| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
amt: re-read skb header pointers after every pull
Several AMT receive and transmit paths cache a pointer into the skb head
(ip_hdr(), ipv6_hdr(), eth_hdr() or the AMT message header) and then call
a helper that can reallocate that head before the cached pointer is used
again. pskb_may_pull(), ip_mc_may_pull(), ipv6_mc_may_pull(),
iptunnel_pull_header(), ip_mc_check_igmp() and ipv6_mc_check_mld() can all
free the old head and move the data, so a pointer taken before the call
dangles afterwards and the later access is a use-after-free of the freed
head.
The affected sites are:
amt_rcv() caches ip_hdr() before amt_parse_type() pulls, then reads
iph->saddr.
amt_dev_xmit() caches ip_hdr()/ipv6_hdr() before ip_mc_check_igmp()/
ipv6_mc_check_mld() and pskb_may_pull(), then reads the group address.
amt_multicast_data_handler() caches eth_hdr() before pskb_may_pull(),
then writes the L2 header.
amt_membership_query_handler() caches the AMT header, the outer and
inner eth_hdr() and ip_hdr() before iptunnel_pull_header() and several
pulls, then reads and writes them.
amt_igmpv3_report_handler() and amt_mldv2_report_handler() cache
ip_hdr()/ipv6_hdr() and the current group record and read the record
count from the report header inside the record loop, across the
*_mc_may_pull() calls.
amt_update_handler() caches ip_hdr() and the AMT membership-update
header before pskb_may_pull(), iptunnel_pull_header(),
ip_mc_check_igmp() and the report handler, then reads iph->daddr and
amtmu->nonce / amtmu->response_mac.
Fix each site by either snapshotting the scalar that is used after the
pull before the first pull runs, or re-deriving the header pointer from
the skb after the last pull that can move the head. Values that are
stable across the pull (source and group address, the response MAC and
nonce, the record count, the outer source MAC) are snapshotted; pointers
that are written through or read repeatedly are re-derived. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Check bounds in allocate_event_notification_slot
The valid event ids go from 0 to KFD_SIGNAL_EVENT_LIMIT
allocate_event_notification_slot has an option to specify
an event id to allocate at, used by CRIU. We weren't checking
the bounds on that value.
Check them.
v2: Lower bounds check is unecessary because of idr_alloc
already rejecting negative numbers. Upper bounds check should
be KFD_SIGNAL_EVENT_LIMIT since the signal mode mappings might
not yet exist
(cherry picked from commit 6853f1f6cbbeb3f53ebbbd7286536aeb2c5d5f50) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/sdma6.0: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit c17a508a7d652da3728f8bbc481bfffe96d65a87) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx11: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit daa62107452d2451787c4248ca38fa2d1a0cbefd) |
| In the Linux kernel, the following vulnerability has been resolved:
media: airspy: Return queued buffers on start_streaming() failure
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
airspy_start_streaming() returned -ENODEV early when the USB device had
been disconnected (s->udev == NULL) without returning any buffers that
buf_queue() had already accepted. Take v4l2_lock first and jump to the
existing err_clear_bit label, which already drains s->queued_bufs via
vb2_buffer_done(..., VB2_BUF_STATE_QUEUED) before unlocking.
This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo:
Return queued buffers on start_streaming() failure"). |
| In the Linux kernel, the following vulnerability has been resolved:
media: cedrus: skip invalid H.264 reference list entries
Cedrus consumes H.264 ref_pic_list0/ref_pic_list1 entries from the
stateless slice control and later uses their indices to look up
decode->dpb[] in _cedrus_write_ref_list().
Rejecting such controls in cedrus_try_ctrl() would break existing
userspace, since stateless H.264 reference lists may legitimately carry
out-of-range indices for missing references. Instead, guard the actual
DPB lookup in Cedrus and skip entries whose indices do not fit the fixed
V4L2_H264_NUM_DPB_ENTRIES array.
This keeps the fix local to the driver use site and avoids out-of-bounds
reads from malformed or unsupported reference list entries. |
| In the Linux kernel, the following vulnerability has been resolved:
media: meson: vdec: Fix memory leak in error path of vdec_open
The vdec_open() function previously jumped directly to
err_m2m_release when vdec_init_ctrls() failed, skipping
release of the m2m context. This caused a resource leak.
Fix it by introducing a proper err_m2m_ctx_release label
that calls v4l2_m2m_ctx_release(sess->m2m_ctx) before
releasing the m2m device.
This was identified via kmemleak:
unreferenced object 0xffff0000205d6878 (size 8):
comm "v4l_id", pid 5289, jiffies 4294938580
hex dump (first 8 bytes):
40 d2 49 18 00 00 ff ff @.I.....
backtrace (crc d3204599):
kmemleak_alloc+0xc8/0xf0
__kvmalloc_node_noprof+0x60c/0x850
v4l2_ctrl_handler_init_class+0x1b4/0x2e8 [videodev]
vdec_open+0x1f4/0x788 [meson_vdec]
v4l2_open+0x144/0x460 [videodev]
chrdev_open+0x1ac/0x500
do_dentry_open+0x3f0/0xfe8
vfs_open+0x68/0x320
do_open+0x2d8/0x9a8
path_openat+0x1d0/0x4f0
do_filp_open+0x190/0x380
do_sys_openat2+0xf8/0x1b0
__arm64_sys_openat+0x13c/0x1e8
invoke_syscall+0xdc/0x268
el0_svc_common.constprop.0+0x178/0x258
do_el0_svc+0x4c/0x70 |
| In the Linux kernel, the following vulnerability has been resolved:
media: msi2500: Return queued buffers on start_streaming() failure
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
msi2500_start_streaming() had five error paths that all hit this trap
and were further tangled by ret-overwriting between calls:
- -ENODEV when the USB device was already disconnected
- -ERESTARTSYS when mutex_lock_interruptible() was interrupted
- msi2500_set_usb_adc() failure: ret was silently overwritten by
the next call (msi2500_isoc_init), so the error was lost entirely
- msi2500_isoc_init() failure: cleanup_queued_bufs was called, but
the function then fell through to msi2500_ctrl_msg() and again
masked the original error by overwriting ret
- msi2500_ctrl_msg(CMD_START_STREAMING) failure: no cleanup at all,
leaving isoc URBs submitted with no way for the driver to consume
them
Consolidate the error paths into a small goto chain. Every failure
now stops the function, drains the queued-buffer list, and returns
the real error code. The ctrl_msg failure path also rolls back the
preceding msi2500_isoc_init() via msi2500_isoc_cleanup() before
unlocking and draining.
The cleanup helper takes a vb2_buffer_state argument so that the
start_streaming error paths can pass VB2_BUF_STATE_QUEUED (as
expected by userspace on start_streaming failure) while stop_streaming
keeps its existing VB2_BUF_STATE_ERROR semantics.
This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo:
Return queued buffers on start_streaming() failure"). |
| In the Linux kernel, the following vulnerability has been resolved:
media: radio-si476x: Unregister v4l2_device on probe failure
si476x_radio_probe() registers radio->v4l2dev before allocating the V4L2
controls and before registering the video device. If any of those later
steps fails, probe returns through the exit label after freeing only the
control handler.
A failed probe does not call si476x_radio_remove(), so the
v4l2_device_unregister() there is not reached. This leaves the parent
device reference taken by v4l2_device_register() behind on the error path.
Unregister the V4L2 device in the probe error path after freeing the
controls. |
| In the Linux kernel, the following vulnerability has been resolved:
media: stm32: dcmi: unregister notifier on probe failure
dcmi_graph_init() registers the async notifier before dcmi_probe() toggles
the reset line. If reset_control_assert() or reset_control_deassert()
fails afterwards, probe returns through err_cleanup and the driver core
will not call dcmi_remove().
Unregister the notifier before cleaning it up on that error path,
matching the successful remove path and the V4L2 async notifier lifetime
rules.
[hverkuil: added Fixes tag] |
| In the Linux kernel, the following vulnerability has been resolved:
media: sun4i-csi: Return queued buffers on start_streaming() failure
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
sun4i_csi_start_streaming() returned -EINVAL when no matching CSI
format could be found, before any setup (scratch buffer allocation,
pipeline start) had been performed. The remaining error paths already
converge on the err_clear_dma_queue label, which calls
return_all_buffers(..., VB2_BUF_STATE_QUEUED) under csi->qlock. Jump
to that label directly: the intermediate err_disable_device /
err_disable_pipeline / err_free_scratch_buffer labels are skipped,
which is correct because nothing they would undo has happened yet.
This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo:
Return queued buffers on start_streaming() failure"). |
| In the Linux kernel, the following vulnerability has been resolved:
media: ti: vpe: unwind v4l2 device registration on probe error
If the vpe_top resource is missing, vpe_probe() returns -ENODEV after
v4l2_device_register() has succeeded. Probe failures do not call the
driver's remove callback, so the v4l2 device remains registered on that
error path.
Route that failure through the existing v4l2_device_unregister() unwind
label, matching the other errors after v4l2_device_register(). |
| In the Linux kernel, the following vulnerability has been resolved:
media: vivid: check for vb2_is_busy() when toggling caps
The vivid_update_format_cap/out() functions must only be called if the
capture/output queue are not busy. But for the controls that select
the CROP/COMPOSE/SCALE capability that is not checked.
Only when streaming starts will they be set to 'grabbed' and it is
impossible to change the control, but between REQBUFS and STREAMON you
are still allowed to set these controls. Since vivid_update_format_cap/out
will change the format, this can cause unexpected results.
Besides adding these checks, also add a WARN_ON in
vivid_update_format_cap/out() if the queue is busy.
I'm 90% certain that this is the cause of this syzbot bug:
https://syzkaller.appspot.com/bug?extid=dac8f5eaa46837e97b89
But since we never have reproducers, it is hard to be certain. In any case,
these checks are needed regardless. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wilc1000: validate assoc response length before subtracting header
wilc_parse_assoc_resp_info() computes the trailing IE length as
ies_len = buffer_len - sizeof(*res);
without first checking that buffer_len is at least sizeof(struct
wilc_assoc_resp) (6 bytes). buffer_len is the length reported for a
received association response (host_int_parse_assoc_resp_info() passes
hif_drv->assoc_resp / assoc_resp_info_len straight in) and must be
validated before the driver accesses the fixed header.
For a frame shorter than the 6-byte fixed header, the subtraction wraps.
For a four-byte response the result is truncated to a u16 ies_len of
65534, so kmemdup() then attempts to copy 65534 bytes starting at
buffer + sizeof(*res), beyond the valid association-response data
(CWE-125). A response shorter than four bytes can also cause an
out-of-bounds read of res->status_code at offsets 2 and 3.
Reject frames too short to hold the fixed header before touching the
header or computing ies_len. Also set the connection status to a failure
on this path: the caller falls through to a
"conn_info->status == WLAN_STATUS_SUCCESS" check after the parser
returns, so leaving the status untouched could let a malformed short
response be treated as a successful association. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7615: drop TXRX_NOTIFY on non-mmio buses
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7615_rx_check() and
mt7615_queue_rx_skb() dispatch it to mt7615_mac_tx_free() on every bus.
mt7615_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on the mt7663 USB and SDIO
buses it is NULL, so a TXRX_NOTIFY there calls a NULL pointer in the RX
worker. Same defect as the mt7921 and mt7925 patches in this series.
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488aa9 ("wifi: mt76: connac: do not check WED status for
non-mmio devices"). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: drop TXRX_NOTIFY on non-mmio buses
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7921_rx_check() and
mt7921_queue_rx_skb() dispatch it to mt7921_mac_tx_free() on every bus.
mt7921_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on USB and SDIO it is NULL, so
a TXRX_NOTIFY there calls a NULL pointer in the RX worker:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:0x0
Call Trace:
mt7921_mac_tx_free+0x64/0x310 [mt7921_common]
mt7921_rx_check+0x5f/0xf0 [mt7921_common]
mt76u_rx_worker+0x1b9/0x620 [mt76_usb]
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488aa9 ("wifi: mt76: connac: do not check WED status for
non-mmio devices"). |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: stratix10-svc: fix memory leaks and list corruption bugs
Fix a memory leak when gen_pool_alloc() fails by freeing pmem on the error
path. Switch pmem allocation from devm_kzalloc() to kzalloc() with
explicit kfree() in the free path to match its list-managed lifetime.
Remove the erroneous list_del(&svc_data_mem) which corrupted the list head
on failed lookups. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: comedi_parport: deal with premature interrupt
Syzbot reported a general protection fault in
`comedi_get_is_subdevice_running()`, which was called from the interrupt
handler `parport_interrupt()` in the "comedi_parport" driver, but it
does not currently have a C reproducer for the problem. It's
probably due to a premature interrupt for one of two reasons:
1. The driver sets up the interrupt handler before the comedi subdevices
used by the interrupt handler have been allocated, but does not
disable the interrupt in the parallel port's CTRL register first.
2. The driver uses a user-supplied I/O port base address which Syzbot
would have supplied, but it might not be backed by real parallel port
hardware.
Change the initialization order in the driver's comedi "attach" handler
(`parport_attach()`) so that the hardware registers are initialized
before the interrupt handler is requested. This should prevent
premature interrupts occurring for real hardware.
Also add a test to the interrupt handler to ensure the comedi device is
fully attached and return early if it isn't. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix mmiotrace possible NULL dereferencing of hiter->dev
If the mmio_pipe_open() fails to find a PCI device, the hiter->dev
will be assigned to NULL. The mmiotrace read() function dereferences the
hiter->dev if hiter exists.
Change the test of the read to not only check hiter being NULL, but also
the hiter->dev before dereferencing it. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix resource leak on mmiotrace trace_pipe close
The mmiotrace tracer was added May 12th 2008. At that time, resources
created in pipe_open() could not be freed because there was not
pipe_close function pointer of the tracer. The pipe_close function pointer
was added in December 7th, 2009, but the mmiotrace tracer was not updated.
mmio_pipe_open() allocates a header_iter and takes a pci_dev reference
when trace_pipe is opened. mmio_close() frees them, but it was only
wired to the tracer's .close callback.
tracing_release_pipe() invokes .pipe_close, not .close, when the
trace_pipe file is released. As a result, closing trace_pipe with the
mmiotrace tracer active leaked the header_iter allocation and left a
stale pci_dev reference.
Set .pipe_close to mmio_close, matching how function_graph wires both
callbacks to the same handler.
Note, if the trace_pipe is read to completion, it will clean up the
resources, but if one were to run:
# head -n 1 /sys/kernel/tracing/trace_pipe
VERSION 20070824
Over and over again, it would trigger a massive leak. |
