| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mISDN: hfcpci: Fix warning when deleting uninitialized timer
With CONFIG_DEBUG_OBJECTS_TIMERS unloading hfcpci module leads
to the following splat:
[ 250.215892] ODEBUG: assert_init not available (active state 0) object: ffffffffc01a3dc0 object type: timer_list hint: 0x0
[ 250.217520] WARNING: CPU: 0 PID: 233 at lib/debugobjects.c:612 debug_print_object+0x1b6/0x2c0
[ 250.218775] Modules linked in: hfcpci(-) mISDN_core
[ 250.219537] CPU: 0 UID: 0 PID: 233 Comm: rmmod Not tainted 6.17.0-rc2-g6f713187ac98 #2 PREEMPT(voluntary)
[ 250.220940] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 250.222377] RIP: 0010:debug_print_object+0x1b6/0x2c0
[ 250.223131] Code: fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 75 4f 41 56 48 8b 14 dd a0 4e 01 9f 48 89 ee 48 c7 c7 20 46 01 9f e8 cb 84d
[ 250.225805] RSP: 0018:ffff888015ea7c08 EFLAGS: 00010286
[ 250.226608] RAX: 0000000000000000 RBX: 0000000000000005 RCX: ffffffff9be93a95
[ 250.227708] RDX: 1ffff1100d945138 RSI: 0000000000000008 RDI: ffff88806ca289c0
[ 250.228993] RBP: ffffffff9f014a00 R08: 0000000000000001 R09: ffffed1002bd4f39
[ 250.230043] R10: ffff888015ea79cf R11: 0000000000000001 R12: 0000000000000001
[ 250.231185] R13: ffffffff9eea0520 R14: 0000000000000000 R15: ffff888015ea7cc8
[ 250.232454] FS: 00007f3208f01540(0000) GS:ffff8880caf5a000(0000) knlGS:0000000000000000
[ 250.233851] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 250.234856] CR2: 00007f32090a7421 CR3: 0000000004d63000 CR4: 00000000000006f0
[ 250.236117] Call Trace:
[ 250.236599] <TASK>
[ 250.236967] ? trace_irq_enable.constprop.0+0xd4/0x130
[ 250.237920] debug_object_assert_init+0x1f6/0x310
[ 250.238762] ? __pfx_debug_object_assert_init+0x10/0x10
[ 250.239658] ? __lock_acquire+0xdea/0x1c70
[ 250.240369] __try_to_del_timer_sync+0x69/0x140
[ 250.241172] ? __pfx___try_to_del_timer_sync+0x10/0x10
[ 250.242058] ? __timer_delete_sync+0xc6/0x120
[ 250.242842] ? lock_acquire+0x30/0x80
[ 250.243474] ? __timer_delete_sync+0xc6/0x120
[ 250.244262] __timer_delete_sync+0x98/0x120
[ 250.245015] HFC_cleanup+0x10/0x20 [hfcpci]
[ 250.245704] __do_sys_delete_module+0x348/0x510
[ 250.246461] ? __pfx___do_sys_delete_module+0x10/0x10
[ 250.247338] do_syscall_64+0xc1/0x360
[ 250.247924] entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fix this by initializing hfc_tl timer with DEFINE_TIMER macro.
Also, use mod_timer instead of manual timeout update. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: check S1G action frame size
Before checking the action code, check that it even
exists in the frame. |
| In the Linux kernel, the following vulnerability has been resolved:
driver: soc: xilinx: fix memory leak in xlnx_add_cb_for_notify_event()
The kfree() should be called when memory fails to be allocated for
cb_data in xlnx_add_cb_for_notify_event(), otherwise there will be
a memory leak, so add kfree() to fix it. |
| Discourse is an open source discussion platform. Version before 3.6.2 and 3.6.0.beta2, default Cache-Control response header with value no-store, no-cache was missing from error responses. This may caused unintended caching of those responses by proxies potentially leading to cache poisoning attacks. This vulnerability is fixed in 3.6.2 and 3.6.0.beta2. |
| OrangeHRM is a comprehensive human resource management (HRM) system. From version 5.0 to 5.7, the interview attachment retrieval endpoint in the Recruitment module serves files based solely on an authenticated session and user-supplied identifiers, without verifying whether the requester has permission to access the associated interview record. Because the server does not perform any recruitment-level authorization checks, an ESS-level user with no access to recruitment workflows can directly request interview attachment URLs and receive the corresponding files. This exposes confidential interview documents—including candidate CVs, evaluations, and supporting files—to unauthorized users. The issue arises from relying on predictable object identifiers and session presence rather than validating the user’s association with the relevant recruitment process. This issue has been patched in version 5.8. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid potential memory corruption in __update_iostat_latency()
Add iotype sanity check to avoid potential memory corruption.
This is to fix the compile error below:
fs/f2fs/iostat.c:231 __update_iostat_latency() error: buffer overflow
'io_lat->peak_lat[type]' 3 <= 3
vim +228 fs/f2fs/iostat.c
211 static inline void __update_iostat_latency(struct bio_iostat_ctx
*iostat_ctx,
212 enum iostat_lat_type type)
213 {
214 unsigned long ts_diff;
215 unsigned int page_type = iostat_ctx->type;
216 struct f2fs_sb_info *sbi = iostat_ctx->sbi;
217 struct iostat_lat_info *io_lat = sbi->iostat_io_lat;
218 unsigned long flags;
219
220 if (!sbi->iostat_enable)
221 return;
222
223 ts_diff = jiffies - iostat_ctx->submit_ts;
224 if (page_type >= META_FLUSH)
^^^^^^^^^^
225 page_type = META;
226
227 spin_lock_irqsave(&sbi->iostat_lat_lock, flags);
@228 io_lat->sum_lat[type][page_type] += ts_diff;
^^^^^^^^^
Mixup between META_FLUSH and NR_PAGE_TYPE leads to memory corruption. |
| Improper Input Validation vulnerability in CyberArk CyberArk Secure Web Sessions Extension on Chrome, Edge allows Denial of Service when trying to starting new SWS sessions.This issue affects CyberArk Secure Web Sessions Extension: before 2.2.30305. |
| An OS command injection vulnerability exists due to improper input
validation. The application accepts a parameter directly from user input
without verifying it is a valid IP address or filtering potentially
malicious characters. This could allow an unauthenticated attacker to
inject arbitrary commands. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/fair: Don't balance task to its current running CPU
We've run into the case that the balancer tries to balance a migration
disabled task and trigger the warning in set_task_cpu() like below:
------------[ cut here ]------------
WARNING: CPU: 7 PID: 0 at kernel/sched/core.c:3115 set_task_cpu+0x188/0x240
Modules linked in: hclgevf xt_CHECKSUM ipt_REJECT nf_reject_ipv4 <...snip>
CPU: 7 PID: 0 Comm: swapper/7 Kdump: loaded Tainted: G O 6.1.0-rc4+ #1
Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V5.B221.01 12/09/2021
pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : set_task_cpu+0x188/0x240
lr : load_balance+0x5d0/0xc60
sp : ffff80000803bc70
x29: ffff80000803bc70 x28: ffff004089e190e8 x27: ffff004089e19040
x26: ffff007effcabc38 x25: 0000000000000000 x24: 0000000000000001
x23: ffff80000803be84 x22: 000000000000000c x21: ffffb093e79e2a78
x20: 000000000000000c x19: ffff004089e19040 x18: 0000000000000000
x17: 0000000000001fad x16: 0000000000000030 x15: 0000000000000000
x14: 0000000000000003 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000001 x10: 0000000000000400 x9 : ffffb093e4cee530
x8 : 00000000fffffffe x7 : 0000000000ce168a x6 : 000000000000013e
x5 : 00000000ffffffe1 x4 : 0000000000000001 x3 : 0000000000000b2a
x2 : 0000000000000b2a x1 : ffffb093e6d6c510 x0 : 0000000000000001
Call trace:
set_task_cpu+0x188/0x240
load_balance+0x5d0/0xc60
rebalance_domains+0x26c/0x380
_nohz_idle_balance.isra.0+0x1e0/0x370
run_rebalance_domains+0x6c/0x80
__do_softirq+0x128/0x3d8
____do_softirq+0x18/0x24
call_on_irq_stack+0x2c/0x38
do_softirq_own_stack+0x24/0x3c
__irq_exit_rcu+0xcc/0xf4
irq_exit_rcu+0x18/0x24
el1_interrupt+0x4c/0xe4
el1h_64_irq_handler+0x18/0x2c
el1h_64_irq+0x74/0x78
arch_cpu_idle+0x18/0x4c
default_idle_call+0x58/0x194
do_idle+0x244/0x2b0
cpu_startup_entry+0x30/0x3c
secondary_start_kernel+0x14c/0x190
__secondary_switched+0xb0/0xb4
---[ end trace 0000000000000000 ]---
Further investigation shows that the warning is superfluous, the migration
disabled task is just going to be migrated to its current running CPU.
This is because that on load balance if the dst_cpu is not allowed by the
task, we'll re-select a new_dst_cpu as a candidate. If no task can be
balanced to dst_cpu we'll try to balance the task to the new_dst_cpu
instead. In this case when the migration disabled task is not on CPU it
only allows to run on its current CPU, load balance will select its
current CPU as new_dst_cpu and later triggers the warning above.
The new_dst_cpu is chosen from the env->dst_grpmask. Currently it
contains CPUs in sched_group_span() and if we have overlapped groups it's
possible to run into this case. This patch makes env->dst_grpmask of
group_balance_mask() which exclude any CPUs from the busiest group and
solve the issue. For balancing in a domain with no overlapped groups
the behaviour keeps same as before. |
| A reflected cross-site scripted (XSS) vulnerability in OpenCode Systems USSD Gateway OC Release: 5 allows attackers to execute arbitrary JavaScript in the context of a user's browser via injecting a crafted payload. |
| pwn.college DOJO is an education platform for learning cybersecurity. Prior to commit 467db0b9ea0d9a929dc89b41f6eb59f7cfc68bef, the /workspace endpoint contains an improper authentication vulnerability that allows an attacker to access any active Windows VM without proper authorization. The vulnerability occurs in the view_desktop function where the user is retrieved via a URL parameter without verifying that the requester has administrative privileges. An attacker can supply any user ID and arbitrary password in the request parameters to impersonate another user. When requesting a Windows desktop service, the function does not validate the supplied password before generating access credentials, allowing the attacker to obtain an iframe source URL that grants full access to the target user's Windows VM. This impacts all users with active Windows VMs, as an attacker can access and modify data on the Windows machine and in the home directory of the associated Linux machine via the Z: drive. This issue has been patched in commit 467db0b9ea0d9a929dc89b41f6eb59f7cfc68bef. No known workarounds exist. |
| Insecure permissions in fail2ban-client v0.11.2 allows attackers with limited sudo privileges to perform arbitrary operations as root. NOTE: this is disputed by multiple parties because the action for a triggered rule can legitimately be an arbitrary operation as root. Thus, the software is behaving in accordance with its intended privilege model. |
| MASA CMS is an Enterprise Content Management platform based on open source technology. Versions prior to 7.4.5, 7.3.12, and 7.2.7 contain a SQL injection vulnerability in the `processAsyncObject` method that can result in remote code execution. Versions 7.4.5, 7.3.12, and 7.2.7 contain a fix for the issue. |
| eap.c in pppd in ppp 2.4.2 through 2.4.8 has an rhostname buffer overflow in the eap_request and eap_response functions. |
| xmlStringLenDecodeEntities in parser.c in libxml2 2.9.10 has an infinite loop in a certain end-of-file situation. |
| An issue was discovered in Arm Mbed TLS before 2.23.0. Because of a side channel in modular exponentiation, an RSA private key used in a secure enclave could be disclosed. |
| Mustang before 2.16.3 allows exfiltrating files via XXE attacks. |
| Suricata is a network IDS, IPS and NSM engine developed by the OISF (Open Information Security Foundation) and the Suricata community. Prior to versions 7.0.13 and 8.0.2, working with large buffers in Lua scripts can lead to a stack overflow. Users of Lua rules and output scripts may be affected when working with large buffers. This includes a rule passing a large buffer to a Lua script. This issue has been patched in versions 7.0.13 and 8.0.2. A workaround for this issue involves disabling Lua rules and output scripts, or making sure limits, such as stream.depth.reassembly and HTTP response body limits (response-body-limit), are set to less than half the stack size. |
| Grav is a file-based Web platform. Prior to 1.8.0-beta.27, A Denial of Service (DoS) vulnerability has been identified in Grav related to the handling of scheduled_at parameters. Specifically, the application fails to properly sanitize input for cron expressions. By manipulating the scheduled_at parameter with a malicious input, such as a single quote, the application admin panel becomes non-functional, causing significant disruptions to administrative operations. The only way to recover from this issue is to manually access the host server and modify the backup.yaml file to correct the corrupted cron expression. This vulnerability is fixed in 1.8.0-beta.27. |
| Grav is a file-based Web platform. Prior to 1.8.0-beta.27, A path traversal vulnerability has been identified in Grav CMS, allowing authenticated attackers with administrative privileges to read arbitrary files on the underlying server filesystem. This vulnerability arises due to insufficient input sanitization in the backup tool, where user-supplied paths are not properly restricted, enabling access to files outside the intended webroot directory. The impact of this vulnerability depends on the privileges of the user account running the application. This vulnerability is fixed in 1.8.0-beta.27. |
