ] JBD2: Ignoring recovery information on journal
[ 475.302473 ] ocfs2: Mounting device (253,1) on (node local, slot 0) with ordered data mode.
[ 494.290998 ] OCFS2: ERROR (device dm-1): ocfs2_change_extent_flag: Owner 5668 has an extent at cpos 78723 which can no longer be found
[ 494.291609 ] On-disk corruption discovered. Please run fsck.ocfs2 once the filesystem is unmounted.
[ 494.292018 ] OCFS2: File system is now read-only.
[ 494.292224 ] (kworker/19:11,2628,19):ocfs2_mark_extent_written:5272 ERROR: status = -30
[ 494.292602 ] (kworker/19:11,2628,19):ocfs2_dio_end_io_write:2374 ERROR: status = -3
fio: io_u error on file /mnt/scratch/racer: Read-only file system: write offset=460849152, buflen=131072
=========================================================================
In __blockdev_direct_IO, ocfs2_dio_wr_get_block is called to add unwritten
extents to a list. extents are also inserted into extent tree in
ocfs2_write_begin_nolock. Then another thread call fallocate to puch a
hole at one of the unwritten extent. The extent at cpos was removed by
ocfs2_remove_extent(). At end io worker thread, ocfs2_search_extent_list
found there is no such extent at the cpos.
T1 T2 T3
inode lock
...
insert extents
...
inode unlock
ocfs2_fallocate
__ocfs2_change_file_space
inode lock
lock ip_alloc_sem
ocfs2_remove_inode_range inode
ocfs2_remove_btree_range
ocfs2_remove_extent
^---remove the extent at cpos 78723
...
unlock ip_alloc_sem
inode unlock
ocfs2_dio_end_io
ocfs2_dio_end_io_write
lock ip_alloc_sem
ocfs2_mark_extent_written
ocfs2_change_extent_flag
ocfs2_search_extent_list
^---failed to find extent
...
unlock ip_alloc_sem
In most filesystems, fallocate is not compatible with racing with AIO+DIO,
so fix it by adding to wait for all dio before fallocate/punch_hole like
ext4. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: don't read past the mfuart notifcation
In case the firmware sends a notification that claims it has more data
than it has, we will read past that was allocated for the notification.
Remove the print of the buffer, we won't see it by default. If needed,
we can see the content with tracing.
This was reported by KFENCE. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: Clear napi->skb before dev_kfree_skb_any()
gve_rx_free_skb incorrectly leaves napi->skb referencing an skb after it
is freed with dev_kfree_skb_any(). This can result in a subsequent call
to napi_get_frags returning a dangling pointer.
Fix this by clearing napi->skb before the skb is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: validate HE operation element parsing
Validate that the HE operation element has the correct
length before parsing it. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: check n_ssids before accessing the ssids
In some versions of cfg80211, the ssids poinet might be a valid one even
though n_ssids is 0. Accessing the pointer in this case will cuase an
out-of-bound access. Fix this by checking n_ssids first. |
| In the Linux kernel, the following vulnerability has been resolved:
block: fix request.queuelist usage in flush
Friedrich Weber reported a kernel crash problem and bisected to commit
81ada09cc25e ("blk-flush: reuse rq queuelist in flush state machine").
The root cause is that we use "list_move_tail(&rq->queuelist, pending)"
in the PREFLUSH/POSTFLUSH sequences. But rq->queuelist.next == xxx since
it's popped out from plug->cached_rq in __blk_mq_alloc_requests_batch().
We don't initialize its queuelist just for this first request, although
the queuelist of all later popped requests will be initialized.
Fix it by changing to use "list_add_tail(&rq->queuelist, pending)" so
rq->queuelist doesn't need to be initialized. It should be ok since rq
can't be on any list when PREFLUSH or POSTFLUSH, has no move actually.
Please note the commit 81ada09cc25e ("blk-flush: reuse rq queuelist in
flush state machine") also has another requirement that no drivers would
touch rq->queuelist after blk_mq_end_request() since we will reuse it to
add rq to the post-flush pending list in POSTFLUSH. If this is not true,
we will have to revert that commit IMHO.
This updated version adds "list_del_init(&rq->queuelist)" in flush rq
callback since the dm layer may submit request of a weird invalid format
(REQ_FSEQ_PREFLUSH | REQ_FSEQ_POSTFLUSH), which causes double list_add
if without this "list_del_init(&rq->queuelist)". The weird invalid format
problem should be fixed in dm layer. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/dpt: Make DPT object unshrinkable
In some scenarios, the DPT object gets shrunk but
the actual framebuffer did not and thus its still
there on the DPT's vm->bound_list. Then it tries to
rewrite the PTEs via a stale CPU mapping. This causes panic.
[vsyrjala: Add TODO comment]
(cherry picked from commit 51064d471c53dcc8eddd2333c3f1c1d9131ba36c) |
