| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the remote access VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of HTTPS requests. An attacker could exploit this vulnerability by sending crafted HTTPS requests to an affected system. A successful exploit could allow the attacker to cause resource exhaustion, resulting in a DoS condition. |
| A vulnerability in the remote access SSL VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to bypass a configured multiple certificate authentication policy and connect using only a valid username and password. This vulnerability is due to improper error handling during remote access VPN authentication. An attacker could exploit this vulnerability by sending crafted requests during remote access VPN session establishment. A successful exploit could allow the attacker to bypass the configured multiple certificate authentication policy while retaining the privileges and permissions associated with the original connection profile. |
| A vulnerability in the Modbus preprocessor of the Snort detection engine could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to an integer overflow while processing Modbus traffic. An attacker could exploit this vulnerability by sending crafted Modbus traffic through an affected device. A successful exploit could allow the attacker to cause the Snort process to hang, causing traffic inspection to stop.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software and Cisco FXOS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system as root.
This vulnerability is due to improper input validation for specific CLI commands. An attacker could exploit this vulnerability by injecting operating system commands into a legitimate command. A successful exploit could allow the attacker to escape the restricted command prompt and execute arbitrary commands on the underlying operating system. To successfully exploit this vulnerability, an attacker would need valid Administrator credentials. |
| A vulnerability in the internal packet-processing functionality of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Security Appliances could allow an unauthenticated, remote attacker to cause an affected device to stop processing traffic, resulting in a denial of service (DoS) condition. The vulnerability is due to the affected software improperly validating IP Version 4 (IPv4) and IP Version 6 (IPv6) packets after the software reassembles the packets (following IP Fragmentation). An attacker could exploit this vulnerability by sending a series of malicious, fragmented IPv4 or IPv6 packets to an affected device. A successful exploit could allow the attacker to cause Snort processes on the affected device to hang at 100% CPU utilization, which could cause the device to stop processing traffic and result in a DoS condition until the device is reloaded manually. This vulnerability affects Cisco Firepower Threat Defense (FTD) Software Releases 6.2.1 and 6.2.2, if the software is running on a Cisco Firepower 2100 Series Security Appliance. Cisco Bug IDs: CSCvf91098. |
| Multiple vulnerabilities in the Server Message Block Version 2 (SMB2) processor of the Snort detection engine on multiple Cisco products could allow an unauthenticated, remote attacker to bypass the configured policies or cause a denial of service (DoS) condition on an affected device.
These vulnerabilities are due to improper management of system resources when the Snort detection engine is processing SMB2 traffic. An attacker could exploit these vulnerabilities by sending a high rate of certain types of SMB2 packets through an affected device. A successful exploit could allow the attacker to trigger a reload of the Snort process, resulting in a DoS condition.
Note: When the snort preserve-connection option is enabled for the Snort detection engine, a successful exploit could also allow the attacker to bypass the configured policies and deliver a malicious payload to the protected network. The snort preserve-connection setting is enabled by default. See the Details ["#details"] section of this advisory for more information.
Note: Only products that have Snort 3 configured are affected. Products that are configured with Snort 2 are not affected. |
| Multiple vulnerabilities in the payload inspection for Ethernet Industrial Protocol (ENIP) traffic for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured rules for ENIP traffic. These vulnerabilities are due to incomplete processing during deep packet inspection for ENIP packets. An attacker could exploit these vulnerabilities by sending a crafted ENIP packet to the targeted interface. A successful exploit could allow the attacker to bypass configured access control and intrusion policies that should be activated for the ENIP packet. |
| A vulnerability in the WebVPN service of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper management of authenticated sessions in the WebVPN portal. An attacker could exploit this vulnerability by authenticating with valid credentials and accessing a specific URL in the WebVPN portal. A successful exploit could allow the attacker to cause the device to reload, resulting in a temporary DoS condition. |
| A vulnerability in the data acquisition (DAQ) component of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured access control policies or cause a denial of service (DoS) condition. The vulnerability exists because the affected software improperly manages system memory resources when inspecting traffic. An attacker could exploit this vulnerability by generating specific traffic patterns for the software to inspect. A successful exploit could allow the attacker to exhaust system memory resources used for traffic inspection. Depending on the configuration, the FTD Software could fail open and cease to inspect traffic or fail closed and result in a DoS condition. This vulnerability may require manual intervention to restore the software. |
| A vulnerability in the Internet Key Exchange Version 2 Mobility and Multihoming Protocol (MOBIKE) feature for the Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a memory leak or a reload of an affected device that leads to a denial of service (DoS) condition. The vulnerability is due to the incorrect processing of certain MOBIKE packets. An attacker could exploit this vulnerability by sending crafted MOBIKE packets to an affected device to be processed. A successful exploit could cause an affected device to continuously consume memory and eventually reload, resulting in a DoS condition. The MOBIKE feature is supported only for IPv4 addresses. |
| A vulnerability in the AnyConnect firewall for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured access control list (ACL) and allow traffic that should have been denied to flow through an affected device. This vulnerability is due to a logic error in populating group ACLs when an AnyConnect client establishes a new session toward an affected device. An attacker could exploit this vulnerability by establishing an AnyConnect connection to the affected device. A successful exploit could allow the attacker to bypass configured ACL rules. |
| A vulnerability in the interaction between the TCP Intercept feature and the Snort 3 detection engine on Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured policies on an affected system. Devices that are configured with Snort 2 are not affected by this vulnerability.
This vulnerability is due to a logic error when handling embryonic (half-open) TCP connections. An attacker could exploit this vulnerability by sending a crafted traffic pattern through an affected device. A successful exploit could allow unintended traffic to enter the network protected by the affected device. |
| IBM Cognos Analytics 12.1.3 GA Version with build number through 12.1.3-2606251736 could allow an attacker to obtain incorrect report summary results or cause report-processing failures due to a race condition in the Agentic AI assistant's concurrent request-handling logic when multiple authenticated users submit report-related tasks simultaneously. |
| Acrobat Reader is affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Improper neutralization of special elements used in an os command ('os command injection') in GitHub Copilot and Visual Studio Code allows an unauthorized attacker to elevate privileges locally. |
| A flaw was found in the RHOAI training-operator. This vulnerability allows a user with standard edit or admin roles in any Kubernetes namespace to escalate their privileges. Through the creation of training jobs, an attacker can impersonate service accounts, access the host filesystem, and potentially execute arbitrary code remotely. This issue arises from the aggregation of training job permissions onto native Kubernetes edit and admin ClusterRoles, coupled with unrestricted PodTemplateSpec passthrough. |
| In Eclipse OpenJ9 versions up to 0.60, using -Xtrace to trace method arguments can lead to buffer underflow. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qualcomm: rmnet: fix endpoint use-after-free in rmnet_dellink()
rmnet_dellink() removes the endpoint from the hash table with
hlist_del_init_rcu() and then immediately frees it with kfree(). However,
RCU readers on the receive path (rmnet_rx_handler ->
__rmnet_map_ingress_handler) may still hold a reference to the endpoint and
dereference ep->egress_dev after the memory has been freed. The endpoint is
a kmalloc-32 object, and the stale read at offset 8 corresponds to the
egress_dev pointer.
BUG: unable to handle page fault for address: ffffffffde942eef
Oops: 0002 [#1] SMP NOPTI
CPU: 1 UID: 0 PID: 137 Comm: poc_write Not tainted 7.0.0+ #4 PREEMPTLAZY
RIP: 0010:rmnet_vnd_rx_fixup (rmnet_vnd.c:27)
Call Trace:
<TASK>
__rmnet_map_ingress_handler (rmnet_handlers.c:48 rmnet_handlers.c:101)
rmnet_rx_handler (rmnet_handlers.c:129 rmnet_handlers.c:235)
__netif_receive_skb_core.constprop.0 (net/core/dev.c:6096)
__netif_receive_skb_one_core (net/core/dev.c:6208)
netif_receive_skb (net/core/dev.c:6467)
tun_get_user (drivers/net/tun.c:1955)
tun_chr_write_iter (drivers/net/tun.c:2003)
vfs_write (fs/read_write.c:688)
ksys_write (fs/read_write.c:740)
</TASK>
Add an rcu_head field to struct rmnet_endpoint and replace kfree() with
kfree_rcu() so the endpoint memory remains valid through the RCU grace
period. Also remove the rmnet_vnd_dellink() call and inline only the
nr_rmnet_devs decrement, since rmnet_vnd_dellink() would set
ep->egress_dev to NULL during the grace period, creating a data race
with lockless readers. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: fix race between dump and ip_set_list resize
The release path of ip_set_dump_do() and ip_set_dump_done() read
inst->ip_set_list via ip_set_ref_netlink(), a plain rcu_dereference_raw()
of the array pointer. These run from netlink_recvmsg() without the nfnl
mutex and without an RCU read-side critical section.
A concurrent ip_set_create() can grow the array: it publishes the new
array, calls synchronize_net() and then kvfree()s the old one. Since the
dump paths read the array outside any RCU reader, synchronize_net() does
not wait for them and the old array can be freed while they still index
into it, causing a use-after-free.
The dumped set itself stays pinned via set->ref_netlink, so only the
array load needs protecting. Take rcu_read_lock() around it, matching
ip_set_get_byname() and __ip_set_put_byindex().
BUG: KASAN: slab-use-after-free in ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697)
Read of size 8 at addr ffff88800b5c4018 by task exploit/150
Call Trace:
...
kasan_report (mm/kasan/report.c:595)
ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697)
netlink_dump (net/netlink/af_netlink.c:2325)
netlink_recvmsg (net/netlink/af_netlink.c:1976)
sock_recvmsg (net/socket.c:1159)
__sys_recvfrom (net/socket.c:2315)
...
Oops: general protection fault, probably for non-canonical address ... KASAN NOPTI
KASAN: maybe wild-memory-access in range [0x02d6...d0-0x02d6...d7]
RIP: 0010:ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1698)
Kernel panic - not syncing: Fatal exception |
| In Eclipse OMR versions up to 0.11, the arraycmp SIMD implementation for Z and P does not check if the number of bytes to compare is zero. |
