| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix NULL sock in aa_sock_file_perm
Deal with the potential that sock and sock-sk can be NULL during
socket setup or teardown. This could lead to an oops. The fix for NULL
pointer dereference in __unix_needs_revalidation shows this is at
least possible for af_unix sockets. While the fix for af_unix sockets
applies for newer mediation this is still the fall back path for older
af_unix mediation and other sockets, so ensure it is covered. |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: Fix slab-use-after-free in qd_put
Commit a475c5dd16e5 ("gfs2: Free quota data objects synchronously")
started freeing quota data objects during filesystem shutdown instead of
putting them back onto the LRU list, but it failed to remove these
objects from the LRU list, causing LRU list corruption. This caused
use-after-free when the shrinker (gfs2_qd_shrink_scan) tried to access
already-freed objects on the LRU list.
Fix this by removing qd objects from the LRU list before freeing them in
qd_put().
Initial fix from Deepanshu Kartikey <kartikey406@gmail.com>. |
| libusb before version 1.0.30 contains a NULL pointer dereference vulnerability that allows attackers to crash applications by supplying a malformed USB configuration descriptor where an interface claims bNumEndpoints greater than zero but is followed by a class-specific descriptor whose bLength exceeds the remaining buffer size, causing parse_interface() to return early without allocating the endpoint array. Attackers can exploit this flaw through libusb_get_active_config_descriptor or libusb_get_config_descriptor by providing crafted descriptors via virtualized USB passthrough, file-based descriptor parsing, or network sources, causing any application iterating over endpoints to dereference a NULL endpoint pointer and crash. |
| Improper neutralization of special elements used in a command ('command injection') in M365 Copilot allows an unauthorized attacker to disclose information over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/display/dp_mst: Add protection against 0 vcpi
When releasing a timeslot there is a slight chance we may end up
with the wrong payload mask due to overflow if the delayed_destroy_work
ends up coming into play after a DP 2.1 monitor gets disconnected
which causes vcpi to become 0 then we try to make the payload =
~BIT(vcpi - 1) which is a negative shift. VCPI id should never
really be 0 hence skip changing the payload mask if VCPI is 0.
Otherwise it leads to
<7> [515.287237] xe 0000:03:00.0: [drm:drm_dp_mst_get_port_malloc
[drm_display_helper]] port ffff888126ce9000 (3)
<4> [515.287267] -----------[ cut here ]-----------
<3> [515.287268] UBSAN: shift-out-of-bounds in
../drivers/gpu/drm/display/drm_dp_mst_topology.c:4575:36
<3> [515.287271] shift exponent -1 is negative
<4> [515.287275] CPU: 7 UID: 0 PID: 3108 Comm: kworker/u64:33 Tainted: G
S U 6.17.0-rc6-lgci-xe-xe-3795-3e79699fa1b216e92+ #1 PREEMPT(voluntary)
<4> [515.287279] Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER
<4> [515.287279] Hardware name: ASUS System Product Name/PRIME Z790-P
WIFI, BIOS 1645 03/15/2024
<4> [515.287281] Workqueue: drm_dp_mst_wq drm_dp_delayed_destroy_work
[drm_display_helper]
<4> [515.287303] Call Trace:
<4> [515.287304] <TASK>
<4> [515.287306] dump_stack_lvl+0xc1/0xf0
<4> [515.287313] dump_stack+0x10/0x20
<4> [515.287316] __ubsan_handle_shift_out_of_bounds+0x133/0x2e0
<4> [515.287324] ? drm_atomic_get_private_obj_state+0x186/0x1d0
<4> [515.287333] drm_dp_atomic_release_time_slots.cold+0x17/0x3d
[drm_display_helper]
<4> [515.287355] mst_connector_atomic_check+0x159/0x180 [xe]
<4> [515.287546] drm_atomic_helper_check_modeset+0x4d9/0xfa0
<4> [515.287550] ? __ww_mutex_lock.constprop.0+0x6f/0x1a60
<4> [515.287562] intel_atomic_check+0x119/0x2b80 [xe]
<4> [515.287740] ? find_held_lock+0x31/0x90
<4> [515.287747] ? lock_release+0xce/0x2a0
<4> [515.287754] drm_atomic_check_only+0x6a2/0xb40
<4> [515.287758] ? drm_atomic_add_affected_connectors+0x12b/0x140
<4> [515.287765] drm_atomic_commit+0x6e/0xf0
<4> [515.287766] ? _pfx__drm_printfn_info+0x10/0x10
<4> [515.287774] drm_client_modeset_commit_atomic+0x25c/0x2b0
<4> [515.287794] drm_client_modeset_commit_locked+0x60/0x1b0
<4> [515.287795] ? mutex_lock_nested+0x1b/0x30
<4> [515.287801] drm_client_modeset_commit+0x26/0x50
<4> [515.287804] __drm_fb_helper_restore_fbdev_mode_unlocked+0xdc/0x110
<4> [515.287810] drm_fb_helper_hotplug_event+0x120/0x140
<4> [515.287814] drm_fbdev_client_hotplug+0x28/0xd0
<4> [515.287819] drm_client_hotplug+0x6c/0xf0
<4> [515.287824] drm_client_dev_hotplug+0x9e/0xd0
<4> [515.287829] drm_kms_helper_hotplug_event+0x1a/0x30
<4> [515.287834] drm_dp_delayed_destroy_work+0x3df/0x410
[drm_display_helper]
<4> [515.287861] process_one_work+0x22b/0x6f0
<4> [515.287874] worker_thread+0x1e8/0x3d0
<4> [515.287879] ? __pfx_worker_thread+0x10/0x10
<4> [515.287882] kthread+0x11c/0x250
<4> [515.287886] ? __pfx_kthread+0x10/0x10
<4> [515.287890] ret_from_fork+0x2d7/0x310
<4> [515.287894] ? __pfx_kthread+0x10/0x10
<4> [515.287897] ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Fix NULL pointer dereference on panthor_fw_unplug
This patch removes the MCU halt and wait for halt procedures during
panthor_fw_unplug() as the MCU can be in a variety of states or the FW
may not even be loaded/initialized at all, the latter of which can lead
to a NULL pointer dereference.
It should be safe on unplug to just disable the MCU without waiting for
it to halt as it may not be able to. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: skip ipv6 extension headers for csum checks
Protocol checksum validation fails for IPv6 if there are extension
headers before the protocol header. iph->len already contains its
offset, so use it to fix the problem. |
| In the Linux kernel, the following vulnerability has been resolved:
ata: libata-scsi: avoid Non-NCQ command starvation
When a non-NCQ command is issued while NCQ commands are being executed,
ata_scsi_qc_issue() indicates to the SCSI layer that the command issuing
should be deferred by returning SCSI_MLQUEUE_XXX_BUSY. This command
deferring is correct and as mandated by the ACS specifications since
NCQ and non-NCQ commands cannot be mixed.
However, in the case of a host adapter using multiple submission queues,
when the target device is under a constant load of NCQ commands, there
are no guarantees that requeueing the non-NCQ command will be executed
later and it may be deferred again repeatedly as other submission queues
can constantly issue NCQ commands from different CPUs ahead of the
non-NCQ command. This can lead to very long delays for the execution of
non-NCQ commands, and even complete starvation for these commands in the
worst case scenario.
Since the block layer and the SCSI layer do not distinguish between
queueable (NCQ) and non queueable (non-NCQ) commands, libata-scsi SAT
implementation must ensure forward progress for non-NCQ commands in the
presence of NCQ command traffic. This is similar to what SAS HBAs with a
hardware/firmware based SAT implementation do.
Implement such forward progress guarantee by limiting requeueing of
non-NCQ commands from ata_scsi_qc_issue(): when a non-NCQ command is
received and NCQ commands are in-flight, do not force a requeue of the
non-NCQ command by returning SCSI_MLQUEUE_XXX_BUSY and instead return 0
to indicate that the command was accepted but hold on to the qc using
the new deferred_qc field of struct ata_port.
This deferred qc will be issued using the work item deferred_qc_work
running the function ata_scsi_deferred_qc_work() once all in-flight
commands complete, which is checked with the port qc_defer() callback
return value indicating that no further delay is necessary. This check
is done using the helper function ata_scsi_schedule_deferred_qc() which
is called from ata_scsi_qc_complete(). This thus excludes this mechanism
from all internal non-NCQ commands issued by ATA EH.
When a port deferred_qc is non NULL, that is, the port has a command
waiting for the device queue to drain, the issuing of all incoming
commands (both NCQ and non-NCQ) is deferred using the regular busy
mechanism. This simplifies the code and also avoids potential denial of
service problems if a user issues too many non-NCQ commands.
Finally, whenever ata EH is scheduled, regardless of the reason, a
deferred qc is always requeued so that it can be retried once EH
completes. This is done by calling the function
ata_scsi_requeue_deferred_qc() from ata_eh_set_pending(). This avoids
the need for any special processing for the deferred qc in case of NCQ
error, link or device reset, or device timeout. |
| Improper authentication in Azure Resource Manager (ARM) allows an unauthorized attacker to elevate privileges over a network. |
| Agent Zero before version 1.15 contains a stored cross-site scripting vulnerability that allows attackers to execute arbitrary JavaScript in the application origin by serving SVG files through the image_get API endpoint without Content-Security-Policy, X-Content-Type-Options, or Content-Disposition headers. Attackers can place a crafted SVG file containing script tags in any path readable by the agent-zero process and lure an authenticated user to the image_get endpoint, causing the browser to execute the malicious script, steal the csrf_token cookie, and perform unauthorized API calls on behalf of the victim. |
| Smartshop 1 contains a cross-site request forgery vulnerability that allows attackers to modify user profiles by tricking authenticated users into submitting malicious requests. Attackers can craft HTML forms targeting editprofile.php with hidden fields for email and password parameters that execute automatically when visited by an authenticated admin user. |
| userSpice 4.3.24 contains a cross-site scripting vulnerability that allows attackers to inject malicious scripts through the X-Forwarded-For HTTP header. Attackers can send crafted requests to the backup.php endpoint with XSS payloads in the X-Forwarded-For header that execute when administrators visit the audit log page. |
| Audiograbber 1.83 contains a local buffer overflow vulnerability that allows attackers to execute arbitrary code by exploiting structured exception handling mechanisms. Attackers can craft malicious input in the Interpret or Album fields that triggers a buffer overflow, overwriting SEH pointers and executing injected shellcode with application privileges. |
| Soroush IM Desktop App 0.17.0 contains an authentication bypass vulnerability that allows local attackers to remove passcodes by injecting pre-encrypted database entries using a constant encryption key. Attackers can inject malicious database records into the application's database files to unlock the client and access all stored data, chats, images, and files without knowing the original passcode. |
| NASA openVSP 3.16.1 contains a buffer overflow vulnerability that allows local attackers to crash the application by supplying an excessively long string in the geometry name field. Attackers can trigger a denial of service by pasting a 5000-byte payload into the name input field within the Geom browser pod addition interface. |
| SocuSoft DVD Photo Slideshow Professional 8.07 contains a stack-based buffer overflow vulnerability in the registration name field that allows local attackers to execute arbitrary code by exploiting structured exception handling. Attackers can craft a malicious text file with carefully constructed payload containing junk bytes, SEH chain overwrite, and shellcode, then paste the contents into the Registration Name field via Help > Register to trigger code execution. |
| GuardDog is a CLI tool to identify malicious PyPI packages. From 1.0.0 to 2.9.0, the programmatic remote project scanning path rewrites attacker-controlled repository URLs using a blind string replacement and then sends the caller's GitHub credentials with the resulting request. This allows an attacker who can influence the scanned repository URL to trigger SSRF and capture the GH_TOKEN used by GuardDog. This vulnerability is fixed in . |
| Collectric CMU 1.0 contains a boolean-based blind SQL injection vulnerability in the lang parameter that allows unauthenticated attackers to manipulate database queries during authentication. Attackers can inject SQL code through the lang parameter in login requests to extract sensitive information from the database using time-based blind techniques. |
| OpenKM 6.3.12 contains a local file inclusion vulnerability in the administrative scripting interface at /admin/Scripting that allows authenticated administrators to read arbitrary files by supplying an attacker-controlled filesystem path through the fsPath parameter with action=Load. Attackers can exploit this to access sensitive files including /etc/passwd, configuration files containing database credentials, and JVM keystores accessible to the OpenKM process. |
| Snipe-IT is an IT asset/license management system. Prior to 8.4.1, users with component view access could be impacted by an unescaped notes column, resulting in cross-site scripting (XSS). This vulnerability is fixed in 8.4.1. |
