| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| FluidSynth is a software synthesizer based on the SoundFont 2 specifications. From 2.5.0 until 2.5.6, the native DLS parser validates ptbl chunks with the unsigned expression cues * 4 + cbsize without checking whether the multiplication and addition fit in 32 bits. A crafted DLS file can supply a large cues value that wraps the expression and passes the chunk-size check, causing poolcues.resize(cues) to request approximately four gigabytes and the parser to read billions of entries beyond the chunk boundary. The excessive allocation and invalid reads can cause denial of service. Builds with enable-native-dls set to OFF are not exposed. This issue is fixed in version 2.5.6. |
| FluidSynth is a software synthesizer based on the SoundFont 2 specifications. From 2.5.0 until 2.5.6, the SF2 parser computes the DMOD modulator count as chunk.size / SF_MOD_SIZE - 1 without rejecting chunks smaller than one record. A crafted SF2 file containing a zero-sized DMOD chunk makes the unsigned subtraction wrap to UINT_MAX, and the parser then attempts billions of SFMod allocations. This exhausts process memory and causes denial of service. No workaround is available. This issue is fixed in version 2.5.6. |
| The Asset CleanUp: Page Speed Booster plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Comment Content in all versions up to, and including, 1.4.0.5 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This is only exploitable on instances where combine_loaded_css has been enabled. |
| The The Forminator Forms – Contact Form, Payment Form & Custom Form Builder plugin for WordPress is vulnerable to arbitrary shortcode execution in all versions up to, and including, 1.57.2. This is due to the software allowing users to execute an action that does not properly validate a value before running do_shortcode. This makes it possible for unauthenticated attackers to execute arbitrary shortcodes. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: serialize resident iomap reads with mrec_lock
ntfs_read_iomap_begin_resident() walks the MFT record through
ntfs_attr_lookup() -> ntfs_attr_find() without taking ni->mrec_lock,
while ntfs_attr_record_resize(), ntfs_make_room_for_attr() and
ntfs_resident_attr_record_add() memmove() the same base_ni->mrec buffer
under that lock. map_mft_record() only takes a reference and does not
serialize, so the reader can observe torn attribute length and offset
fields while a writer is relocating the records.
KCSAN reports the race between the mmap read fault path and both link()
and unlink():
BUG: KCSAN: data-race in ntfs_attr_find / ntfs_attr_record_resize
write to 0xffff888100af1018 of 4 bytes by task 96 on cpu 1:
ntfs_attr_record_resize+0xd2/0x130
ntfs_attr_record_rm+0xad/0x530
ntfs_delete+0x224/0x640
ntfs_unlink+0x14d/0x280
vfs_unlink+0x157/0x520
read to 0xffff888100af1018 of 4 bytes by task 95 on cpu 0:
ntfs_attr_find+0x104/0x5b0
ntfs_attr_lookup+0x39c/0x10c0
ntfs_read_iomap_begin_resident+0xc6/0x230
ntfs_read_iomap_begin+0x5d/0xa0
iomap_iter+0x2e2/0x6e0
iomap_read_folio+0x147/0x2a0
ntfs_read_folio+0x108/0x170
filemap_read_folio+0x35/0x100
filemap_fault+0x993/0x1000
value changed: 0x00000250 -> 0x000001f0
The address is mrec + 0x18, i.e. mft_record.bytes_in_use, and the change
is the 96 bytes of one $FILE_NAME attribute being removed.
Keep base_ni->mrec_lock from the resident read iomap lookup through
iomap_end(). This protects both the attribute walk and the subsequent copy
from iomap->inline_data, which points into the MFT record. The non-resident
path is left alone: ntfs_lookup() already holds the directory inode's
mrec_lock when it reads an index folio through read_mapping_folio(), and
taking the lock in the shared wrapper deadlocks there with recursive locking
on mrec_lock. The comment above the read_mapping_folio() call in
fs/ntfs/dir.c notes the same hazard.
The seek path uses the same lookup helper but does not dereference
iomap->inline_data. Release the lock before returning from that path,
whereas the regular read path records base_ni in iomap->private and releases
the lock from its iomap_end() callback.
Tested with a reproducer that faults in a 16-byte resident file while
another thread runs link()/unlink() on it. Before: 40 KCSAN reports in
about one second. After: no reports in 180 seconds over 206,090 read
iterations and 423,540 link/unlink cycles. A PROVE_LOCKING build shows no
lockdep splat with the same reproducer running for 60 seconds. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: reject unprivileged writes to reserved $LX* xattrs
Reject setxattr of the reserved $LXUID, $LXGID, $LXMOD and $LXDEV names
from userspace unless the caller has CAP_SYS_ADMIN. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: Fix index_root heap OOB write in ntfs_ir_to_ib()
ntfs_ir_to_ib copies all entries from index_root into a freshly allocated
index_block_size-byte buffer without verifying that the entries fit in the
available space. The entries in index_root may be larger than the usable
entry space in the index block.
This can cause OOB writes past the end of the allocation.
The validator ntfs_index_root_inconsistent() checks that entries are
self-consistent within the IR value, but never cross-checks them against
index_block_size. There is no bounds check in ntfs_ir_to_ib() before the
memcpy.
Fixing this at the sink in ntfs_ir_to_ib() since
ntfs_index_root_inconsistent() validates the logical consistency of
index_root as a structure and a root with large entries is a structurally
valid root. The bug is a size conflict of ntfs_ir_to_ib().
Also, the validator is called once per inode load in
ntfs_read_locked_inode() while ntfs_ir_to_ib() is only called during a
reparent, a check there adds no overhead to the common path.
Moreover, even a future call path that bypasses the validator would still
be protected.
With NULL as first parameter of ntfs_error(), the volume error flag is
never set by this call, so the device name will be absent from the error
message. In any case, that the caller, ntfs_ir_reparent(), prints an error
message that includes the device name on NULL returns.
I think this is the best solution available without adding
'struct super_block *sb' as a parameter to ntfs_ir_to_ib().
This heap out-of-bounds write is triggered by a crafted filesystem image,
which is not in the kernel threat model, anyway, fixing memory errors would
be nice to keep things secure. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: fix integer overflow in ftp helper port/address parsing
ip_vs_ftp_get_addrport() accumulates decimal digits into a __u16
(hport) and into unsigned char (p[]) without checking for overflow.
A crafted FTP PASV/EPSV response with an over-long port or address
octet wraps the value, so the helper configures the data connection
with a truncated port/address.
The netfilter conntrack FTP helper had the same defect, fixed in
commit 2b413fc689ba ("netfilter: nf_conntrack_ftp: avoid u16
overflows"). Apply the equivalent fix here: widen the port accumulator
to u32 and reject values above 65535, and reject address octets above
255. |
| In the Linux kernel, the following vulnerability has been resolved:
dpll: fix NULL deref in dpll_device_ops() during teardown race
When the last owner of a dpll device unregisters while a foreign driver
still holds a pin on it via dpll_pin_on_pin_register(), the dpll object
stays alive with an empty registration list. A pin notification queued
before the unregister (e.g. ice reacting to zl3073x_i2c removal) then
walks pin->dpll_refs into dpll_device_ops(), which trips the WARN_ON and
dereferences the missing registration. dpll_lock cannot help because the
notification work was queued before the unregistering driver took the
lock.
Treat the empty registration list as a legitimate transient state. Make
dpll_priv() and dpll_device_ops() return NULL in that case and make
every pin netlink path that resolves a device from a pin skip such
dplls. dpll_cmd_pin_get_one() picks a ref with a live registration and
returns -ENODEV when there is none, the pin dumpit skips such a pin
instead of aborting the dump, dpll_msg_add_pin_dplls() and the
frequency, esync, reference sync and phase adjust set paths skip dead
refs, and dpll_pin_parent_device_set() validates the parent with
dpll_device_get_by_id(). dpll_pin_register() is the last caller that
dereferenced the device ops without a check, so move its frequency
monitor validation under dpll_lock and tolerate a missing registration
there as well.
The empty registration list is equivalent to a cleared DPLL_REGISTERED
mark, both transitions happen under dpll_lock in dpll_device_register()
and dpll_device_unregister(). A pin notification for a pin whose dplls
are all gone is now dropped with -ENODEV instead of crashing, all
callers in the core ignore that return value.
WARNING: drivers/dpll/dpll_core.c:1092 at dpll_device_ops+0x24/0x40,
CPU#83: kworker/u576:3/23471
Modules linked in: ... ice ... zl3073x_i2c(-) ... zl3073x ...
Workqueue: ice_dpll_wq ice_dpll_pin_notify_work [ice]
RIP: 0010:dpll_device_ops+0x24/0x40
Call Trace:
<TASK>
dpll_cmd_pin_get_one+0x336/0x520
dpll_pin_event_send+0x82/0x140
dpll_pin_on_pin_unregister+0xbb/0x160
ice_dpll_pin_notify_work+0x1bc/0x1f0 [ice]
process_one_work+0x19e/0x370
worker_thread+0x1a6/0x310
kthread+0xe4/0x120
ret_from_fork+0x1a1/0x270
ret_from_fork_asm+0x1a/0x30
</TASK>
---[ end trace 0000000000000000 ]---
BUG: kernel NULL pointer dereference, address: 0000000000000010
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, xdp: move offload check into dev_xdp_install()
bpf_xdp_link_update() calls dev_xdp_install() directly and skips
dev_xdp_attach(), so the checks in dev_xdp_attach() do not run. A user can
make an XDP link with a normal program and then swap in an offloaded or
device-bound program with BPF_LINK_UPDATE, which puts it on the software
path.
dev_xdp_install() is the one place all three paths go through:
"ip link set xdp" and BPF_LINK_CREATE reach it via dev_xdp_attach(), and
BPF_LINK_UPDATE calls it directly. So move the program checks (offloaded,
bound to another device, device-bound in generic mode, native vs generic,
DEVMAP and CPUMAP) there, and keep only the netlink-flag check
(XDP_FLAGS_UPDATE_IF_NOEXIST) in dev_xdp_attach(). |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4: Fix incorrect argument passed to nfs4_delete_lease() in nfs4_add_lease()
When nfs4_add_lease() races with a delegation return, it calls
nfs4_delete_lease() to clean up. Previously, it passed priv,
which can legitimately be NULL. Passing a NULL priv eventually
leads to a NULL pointer dereference in generic_setlease(). |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4/flexfiles: fix NULL dereference for NFSv4.0 data servers
flexfiles accepts NFSv4.0 data servers, but two NFSv4 code paths assume
the data server client has a session. Unlike NFSv4.1+, an NFSv4.0 client
has no session (clp->cl_session is NULL; it uses clp->cl_slot_tbl), so
I/O to a v4.0 flexfiles DS oopses:
- nfs4_init_ds_session() dereferences clp->cl_session->session_state
while seeding the DS lease. It also only seeds cl_lease_time when
NFS4_SESSION_INITING is set; without a session that never happens, so
cl_lease_time stays 0 and nfs4_renew_state() busy-loops, requeuing
every 5 seconds. Seed the lease whenever there is no session and
return before touching session state.
- ff_layout_async_handle_error_v4() dereferences
clp->cl_session->fc_slot_table on every DS I/O error. Fall back to the
v4.0 transport slot table (clp->cl_slot_tbl) when there is no session. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4: remove callback IDR entry on client allocation failure
nfs4_alloc_client() allocates an NFSv4.0 callback identifier before it
finishes setting up the client. If any later initialization step fails,
the error path frees the nfs_client directly with nfs_free_client(). That
bypasses nfs_put_client(), which is where the callback IDR entry is
removed during normal teardown.
A failed allocation can therefore leave cb_ident_idr pointing at a freed
nfs_client. A later NFSv4.0 callback lookup by cb_ident would find the
stale pointer and take a reference to it.
Make the callback IDR removal helper callable by the allocation failure
path, and remove the callback identifier before freeing the client.
This was found by a local static-analysis checker for publish-before-free
lifetime bugs and confirmed by manual inspection. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: fix RXDMAD_C buffer recycling race
The RXDMAD_C buffers come from the RRO data queues' page pools, which are
bound to a different NAPI, so the direct page-pool recycle used here could
race the owning NAPI; take the non-direct path as is already done for WED
RX queues. |
| The Tutor LMS – eLearning and online course solution plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 4.0.8. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with subscriber-level access and above, to permanently delete arbitrary WordPress posts — including pages, courses, quizzes, and WooCommerce products — via wp_delete_post( $id, true ). The exploit chain requires the attacker to first trigger the profile-photo upload flow to obtain an authored wp_posts attachment row, then create a Tutor topic reparented to that attachment, before invoking the lesson deletion handler against any target post ID. |
| The Tutor LMS – eLearning and online course solution plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'search' parameter in all versions up to, and including, 4.0.8 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| The UsersWP WordPress plugin before 1.5.10 does not verify that a social login provider has confirmed ownership of an email address before using it to resolve an existing account, allowing unauthenticated attackers to log in as any user, including administrators, whose email address they can assert through a provider account of their own. |
| The Easy Appointments plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 3.12.27 via the handle_customers_ajax. This makes it possible for authenticated attackers, with contributor-level access and above, to extract the full customer dataset from the ea_customers table, including personally identifiable information such as names, email addresses, mobile numbers, dates of birth, and physical addresses. |
| The MC4WP: Mailchimp for WordPress plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via 'data' Dynamic Content Tag in all versions up to, and including, 4.14.0 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| A vulnerability was determined in SourceCodester Online Reviewer Management System 1.0. This issue affects some unknown processing of the file /reviewer_0/admins/assessments/course/btn_functions.php. This manipulation of the argument Course causes sql injection. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized. |
