| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/pm: Fix the null pointer dereference in apply_state_adjust_rules
Check the pointer value to fix potential null pointer
dereference |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Fix the null pointer dereference for vega10_hwmgr
Check return value and conduct null pointer handling to avoid null pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
media: xc2028: avoid use-after-free in load_firmware_cb()
syzkaller reported use-after-free in load_firmware_cb() [1].
The reason is because the module allocated a struct tuner in tuner_probe(),
and then the module initialization failed, the struct tuner was released.
A worker which created during module initialization accesses this struct
tuner later, it caused use-after-free.
The process is as follows:
task-6504 worker_thread
tuner_probe <= alloc dvb_frontend [2]
...
request_firmware_nowait <= create a worker
...
tuner_remove <= free dvb_frontend
...
request_firmware_work_func <= the firmware is ready
load_firmware_cb <= but now the dvb_frontend has been freed
To fix the issue, check the dvd_frontend in load_firmware_cb(), if it is
null, report a warning and just return.
[1]:
==================================================================
BUG: KASAN: use-after-free in load_firmware_cb+0x1310/0x17a0
Read of size 8 at addr ffff8000d7ca2308 by task kworker/2:3/6504
Call trace:
load_firmware_cb+0x1310/0x17a0
request_firmware_work_func+0x128/0x220
process_one_work+0x770/0x1824
worker_thread+0x488/0xea0
kthread+0x300/0x430
ret_from_fork+0x10/0x20
Allocated by task 6504:
kzalloc
tuner_probe+0xb0/0x1430
i2c_device_probe+0x92c/0xaf0
really_probe+0x678/0xcd0
driver_probe_device+0x280/0x370
__device_attach_driver+0x220/0x330
bus_for_each_drv+0x134/0x1c0
__device_attach+0x1f4/0x410
device_initial_probe+0x20/0x30
bus_probe_device+0x184/0x200
device_add+0x924/0x12c0
device_register+0x24/0x30
i2c_new_device+0x4e0/0xc44
v4l2_i2c_new_subdev_board+0xbc/0x290
v4l2_i2c_new_subdev+0xc8/0x104
em28xx_v4l2_init+0x1dd0/0x3770
Freed by task 6504:
kfree+0x238/0x4e4
tuner_remove+0x144/0x1c0
i2c_device_remove+0xc8/0x290
__device_release_driver+0x314/0x5fc
device_release_driver+0x30/0x44
bus_remove_device+0x244/0x490
device_del+0x350/0x900
device_unregister+0x28/0xd0
i2c_unregister_device+0x174/0x1d0
v4l2_device_unregister+0x224/0x380
em28xx_v4l2_init+0x1d90/0x3770
The buggy address belongs to the object at ffff8000d7ca2000
which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 776 bytes inside of
2048-byte region [ffff8000d7ca2000, ffff8000d7ca2800)
The buggy address belongs to the page:
page:ffff7fe00035f280 count:1 mapcount:0 mapping:ffff8000c001f000 index:0x0
flags: 0x7ff800000000100(slab)
raw: 07ff800000000100 ffff7fe00049d880 0000000300000003 ffff8000c001f000
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8000d7ca2200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8000d7ca2280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8000d7ca2300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8000d7ca2380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8000d7ca2400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
[2]
Actually, it is allocated for struct tuner, and dvb_frontend is inside. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: core: check uartclk for zero to avoid divide by zero
Calling ioctl TIOCSSERIAL with an invalid baud_base can
result in uartclk being zero, which will result in a
divide by zero error in uart_get_divisor(). The check for
uartclk being zero in uart_set_info() needs to be done
before other settings are made as subsequent calls to
ioctl TIOCSSERIAL for the same port would be impacted if
the uartclk check was done where uartclk gets set.
Oops: divide error: 0000 PREEMPT SMP KASAN PTI
RIP: 0010:uart_get_divisor (drivers/tty/serial/serial_core.c:580)
Call Trace:
<TASK>
serial8250_get_divisor (drivers/tty/serial/8250/8250_port.c:2576
drivers/tty/serial/8250/8250_port.c:2589)
serial8250_do_set_termios (drivers/tty/serial/8250/8250_port.c:502
drivers/tty/serial/8250/8250_port.c:2741)
serial8250_set_termios (drivers/tty/serial/8250/8250_port.c:2862)
uart_change_line_settings (./include/linux/spinlock.h:376
./include/linux/serial_core.h:608 drivers/tty/serial/serial_core.c:222)
uart_port_startup (drivers/tty/serial/serial_core.c:342)
uart_startup (drivers/tty/serial/serial_core.c:368)
uart_set_info (drivers/tty/serial/serial_core.c:1034)
uart_set_info_user (drivers/tty/serial/serial_core.c:1059)
tty_set_serial (drivers/tty/tty_io.c:2637)
tty_ioctl (drivers/tty/tty_io.c:2647 drivers/tty/tty_io.c:2791)
__x64_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:907
fs/ioctl.c:893 fs/ioctl.c:893)
do_syscall_64 (arch/x86/entry/common.c:52
(discriminator 1) arch/x86/entry/common.c:83 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Rule: add |
| In the Linux kernel, the following vulnerability has been resolved:
usb: vhci-hcd: Do not drop references before new references are gained
At a few places the driver carries stale pointers
to references that can still be used. Make sure that does not happen.
This strictly speaking closes ZDI-CAN-22273, though there may be
similar races in the driver. |
| In the Linux kernel, the following vulnerability has been resolved:
exec: Fix ToCToU between perm check and set-uid/gid usage
When opening a file for exec via do_filp_open(), permission checking is
done against the file's metadata at that moment, and on success, a file
pointer is passed back. Much later in the execve() code path, the file
metadata (specifically mode, uid, and gid) is used to determine if/how
to set the uid and gid. However, those values may have changed since the
permissions check, meaning the execution may gain unintended privileges.
For example, if a file could change permissions from executable and not
set-id:
---------x 1 root root 16048 Aug 7 13:16 target
to set-id and non-executable:
---S------ 1 root root 16048 Aug 7 13:16 target
it is possible to gain root privileges when execution should have been
disallowed.
While this race condition is rare in real-world scenarios, it has been
observed (and proven exploitable) when package managers are updating
the setuid bits of installed programs. Such files start with being
world-executable but then are adjusted to be group-exec with a set-uid
bit. For example, "chmod o-x,u+s target" makes "target" executable only
by uid "root" and gid "cdrom", while also becoming setuid-root:
-rwxr-xr-x 1 root cdrom 16048 Aug 7 13:16 target
becomes:
-rwsr-xr-- 1 root cdrom 16048 Aug 7 13:16 target
But racing the chmod means users without group "cdrom" membership can
get the permission to execute "target" just before the chmod, and when
the chmod finishes, the exec reaches brpm_fill_uid(), and performs the
setuid to root, violating the expressed authorization of "only cdrom
group members can setuid to root".
Re-check that we still have execute permissions in case the metadata
has changed. It would be better to keep a copy from the perm-check time,
but until we can do that refactoring, the least-bad option is to do a
full inode_permission() call (under inode lock). It is understood that
this is safe against dead-locks, but hardly optimal. |
| In the Linux kernel, the following vulnerability has been resolved:
dev/parport: fix the array out-of-bounds risk
Fixed array out-of-bounds issues caused by sprintf
by replacing it with snprintf for safer data copying,
ensuring the destination buffer is not overflowed.
Below is the stack trace I encountered during the actual issue:
[ 66.575408s] [pid:5118,cpu4,QThread,4]Kernel panic - not syncing: stack-protector:
Kernel stack is corrupted in: do_hardware_base_addr+0xcc/0xd0 [parport]
[ 66.575408s] [pid:5118,cpu4,QThread,5]CPU: 4 PID: 5118 Comm:
QThread Tainted: G S W O 5.10.97-arm64-desktop #7100.57021.2
[ 66.575439s] [pid:5118,cpu4,QThread,6]TGID: 5087 Comm: EFileApp
[ 66.575439s] [pid:5118,cpu4,QThread,7]Hardware name: HUAWEI HUAWEI QingYun
PGUX-W515x-B081/SP1PANGUXM, BIOS 1.00.07 04/29/2024
[ 66.575439s] [pid:5118,cpu4,QThread,8]Call trace:
[ 66.575469s] [pid:5118,cpu4,QThread,9] dump_backtrace+0x0/0x1c0
[ 66.575469s] [pid:5118,cpu4,QThread,0] show_stack+0x14/0x20
[ 66.575469s] [pid:5118,cpu4,QThread,1] dump_stack+0xd4/0x10c
[ 66.575500s] [pid:5118,cpu4,QThread,2] panic+0x1d8/0x3bc
[ 66.575500s] [pid:5118,cpu4,QThread,3] __stack_chk_fail+0x2c/0x38
[ 66.575500s] [pid:5118,cpu4,QThread,4] do_hardware_base_addr+0xcc/0xd0 [parport] |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: During vport delete send async logout explicitly
During vport delete, it is observed that during unload we hit a crash
because of stale entries in outstanding command array. For all these stale
I/O entries, eh_abort was issued and aborted (fast_fail_io = 2009h) but
I/Os could not complete while vport delete is in process of deleting.
BUG: kernel NULL pointer dereference, address: 000000000000001c
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
Workqueue: qla2xxx_wq qla_do_work [qla2xxx]
RIP: 0010:dma_direct_unmap_sg+0x51/0x1e0
RSP: 0018:ffffa1e1e150fc68 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 0000000000000021 RCX: 0000000000000001
RDX: 0000000000000021 RSI: 0000000000000000 RDI: ffff8ce208a7a0d0
RBP: ffff8ce208a7a0d0 R08: 0000000000000000 R09: ffff8ce378aac9c8
R10: ffff8ce378aac8a0 R11: ffffa1e1e150f9d8 R12: 0000000000000000
R13: 0000000000000000 R14: ffff8ce378aac9c8 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff8d217f000000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000001c CR3: 0000002089acc000 CR4: 0000000000350ee0
Call Trace:
<TASK>
qla2xxx_qpair_sp_free_dma+0x417/0x4e0
? qla2xxx_qpair_sp_compl+0x10d/0x1a0
? qla2x00_status_entry+0x768/0x2830
? newidle_balance+0x2f0/0x430
? dequeue_entity+0x100/0x3c0
? qla24xx_process_response_queue+0x6a1/0x19e0
? __schedule+0x2d5/0x1140
? qla_do_work+0x47/0x60
? process_one_work+0x267/0x440
? process_one_work+0x440/0x440
? worker_thread+0x2d/0x3d0
? process_one_work+0x440/0x440
? kthread+0x156/0x180
? set_kthread_struct+0x50/0x50
? ret_from_fork+0x22/0x30
</TASK>
Send out async logout explicitly for all the ports during vport delete. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix for possible memory corruption
Init Control Block is dereferenced incorrectly. Correctly dereference ICB |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: validate nvme_local_port correctly
The driver load failed with error message,
qla2xxx [0000:04:00.0]-ffff:0: register_localport failed: ret=ffffffef
and with a kernel crash,
BUG: unable to handle kernel NULL pointer dereference at 0000000000000070
Workqueue: events_unbound qla_register_fcport_fn [qla2xxx]
RIP: 0010:nvme_fc_register_remoteport+0x16/0x430 [nvme_fc]
RSP: 0018:ffffaaa040eb3d98 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff9dfb46b78c00 RCX: 0000000000000000
RDX: ffff9dfb46b78da8 RSI: ffffaaa040eb3e08 RDI: 0000000000000000
RBP: ffff9dfb612a0a58 R08: ffffffffaf1d6270 R09: 3a34303a30303030
R10: 34303a303030305b R11: 2078787832616c71 R12: ffff9dfb46b78dd4
R13: ffff9dfb46b78c24 R14: ffff9dfb41525300 R15: ffff9dfb46b78da8
FS: 0000000000000000(0000) GS:ffff9dfc67c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000070 CR3: 000000018da10004 CR4: 00000000000206f0
Call Trace:
qla_nvme_register_remote+0xeb/0x1f0 [qla2xxx]
? qla2x00_dfs_create_rport+0x231/0x270 [qla2xxx]
qla2x00_update_fcport+0x2a1/0x3c0 [qla2xxx]
qla_register_fcport_fn+0x54/0xc0 [qla2xxx]
Exit the qla_nvme_register_remote() function when qla_nvme_register_hba()
fails and correctly validate nvme_local_port. |
| In the Linux kernel, the following vulnerability has been resolved:
protect the fetch of ->fd[fd] in do_dup2() from mispredictions
both callers have verified that fd is not greater than ->max_fds;
however, misprediction might end up with
tofree = fdt->fd[fd];
being speculatively executed. That's wrong for the same reasons
why it's wrong in close_fd()/file_close_fd_locked(); the same
solution applies - array_index_nospec(fd, fdt->max_fds) could differ
from fd only in case of speculative execution on mispredicted path. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: pca953x: fix pca953x_irq_bus_sync_unlock race
Ensure that `i2c_lock' is held when setting interrupt latch and mask in
pca953x_irq_bus_sync_unlock() in order to avoid races.
The other (non-probe) call site pca953x_gpio_set_multiple() ensures the
lock is held before calling pca953x_write_regs().
The problem occurred when a request raced against irq_bus_sync_unlock()
approximately once per thousand reboots on an i.MX8MP based system.
* Normal case
0-0022: write register AI|3a {03,02,00,00,01} Input latch P0
0-0022: write register AI|49 {fc,fd,ff,ff,fe} Interrupt mask P0
0-0022: write register AI|08 {ff,00,00,00,00} Output P3
0-0022: write register AI|12 {fc,00,00,00,00} Config P3
* Race case
0-0022: write register AI|08 {ff,00,00,00,00} Output P3
0-0022: write register AI|08 {03,02,00,00,01} *** Wrong register ***
0-0022: write register AI|12 {fc,00,00,00,00} Config P3
0-0022: write register AI|49 {fc,fd,ff,ff,fe} Interrupt mask P0 |
| In the Linux kernel, the following vulnerability has been resolved:
closures: Change BUG_ON() to WARN_ON()
If a BUG_ON() can be hit in the wild, it shouldn't be a BUG_ON()
For reference, this has popped up once in the CI, and we'll need more
info to debug it:
03240 ------------[ cut here ]------------
03240 kernel BUG at lib/closure.c:21!
03240 kernel BUG at lib/closure.c:21!
03240 Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
03240 Modules linked in:
03240 CPU: 15 PID: 40534 Comm: kworker/u80:1 Not tainted 6.10.0-rc4-ktest-ga56da69799bd #25570
03240 Hardware name: linux,dummy-virt (DT)
03240 Workqueue: btree_update btree_interior_update_work
03240 pstate: 00001005 (nzcv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--)
03240 pc : closure_put+0x224/0x2a0
03240 lr : closure_put+0x24/0x2a0
03240 sp : ffff0000d12071c0
03240 x29: ffff0000d12071c0 x28: dfff800000000000 x27: ffff0000d1207360
03240 x26: 0000000000000040 x25: 0000000000000040 x24: 0000000000000040
03240 x23: ffff0000c1f20180 x22: 0000000000000000 x21: ffff0000c1f20168
03240 x20: 0000000040000000 x19: ffff0000c1f20140 x18: 0000000000000001
03240 x17: 0000000000003aa0 x16: 0000000000003ad0 x15: 1fffe0001c326974
03240 x14: 0000000000000a1e x13: 0000000000000000 x12: 1fffe000183e402d
03240 x11: ffff6000183e402d x10: dfff800000000000 x9 : ffff6000183e402e
03240 x8 : 0000000000000001 x7 : 00009fffe7c1bfd3 x6 : ffff0000c1f2016b
03240 x5 : ffff0000c1f20168 x4 : ffff6000183e402e x3 : ffff800081391954
03240 x2 : 0000000000000001 x1 : 0000000000000000 x0 : 00000000a8000000
03240 Call trace:
03240 closure_put+0x224/0x2a0
03240 bch2_check_for_deadlock+0x910/0x1028
03240 bch2_six_check_for_deadlock+0x1c/0x30
03240 six_lock_slowpath.isra.0+0x29c/0xed0
03240 six_lock_ip_waiter+0xa8/0xf8
03240 __bch2_btree_node_lock_write+0x14c/0x298
03240 bch2_trans_lock_write+0x6d4/0xb10
03240 __bch2_trans_commit+0x135c/0x5520
03240 btree_interior_update_work+0x1248/0x1c10
03240 process_scheduled_works+0x53c/0xd90
03240 worker_thread+0x370/0x8c8
03240 kthread+0x258/0x2e8
03240 ret_from_fork+0x10/0x20
03240 Code: aa1303e0 d63f0020 a94363f7 17ffff8c (d4210000)
03240 ---[ end trace 0000000000000000 ]---
03240 Kernel panic - not syncing: Oops - BUG: Fatal exception
03240 SMP: stopping secondary CPUs
03241 SMP: failed to stop secondary CPUs 13,15
03241 Kernel Offset: disabled
03241 CPU features: 0x00,00000003,80000008,4240500b
03241 Memory Limit: none
03241 ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception ]---
03246 ========= FAILED TIMEOUT copygc_torture_no_checksum in 7200s |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: configfs: Prevent OOB read/write in usb_string_copy()
Userspace provided string 's' could trivially have the length zero. Left
unchecked this will firstly result in an OOB read in the form
`if (str[0 - 1] == '\n') followed closely by an OOB write in the form
`str[0 - 1] = '\0'`.
There is already a validating check to catch strings that are too long.
Let's supply an additional check for invalid strings that are too short. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: fix race between delayed_work() and ceph_monc_stop()
The way the delayed work is handled in ceph_monc_stop() is prone to
races with mon_fault() and possibly also finish_hunting(). Both of
these can requeue the delayed work which wouldn't be canceled by any of
the following code in case that happens after cancel_delayed_work_sync()
runs -- __close_session() doesn't mess with the delayed work in order
to avoid interfering with the hunting interval logic. This part was
missed in commit b5d91704f53e ("libceph: behave in mon_fault() if
cur_mon < 0") and use-after-free can still ensue on monc and objects
that hang off of it, with monc->auth and monc->monmap being
particularly susceptible to quickly being reused.
To fix this:
- clear monc->cur_mon and monc->hunting as part of closing the session
in ceph_monc_stop()
- bail from delayed_work() if monc->cur_mon is cleared, similar to how
it's done in mon_fault() and finish_hunting() (based on monc->hunting)
- call cancel_delayed_work_sync() after the session is closed |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: aead,cipher - zeroize key buffer after use
I.G 9.7.B for FIPS 140-3 specifies that variables temporarily holding
cryptographic information should be zeroized once they are no longer
needed. Accomplish this by using kfree_sensitive for buffers that
previously held the private key. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/core: Implement a limit on UMAD receive List
The existing behavior of ib_umad, which maintains received MAD
packets in an unbounded list, poses a risk of uncontrolled growth.
As user-space applications extract packets from this list, the rate
of extraction may not match the rate of incoming packets, leading
to potential list overflow.
To address this, we introduce a limit to the size of the list. After
considering typical scenarios, such as OpenSM processing, which can
handle approximately 100k packets per second, and the 1-second retry
timeout for most packets, we set the list size limit to 200k. Packets
received beyond this limit are dropped, assuming they are likely timed
out by the time they are handled by user-space.
Notably, packets queued on the receive list due to reasons like
timed-out sends are preserved even when the list is full. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost_task: Handle SIGKILL by flushing work and exiting
Instead of lingering until the device is closed, this has us handle
SIGKILL by:
1. marking the worker as killed so we no longer try to use it with
new virtqueues and new flush operations.
2. setting the virtqueue to worker mapping so no new works are queued.
3. running all the exiting works. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: avoid overflows in dirty throttling logic
The dirty throttling logic is interspersed with assumptions that dirty
limits in PAGE_SIZE units fit into 32-bit (so that various multiplications
fit into 64-bits). If limits end up being larger, we will hit overflows,
possible divisions by 0 etc. Fix these problems by never allowing so
large dirty limits as they have dubious practical value anyway. For
dirty_bytes / dirty_background_bytes interfaces we can just refuse to set
so large limits. For dirty_ratio / dirty_background_ratio it isn't so
simple as the dirty limit is computed from the amount of available memory
which can change due to memory hotplug etc. So when converting dirty
limits from ratios to numbers of pages, we just don't allow the result to
exceed UINT_MAX.
This is root-only triggerable problem which occurs when the operator
sets dirty limits to >16 TB. |
| In the Linux kernel, the following vulnerability has been resolved:
leds: mlxreg: Use devm_mutex_init() for mutex initialization
In this driver LEDs are registered using devm_led_classdev_register()
so they are automatically unregistered after module's remove() is done.
led_classdev_unregister() calls module's led_set_brightness() to turn off
the LEDs and that callback uses mutex which was destroyed already
in module's remove() so use devm API instead. |
