| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| When BIG-IP AFM or BIG-IP DDoS is provisioned, undisclosed traffic can cause TMM to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| Improper Input Validation vulnerability in Apache Tomcat Native, Apache Tomcat.
When using an OCSP responder, Tomcat Native (and Tomcat's FFM port of the Tomcat Native code) did not complete verification or freshness checks on the OCSP response which could allow certificate revocation to be bypassed.
This issue affects Apache Tomcat Native: from 1.3.0 through 1.3.4, from 2.0.0 through 2.0.11; Apache Tomcat: from 11.0.0-M1 through 11.0.17, from 10.1.0-M7 through 10.1.51, from 9.0.83 through 9.0.114.
The following versions were EOL at the time the CVE was created but are
known to be affected: from 1.1.23 through 1.1.34, from 1.2.0 through 1.2.39. Older EOL versions are not affected.
Apache Tomcat Native users are recommended to upgrade to versions 1.3.5 or later or 2.0.12 or later, which fix the issue.
Apache Tomcat users are recommended to upgrade to versions 11.0.18 or later, 10.1.52 or later or 9.0.115 or later which fix the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/mmcid: Don't assume CID is CPU owned on mode switch
Shinichiro reported a KASAN UAF, which is actually an out of bounds access
in the MMCID management code.
CPU0 CPU1
T1 runs in userspace
T0: fork(T4) -> Switch to per CPU CID mode
fixup() set MM_CID_TRANSIT on T1/CPU1
T4 exit()
T3 exit()
T2 exit()
T1 exit() switch to per task mode
---> Out of bounds access.
As T1 has not scheduled after T0 set the TRANSIT bit, it exits with the
TRANSIT bit set. sched_mm_cid_remove_user() clears the TRANSIT bit in
the task and drops the CID, but it does not touch the per CPU storage.
That's functionally correct because a CID is only owned by the CPU when
the ONCPU bit is set, which is mutually exclusive with the TRANSIT flag.
Now sched_mm_cid_exit() assumes that the CID is CPU owned because the
prior mode was per CPU. It invokes mm_drop_cid_on_cpu() which clears the
not set ONCPU bit and then invokes clear_bit() with an insanely large
bit number because TRANSIT is set (bit 29).
Prevent that by actually validating that the CID is CPU owned in
mm_drop_cid_on_cpu(). |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix UAF issue for file-backed mounts w/ directio option
[ 9.269940][ T3222] Call trace:
[ 9.269948][ T3222] ext4_file_read_iter+0xac/0x108
[ 9.269979][ T3222] vfs_iocb_iter_read+0xac/0x198
[ 9.269993][ T3222] erofs_fileio_rq_submit+0x12c/0x180
[ 9.270008][ T3222] erofs_fileio_submit_bio+0x14/0x24
[ 9.270030][ T3222] z_erofs_runqueue+0x834/0x8ac
[ 9.270054][ T3222] z_erofs_read_folio+0x120/0x220
[ 9.270083][ T3222] filemap_read_folio+0x60/0x120
[ 9.270102][ T3222] filemap_fault+0xcac/0x1060
[ 9.270119][ T3222] do_pte_missing+0x2d8/0x1554
[ 9.270131][ T3222] handle_mm_fault+0x5ec/0x70c
[ 9.270142][ T3222] do_page_fault+0x178/0x88c
[ 9.270167][ T3222] do_translation_fault+0x38/0x54
[ 9.270183][ T3222] do_mem_abort+0x54/0xac
[ 9.270208][ T3222] el0_da+0x44/0x7c
[ 9.270227][ T3222] el0t_64_sync_handler+0x5c/0xf4
[ 9.270253][ T3222] el0t_64_sync+0x1bc/0x1c0
EROFS may encounter above panic when enabling file-backed mount w/
directio mount option, the root cause is it may suffer UAF in below
race condition:
- z_erofs_read_folio wq s_dio_done_wq
- z_erofs_runqueue
- erofs_fileio_submit_bio
- erofs_fileio_rq_submit
- vfs_iocb_iter_read
- ext4_file_read_iter
- ext4_dio_read_iter
- iomap_dio_rw
: bio was submitted and return -EIOCBQUEUED
- dio_aio_complete_work
- dio_complete
- dio->iocb->ki_complete (erofs_fileio_ki_complete())
- kfree(rq)
: it frees iocb, iocb.ki_filp can be UAF in file_accessed().
- file_accessed
: access NULL file point
Introduce a reference count in struct erofs_fileio_rq, and initialize it
as two, both erofs_fileio_ki_complete() and erofs_fileio_rq_submit() will
decrease reference count, the last one decreasing the reference count
to zero will free rq. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix infinite loop caused by next_smb2_rcv_hdr_off reset in error paths
The problem occurs when a signed request fails smb2 signature verification
check. In __process_request(), if check_sign_req() returns an error,
set_smb2_rsp_status(work, STATUS_ACCESS_DENIED) is called.
set_smb2_rsp_status() set work->next_smb2_rcv_hdr_off as zero. By resetting
next_smb2_rcv_hdr_off to zero, the pointer to the next command in the chain
is lost. Consequently, is_chained_smb2_message() continues to point to
the same request header instead of advancing. If the header's NextCommand
field is non-zero, the function returns true, causing __handle_ksmbd_work()
to repeatedly process the same failed request in an infinite loop.
This results in the kernel log being flooded with "bad smb2 signature"
messages and high CPU usage.
This patch fixes the issue by changing the return value from
SERVER_HANDLER_CONTINUE to SERVER_HANDLER_ABORT. This ensures that
the processing loop terminates immediately rather than attempting to
continue from an invalidated offset. |
| In the Linux kernel, the following vulnerability has been resolved:
mm, swap: restore swap_space attr aviod kernel panic
commit 8b47299a411a ("mm, swap: mark swap address space ro and add context
debug check") made the swap address space read-only. It may lead to
kernel panic if arch_prepare_to_swap returns a failure under heavy memory
pressure as follows,
el1_abort+0x40/0x64
el1h_64_sync_handler+0x48/0xcc
el1h_64_sync+0x84/0x88
errseq_set+0x4c/0xb8 (P)
__filemap_set_wb_err+0x20/0xd0
shrink_folio_list+0xc20/0x11cc
evict_folios+0x1520/0x1be4
try_to_shrink_lruvec+0x27c/0x3dc
shrink_one+0x9c/0x228
shrink_node+0xb3c/0xeac
do_try_to_free_pages+0x170/0x4f0
try_to_free_pages+0x334/0x534
__alloc_pages_direct_reclaim+0x90/0x158
__alloc_pages_slowpath+0x334/0x588
__alloc_frozen_pages_noprof+0x224/0x2fc
__folio_alloc_noprof+0x14/0x64
vma_alloc_zeroed_movable_folio+0x34/0x44
do_pte_missing+0xad4/0x1040
handle_mm_fault+0x4a4/0x790
do_page_fault+0x288/0x5f8
do_translation_fault+0x38/0x54
do_mem_abort+0x54/0xa8
Restore swap address space as not ro to avoid the panic. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Delay module unload while fabric scan in progress
System crash seen during load/unload test in a loop.
[105954.384919] RBP: ffff914589838dc0 R08: 0000000000000000 R09: 0000000000000086
[105954.384920] R10: 000000000000000f R11: ffffa31240904be5 R12: ffff914605f868e0
[105954.384921] R13: ffff914605f86910 R14: 0000000000008010 R15: 00000000ddb7c000
[105954.384923] FS: 0000000000000000(0000) GS:ffff9163fec40000(0000) knlGS:0000000000000000
[105954.384925] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[105954.384926] CR2: 000055d31ce1d6a0 CR3: 0000000119f5e001 CR4: 0000000000770ee0
[105954.384928] PKRU: 55555554
[105954.384929] Call Trace:
[105954.384931] <IRQ>
[105954.384934] qla24xx_sp_unmap+0x1f3/0x2a0 [qla2xxx]
[105954.384962] ? qla_async_scan_sp_done+0x114/0x1f0 [qla2xxx]
[105954.384980] ? qla24xx_els_ct_entry+0x4de/0x760 [qla2xxx]
[105954.384999] ? __wake_up_common+0x80/0x190
[105954.385004] ? qla24xx_process_response_queue+0xc2/0xaa0 [qla2xxx]
[105954.385023] ? qla24xx_msix_rsp_q+0x44/0xb0 [qla2xxx]
[105954.385040] ? __handle_irq_event_percpu+0x3d/0x190
[105954.385044] ? handle_irq_event+0x58/0xb0
[105954.385046] ? handle_edge_irq+0x93/0x240
[105954.385050] ? __common_interrupt+0x41/0xa0
[105954.385055] ? common_interrupt+0x3e/0xa0
[105954.385060] ? asm_common_interrupt+0x22/0x40
The root cause of this was that there was a free (dma_free_attrs) in the
interrupt context. There was a device discovery/fabric scan in
progress. A module unload was issued which set the UNLOADING flag. As
part of the discovery, after receiving an interrupt a work queue was
scheduled (which involved a work to be queued). Since the UNLOADING
flag is set, the work item was not allocated and the mapped memory had
to be freed. The free occurred in interrupt context leading to system
crash. Delay the driver unload until the fabric scan is complete to
avoid the crash. |
| In the Linux kernel, the following vulnerability has been resolved:
md: suspend array while updating raid_disks via sysfs
In raid1_reshape(), freeze_array() is called before modifying the r1bio
memory pool (conf->r1bio_pool) and conf->raid_disks, and
unfreeze_array() is called after the update is completed.
However, freeze_array() only waits until nr_sync_pending and
(nr_pending - nr_queued) of all buckets reaches zero. When an I/O error
occurs, nr_queued is increased and the corresponding r1bio is queued to
either retry_list or bio_end_io_list. As a result, freeze_array() may
unblock before these r1bios are released.
This can lead to a situation where conf->raid_disks and the mempool have
already been updated while queued r1bios, allocated with the old
raid_disks value, are later released. Consequently, free_r1bio() may
access memory out of bounds in put_all_bios() and release r1bios of the
wrong size to the new mempool, potentially causing issues with the
mempool as well.
Since only normal I/O might increase nr_queued while an I/O error occurs,
suspending the array avoids this issue.
Note: Updating raid_disks via ioctl SET_ARRAY_INFO already suspends
the array. Therefore, we suspend the array when updating raid_disks
via sysfs to avoid this issue too. |
| Improper Input Validation vulnerability.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.14, from 10.1.0-M1 through 10.1.49, from 9.0.0-M1 through 9.0.112.
The following versions were EOL at the time the CVE was created but are
known to be affected: 8.5.0 through 8.5.100. Older EOL versions are not affected.
Tomcat did not validate that the host name provided via the SNI
extension was the same as the host name provided in the HTTP host header
field. If Tomcat was configured with more than one virtual host and the
TLS configuration for one of those hosts did not require client
certificate authentication but another one did, it was possible for a
client to bypass the client certificate authentication by sending
different host names in the SNI extension and the HTTP host header field.
The vulnerability only applies if client certificate authentication is
only enforced at the Connector. It does not apply if client certificate
authentication is enforced at the web application.
Users are recommended to upgrade to version 11.0.15 or later, 10.1.50 or later or 9.0.113 or later, which fix the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: Implement settime64 as stub for MVM/MLD PTP
Since commit dfb073d32cac ("ptp: Return -EINVAL on ptp_clock_register if
required ops are NULL"), PTP clock registered through ptp_clock_register
is required to have ptp_clock_info.settime64 set, however, neither MVM
nor MLD's PTP clock implementation sets it, resulting in warnings when
the interface starts up, like
WARNING: drivers/ptp/ptp_clock.c:325 at ptp_clock_register+0x2c8/0x6b8, CPU#1: wpa_supplicant/469
CPU: 1 UID: 0 PID: 469 Comm: wpa_supplicant Not tainted 6.18.0+ #101 PREEMPT(full)
ra: ffff800002732cd4 iwl_mvm_ptp_init+0x114/0x188 [iwlmvm]
ERA: 9000000002fdc468 ptp_clock_register+0x2c8/0x6b8
iwlwifi 0000:01:00.0: Failed to register PHC clock (-22)
I don't find an appropriate firmware interface to implement settime64()
for iwlwifi MLD/MVM, thus instead create a stub that returns
-EOPTNOTSUPP only, suppressing the warning and allowing the PTP clock to
be registered. |
| A flaw has been found in ChaiScript up to 6.1.0. This affects the function chaiscript::Type_Info::bare_equal of the file include/chaiscript/dispatchkit/type_info.hpp. This manipulation causes use after free. The attack requires local access. The attack's complexity is rated as high. The exploitability is reported as difficult. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| The Gutenberg Blocks with AI by Kadence WP plugin for WordPress is vulnerable to Missing Authorization in all versions up to, and including, 3.6.1. This is due to a missing capability check in the `process_image_data_ajax_callback()` function which handles the `kadence_import_process_image_data` AJAX action. The function's authorization check via `verify_ajax_call()` only validates `edit_posts` capability but fails to check for the `upload_files` capability. This makes it possible for authenticated attackers, with Contributor-level access and above, to upload arbitrary images from remote URLs to the WordPress Media Library, bypassing the standard WordPress capability restriction that prevents Contributors from uploading files. |
| A vulnerability was detected in Blossom up to 1.17.1. This vulnerability affects the function content of the file blossom-backend/backend/src/main/java/com/blossom/backend/server/article/draft/ArticleController.java of the component Article Title Handler. The manipulation results in cross site scripting. The attack can be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security vulnerability has been detected in Sciyon Koyuan Thermoelectricity Heat Network Management System 3.0. This affects an unknown part of the file /SISReport/WebReport20/Proxy/AsyncTreeProxy.aspx. The manipulation of the argument PGUID leads to sql injection. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| The WP-DownloadManager plugin for WordPress is vulnerable to Path Traversal in all versions up to, and including, 1.69 via the 'download_path' configuration parameter. This is due to insufficient validation of the download path setting, which allows directory traversal sequences to bypass the WP_CONTENT_DIR prefix check. This makes it possible for authenticated attackers, with Administrator-level access and above, to configure the plugin to list and access arbitrary files on the server by exploiting the file browser functionality. |
| The Private Comment plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'Label text' setting in all versions up to, and including, 0.0.4. This is due to insufficient input sanitization and output escaping on the plugin's label text option. This makes it possible for authenticated attackers, with Administrator-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installations and installations where unfiltered_html has been disabled. |
| The User Submitted Posts – Enable Users to Submit Posts from the Front End plugin for WordPress is vulnerable to Incorrect Authorization in all versions up to, and including, 20260113. This is due to the `usp_get_submitted_category()` function accepting user-submitted category IDs from the POST body without validating them against the admin-configured allowed categories stored in `usp_options['categories']`. This makes it possible for unauthenticated attackers to assign submitted posts to arbitrary categories, including restricted ones, by crafting a direct POST request with manipulated `user-submitted-category[]` values, bypassing the frontend category restrictions. |
| The YayMail – WooCommerce Email Customizer plugin for WordPress is vulnerable to unauthorized license key deletion due to a missing authorization check on the `/yaymail-license/v1/license/delete` REST endpoint in versions up to, and including, 4.3.2. This makes it possible for authenticated attackers, with Shop Manager-level access and above, to delete the plugin's license key via the '/yaymail-license/v1/license/delete' endpoint granted they can obtain the REST API nonce. |
| The PDF Invoices & Packing Slips for WooCommerce plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 5.6.0 via the `wpo_ips_edi_save_order_customer_peppol_identifiers` AJAX action due to missing capability checks and order ownership validation. This makes it possible for authenticated attackers, with Subscriber-level access and above, to modify Peppol/EDI endpoint identifiers (`peppol_endpoint_id`, `peppol_endpoint_eas`) for any customer by specifying an arbitrary `order_id` parameter on systems using Peppol invoicing. This can affect order routing on the Peppol network and may result in payment disruptions and data leakage. |
| The Kali Forms plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 2.4.8. This is due to the `get_items_permissions_check()` permission callback on the `/kaliforms/v1/forms/{id}` REST API endpoint only checking for the `edit_posts` capability without verifying that the requesting user has ownership or authorization over the specific form resource. This makes it possible for authenticated attackers, with Contributor-level access and above, to read form configuration data belonging to other users (including administrators) by enumerating form IDs. Exposed data includes form field structures, Google reCAPTCHA secret keys (if configured), email notification templates, and server paths. |
