| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: honor XDP_TX_METADATA in zero-copy path
The zero-copy path reads TX metadata whenever the UMEM has metadata space,
even if the descriptor does not set XDP_TX_METADATA. Pass descriptor
options through the metadata helpers and ignore metadata unless the option
is set.
This does not fix the existing per-WQE metadata handling for mlx5 MPWQEs.
Only the descriptor that starts a session passes through
xsk_tx_metadata_request() and configures offload state shared by the batch.
Metadata on descriptors joining an open session is therefore not validated
and does not configure its requested offloads. In addition, a non-NULL
metadata pointer from such a descriptor is treated as a timestamp
completion request even when XDP_TXMD_FLAGS_TIMESTAMP is not set, so its
metadata union can be overwritten with an unrequested timestamp. Fixing
mixed metadata states within one MPWQE requires a separate change. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: properly decrypt filenames in vmalloc() buffers
The fscrypt subsystem uses the scatterlist crypto API, inheriting its
requirement that any buffers are in the linear mapping region. However,
the messenger client uses kvmalloc() to create buffers for messages,
which will occasionally place those buffers in the vmalloc() region when
physical memory fragmentation doesn't permit a large enough kmalloc().
The various callers of ceph_fname_to_usr() directly pass (slices of) raw
messages from the MDS without considering that the messages may be in
vmalloc() buffers, resulting in oopses especially on non-x86 platforms
(see 'Closes:' for more details and a reproducer).
Make ceph_fname_to_usr() explicitly tolerant of vmalloc()-allocated
fname->ctext, fname->name, and/or oname->name buffers, using `tname`
(which, when non-null, must be a linear address; when null, is briefly
allocated as necessary) as a bounce buffer to avoid passing any
inappropriate addresses to fscrypt_fname_disk_to_usr().
Additionally change parse_reply_info_readdir() -- the only function to
supply its own `tname` -- to follow the new "tname must never come from
vmalloc()" rule by passing NULL when the message is not in the linear
region. Though this causes a per-dentry kmalloc()+kfree(), this overhead
exists only when processing the minority of messages that spill into
vmalloc(). My (crude) testing puts this at only about 1 in 8,000 readdir
messages. Still, if the overhead proves unreasonable in the future, it
is easy enough to mitigate: a future change could allocate a bounce
buffer in parse_reply_info_readdir() and use that as `tname` instead. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nVM: Ensure INVVPID is emulated on the correct physical CPU
When emulating INVVPID, KVM executes INVVPID on the physical CPU using
vpid02 (instead of the L1 assigned VPID), after doing some validations
on the operands. However, it is possible that the physical CPU KVM
executes INVVPID on is different from the CPU L2 is running on.
For example, in the following scenario:
- L2 runs on CPU #1 and exits to L1 (vmx->nested.vmcs02.cpu=1)
- L1 migrates to CPU #2 and executes INVVPID
- KVM executes INVVPID on CPU #2
- L1 migrates back to CPU #1 and runs L2 (vmx->nested.vmcs02.cpu=1)
The TLB entries on CPU #1 are never invalidated, because INVVPID was
executed on CPU #2, and vmcs02 never ran on a different pCPU (i.e.
vmx_vcpu_load_vmcs() will *not* request KVM_REQ_TLB_FLUSH).
Ensure that INVVPID is being executed on the same pCPU that L2 last ran
on, and if not, fallback to clearing last_vpid=0 to trigger a full VPID
flush on the next nested VM-Enter (as KVM will detect L1 using a
different VPID for L2). If L2 ends up running on a different pCPU, KVM
will flush the TLB anyway through vmx_vcpu_load_vmcs(). |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/probes: Remove WARN_ON_ONCE from parse_btf_arg
Sashiko found that user can cause this WARN_ON_ONCE() easily
with adding a kprobe event based on a raw address with BTF
parameter.
Since this is not an unexpected condition, remove the
WARN_ON_ONCE(). |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus) Fix type confusion in notification logic
Sashiko reports:
At the start of the loop in pmbus_notify(), the code unconditionally casts
every attribute to a struct sensor_device_attribute:
drivers/hwmon/pmbus/pmbus_core.c:pmbus_notify() {
for (i = 0; i < data->num_attributes; i++) {
struct device_attribute *da = to_dev_attr(data->group.attrs[i]);
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
int index = attr->index;
...
}
However, data->group.attrs can contain other types like struct
pmbus_samples_reg or struct pmbus_sensor, which only embed a base
struct device_attribute.
If da is a struct pmbus_samples_reg, dev_attr is the last member. Casting
it to struct sensor_device_attribute and reading the index field appears
to access memory past the end of the allocation, which might trigger a
slab-out-of-bounds read.
Additionally, if da is a struct pmbus_sensor, casting it causes the index
field to overlap with the page, phase, and reg fields. Could this produce
a garbage mask on little-endian systems that spuriously matches the target
reg, page, and flags during an alert?
Fix the problem by using struct sensor_device_attr in struct pmbus_sensor
and struct pmbus_label. Since those attributes never trigger a
notification, set the value of attr->index to -1 for them. Use this value
to distinguish from boolean attributes which _can_ trigger a notification
and use the index field to encode mask, page, and register values. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: validate extension-frame layout before RX
Extension frames only have the extension header at the regular 802.11
header offset. The generic RX path can still reach helpers and interface
dispatch code that read regular header address fields before unsupported
extension subtypes are dropped.
mac80211 currently only handles S1G beacon extension frames. Drop other
extension subtypes before they can reach regular-header RX processing.
For S1G beacons, linearize the SKB with the management-frame path and
require the fixed S1G beacon header, including optional fixed fields
indicated by frame control, before generic RX dispatch.
Route S1G beacons through the station/default-link RX path without
regular-header station lookup. Avoid regular-header address reads in the
mac80211 RX paths that process S1G extension beacons, including
accept-frame, duplicate-detection, address-copy, and MLO
address-translation paths.
Also make ieee80211_get_bssid() length-safe before returning the S1G
source-address pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: don't send a 6E related command when not supported
MCC_ALLOWED_AP_TYPE_CMD is related to 6E support. Do not send it if the
device doesn't support 6E.
Apparently, the firmware is mistakenly advertising support for this
command even on AX201 which does not support 6E and then the firmware
crashes. |
| In the Linux kernel, the following vulnerability has been resolved:
virtiofs: use pages instead of pointer for kernel direct IO
When trying to insert a 10MB kernel module kept in a virtio-fs with cache
disabled, the following warning was reported:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 404 at mm/page_alloc.c:4551 ......
Modules linked in:
CPU: 1 PID: 404 Comm: insmod Not tainted 6.9.0-rc5+ #123
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ......
RIP: 0010:__alloc_pages+0x2bf/0x380
......
Call Trace:
<TASK>
? __warn+0x8e/0x150
? __alloc_pages+0x2bf/0x380
__kmalloc_large_node+0x86/0x160
__kmalloc+0x33c/0x480
virtio_fs_enqueue_req+0x240/0x6d0
virtio_fs_wake_pending_and_unlock+0x7f/0x190
queue_request_and_unlock+0x55/0x60
fuse_simple_request+0x152/0x2b0
fuse_direct_io+0x5d2/0x8c0
fuse_file_read_iter+0x121/0x160
__kernel_read+0x151/0x2d0
kernel_read+0x45/0x50
kernel_read_file+0x1a9/0x2a0
init_module_from_file+0x6a/0xe0
idempotent_init_module+0x175/0x230
__x64_sys_finit_module+0x5d/0xb0
x64_sys_call+0x1c3/0x9e0
do_syscall_64+0x3d/0xc0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
......
</TASK>
---[ end trace 0000000000000000 ]---
The warning is triggered as follows:
1) syscall finit_module() handles the module insertion and it invokes
kernel_read_file() to read the content of the module first.
2) kernel_read_file() allocates a 10MB buffer by using vmalloc() and
passes it to kernel_read(). kernel_read() constructs a kvec iter by
using iov_iter_kvec() and passes it to fuse_file_read_iter().
3) virtio-fs disables the cache, so fuse_file_read_iter() invokes
fuse_direct_io(). As for now, the maximal read size for kvec iter is
only limited by fc->max_read. For virtio-fs, max_read is UINT_MAX, so
fuse_direct_io() doesn't split the 10MB buffer. It saves the address and
the size of the 10MB-sized buffer in out_args[0] of a fuse request and
passes the fuse request to virtio_fs_wake_pending_and_unlock().
4) virtio_fs_wake_pending_and_unlock() uses virtio_fs_enqueue_req() to
queue the request. Because virtiofs need DMA-able address, so
virtio_fs_enqueue_req() uses kmalloc() to allocate a bounce buffer for
all fuse args, copies these args into the bounce buffer and passed the
physical address of the bounce buffer to virtiofsd. The total length of
these fuse args for the passed fuse request is about 10MB, so
copy_args_to_argbuf() invokes kmalloc() with a 10MB size parameter and
it triggers the warning in __alloc_pages():
if (WARN_ON_ONCE_GFP(order > MAX_PAGE_ORDER, gfp))
return NULL;
5) virtio_fs_enqueue_req() will retry the memory allocation in a
kworker, but it won't help, because kmalloc() will always return NULL
due to the abnormal size and finit_module() will hang forever.
A feasible solution is to limit the value of max_read for virtio-fs, so
the length passed to kmalloc() will be limited. However it will affect
the maximal read size for normal read. And for virtio-fs write initiated
from kernel, it has the similar problem but now there is no way to limit
fc->max_write in kernel.
So instead of limiting both the values of max_read and max_write in
kernel, introducing use_pages_for_kvec_io in fuse_conn and setting it as
true in virtiofs. When use_pages_for_kvec_io is enabled, fuse will use
pages instead of pointer to pass the KVEC_IO data.
After switching to pages for KVEC_IO data, these pages will be used for
DMA through virtio-fs. If these pages are backed by vmalloc(),
{flush|invalidate}_kernel_vmap_range() are necessary to flush or
invalidate the cache before the DMA operation. So add two new fields in
fuse_args_pages to record the base address of vmalloc area and the
condition indicating whether invalidation is needed. Perform the flush
in fuse_get_user_pages() for write operations and the invalidation in
fuse_release_user_pages() for read operations.
It may seem necessary to introduce another fie
---truncated--- |
| The Envira Gallery WordPress plugin before 1.16.2 does not verify that an image identifier added to a gallery refers to a media attachment the caller is permitted to view, allowing any user able to create and edit a gallery (Author and above by default) to disclose the title and excerpt of other users' private, draft, pending and trashed posts that WordPress would otherwise withhold from them. |
| The Click n Chat (Chat Widget Integration) WordPress plugin before 1.1.3 does not perform any authorization check on a lead-export handler, allowing unauthenticated users to download every captured contact record (names, email addresses and phone numbers). |
| Vulnerability in the Oracle Middleware Common Libraries and Tools product of Oracle Fusion Middleware (component: Remote Diagnostic Agent). Supported versions that are affected are 12.2.1.4.0 and 14.1.1.0.0. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Middleware Common Libraries and Tools. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle Middleware Common Libraries and Tools accessible data. CVSS 3.1 Base Score 3.7 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N). |
| Vulnerability in the Oracle Communications Billing and Revenue Management product of Oracle Communications (component: Platform). Supported versions that are affected are 15.0.0.0.0, 15.0.1.0.0, 15.1.0.0.0 and 15.2.0.0.0. Difficult to exploit vulnerability allows low privileged attacker with logon to the infrastructure where Oracle Communications Billing and Revenue Management executes to compromise Oracle Communications Billing and Revenue Management. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Communications Billing and Revenue Management accessible data. CVSS 3.1 Base Score 4.7 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:N). |
| Vulnerability in the iSupport product of Oracle E-Business Suite (component: Service Requests). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise iSupport. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all iSupport accessible data. CVSS 3.1 Base Score 6.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N). |
| CVE-2026-110926 has been marked as a duplicate of CVE-2026-106582. |
| Vulnerability in the Siebel CRM Cloud Applications product of Oracle Siebel CRM (component: Siebel Cloud Manager). Supported versions that are affected are 22.3-26.9. Difficult to exploit vulnerability allows unauthenticated attacker with network access via LDAP to compromise Siebel CRM Cloud Applications. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Siebel CRM Cloud Applications accessible data. CVSS 3.1 Base Score 5.9 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N). |
| Vulnerability in the Siebel CRM Cloud Applications product of Oracle Siebel CRM (component: Siebel Cloud Manager). Supported versions that are affected are 22.3-26.9. Difficult to exploit vulnerability allows unauthenticated attacker with access to the physical communication segment attached to the hardware where the Siebel CRM Cloud Applications executes to compromise Siebel CRM Cloud Applications. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Siebel CRM Cloud Applications accessible data. CVSS 3.1 Base Score 5.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:A/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N). |
| Vulnerability in the Siebel CRM Cloud Applications product of Oracle Siebel CRM (component: Siebel Cloud Manager). Supported versions that are affected are 22.3-26.9. Difficult to exploit vulnerability allows low privileged attacker with network access via HTTP to compromise Siebel CRM Cloud Applications. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Siebel CRM Cloud Applications accessible data. CVSS 3.1 Base Score 3.1 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:L/I:N/A:N). |
| Vulnerability in the Siebel CRM Cloud Applications product of Oracle Siebel CRM (component: Siebel Cloud Manager). Supported versions that are affected are 22.3-26.9. Easily exploitable vulnerability allows low privileged attacker with network access via LDAP to compromise Siebel CRM Cloud Applications. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Siebel CRM Cloud Applications accessible data. CVSS 3.1 Base Score 6.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N). |
| Vulnerability in Oracle Trusted Answer Search (component: PLSQL package). The supported version that is affected is 26.1. Easily exploitable vulnerability allows low privileged attacker with network access via Oracle Net to compromise Oracle Trusted Answer Search. While the vulnerability is in Oracle Trusted Answer Search, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Trusted Answer Search accessible data as well as unauthorized read access to a subset of Oracle Trusted Answer Search accessible data and unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Trusted Answer Search. CVSS 3.1 Base Score 9.9 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:L/I:H/A:H). |
| Vulnerability in Oracle Trusted Answer Search (component: PLSQL package). The supported version that is affected is 26.1. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Trusted Answer Search. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Trusted Answer Search accessible data. CVSS 3.1 Base Score 6.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N). |
