| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Unauthorized use of Kyocera printers, allows all information stored in the Kyocera address book to be exported. The security measure that encrypts incoming data ian be bypassed with this vulnerability, allowing encrypted data to be decrypted. Passwords and other sensitive information can be obtained. This affects Kyocera Command Center RX TASKalfa 2552ci, TASKalfa 3252ci, TASKalfa 2553ci, TASKalfa 3253ci, TASKalfa 3554ci, TASKalfa 4052ci, TASKalfa 5052ci, TASKalfa 6052ci, TASKalfa 7052ci, TASKalfa 8052ci, TASKalfa 7353ci, TASKalfa 8353ci, TASKalfa 2554ci, TASKalfa 3254ci, TASKalfa 505. |
| A stack-based buffer overflow vulnerability in the RTSP service of Tenda CP3 V3.0 (firmware V31.1.9.91) allows an unauthenticated remote attacker to cause a denial of service via a crafted second SETUP request. After completing the OPTIONS, DESCRIBE, and a legitimate first SETUP request to obtain a valid session ID, the RTSP service's second-stage URL routing parser fails to validate the length of the URL field in the subsequent SETUP request. By supplying a URL consisting of exactly four consecutive repetitions of a valid RTSP URL, an attacker can bypass first-stage format validation and trigger a stack buffer overflow, causing an immediate crash of the RTSP service process and rendering the device inaccessible to all clients on the local network. |
| Tenda CP3 V3.0 firmware V31.1.9.91 does not validate the Content-Length header field in RTSP requests (including DESCRIBE, SETUP, and PLAY methods). When a request carrying a Content-Length header is received without a corresponding message body, the RTSP parser enters a persistent body-awaiting state, causing the affected TCP connection to become permanently non-functional. The device does not actively close the connection, resulting in a TCP resource leak. This issue can be exploited by an unauthenticated remote attacker to cause a denial-of-service condition. |
| A stack-based buffer overflow vulnerability in the RTSP service of Tenda CP3 V3.0 (firmware V31.1.9.91) allows an unauthenticated remote attacker to cause a denial of service via a crafted PLAY request. |
| A compromised or malicious BOSH Director can execute arbitrary shell commands on the operator's workstation when the operator runs bosh ssh (or bosh scp/bosh logs -f) with default flags.
Affected versions: BOSH CLI versions prior to 7.10.5. |
| The Fediverse Embeds WordPress plugin before 1.5.8 does not validate the destination of the server-side request performed by an unauthenticated media-proxying endpoint, allowing anonymous users to make the site fetch arbitrary URLs, including internal and private-network addresses, and read back the response body. This results in a full-read Server-Side Request Forgery and open proxy. |
| The Fediverse Embeds WordPress plugin before 1.5.8 does not validate the destination of the server-side request performed by an unauthenticated site-info endpoint before fetching it, allowing anonymous users (the gating nonce is exposed on public pages carrying an embed) to make the site request internal and private-network URLs and read back the parsed page metadata. This is a Server-Side Request Forgery. |
| During bosh create-env and bosh delete-env, the CLI uploads compiled CPI packages and rendered job templates to the new VM's DAV blobstore over HTTPS without verifying the server certificate, even though a CA certificate for that endpoint is available in the installation manifest. A network attacker can terminate the TLS connection, harvest the Basic-auth credentials, and read the rendered-templates archive containing every bootstrap secret for the new BOSH Director, then replay the credentials against the real VM's agent for root code execution.
Affected versions: bosh-cli versions prior to v7.10.4. |
| Use of a cryptographically weak random number generator in the GenerateRandomPassword function in bosh-windows-stemcell-builder allows a remote attacker to brute-force the resulting SSH login via TCP/22.
Affected versions: bosh-windows-stemcell-builder versions prior to v2019.98. |
| ProFTPD mod_sftp contains a heap-based buffer overflow reachable by an authenticated SFTP user. The fxp_packet_read() function accepts the attacker-supplied 32-bit big-endian SFTP packet length without a minimum sanity check. A value of 0 causes an unsigned subtraction elsewhere in the read path to underflow to approximately 4 GB. That oversized request reaches the core memory allocator, where the rounded size is computed in size_t but passed to new_block() as a 32-bit int; the low 32 bits of 0x100000000 are 0, so new_block() returns a small (~512-byte) block while the caller is told it received ~4 GB. The subsequent fill loop then streams attacker-controlled bytes past the end of the 544-byte allocation, producing an attacker-controlled heap buffer overflow. An authenticated user can crash the per-connection ProFTPD session child on demand with a single malformed SFTP packet (packet_len=0 followed by a body greater than approximately 544 bytes), producing reliable authenticated remote denial of service. Depending on heap layout and adjacent allocations, heap metadata corruption and further consequences beyond denial of service may be possible, though only denial of service is demonstrated by the supplied proof of concept. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: stub: Reject I2C block transfers with invalid length
The I2C_SMBUS_I2C_BLOCK_DATA case in stub_xfer() uses data->block[0]
as the transfer length. The existing check only clamps it to avoid
overrunning the chip->words[256] register array, but does not validate
it against I2C_SMBUS_BLOCK_MAX (32), which is the limit of the union
i2c_smbus_data.block buffer (34 bytes total). The driver is a
development/test tool (CONFIG_I2C_STUB=m, not built by default)
that must be loaded with a chip_addr= parameter.
A local user with access to /dev/i2c-* can issue an I2C_SMBUS ioctl
with I2C_SMBUS_I2C_BLOCK_DATA and data->block[0] > 32, causing
stub_xfer() to read or write past the end of the union
i2c_smbus_data.block buffer:
BUG: KASAN: stack-out-of-bounds in stub_xfer (drivers/i2c/i2c-stub.c:223)
Read of size 1 at addr ffff88800abcfd92 by task exploit/81
Call Trace:
<TASK>
stub_xfer (drivers/i2c/i2c-stub.c:223)
__i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:593)
i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:536)
i2cdev_ioctl_smbus (drivers/i2c/i2c-dev.c:391)
i2cdev_ioctl (drivers/i2c/i2c-dev.c:478)
__x64_sys_ioctl (fs/ioctl.c:583)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
The bug exists because i2c-stub implements .smbus_xfer directly,
bypassing the I2C_SMBUS_BLOCK_MAX validation in
i2c_smbus_xfer_emulated(). The I2C_SMBUS_BLOCK_DATA case in the same
function correctly validates against I2C_SMBUS_BLOCK_MAX, but the
I2C_SMBUS_I2C_BLOCK_DATA case does not.
Fix by rejecting transfers with data->block[0] == 0 or
data->block[0] > I2C_SMBUS_BLOCK_MAX with -EINVAL, consistent with
both the I2C_SMBUS_BLOCK_DATA case in the same function and the
I2C_SMBUS_I2C_BLOCK_DATA validation in i2c_smbus_xfer_emulated(). |
| The Kirki – Freeform Page Builder, Website Builder & Customizer plugin for WordPress is vulnerable to Directory Traversal in all versions up to, and including, 6.0.13 via the 'family' parameter. This makes it possible for authenticated attackers, with editor-level access and above, to delete arbitrary directories on the server, which can result in loss of data and availability. |
| The Fense Proxy & VPN Blocker plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check and missing nonce validation on the fense_bpvt_save_settings() function in versions up to, and including, 3.0.1. The callback is registered to both wp_ajax_* and wp_ajax_nopriv_* hooks and unconditionally calls delete_option() on four plugin options and delete_transient() on three transients tied to the plugin's API key cache and settings. This makes it possible for unauthenticated attackers to delete plugin options and transients, effectively resetting the plugin's API key/data cache and forcing the plugin to refetch state. |
| The Bricksforge plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 3.1.8.6. This is due to improper validation of the fieldIds parameter in the Pro Forms registration action, which allows attacker-supplied field IDs to be added to the trusted form-field whitelist. This makes it possible for unauthenticated attackers to register a new administrator account by submitting a crafted request to a publicly accessible Bricksforge Pro Forms registration form. Successful exploitation requires that the site has a public Bricksforge Pro Forms element configured with the User Registration action. |
| Grav before 2.0.4 contains a regular expression denial of service (ReDoS) vulnerability in the regex_replace filter and function, which are allowlisted in the Twig content sandbox. When Twig processing in page content is enabled (security.twig_content.process_enabled: true, disabled by default), an authenticated page editor can supply a catastrophically backtracking PCRE pattern that is passed directly to PHP's preg_replace(), causing unbounded CPU consumption and denial of service to the web server process. |
| The Grav API plugin (getgrav/grav-plugin-api) before 1.0.6 contains an authorization bypass: API keys can be created with a restricted scopes array, but the ApiKeyAuthenticator class never reads or enforces these scopes. It loads and returns the owning user's full account object, so a key created with limited scopes (e.g. read-only) can perform any write, delete, or administrative operation the owning user is authorized for. Fixed in 1.0.6. |
| OpenClaw versions before 2026.5.18 contain an authorization bypass vulnerability in skill command dispatch that allows lower-trust callers to execute or persist actions beyond their intended authorization. Attackers can bypass tool policy restrictions through configured input paths to perform unauthorized actions when the affected feature is enabled and reachable. |
| OpenClaw 2026.2.12 before 2026.5.26 contain an authorization bypass vulnerability in the hooks allowedAgentIds validation. A lower-trust caller or configured input path can bypass agent ID restrictions by submitting blank agent IDs, allowing actions that should require stronger authorization or policy checks. |
| Mettle SendPortal 3.0.1 and earlier contains a stored cross-site scripting (XSS) vulnerability in the template management functionality. The application fails to properly sanitize user-supplied input in the content parameter of the /templates endpoint, allowing an attacker to persistently inject malicious JavaScript code that is executed in the browsers of users who access the affected template. |
| The affected product accepts user-supplied input within a URL parameter without enforcing expected sanitization or encoding before rendering it within the response. This condition allows for the injection of malicious JavaScript payloads.
An attacker can leverage this vulnerability to cause the user's browser to redirect to a malicious website, modify the user interface of the webpage, or retrieve sensitive information from the browser. However, the impact is mitigated for session hijacking as all session-related sensitive cookies are protected by the httpOnly flag. |
