| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: validate damos_quota_goal->nid for node_mem_{used,free}_bp
Patch series "mm/damon/core: validate damos_quota_goal->nid".
node_mem[cg]_{used,free}_bp DAMOS quota goals receive the node id. The
node id is used for si_meminfo_node() and NODE_DATA() without proper
validation. As a result, privileged users can trigger an out of bounds
memory access using DAMON_SYSFS. Fix the issues.
The issue was originally reported [1] with a fix by another author. The
original author announced [2] that they will stop working including the
fix that was still in the review stage. Hence I'm restarting this.
This patch (of 2):
Users can set damos_quota_goal->nid with arbitrary value for
node_mem_{used,free}_bp. But DAMON core is using those for
si_meminfo_node() without the validation of the value. This can result in
out of bounds memory access. The issue can actually triggered using DAMON
user-space tool (damo), like below.
$ sudo ./damo start --damos_action stat \
--damos_quota_goal node_mem_used_bp 50% -1 \
--damos_quota_interval 1s
$ sudo dmesg
[...]
[ 65.565986] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098
Fix this issue by adding the validation of the given node. If an invalid
node id is given, it returns 0% for used memory ratio, and 100% for free
memory ratio. |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: return error when node already exists in hfs_bnode_create
When hfs_bnode_create() finds that a node is already hashed (which should
not happen in normal operation), it currently returns the existing node
without incrementing its reference count. This causes a reference count
inconsistency that leads to a kernel panic when the node is later freed
in hfs_bnode_put():
kernel BUG at fs/hfsplus/bnode.c:676!
BUG_ON(!atomic_read(&node->refcnt))
This scenario can occur when hfs_bmap_alloc() attempts to allocate a node
that is already in use (e.g., when node 0's bitmap bit is incorrectly
unset), or due to filesystem corruption.
Returning an existing node from a create path is not normal operation.
Fix this by returning ERR_PTR(-EEXIST) instead of the node when it's
already hashed. This properly signals the error condition to callers,
which already check for IS_ERR() return values. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: imx: fix use-after-free on unbind
The SPI subsystem frees the controller and any subsystem allocated
driver data as part of deregistration (unless the allocation is device
managed).
Take another reference before deregistering the controller so that the
driver data is not freed until the driver is done with it. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: sd: fix missing put_disk() when device_add(&disk_dev) fails
If device_add(&sdkp->disk_dev) fails, put_device() runs
scsi_disk_release(), which frees the scsi_disk but leaves the gendisk
referenced. The device_add_disk() error path in sd_probe() calls
put_disk(gd); call put_disk(gd) here to mirror that cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pt5161l) Fix bugs in pt5161l_read_block_data()
Fix two bugs in pt5161l_read_block_data():
1. Buffer overrun: The local buffer rbuf is declared as u8 rbuf[24],
but i2c_smbus_read_block_data() can return up to
I2C_SMBUS_BLOCK_MAX (32) bytes. The i2c-core copies the data into
the caller's buffer before the return value can be checked, so
the post-read length validation does not prevent a stack overrun
if a device returns more than 24 bytes. Resize the buffer to
I2C_SMBUS_BLOCK_MAX.
2. Unexpected positive return on length mismatch: When all three
retries are exhausted because the device returns data with an
unexpected length, i2c_smbus_read_block_data() returns a positive
byte count. The function returns this directly, and callers treat
any non-negative return as success, processing stale or incomplete
buffer contents. Return -EIO when retries are exhausted with a
positive return value, preserving the negative error code on I2C
failure. |
| In the Linux kernel, the following vulnerability has been resolved:
zram: do not forget to endio for partial discard requests
As reported by Qu Wenruo and Avinesh Kumar, the following
getconf PAGESIZE
65536
blkdiscard -p 4k /dev/zram0
takes literally forever to complete. zram doesn't support partial
discards and just returns immediately w/o doing any discard work in such
cases. The problem is that we forget to endio on our way out, so
blkdiscard sleeps forever in submit_bio_wait(). Fix this by jumping to
end_bio label, which does bio_endio(). |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix bounds check in check_xattrs() to prevent out-of-bounds access
The bounds check for the next xattr entry in check_xattrs() uses
(void *)next >= end, which allows next to point within sizeof(u32)
bytes of end. On the next loop iteration, IS_LAST_ENTRY() reads 4
bytes via *(__u32 *)(entry), which can overrun the valid xattr region.
For example, if next lands at end - 1, the check passes since
next < end, but IS_LAST_ENTRY() reads 4 bytes starting at end - 1,
accessing 3 bytes beyond the valid region.
Fix this by changing the check to (void *)next + sizeof(u32) > end,
ensuring there is always enough space for the IS_LAST_ENTRY() read
on the subsequent iteration. |
| Jenkins LDAP Plugin 807.v7d7de30930cf and earlier deserializes data from LDAP referrals without validation. |
| Jenkins Job Import Plugin 143.v044a_2e819b_27 and earlier does not perform a permission check in an HTTP endpoint, allowing attackers with Overall/Read permission to enumerate credentials IDs of credentials stored in Jenkins. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: auth_gss: fix memory leaks in XDR decoding error paths
The gssx_dec_ctx(), gssx_dec_status(), and gssx_dec_name()
functions allocate memory via gssx_dec_buffer(), which calls
kmemdup(). When a subsequent decode operation fails, these
functions return immediately without freeing previously
allocated buffers, causing memory leaks.
The leak in gssx_dec_ctx() is particularly relevant because
the caller (gssp_accept_sec_context_upcall) initializes several
buffer length fields to non-zero values, resulting in memory
allocation:
struct gssx_ctx rctxh = {
.exported_context_token.len = GSSX_max_output_handle_sz,
.mech.len = GSS_OID_MAX_LEN,
.src_name.display_name.len = GSSX_max_princ_sz,
.targ_name.display_name.len = GSSX_max_princ_sz
};
If, for example, gssx_dec_name() succeeds for src_name but
fails for targ_name, the memory allocated for
exported_context_token, mech, and src_name.display_name
remains unreferenced and cannot be reclaimed.
Add error handling with goto-based cleanup to free any
previously allocated buffers before returning an error. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccree - fix a memory leak in cc_mac_digest()
Add cc_unmap_result() if cc_map_hash_request_final()
fails to prevent potential memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Add spectre boundry for syscall dispatch table
The LoongArch syscall number is directly controlled by userspace, but
does not have a array_index_nospec() boundry to prevent access past the
syscall function pointer tables. |
| Webmin before 2.640 does not safely construct a filename for saving of an attachment within the mailboxes component. This occurs in mailboxes/detachall.cgi. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix race condition in QP timer handlers
I encontered the following warning:
WARNING: drivers/infiniband/sw/rxe/rxe_task.c:249 at rxe_sched_task+0x1c8/0x238 [rdma_rxe], CPU#0: swapper/0/0
...
libsha1 [last unloaded: ip6_udp_tunnel]
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G C 6.19.0-rc5-64k-v8+ #37 PREEMPT
Tainted: [C]=CRAP
Hardware name: Raspberry Pi 4 Model B Rev 1.2
Call trace:
rxe_sched_task+0x1c8/0x238 [rdma_rxe] (P)
retransmit_timer+0x130/0x188 [rdma_rxe]
call_timer_fn+0x68/0x4d0
__run_timers+0x630/0x888
...
WARNING: drivers/infiniband/sw/rxe/rxe_task.c:38 at rxe_sched_task+0x1c0/0x238 [rdma_rxe], CPU#0: swapper/0/0
...
WARNING: drivers/infiniband/sw/rxe/rxe_task.c:111 at do_work+0x488/0x5c8 [rdma_rxe], CPU#3: kworker/u17:4/93400
...
refcount_t: underflow; use-after-free.
WARNING: lib/refcount.c:28 at refcount_warn_saturate+0x138/0x1a0, CPU#3: kworker/u17:4/93400
The issue is caused by a race condition between retransmit_timer() and
rxe_destroy_qp, leading to the Queue Pair's (QP) reference count dropping
to zero during timer handler execution.
It seems this warning is harmless because rxe_qp_do_cleanup() will flush
all pending timers and requests.
Example of flow causing the issue:
CPU0 CPU1
retransmit_timer() {
spin_lock_irqsave
rxe_destroy_qp()
__rxe_cleanup()
__rxe_put() // qp->ref_count decrease to 0
rxe_qp_do_cleanup() {
if (qp->valid) {
rxe_sched_task() {
WARN_ON(rxe_read(task->qp) <= 0);
}
}
spin_unlock_irqrestore
}
spin_lock_irqsave
qp->valid = 0
spin_unlock_irqrestore
}
Ensure the QP's reference count is maintained and its validity is checked
within the timer callbacks by adding calls to rxe_get(qp) and corresponding
rxe_put(qp) after use. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: don't cache extent during splitting extent
Caching extents during the splitting process is risky, as it may result
in stale extents remaining in the status tree. Moreover, in most cases,
the corresponding extent block entries are likely already cached before
the split happens, making caching here not particularly useful.
Assume we have an unwritten extent, and then DIO writes the first half.
[UUUUUUUUUUUUUUUU] on-disk extent U: unwritten extent
[UUUUUUUUUUUUUUUU] extent status tree
|<- ->| ----> dio write this range
First, when ext4_split_extent_at() splits this extent, it truncates the
existing extent and then inserts a new one. During this process, this
extent status entry may be shrunk, and calls to ext4_find_extent() and
ext4_cache_extents() may occur, which could potentially insert the
truncated range as a hole into the extent status tree. After the split
is completed, this hole is not replaced with the correct status.
[UUUUUUU|UUUUUUUU] on-disk extent U: unwritten extent
[UUUUUUU|HHHHHHHH] extent status tree H: hole
Then, the outer calling functions will not correct this remaining hole
extent either. Finally, if we perform a delayed buffer write on this
latter part, it will re-insert the delayed extent and cause an error in
space accounting.
In adition, if the unwritten extent cache is not shrunk during the
splitting, ext4_cache_extents() also conflicts with existing extents
when caching extents. In the future, we will add checks when caching
extents, which will trigger a warning. Therefore, Do not cache extents
that are being split. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: catc: enable basic endpoint checking
catc_probe() fills three URBs with hardcoded endpoint pipes without
verifying the endpoint descriptors:
- usb_sndbulkpipe(usbdev, 1) and usb_rcvbulkpipe(usbdev, 1) for TX/RX
- usb_rcvintpipe(usbdev, 2) for interrupt status
A malformed USB device can present these endpoints with transfer types
that differ from what the driver assumes.
Add a catc_usb_ep enum for endpoint numbers, replacing magic constants
throughout. Add usb_check_bulk_endpoints() and usb_check_int_endpoints()
calls after usb_set_interface() to verify endpoint types before use,
rejecting devices with mismatched descriptors at probe time.
Similar to
- commit 90b7f2961798 ("net: usb: rtl8150: enable basic endpoint checking")
which fixed the issue in rtl8150. |
| FastNetMon Community Edition through 1.2.9 contains a configuration injection vulnerability in the Juniper router integration plugin. In src/juniper_plugin/fastnetmon_juniper.php, the $IP_ATTACK variable (received from argv[1]) is directly interpolated into Juniper NETCONF set-configuration commands at lines 69 and 90 without any validation or sanitization. Line 69: $conn->load_set_configuration("set routing-options static route {$IP_ATTACK} community 65535:666 discard"). Line 90: $conn->load_set_configuration("delete routing-options static route {$IP_ATTACK}/32"). An attacker who can control the IP address string can inject additional Juniper CLI configuration commands by embedding newline characters followed by arbitrary set/delete commands. This could modify the router's routing table, firewall filters, user accounts, or any other configuration element accessible via NETCONF. The impact is full router compromise. |
| Northern.tech Mender Client 5 before 5.0.4 allows a Cryptographic signature verification bypass. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: starfive - Fix memory leak in starfive_aes_aead_do_one_req()
The starfive_aes_aead_do_one_req() function allocates rctx->adata with
kzalloc() but fails to free it if sg_copy_to_buffer() or
starfive_aes_hw_init() fails, which lead to memory leaks.
Since rctx->adata is unconditionally freed after the write_adata
operations, ensure consistent cleanup by freeing the allocation in these
earlier error paths as well.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
md/md-llbitmap: fix percpu_ref not resurrected on suspend timeout
When llbitmap_suspend_timeout() times out waiting for percpu_ref to
become zero, it returns -ETIMEDOUT without resurrecting the percpu_ref.
The caller (md_llbitmap_daemon_fn) then continues to the next page
without calling llbitmap_resume(), leaving the percpu_ref in a killed
state permanently.
Fix this by resurrecting the percpu_ref before returning the error,
ensuring the page control structure remains usable for subsequent
operations. |
