| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: remove WARN_ON_ONCE when accessing forward path array
Although unlikely, recent support for IPIP tunnels increases chances of
reaching this WARN_ON_ONCE if userspace manages to build a sufficiently
long forward path.
Remove it. |
| In the Linux kernel, the following vulnerability has been resolved:
slip: reject VJ receive packets on instances with no rstate array
slhc_init() accepts rslots == 0 as a valid configuration, with the
documented meaning of 'no receive compression'. In that case the
allocation loop in slhc_init() is skipped, so comp->rstate stays
NULL and comp->rslot_limit stays 0 (from the kzalloc of struct
slcompress).
The receive helpers do not defend against that configuration.
slhc_uncompress() dereferences comp->rstate[x] when the VJ header
carries an explicit connection ID, and slhc_remember() later assigns
cs = &comp->rstate[...] after only comparing the packet's slot number
to comp->rslot_limit. Because rslot_limit is 0, slot 0 passes the
range check, and the code dereferences a NULL rstate.
The configuration is reachable in-tree through PPP. PPPIOCSMAXCID
stores its argument in a signed int, and (val >> 16) uses arithmetic
shift. Passing 0xffff0000 therefore sign-extends to -1, so val2 + 1
is 0 and ppp_generic.c ends up calling slhc_init(0, 1). Because
/dev/ppp open is gated by ns_capable(CAP_NET_ADMIN), the whole path
is reachable from an unprivileged user namespace. Once the malformed
VJ state is installed, any inbound VJ-compressed or VJ-uncompressed
frame that selects slot 0 crashes the kernel in softirq context:
Oops: general protection fault, probably for non-canonical
address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:slhc_uncompress (drivers/net/slip/slhc.c:519)
Call Trace:
<TASK>
ppp_receive_nonmp_frame (drivers/net/ppp/ppp_generic.c:2466)
ppp_input (drivers/net/ppp/ppp_generic.c:2359)
ppp_async_process (drivers/net/ppp/ppp_async.c:492)
tasklet_action_common (kernel/softirq.c:926)
handle_softirqs (kernel/softirq.c:623)
run_ksoftirqd (kernel/softirq.c:1055)
smpboot_thread_fn (kernel/smpboot.c:160)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:164)
</TASK>
Reject the receive side on such instances instead of touching rstate.
slhc_uncompress() falls through to its existing 'bad' label, which
bumps sls_i_error and enters the toss state. slhc_remember() mirrors
that with an explicit sls_i_error increment followed by slhc_toss();
the sls_i_runt counter is not used here because a missing rstate is
an internal configuration state, not a runt packet.
The transmit path is unaffected: the only in-tree caller that picks
rslots from userspace (ppp_generic.c) still supplies tslots >= 1, and
slip.c always calls slhc_init(16, 16), so comp->tstate remains valid
and slhc_compress() continues to work. |
| In the Linux kernel, the following vulnerability has been resolved:
bareudp: fix NULL pointer dereference in bareudp_fill_metadata_dst()
bareudp_fill_metadata_dst() passes bareudp->sock to
udp_tunnel6_dst_lookup() in the IPv6 path without a NULL check.
The socket is only created in bareudp_open() and NULLed in
bareudp_stop(), so calling this function while the device is down
triggers a NULL dereference via sock->sk.
BUG: kernel NULL pointer dereference, address: 0000000000000018
RIP: 0010:udp_tunnel6_dst_lookup (net/ipv6/ip6_udp_tunnel.c:160)
Call Trace:
<TASK>
bareudp_fill_metadata_dst (drivers/net/bareudp.c:532)
do_execute_actions (net/openvswitch/actions.c:901)
ovs_execute_actions (net/openvswitch/actions.c:1589)
ovs_packet_cmd_execute (net/openvswitch/datapath.c:700)
genl_family_rcv_msg_doit (net/netlink/genetlink.c:1114)
genl_rcv_msg (net/netlink/genetlink.c:1209)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
</TASK>
Add a NULL check returning -ESHUTDOWN, consistent with the xmit paths
in the same driver. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Ludwig You QuickWebP – Compress / Optimize Images & Convert WebP | SEO Friendly quickwebp allows Path Traversal.This issue affects QuickWebP – Compress / Optimize Images & Convert WebP | SEO Friendly: from n/a through <= 3.2.7. |
| A local user with low privileges may be able to influence the behavior of a privileged system service by manipulating configuration or application-related files located in user-writable areas of the filesystem. The affected service processes data from locations that are not sufficiently protected against modification by low-privileged users. As the service runs with elevated privileges, successful exploitation may result in a local privilege escalation. |
| A high privileged remote attacker can exploit an unauthenticated SQL Injection vulnerability in the DevSerialReset function due to improper neutralization of special elements in a SQL SELECT command. This can result in a total loss of confidentiality. |
| A high privileged remote attacker can exploit an unauthenticated SQL Injection vulnerability in the _RemoveRequest function due to improper neutralization of special elements in a SQL DELETE command allowing for reading the whole database and deleting entries in a non critical table. This can result in a total loss of confidentiality and some loss of integrity. |
| An low privileged remote attacker can exploit an unauthenticated SQL Injection vulnerability in the dashboard view due to improper neutralization of special elements in a SQL SELECT command. This can result in a total loss of confidentiality. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in tainacan Tainacan tainacan allows Blind SQL Injection.This issue affects Tainacan: from n/a through <= 1.0.3. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: fix deadlock in ni_read_folio_cmpr
Syzbot reported a task hung in ni_readpage_cmpr (now ni_read_folio_cmpr).
This is caused by a lock inversion deadlock involving the inode mutex
(ni_lock) and page locks.
Scenario:
1. Task A enters ntfs_read_folio() for page X. It acquires ni_lock.
2. Task A calls ni_read_folio_cmpr(), which attempts to lock all pages in
the compressed frame (including page Y).
3. Concurrently, Task B (e.g., via readahead) has locked page Y and
calls ntfs_read_folio().
4. Task B waits for ni_lock (held by A).
5. Task A waits for page Y lock (held by B).
-> DEADLOCK.
The fix is to restructure locking: do not take ni_lock in ntfs_read_folio().
Instead, acquire ni_lock inside ni_read_folio_cmpr() ONLY AFTER all required
page locks for the frame have been successfully acquired. This restores the
correct lock ordering (Page Lock -> ni_lock) consistent with VFS.
[almaz.alexandrovich@paragon-software.com: ni_readpage_cmpr was renamed to ni_read_folio_cmpr] |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix potential NULL pointer dereference in context cleanup
aie_destroy_context() is invoked during error handling in
aie2_create_context(). However, aie_destroy_context() assumes that the
context's mailbox channel pointer is non-NULL. If mailbox channel
creation fails, the pointer remains NULL and calling aie_destroy_context()
can lead to a NULL pointer dereference.
In aie2_create_context(), replace aie_destroy_context() with a function
which request firmware to remove the context created previously. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix race condition when checking rpm_on
When autosuspend is triggered, driver rpm_on flag is set to indicate that
a suspend/resume is already in progress. However, when a userspace
application submits a command during this narrow window,
amdxdna_pm_resume_get() may incorrectly skip the resume operation because
the rpm_on flag is still set. This results in commands being submitted
while the device has not actually resumed, causing unexpected behavior.
The set_dpm() is called by suspend/resume, it relied on rpm_on flag to
avoid calling into rpm suspend/resume recursivly. So to fix this, remove
the use of the rpm_on flag entirely. Instead, introduce aie2_pm_set_dpm()
which explicitly resumes the device before invoking set_dpm(). With this
change, set_dpm() is called directly inside the suspend or resume execution
path. Otherwise, aie2_pm_set_dpm() is called. |
| An origin validation error vulnerability in Synology Assistant before 7.0.6-50085 allows local users to write arbitrary files with restricted content during installation. |
| Origin validation error in Microsoft Entra ID allows an unauthorized attacker to elevate privileges over a network. |
| A use of get request method with sensitive query strings vulnerability in volume encryption of Synology Storage Manager package before 1.0.1-1100 allows local attackers to obtain sensitive information. |
| The vulnerability in the Tassos Framework Plugin allows users to delete arbitrary files on the affected sites. |
| The Web-based Management allows a remote low privileged Engineer user to install additional APPs on the device downloaded from the PLCnext Store without implementing any data verification mechanism, leading to the capability for an Engineer user to reach arbitrary code execution with root privileges on the PLC device. A successful exploitation may allow to install a manipulated APP package, potentially impacting integrity and availability of the PLCnext Control. |
| An unauthenticated remote attacker can exploit an unauthenticated SQL Injection vulnerability in the userinfo endpoint due to improper neutralization of special elements in a SQL SELECT command. This can result in a total loss of confidentiality. |
| An unauthenticated remote attacker can exploit an unauthenticated SQL Injection vulnerability in the ssoabstractservice due to improper neutralization of special elements in a SQL SELECT command. This can result in a total loss of confidentiality. |
| An unauthenticated remote attacker can exploit an unauthenticated SQL Injection vulnerability in the getLiveValues functions sn parameter due to improper neutralization of special elements in a SQL SELECT command. This can result in a total loss of confidentiality. |
