| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
cpu: hotplug: Bound hotplug states sysfs output
states_show() adds CPU hotplug state names into a single sysfs buffer
using sprintf(). With enough registered states, this can write past the
end of the PAGE_SIZE buffer.
Use sysfs_emit_at() so output is bounded. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Sync page pool RX frags for CPU
MANA allocates RX buffers from page pool fragments when frag_count is
greater than 1. In that case the buffers remain DMA mapped by page pool
and the RX completion path does not call dma_unmap_single(). As a result,
the implicit sync-for-CPU normally performed by dma_unmap_single() is
missing before the packet data is passed to the networking stack.
This breaks RX on configurations which require explicit DMA syncing, for
example when booted with swiotlb=force.
Fix this by recording the page pool page and DMA sync offset when the RX
buffer is allocated, and syncing the received packet range for CPU access
before handing the RX buffer to the stack. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sit: require CAP_NET_ADMIN in the device netns for changelink
ipip6_changelink() operates on at most two netns, dev_net(dev) and the
tunnel link netns t->net. They differ once the device is created in or
moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in t->net can rewrite a tunnel that
lives in t->net.
Gate ipip6_changelink() on rtnl_dev_link_net_capable() at its top,
before any attribute is parsed. sit was the one tunnel type not covered
by the recent series that added this check to the other changelink()
handlers. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Fix missing dirty page tracking in {pte,pmd}_wrprotect()
When hardware page table walker (PTW) is enabled on LoongArch, the CPU
may set _PAGE_DIRTY directly in the page table entry during a write TLB
miss, without going through the software TLB store handler. The software
TLB store handler (tlbex.S:254) sets both _PAGE_DIRTY and_PAGE_MODIFIED
together:
ori t0, t0, (_PAGE_VALID | _PAGE_DIRTY | _PAGE_MODIFIED)
Since hardware PTW only sets _PAGE_DIRTY, the software-only bit, i.e.
_PAGE_MODIFIED is left unchanged. This creates a window where a PTE has
_PAGE_DIRTY set (hardware knows the page is dirty) but _PAGE_MODIFIED
clear (software is unaware).
When fork()/clone() triggers copy-on-write, __copy_present_ptes() calls
pte_wrprotect(), which unconditionally clears both the _PAGE_WRITE and
_PAGE_DIRTY bits:
pte_val(pte) &= ~(_PAGE_WRITE | _PAGE_DIRTY);
Since _PAGE_MODIFIED was never set, the dirtiness information is lost
completely. Subsequently, when memory pressure triggers page reclaim,
page_mkclean() / try_to_unmap() sees the page as clean (i.e. pte_dirty()
returns false) and the page may be freed without writeback, causing data
corruption.
Fix this by propagating the _PAGE_DIRTY bit to the _PAGE_MODIFIED bit in
both pte_wrprotect() and pmd_wrprotect() before clearing writeable bits:
if (pte_val(pte) & _PAGE_DIRTY)
pte_val(pte) |= _PAGE_MODIFIED;
The pmd_wrprotect() fix handles the CONFIG_TRANSPARENT_HUGEPAGE case,
where pmd entries need the same treatment.
This ensures the software dirty tracking bit (checked by pte_dirty() and
pmd_dirty(), which read both the _PAGE_DIRTY and _PAGE_MODIFIED bits) is
preserved across fork COW write-protection.
The issue was found by the LTP madvise09 test case, which exercises page
reclaim after "madvise(MADV_FREE), write and fork" operation sequence on
private anonymous mappings. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_taprio: Replace direct dequeue call with peek and qdisc_dequeue_peeked
When taprio's software path peeks a non-work-conserving child qdisc, the
child stashes the peeked skb in its gso_skb; taprio_dequeue_from_txq()
then takes the packet with a direct child ->dequeue() call, which ignores
that stash, orphans the peeked skb and desyncs the child's qlen/backlog.
With a qfq child this re-enters the child on an emptied list and
dereferences NULL, panicking the kernel from softirq on ordinary egress.
Take the packet through qdisc_dequeue_peeked(), as sch_red and sch_sfb
now do. The helper returns the child's stashed skb first and is a no-op
when there is none, so a work-conserving child is unaffected and the
gated path now consumes the skb whose length was charged to the budget. |
| In the Linux kernel, the following vulnerability has been resolved:
orangefs: keep the readdir entry size 64-bit in fill_from_part()
fill_from_part() computes the size of a directory entry in size_t but
stores it in a __u32. An entry length near U32_MAX wraps it to a small
value, bypasses the bounds check, and is then used to index the entry,
reading far past the directory part -- an out-of-bounds read that oopses
the kernel.
Compute the size as a u64 so it cannot truncate; the bounds check then
rejects the entry. The trailer is supplied by the userspace client. |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: iosm: bound device offsets in the MUX downlink decoder
mux_dl_adb_decode() walks a chain of aggregated datagram tables using
offsets and lengths taken from the modem. first_table_index,
next_table_index, table_length, datagram_index and datagram_length are
all device supplied le values. Only first_table_index was checked, and
only for being non zero. The decoder then formed adth = block +
adth_index and read the table header and the datagram entries with no
bound against the received skb. A modem that reports an index or a
length past the downlink buffer makes the decoder read out of bounds.
The buffer is IPC_MEM_MAX_DL_MUX_LITE_BUF_SIZE and skb->len is at most
that, so skb->len is the real limit, but none of these in band offsets
were checked against it.
The table chain is also followed with no forward progress check. The loop
takes the next table from adth->next_table_index and stops only when that
reaches zero. A modem can stage two tables that point at each other, so
the loop never ends. It runs in softirq and clones the skb on every pass.
Validate every device offset and length against skb->len before use.
The block header must fit. Each table header, on entry and after every
next_table_index, must lie inside the skb. The datagram table must fit.
Each datagram index and length must stay inside the skb. The header
padding must not exceed the datagram length so the receive length does
not wrap. Require each next_table_index to move forward so the chain
cannot cycle.
This was reproduced under KASAN as a slab out of bounds read on a normal
downlink receive once the iosm net device is up. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/compaction: handle free_pages_prepare() properly in compaction_free()
free_pages_prepare() can fail but compaction_free() does not handle the
failure case. Failed pages should not be added back to cc->freepages for
future use, since they can be either PageHWPoison or free_page_is_bad()
and might cause data corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
mac802154: remove interfaces with RCU list deletion
Queue wake, stop, and disable paths walk local->interfaces under RCU.
The bulk hardware teardown path removes entries with list_del(), so an
asynchronous transmit completion can follow a poisoned list node in
ieee802154_wake_queue().
Use list_del_rcu() as in the single-interface removal path. The following
unregister_netdevice() waits for in-flight RCU readers before freeing the
netdevice, so no separate grace-period wait is needed. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: use parsed transport offset in SCTP state lookup
set_sctp_state() reads the SCTP chunk header again in order to drive the
IPVS SCTP state table. For IPv6 it computes the offset with
sizeof(struct ipv6hdr), while the surrounding IPVS code uses iph.len from
ip_vs_fill_iph_skb(), where ipv6_find_hdr() has already skipped
extension headers and found the real transport header.
This makes the state machine read from the wrong offset for IPv6 SCTP
packets that carry extension headers. For example, an INIT packet with an
8-byte destination options header can be scheduled correctly by
sctp_conn_schedule(), but set_sctp_state() reads the first byte of the
SCTP verification tag as a DATA chunk type. The connection then moves
from NONE to ESTABLISHED instead of INIT1, gets the longer established
timeout, and updates the active/inactive destination counters
incorrectly. This happens even though the SCTP handshake has not
completed.
Use the parsed transport offset passed down from ip_vs_set_state() for
the SCTP chunk-header lookup. For IPv4 and IPv6 packets without
extension headers this preserves the existing offset. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: reset full ip_vs_seq structs in ip_vs_conn_new
Commit 9a05475cebdd ("ipvs: avoid kmem_cache_zalloc in
ip_vs_conn_new") changed ip_vs_conn_new() to allocate an ip_vs_conn
object with kmem_cache_alloc(). The function then initializes many
fields explicitly, but only resets in_seq.delta and out_seq.delta in the
two struct ip_vs_seq members.
That leaves init_seq and previous_delta uninitialized. This is normally
harmless while the corresponding IP_VS_CONN_F_IN_SEQ or
IP_VS_CONN_F_OUT_SEQ flag is clear. For connections learned from a sync
message, however, ip_vs_proc_conn() preserves those flags from
IP_VS_CONN_F_BACKUP_MASK and passes opt=NULL when the message omits
IPVS_OPT_SEQ_DATA. In that case the new connection can be hashed with
SEQ flags set but with the rest of in_seq/out_seq still containing stale
slab data.
When a packet for such a connection is later handled by an IPVS
application helper, vs_fix_seq() and vs_fix_ack_seq() use
previous_delta and init_seq to rewrite TCP sequence numbers. A malformed
sync message can therefore make forwarded packets carry stale slab bytes
in their TCP seq/ack numbers, and can also corrupt the forwarded TCP
flow.
Reset both struct ip_vs_seq members completely before publishing the
connection. This matches the existing "reset struct ip_vs_seq" comment
and keeps the sequence-adjustment gates inactive unless valid sequence
data is installed later. |
| In the Linux kernel, the following vulnerability has been resolved:
macsec: don't read an unset MAC header in macsec_encrypt()
macsec_encrypt() reads the Ethernet header via eth_hdr(skb)
(skb->head + skb->mac_header) to memmove() the 12 source/destination MAC
bytes forward and make room for the SecTAG.
On the AF_PACKET SOCK_RAW + PACKET_QDISC_BYPASS transmit path the skb
reaches the macsec ndo_start_xmit() with the MAC header unset, so
eth_hdr(skb) resolves to skb->head + (u16)~0 and the read is out of
bounds: a 12-byte heap over-read that is also emitted on the wire as the
frame's outer source/destination MAC. KASAN reports a slab-out-of-bounds
read in macsec_start_xmit() on 6.0; on current mainline a CONFIG_DEBUG_NET
build flags it as an unset mac header in skb_mac_header().
On the TX path the L2 header is at skb->data, so use skb_eth_hdr(), added
by commit 96cc4b69581d ("macvlan: do not assume mac_header is set in
macvlan_broadcast()") for exactly this purpose. |
| In the Linux kernel, the following vulnerability has been resolved:
dibs: loopback: validate offset and size in move_data()
The loopback move_data() performs a memcpy into the registered DMB
without checking whether offset + size exceeds the DMB length. Unlike
real ISM hardware, which enforces memory region bounds natively, the
software loopback has no such protection.
A peer-supplied out-of-bounds offset or oversized write would result in
an OOB write past the allocated kernel buffer. Add an explicit bounds
check before the memcpy to reject such requests with -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/osnoise: Call synchronize_rcu() when unregistering
This ensures that any RCU readers traversing the instance list
have finished, before releasing the reference on the tracer that
the instance points to. |
| In the Linux kernel, the following vulnerability has been resolved:
pmdomain: imx93-blk-ctrl: Extract PHY as shared domain for DSI/CSI
The MIPI DSI and CSI domains share control bits for clock and reset, which
can lead to incorrect behavior if one domain disables the shared resource
while the other is still active.
To fix the issue, introduce a shared MIPI PHY power domain to own the
common resources and make DSI and CSI its subdomains. This ensures the
shared bits are properly managed and not disabled while still in use. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rt2x00: avoid full teardown before work setup in probe
rt2x00lib_probe_dev() uses the full rt2x00lib_remove_dev() teardown for
all probe failures. However, drv_data allocation and workqueue allocation
can fail before intf_work, autowakeup_work and sleep_work have been
initialized.
Do not enter the full remove path until the probe has reached the point
where those work items are set up. Return directly for drv_data allocation
failure, and use a small early cleanup path for workqueue allocation
failure.
This issue was found by our static analysis tool and then confirmed by
manual review of rt2x00lib_probe_dev() and rt2x00lib_remove_dev(). The
early probe exits should not call a common teardown path that assumes the
later work setup has already completed.
A QEMU PoC forced alloc_ordered_workqueue() to fail before the work
initializers are reached. The resulting fail path entered
rt2x00lib_remove_dev(), and DEBUG_OBJECTS reported invalid work drains with
rt2x00lib_probe_dev() and rt2x00lib_remove_dev() in the stack. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: cyw: fix heap overflow on a short auth frame
brcmf_notify_auth_frame_rx() takes the frame length from the firmware
event and copies the frame body with the management header offset
subtracted:
u32 mgmt_frame_len = e->datalen - sizeof(struct brcmf_rx_mgmt_data);
...
memcpy(&mgmt_frame->u, frame,
mgmt_frame_len - offsetof(struct ieee80211_mgmt, u));
The only length check is e->datalen >= sizeof(*rxframe), so mgmt_frame_len
can be anything from 0 up. offsetof(struct ieee80211_mgmt, u) is 24. When
mgmt_frame_len is below that, the subtraction wraps as an unsigned value to
a huge length. The memcpy then runs far past the kzalloc'd buffer. A
malicious or malfunctioning AP can make the frame short during the
external SAE auth exchange, so this is a remotely triggered heap overflow.
Reject frames shorter than the management header offset before the copy. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: fix more places with wrong ipv6 transport offsets
Sashiko reports for more incorrect IPv6 transport offsets.
The app code for TCP was assuming IPv4 network header
even after the ipvsh argument was provided. This can
cause problems with apps over IPv6. As for the only
official app in the kernel tree (FTP) this problem is
harmless because we use Netfilter to mangle the FTP
ports and we do not adjust the TCP seq numbers.
Also, provide correct offset of the ICMPV6 header in
ip_vs_out_icmp_v6() for correct checksum checks when
the IPv6 packet has extension headers. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: reload ip header after head reallocation
__ip_vs_get_out_rt() calls skb_ensure_writable() which may
reallocate skb->head. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/spufs: fix out-of-bounds access in spufs_mem_mmap_access()
spufs_mem_mmap_access() computes the local store offset as
address - vma->vm_start, but bounds-checks it against vma->vm_end
instead of the local store size. On 64-bit, offset is always well
below vma->vm_end, so the clamp never fires and len stays unbounded
against the LS_SIZE buffer returned by ctx->ops->get_ls().
Reject offsets at or beyond LS_SIZE and clamp len to the remaining
space, mirroring the guard already used by spufs_mem_mmap_fault() and
spufs_ps_fault(). |
