| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: initialise extack before use
Fix missing initialisation of extack in flow offload. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: only mark 'subflow' endp as available
Adding the following warning ...
WARN_ON_ONCE(msk->pm.local_addr_used == 0)
... before decrementing the local_addr_used counter helped to find a bug
when running the "remove single address" subtest from the mptcp_join.sh
selftests.
Removing a 'signal' endpoint will trigger the removal of all subflows
linked to this endpoint via mptcp_pm_nl_rm_addr_or_subflow() with
rm_type == MPTCP_MIB_RMSUBFLOW. This will decrement the local_addr_used
counter, which is wrong in this case because this counter is linked to
'subflow' endpoints, and here it is a 'signal' endpoint that is being
removed.
Now, the counter is decremented, only if the ID is being used outside
of mptcp_pm_nl_rm_addr_or_subflow(), only for 'subflow' endpoints, and
if the ID is not 0 -- local_addr_used is not taking into account these
ones. This marking of the ID as being available, and the decrement is
done no matter if a subflow using this ID is currently available,
because the subflow could have been closed before. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: only decrement add_addr_accepted for MPJ req
Adding the following warning ...
WARN_ON_ONCE(msk->pm.add_addr_accepted == 0)
... before decrementing the add_addr_accepted counter helped to find a
bug when running the "remove single subflow" subtest from the
mptcp_join.sh selftest.
Removing a 'subflow' endpoint will first trigger a RM_ADDR, then the
subflow closure. Before this patch, and upon the reception of the
RM_ADDR, the other peer will then try to decrement this
add_addr_accepted. That's not correct because the attached subflows have
not been created upon the reception of an ADD_ADDR.
A way to solve that is to decrement the counter only if the attached
subflow was an MP_JOIN to a remote id that was not 0, and initiated by
the host receiving the RM_ADDR. |
| In the Linux kernel, the following vulnerability has been resolved:
vfs: Don't evict inode under the inode lru traversing context
The inode reclaiming process(See function prune_icache_sb) collects all
reclaimable inodes and mark them with I_FREEING flag at first, at that
time, other processes will be stuck if they try getting these inodes
(See function find_inode_fast), then the reclaiming process destroy the
inodes by function dispose_list(). Some filesystems(eg. ext4 with
ea_inode feature, ubifs with xattr) may do inode lookup in the inode
evicting callback function, if the inode lookup is operated under the
inode lru traversing context, deadlock problems may happen.
Case 1: In function ext4_evict_inode(), the ea inode lookup could happen
if ea_inode feature is enabled, the lookup process will be stuck
under the evicting context like this:
1. File A has inode i_reg and an ea inode i_ea
2. getfattr(A, xattr_buf) // i_ea is added into lru // lru->i_ea
3. Then, following three processes running like this:
PA PB
echo 2 > /proc/sys/vm/drop_caches
shrink_slab
prune_dcache_sb
// i_reg is added into lru, lru->i_ea->i_reg
prune_icache_sb
list_lru_walk_one
inode_lru_isolate
i_ea->i_state |= I_FREEING // set inode state
inode_lru_isolate
__iget(i_reg)
spin_unlock(&i_reg->i_lock)
spin_unlock(lru_lock)
rm file A
i_reg->nlink = 0
iput(i_reg) // i_reg->nlink is 0, do evict
ext4_evict_inode
ext4_xattr_delete_inode
ext4_xattr_inode_dec_ref_all
ext4_xattr_inode_iget
ext4_iget(i_ea->i_ino)
iget_locked
find_inode_fast
__wait_on_freeing_inode(i_ea) ----→ AA deadlock
dispose_list // cannot be executed by prune_icache_sb
wake_up_bit(&i_ea->i_state)
Case 2: In deleted inode writing function ubifs_jnl_write_inode(), file
deleting process holds BASEHD's wbuf->io_mutex while getting the
xattr inode, which could race with inode reclaiming process(The
reclaiming process could try locking BASEHD's wbuf->io_mutex in
inode evicting function), then an ABBA deadlock problem would
happen as following:
1. File A has inode ia and a xattr(with inode ixa), regular file B has
inode ib and a xattr.
2. getfattr(A, xattr_buf) // ixa is added into lru // lru->ixa
3. Then, following three processes running like this:
PA PB PC
echo 2 > /proc/sys/vm/drop_caches
shrink_slab
prune_dcache_sb
// ib and ia are added into lru, lru->ixa->ib->ia
prune_icache_sb
list_lru_walk_one
inode_lru_isolate
ixa->i_state |= I_FREEING // set inode state
inode_lru_isolate
__iget(ib)
spin_unlock(&ib->i_lock)
spin_unlock(lru_lock)
rm file B
ib->nlink = 0
rm file A
iput(ia)
ubifs_evict_inode(ia)
ubifs_jnl_delete_inode(ia)
ubifs_jnl_write_inode(ia)
make_reservation(BASEHD) // Lock wbuf->io_mutex
ubifs_iget(ixa->i_ino)
iget_locked
find_inode_fast
__wait_on_freeing_inode(ixa)
| iput(ib) // ib->nlink is 0, do evict
| ubifs_evict_inode
| ubifs_jnl_delete_inode(ib)
↓ ubifs_jnl_write_inode
ABBA deadlock ←-----make_reservation(BASEHD)
dispose_list // cannot be executed by prune_icache_sb
wake_up_bit(&ixa->i_state)
Fix the possible deadlock by using new inode state flag I_LRU_ISOLATING
to pin the inode in memory while inode_lru_isolate(
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: hns3: fix a deadlock problem when config TC during resetting
When config TC during the reset process, may cause a deadlock, the flow is
as below:
pf reset start
│
▼
......
setup tc │
│ ▼
▼ DOWN: napi_disable()
napi_disable()(skip) │
│ │
▼ ▼
...... ......
│ │
▼ │
napi_enable() │
▼
UINIT: netif_napi_del()
│
▼
......
│
▼
INIT: netif_napi_add()
│
▼
...... global reset start
│ │
▼ ▼
UP: napi_enable()(skip) ......
│ │
▼ ▼
...... napi_disable()
In reset process, the driver will DOWN the port and then UINIT, in this
case, the setup tc process will UP the port before UINIT, so cause the
problem. Adds a DOWN process in UINIT to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/smt: Fix unbalance sched_smt_present dec/inc
I got the following warn report while doing stress test:
jump label: negative count!
WARNING: CPU: 3 PID: 38 at kernel/jump_label.c:263 static_key_slow_try_dec+0x9d/0xb0
Call Trace:
<TASK>
__static_key_slow_dec_cpuslocked+0x16/0x70
sched_cpu_deactivate+0x26e/0x2a0
cpuhp_invoke_callback+0x3ad/0x10d0
cpuhp_thread_fun+0x3f5/0x680
smpboot_thread_fn+0x56d/0x8d0
kthread+0x309/0x400
ret_from_fork+0x41/0x70
ret_from_fork_asm+0x1b/0x30
</TASK>
Because when cpuset_cpu_inactive() fails in sched_cpu_deactivate(),
the cpu offline failed, but sched_smt_present is decremented before
calling sched_cpu_deactivate(), it leads to unbalanced dec/inc, so
fix it by incrementing sched_smt_present in the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
parisc: fix a possible DMA corruption
ARCH_DMA_MINALIGN was defined as 16 - this is too small - it may be
possible that two unrelated 16-byte allocations share a cache line. If
one of these allocations is written using DMA and the other is written
using cached write, the value that was written with DMA may be
corrupted.
This commit changes ARCH_DMA_MINALIGN to be 128 on PA20 and 32 on PA1.1 -
that's the largest possible cache line size.
As different parisc microarchitectures have different cache line size, we
define arch_slab_minalign(), cache_line_size() and
dma_get_cache_alignment() so that the kernel may tune slab cache
parameters dynamically, based on the detected cache line size. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: Initialize beyond-EOF page contents before setting uptodate
fuse_notify_store(), unlike fuse_do_readpage(), does not enable page
zeroing (because it can be used to change partial page contents).
So fuse_notify_store() must be more careful to fully initialize page
contents (including parts of the page that are beyond end-of-file)
before marking the page uptodate.
The current code can leave beyond-EOF page contents uninitialized, which
makes these uninitialized page contents visible to userspace via mmap().
This is an information leak, but only affects systems which do not
enable init-on-alloc (via CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y or the
corresponding kernel command line parameter). |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: Fix shift-out-of-bounds in dbDiscardAG
When searching for the next smaller log2 block, BLKSTOL2() returned 0,
causing shift exponent -1 to be negative.
This patch fixes the issue by exiting the loop directly when negative
shift is found. |
| Passing a heavily nested list to sqlparse.parse() leads to a Denial of Service due to RecursionError.
|
| The “ipaddress” module contained incorrect information about whether certain IPv4 and IPv6 addresses were designated as “globally reachable” or “private”. This affected the is_private and is_global properties of the ipaddress.IPv4Address, ipaddress.IPv4Network, ipaddress.IPv6Address, and ipaddress.IPv6Network classes, where values wouldn’t be returned in accordance with the latest information from the IANA Special-Purpose Address Registries.
CPython 3.12.4 and 3.13.0a6 contain updated information from these registries and thus have the intended behavior. |
| A logic issue was addressed with improved checks. This issue is fixed in macOS Ventura 13.7.1, macOS Sequoia 15, macOS Sonoma 14.7.1. An application may be able to break out of its sandbox. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5: avoid BUG_ON() while continue reshape after reassembling
Currently, mdadm support --revert-reshape to abort the reshape while
reassembling, as the test 07revert-grow. However, following BUG_ON()
can be triggerred by the test:
kernel BUG at drivers/md/raid5.c:6278!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
irq event stamp: 158985
CPU: 6 PID: 891 Comm: md0_reshape Not tainted 6.9.0-03335-g7592a0b0049a #94
RIP: 0010:reshape_request+0x3f1/0xe60
Call Trace:
<TASK>
raid5_sync_request+0x43d/0x550
md_do_sync+0xb7a/0x2110
md_thread+0x294/0x2b0
kthread+0x147/0x1c0
ret_from_fork+0x59/0x70
ret_from_fork_asm+0x1a/0x30
</TASK>
Root cause is that --revert-reshape update the raid_disks from 5 to 4,
while reshape position is still set, and after reassembling the array,
reshape position will be read from super block, then during reshape the
checking of 'writepos' that is caculated by old reshape position will
fail.
Fix this panic the easy way first, by converting the BUG_ON() to
WARN_ON(), and stop the reshape if checkings fail.
Noted that mdadm must fix --revert-shape as well, and probably md/raid
should enhance metadata validation as well, however this means
reassemble will fail and there must be user tools to fix the wrong
metadata. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: Fix a deadlock in dma buf fence polling
Introduce a version of the fence ops that on release doesn't remove
the fence from the pending list, and thus doesn't require a lock to
fix poll->fence wait->fence unref deadlocks.
vmwgfx overwrites the wait callback to iterate over the list of all
fences and update their status, to do that it holds a lock to prevent
the list modifcations from other threads. The fence destroy callback
both deletes the fence and removes it from the list of pending
fences, for which it holds a lock.
dma buf polling cb unrefs a fence after it's been signaled: so the poll
calls the wait, which signals the fences, which are being destroyed.
The destruction tries to acquire the lock on the pending fences list
which it can never get because it's held by the wait from which it
was called.
Old bug, but not a lot of userspace apps were using dma-buf polling
interfaces. Fix those, in particular this fixes KDE stalls/deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: xilinx: rename cpu_number1 to dummy_cpu_number
The per cpu variable cpu_number1 is passed to xlnx_event_handler as
argument "dev_id", but it is not used in this function. So drop the
initialization of this variable and rename it to dummy_cpu_number.
This patch is to fix the following call trace when the kernel option
CONFIG_DEBUG_ATOMIC_SLEEP is enabled:
BUG: sleeping function called from invalid context at include/linux/sched/mm.h:274
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0
preempt_count: 1, expected: 0
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.0 #53
Hardware name: Xilinx Versal vmk180 Eval board rev1.1 (QSPI) (DT)
Call trace:
dump_backtrace+0xd0/0xe0
show_stack+0x18/0x40
dump_stack_lvl+0x7c/0xa0
dump_stack+0x18/0x34
__might_resched+0x10c/0x140
__might_sleep+0x4c/0xa0
__kmem_cache_alloc_node+0xf4/0x168
kmalloc_trace+0x28/0x38
__request_percpu_irq+0x74/0x138
xlnx_event_manager_probe+0xf8/0x298
platform_probe+0x68/0xd8 |
| In the Linux kernel, the following vulnerability has been resolved:
soc: qcom: pdr: protect locator_addr with the main mutex
If the service locator server is restarted fast enough, the PDR can
rewrite locator_addr fields concurrently. Protect them by placing
modification of those fields under the main pdr->lock. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_net: Fix napi_skb_cache_put warning
After the commit bdacf3e34945 ("net: Use nested-BH locking for
napi_alloc_cache.") was merged, the following warning began to appear:
WARNING: CPU: 5 PID: 1 at net/core/skbuff.c:1451 napi_skb_cache_put+0x82/0x4b0
__warn+0x12f/0x340
napi_skb_cache_put+0x82/0x4b0
napi_skb_cache_put+0x82/0x4b0
report_bug+0x165/0x370
handle_bug+0x3d/0x80
exc_invalid_op+0x1a/0x50
asm_exc_invalid_op+0x1a/0x20
__free_old_xmit+0x1c8/0x510
napi_skb_cache_put+0x82/0x4b0
__free_old_xmit+0x1c8/0x510
__free_old_xmit+0x1c8/0x510
__pfx___free_old_xmit+0x10/0x10
The issue arises because virtio is assuming it's running in NAPI context
even when it's not, such as in the netpoll case.
To resolve this, modify virtnet_poll_tx() to only set NAPI when budget
is available. Same for virtnet_poll_cleantx(), which always assumed that
it was in a NAPI context. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/uv: Don't call folio_wait_writeback() without a folio reference
folio_wait_writeback() requires that no spinlocks are held and that
a folio reference is held, as documented. After we dropped the PTL, the
folio could get freed concurrently. So grab a temporary reference. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "ALSA: firewire-lib: operate for period elapse event in process context"
Commit 7ba5ca32fe6e ("ALSA: firewire-lib: operate for period elapse event
in process context") removed the process context workqueue from
amdtp_domain_stream_pcm_pointer() and update_pcm_pointers() to remove
its overhead.
With RME Fireface 800, this lead to a regression since
Kernels 5.14.0, causing an AB/BA deadlock competition for the
substream lock with eventual system freeze under ALSA operation:
thread 0:
* (lock A) acquire substream lock by
snd_pcm_stream_lock_irq() in
snd_pcm_status64()
* (lock B) wait for tasklet to finish by calling
tasklet_unlock_spin_wait() in
tasklet_disable_in_atomic() in
ohci_flush_iso_completions() of ohci.c
thread 1:
* (lock B) enter tasklet
* (lock A) attempt to acquire substream lock,
waiting for it to be released:
snd_pcm_stream_lock_irqsave() in
snd_pcm_period_elapsed() in
update_pcm_pointers() in
process_ctx_payloads() in
process_rx_packets() of amdtp-stream.c
? tasklet_unlock_spin_wait
</NMI>
<TASK>
ohci_flush_iso_completions firewire_ohci
amdtp_domain_stream_pcm_pointer snd_firewire_lib
snd_pcm_update_hw_ptr0 snd_pcm
snd_pcm_status64 snd_pcm
? native_queued_spin_lock_slowpath
</NMI>
<IRQ>
_raw_spin_lock_irqsave
snd_pcm_period_elapsed snd_pcm
process_rx_packets snd_firewire_lib
irq_target_callback snd_firewire_lib
handle_it_packet firewire_ohci
context_tasklet firewire_ohci
Restore the process context work queue to prevent deadlock
AB/BA deadlock competition for ALSA substream lock of
snd_pcm_stream_lock_irq() in snd_pcm_status64()
and snd_pcm_stream_lock_irqsave() in snd_pcm_period_elapsed().
revert commit 7ba5ca32fe6e ("ALSA: firewire-lib: operate for period
elapse event in process context")
Replace inline description to prevent future deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix missing lock on sync reset reload
On sync reset reload work, when remote host updates devlink on reload
actions performed on that host, it misses taking devlink lock before
calling devlink_remote_reload_actions_performed() which results in
triggering lock assert like the following:
WARNING: CPU: 4 PID: 1164 at net/devlink/core.c:261 devl_assert_locked+0x3e/0x50
…
CPU: 4 PID: 1164 Comm: kworker/u96:6 Tainted: G S W 6.10.0-rc2+ #116
Hardware name: Supermicro SYS-2028TP-DECTR/X10DRT-PT, BIOS 2.0 12/18/2015
Workqueue: mlx5_fw_reset_events mlx5_sync_reset_reload_work [mlx5_core]
RIP: 0010:devl_assert_locked+0x3e/0x50
…
Call Trace:
<TASK>
? __warn+0xa4/0x210
? devl_assert_locked+0x3e/0x50
? report_bug+0x160/0x280
? handle_bug+0x3f/0x80
? exc_invalid_op+0x17/0x40
? asm_exc_invalid_op+0x1a/0x20
? devl_assert_locked+0x3e/0x50
devlink_notify+0x88/0x2b0
? mlx5_attach_device+0x20c/0x230 [mlx5_core]
? __pfx_devlink_notify+0x10/0x10
? process_one_work+0x4b6/0xbb0
process_one_work+0x4b6/0xbb0
[…] |
