| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A path traversal vulnerability was found in AWX's project archive extraction. The project_archive action plugin extracts zip and tar archive members by joining the project directory path with the member filename without performing path normalization, boundary validation, or rejecting directory traversal sequences. A malicious archive containing members with path traversal components can write files to arbitrary locations on the execution node's filesystem outside the intended project directory. An attacker who controls the archive content, either through a compromised upstream source, a malicious archive URL, or a man-in-the-middle attack on a plain HTTP connection, can achieve arbitrary file writes as the user performing the extraction, potentially leading to remote code execution through mechanisms such as cron files, SSH authorized keys, or playbook content injection. |
| In the Linux kernel, the following vulnerability has been resolved:
net: thunderbolt: Tear down DMA paths before stopping the rings
tbnet_tear_down() stops both rings and frees their frame buffers before
calling tb_xdomain_disable_paths(). tb_ring_stop() zeroes the ring's
descriptor base and tbnet_free_buffers() unmaps and frees the pages the
frames sit in, so by the time __tb_path_deactivate_hop() polls the hop's
'pending' bit, anything still in flight has nowhere to drain to.
The teardown sequence has been in this order since the driver was added.
The setup path has not: commit ff7cd07f3064 ("net: thunderbolt: Enable
DMA paths only after rings are enabled") moved the path enable to the end
of tbnet_connected_work() and documented why:
/* Both logins successful so enable the rings, high-speed DMA
* paths and start the network device queue.
*
* Note we enable the DMA paths last to make sure we have primed
* the Rx ring before any incoming packets are allowed to
* arrive.
*/
Teardown was never updated to match, so the rings and the paths now come
down in the same order they go up instead of in reverse.
On an ASMedia ASM4242 host router the 'pending' bit then never clears:
every teardown burns the full 500 ms timeout and
__tb_path_deactivate_hop() returns -ETIMEDOUT. Raising the timeout to
5 s does not help, so the hop is not slow to drain, it never drains
at all.
The failure is invisible above the thunderbolt core.
__tb_path_deactivate_hops() is void and only calls tb_port_warn();
tb_path_deactivate(), tb_tunnel_deactivate() and
__tb_disconnect_xdomain_paths() are void as well, and
tb_disconnect_xdomain_paths() ends in an unconditional "return 0". So
tb_xdomain_disable_paths() reports success and the netdev_warn() below
it never fires. Repeated teardowns eventually take the XDomain control
channel down, after which the peer node is gone and only a power cycle
brings the controller back.
Deactivating the paths first fixes it. Measured with kretprobes on a
stock v6.17 tree with no other patches applied, on a link that was up
and had just carried traffic:
before: __tb_path_deactivate_hop() returns 0 for the first hop, then
-ETIMEDOUT for the second 500335 us later
after: 0 for both, 525 us apart
Alternating the two orderings ABBA over three load levels, four
teardowns per arm: every teardown failed before the change (21 of 21
that ran), none failed after (0 of 24). The before arms ran short
because the link died partway through. The same split shows up when
the interface is enslaved to a bond instead of just brought down, which
is how I ran into this in the first place. Throughput and latency after
the change are unchanged.
Hosts whose routers drain the hop despite the stale descriptor base see
no functional difference, since the paths end up deactivated either way. |
| A flaw was found in GLib. A state confusion issue exists in g_dbus_node_info_new_for_xml() in the gio/gdbusintrospection.c file when processing malformed D-Bus introspection XML, specifically with a `node` element nested within other elements like `method`, `signal`, `property` or `arg`. This issue can cause an unsigned integer overflow and lead to an out-of-bounds read, resulting in a denial of service. |
| A flaw was found in gnutls. Servers configured with RSA-PSK (Rivest–Shamir–Adleman – Pre-Shared Key) wrongfully matched usernames containing a NUL character with truncated usernames. A remote attacker could exploit this by sending a specially crafted username, leading to an authentication bypass. This vulnerability allows an attacker to gain unauthorized access by circumventing the authentication process. |
| A flaw was found in gnutls. A remote attacker could exploit an issue in the Datagram Transport Layer Security (DTLS) packet reordering logic. The comparator function, responsible for ordering DTLS packets by sequence numbers, did not correctly handle packets with duplicate sequence numbers. This could lead to unstable packet ordering or undefined behavior, resulting in a denial of service. |
| A heap buffer overflow vulnerability exists in the DTLS handshake fragment reassembly logic of GnuTLS. The issue arises in merge_handshake_packet() where incoming handshake fragments are matched and merged based solely on handshake type, without validating that the message_length field remains consistent across all fragments of the same logical message. An attacker can exploit this by sending crafted DTLS fragments with conflicting message_length values, causing the implementation to allocate a buffer based on a smaller initial fragment and subsequently write beyond its bounds using larger, inconsistent fragments. Because the merge operation does not enforce proper bounds checking against the allocated buffer size, this results in an out-of-bounds write on the heap. The vulnerability is remotely exploitable without authentication via the DTLS handshake path and can lead to application crashes or potential memory corruption. |
| A flaw in GnuTLS DTLS handshake parsing allows malformed fragments with zero length and non-zero offset, leading to an integer underflow during reassembly and resulting in an out-of-bounds read. This issue is remotely exploitable and may cause information disclosure or denial of service. |
| A flaw was found in libcap. A local unprivileged user can exploit a Time-of-check-to-time-of-use (TOCTOU) race condition in the `cap_set_file()` function. This allows an attacker with write access to a parent directory to redirect file capability updates to an attacker-controlled file. By doing so, capabilities can be injected into or stripped from unintended executables, leading to privilege escalation. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix Route Information option length validation
rt6_route_rcv() validates the Route Information option (RFC 4191) length
against the prefix length, but both checks are off by one.
rinfo->length is the ND option length in units of 8 octets and it
*includes* the 8-byte option header, so an option carrying N bytes of
prefix has length == 1 + N/8. RFC 4191 section 2.3 requires length 3
when Prefix Length is greater than 64, and 2 or 3 when it is greater
than 0. The code accepts length >= 2 and length >= 1 respectively.
ipv6_addr_prefix() then copies prefix_len/8 bytes out of rinfo->prefix,
so a Router Advertisement with (prefix_len=128, length=2) or
(prefix_len=64, length=1) makes the kernel read up to 8 bytes past the
end of the option. Those bytes end up in the prefix of the route that
gets installed, so they are visible to userspace:
# RA with a Route Information option (prefix_len=128, length=2)
# followed by a source link-layer address option, 01 01 de ad be ef ca fe
$ ip -6 route show
2001:db8:dead:beef:101:dead:beef:cafe via fe80::1234 dev veth0 proto ra
^^^^^^^^^^^^^^^^^^ the next option, read out of bounds
When the Route Information option is the last one in the packet, those
eight bytes come from the skb tail room instead.
Reject the option lengths RFC 4191 does not allow. |
| In the Linux kernel, the following vulnerability has been resolved:
xdp: reject clones that overrun skb_shared_info tailroom
xdpf_clone() clones broadcast copies into a single page and sets
frame_sz to PAGE_SIZE. __xdp_build_skb_from_frame() later treats that
page like a normal XDP frame and expects the usual skb_shared_info
tailroom at the end of the buffer.
The current check only rejects frames whose linear xdp_frame header,
headroom, and packet data exceed PAGE_SIZE. A source frame backed by a
larger allocation can still satisfy that check while extending into the
clone's required shared-info area. When such a clone is converted back
into an skb, build_skb_around() places skb_shared_info over live packet
bytes and later writes can corrupt XDP return metadata.
Reject clones unless their linear area fits inside
SKB_WITH_OVERHEAD(PAGE_SIZE), matching the tailroom requirement already
enforced by the XDP-to-skb conversion path. |
| The SMS control function of IE-SR-2TX-WL-4G devices can require a password for SMS commands via the 'Enable Password Authorization' setting. The device increments a retry counter on each failed SMS password attempt; after 5 consecutive failed attempts, SMS password authorization is automatically disabled. An unauthenticated remote attacker who is able to send SMS messages to the device can deliberately trigger this by submitting 5 or more invalid passwords, after which subsequent SMS commands are executed without requiring a password, resulting in potential limited configuration tampering, limited information leakage and potentially full loss of availability. |
| A server-side request forgery (SSRF) vulnerability was found in AWX's webhook status callback mechanism. When processing GitHub pull request webhooks, AWX extracts the status callback URL (pull_request.statuses_url) from the incoming webhook payload without validating the target host against the expected Git provider. This URL is persisted in job extra variables and later used to send authenticated status updates. A user with admin role on a webhook-enabled job template can read the template's webhook signing key, forge a signed GitHub webhook payload with an arbitrary statuses_url, and cause AWX to POST status updates to an attacker-controlled or internal URL. The status update request includes the configured Git Personal Access Token (PAT) in the Authorization header, resulting in credential leakage to the attacker-specified endpoint. |
| In containerized-data-importer (CDI), the aggregated cdi.kubevirt.io:view ClusterRole, intended to provide read-only access to CDI resources, includes a rule granting create on the datavolumes/source subresource. CDI's DataVolume clone authorization accepts this permission as sufficient to authorize cloning the contents of any PVC the caller can name, without requiring write access to the source namespace. A user or service account bound to the view role, commonly granted cluster-wide via ClusterRoleBinding, who also has ordinary write access (edit/admin) to any single namespace, can use this to exfiltrate the contents of any PVC in the cluster into a namespace they control, bypassing namespace isolation and the read-only guarantee of the view role. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Use current_context for safe per-CPU buffer swap
The ring_buffer_swap_cpu() function currently checks the per-CPU
committing counter to determine if a buffer is actively being written to
before performing the swap. However, there exists a race window where
this check can be bypassed:
ring_buffer_lock_reserve
cpu_buffer = buffer->buffers[cpu]; // cpu_buffer_a
rb_reserve_next_event
rb_start_commit // inc committing
if (unlikely(READ_ONCE(cpu_buffer->buffer) != buffer)) {...}
__rb_reserve_next
rb_move_tail
rb_end_commit(cpu_buffer); // dec committing => 0
/* interrupt hits here, successfully swaps! */
local_inc(&cpu_buffer->committing);
ring_buffer_unlock_commit
cpu_buffer = buffer->buffers[cpu]; // cpu_buffer_b
rb_commit
rb_end_commit
RB_WARN_ON(cpu_buffer, !local_read(&cpu_buffer->committing))
// triggers warning
The committing counter can temporarily drop to 0 during a single write
operation (within rb_move_tail), creating a window where swap can
succeed even though the write is still in progress. This leads to
inconsistent buffer state and triggers the RB_WARN_ON in rb_commit().
Replace the committing counter check with current_context checks, which
are set at the entry of ring_buffer_lock_reserve() and remain valid
throughout the entire write operation, providing a reliable indicator of
buffer busy state during swap. |
| A flaw was found in glibc. A remote attacker could exploit this vulnerability by providing specially crafted input during SHIFT_JISX0213 to UCS-4 text conversion. This crafted input can cause the application to repeatedly emit a buffered code point without consuming further input, leading to persistent retry churn. This can result in a denial of service (DoS) for callers converting untrusted text. |
| Missing authorization in Checkmk <2.5.0p12, <2.4.0p36, <2.3.0p50 and all 2.2.0 versions allows an authenticated user who knows the ID of a background job to view that job's status and results. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: reject overly deep qdisc hierarchies
Deep qdisc hierarchies can lead to excessive recursion in qdisc tree
walkers and exhaust the kernel stack. The existing loop check does not
cover the create-and-graft path, so a hierarchy can still be extended by
creating a new child qdisc below an already deep parent.
Store the hierarchy depth in struct Qdisc and update it when qdiscs are
grafted. Reject new child qdiscs once the parent is already at the maximum
allowed depth. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix netns reference imbalance in conntrack kfuncs
The opts argument of the BPF conntrack kfuncs can point to a shared
map value. __bpf_nf_ct_lookup() and __bpf_nf_ct_alloc_entry() read
opts->netns_id separately when acquiring and releasing the network
namespace reference.
The reference imbalance can occur as follows:
CPU 0 CPU 1
read opts->netns_id (-1)
skip get_net_ns_by_id()
write opts->netns_id (id)
read opts->netns_id (id)
put_net(net) /* no matching get */
The reverse transition leaks the reference. Repeating the unmatched put
can destroy a live namespace and crash later users.
The kernel reported:
Oops: general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef]
RIP: 0010:bpf_prog_test_run_xdp+0x52c/0x1700
Call Trace:
__sys_bpf+0x1662/0x50c0
__x64_sys_bpf+0x73/0xb0
do_syscall_64+0xf9/0x540
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Kernel panic - not syncing: Fatal exception
Snapshot every input field of opts with READ_ONCE() before validating or
using it. The netns_id snapshot keeps the namespace get/put pair
balanced, while the other snapshots keep the remaining options from
changing partway through an invocation. The individual reads can still
observe an inconsistent combination during a concurrent update, but each
selected field value remains stable for that invocation. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: skip rehash for peers already removed from by_id
ovpn_nl_peer_set_doit() resolves the target peer via
ovpn_peer_get_by_id() before taking ovpn->lock. In the window between
the lookup (which only takes a refcount) and the subsequent
spin_lock_bh(&ovpn->lock), a concurrent OVPN_CMD_PEER_DEL, keepalive
expiry, or socket teardown can take ovpn->lock first, run
ovpn_peer_remove() to unhash the peer from all four tables (by_id,
by_vpn_addr4/6, by_transp_addr) and release the lock. set_doit then
acquires ovpn->lock and calls ovpn_peer_hash_vpn_ip(), which
re-inserts the now-removed peer back into the rehashing tables.
The same race affects the float path: ovpn_peer_endpoints_update()
holds only a refcount and acquires ovpn->lock very late (after async
AEAD decrypt and a netlink notification), then rehashes the peer
in the by_transp_addr table.
The resurrected peer becomes reachable again from the RX lookup
(ovpn_peer_get_by_transp_addr) and the TX VPN-IP lookup, even though
userspace believes it is gone. Once the data-path refcount drops the
peer is freed via call_rcu while the hash entries embedded in it
remain linked, opening a UAF window.
Bail out of the rehash when hash_entry_id is unhashed, mirroring
the sentinel already used by ovpn_peer_remove() to detect the
already-removed state. The check is safe under ovpn->lock, which
serializes every mutation of hash_entry_id, and is a no-op for the
add path because ovpn_peer_add_mp() inserts hash_entry_id before
calling ovpn_peer_hash_vpn_ip(). |
| A flaw was found in file-roller. When opening or extracting a malicious 7z or RAR archive containing a file entry with an excessively long path, file-roller's progress-line parsing copies the path into a fixed-size stack buffer using an unbounded string copy. This can trigger a stack buffer overflow and cause file-roller to terminate, resulting in a denial of service. To exploit this flaw, a victim must open or extract the crafted archive using file-roller. |
