| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ct: fix nf_connlabels leak on two error paths
tcf_ct_fill_params() calls nf_connlabels_get() (setting put_labels) when
TCA_CT_LABELS is present, but two later error sites use a bare return
instead of "goto err", skipping the err: nf_connlabels_put() cleanup.
They also precede the "p->put_labels = put_labels" assignment, so the
tcf_ct_params_free() fallback does not release the count either. Each
failed RTM_NEWACTION on these paths leaks one nf_connlabels reference:
net->ct.labels_used is incremented and never released. The action is
reachable with CAP_NET_ADMIN over the netns, i.e. from an unprivileged
user namespace on default-userns kernels.
Impact: an unprivileged user with CAP_NET_ADMIN over a network namespace
(e.g. via user namespaces) leaks one nf_connlabels reference per failed
RTM_NEWACTION on the two error paths; net->ct.labels_used is never
released.
The err: label is safe to reach from both sites: p->tmpl is still NULL
there (kzalloc'd, not yet assigned) and nf_ct_put(NULL) is a no-op, so
no inline release is needed. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/bpf-ops: reject re-registration of an already-bound ops
io_install_bpf() only rejects a second registration on the ctx side
(ctx->bpf_ops) and sets the per-map back-pointer ops->priv
unconditionally. The struct_ops link path never advances a map past
BPF_STRUCT_OPS_STATE_READY, so the same io_uring_bpf_ops map can be
registered more than once, and bpf_io_reg() re-resolves the target ring
via fget(ops->ring_fd) on every call. A caller can therefore point the
same ring_fd at a different io_ring_ctx between two BPF_LINK_CREATE
calls.
The second registration passes the ctx->bpf_ops check (the new ctx has
none) and overwrites ops->priv, orphaning the first ctx. Teardown
(io_eject_bpf()/bpf_io_unreg()) only reaches a ctx through ops->priv, so
the orphaned ctx is never torn down: its ctx->loop_step keeps pointing
into the struct_ops trampoline, which is freed once the map is gone. A
later io_uring_enter() on the orphaned ring then calls the dangling
ctx->loop_step from io_run_loop() -- a use-after-free of freed
executable memory, reachable by a task with CAP_BPF + CAP_PERFMON.
Reject registration when ops->priv is already set, as hid_bpf_reg()
does for its struct_ops. |
| In the Linux kernel, the following vulnerability has been resolved:
netdev-genl: report NAPI thread PID in the caller's pid namespace
netdev_nl_napi_fill_one() reports the NAPI kthread PID in NETDEV_A_NAPI_PID
using task_pid_nr(), which returns the PID in the initial pid namespace.
NETDEV_CMD_NAPI_GET does not have GENL_ADMIN_PERM and the netdev genl family
is netnsok, so a caller in a child pid namespace can issue it. That caller
then sees the kthread's global PID, even though the kthread is not visible
in its pid namespace, where the value should be 0.
Translate the PID through the caller's pid namespace, the same way commit
3799c2570982 ("io_uring/fdinfo: translate SqThread PID through caller's
pid_ns") did for the io_uring SQPOLL thread. The doit and dumpit paths both
run synchronously in the caller's context, so task_active_pid_ns(current) is
the caller's pid namespace. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix refcount leak in nvmet_sq_create()
In nvmet_sq_create(), a reference on the ctrl is taken
via kref_get_unless_zero() before calling nvmet_check_sqid().
If nvmet_check_sqid() fails, the function returns the error
directly without releasing the reference, leading to a leak.
Fix this by jumping to the "ctrl_put" label, which already
performs the necessary nvmet_ctrl_put(ctrl). This ensures the
reference is properly released on this error path. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: fix stack info leak in RME Digiface status
snd_rme_digiface_read_status() reads a four-word status block from the
device into an uninitialised on-stack __le32 buf[4] and, whenever the
vendor control-IN transfer does not return a negative error, copies all
four words into the caller's status[].
snd_usb_ctl_msg() copies the full requested size back into the caller's
buffer regardless of how many bytes the data stage actually delivered:
buf = kmemdup(data, size, GFP_KERNEL);
err = usb_control_msg(dev, pipe, request, requesttype,
value, index, buf, size, timeout);
memcpy(data, buf, size);
usb_control_msg() returns the transferred length on a short control-IN,
which is a non-negative value, and writes only that many bytes. The
remainder of the copy back is the kmemdup()ed image of the caller's
buffer, so a device answering with a short data stage leaves the
trailing words of buf[] holding leftover kernel stack. The only guard
in the caller is err < 0, so those words are stored into status[].
They then reach user space: snd_rme_digiface_get_status_val() selects a
16-bit halfword of status[] per the control's reg/mask, and the eight
Digiface status controls together expose the whole 16-byte frame to an
unprivileged reader of /dev/snd/controlC*.
Zero-initialise the buffer so a short read yields zeros instead of stack
residue. This mirrors snd_rme_get_status1(), which already clears its
output word before the same kind of vendor read.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: mchp23k256: use SPI match data for chip caps
The driver stores chip capacity information in both the OF match table
and the SPI id table. Probe currently uses of_device_get_match_data(),
so a non-OF SPI modalias match falls back to mchp23k256_caps even when
the SPI id table selected a different part.
Use spi_get_device_match_data() so SPI id-table driver_data is consumed
when OF match data is absent. This keeps the existing default fallback
while avoiding the wrong MTD geometry for id-table-only matches. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/spufs: fix out-of-bounds access in spufs_mem_mmap_access()
spufs_mem_mmap_access() computes the local store offset as
address - vma->vm_start, but bounds-checks it against vma->vm_end
instead of the local store size. On 64-bit, offset is always well
below vma->vm_end, so the clamp never fires and len stays unbounded
against the LS_SIZE buffer returned by ctx->ops->get_ls().
Reject offsets at or beyond LS_SIZE and clamp len to the remaining
space, mirroring the guard already used by spufs_mem_mmap_fault() and
spufs_ps_fault(). |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/user_events: Fix use-after-free in user_event_mm_dup()
user_event_mm_dup() walks the parent mm's enabler list locklessly under
rcu_read_lock() during fork() (from copy_process()); it does not take
event_mutex:
rcu_read_lock();
list_for_each_entry_rcu(enabler, &old_mm->enablers, mm_enablers_link)
enabler->event = user_event_get(orig->event);
user_event_enabler_destroy() removes an enabler from that list with
list_del_rcu() and then, without waiting for a grace period, drops the
enabler's user_event reference with user_event_put() and frees the enabler
with kfree(). A reader that loaded the enabler before the list_del_rcu()
can still be walking it, which leads to two use-after-frees:
- kfree(enabler) frees the enabler while that reader dereferences
enabler->event.
- user_event_put() may drop the last reference to the user_event, which
is then freed (via delayed_destroy_user_event() on a work queue), while
the same reader does user_event_get(orig->event) on it.
Both are reachable by an unprivileged task that can open user_events_data:
one multithreaded process that registers an enabler and then concurrently
unregisters it and calls fork() triggers the race. KASAN reports a
slab-use-after-free in user_event_mm_dup() during clone(), with a
"refcount_t: addition on 0" warning when the user_event is freed.
The enabler use-after-free was found first; the user_event one was reported
by XIAO WU, and the earlier enabler-only fix did not address it.
Defer both the user_event_put() and the kfree(enabler) to a work item
queued with queue_rcu_work(), so they run only after an RCU grace period,
once all readers walking the enabler list have finished. The put must run
in process context because user_event_put() takes event_mutex on the last
reference, so a work queue is used rather than call_rcu(). The now-unlocked
put lets the locked argument of user_event_enabler_destroy() be removed;
all callers are updated. |
| IBM Storage Scale 5.2.3.0 through 5.2.3.8, and 6.0.0.0 through 6.0.1.0 GUI contains a hardcoded token in the source code, which was used for inter-node cluster communication and REST API authentication between GUI. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Use caller client for debug BO sync
amdxdna_drm_sync_bo_ioctl() looks up args->handle in the ioctl caller's
drm_file. For SYNC_DIRECT_FROM_DEVICE, it then calls
amdxdna_hwctx_sync_debug_bo(), but passes abo->client.
amdxdna_hwctx_sync_debug_bo() uses the passed client both as the handle
namespace for debug_bo_hdl and as the owner of the hardware context xarray.
Those must match the file that supplied args->handle. The BO's stored
client pointer is object state, not the ioctl context.
Pass filp->driver_priv instead, matching the original handle lookup. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/monwriter: Reject buffer reuse with different data length
When data buffers are reused, e.g. for interval sample records, the
first record determines the data length, and the size of the buffer for
user copy. Current monwriter code does not check if the data length was
changed for subsequent records, which also would never happen for valid
user programs.
However, a malicious user could change the data length, resulting in out
of bounds user copy to the kernel buffer, and memory corruption. By
default, the monwriter misc device is created with root-only permissions,
so practical impact is typically low.
Fix this by checking for changed data length and rejecting such records. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: tpm2-sessions: wait for async KPP completion in tpm_buf_append_salt
tpm_buf_append_salt() in drivers/char/tpm/tpm2-sessions.c calls
crypto_kpp_generate_public_key() and crypto_kpp_compute_shared_secret()
without installing a completion callback, discards both return values,
and immediately frees the kpp_request via kpp_request_free(). When the
resolved ecdh-nist-p256 KPP backend is asynchronous (atmel-ecc, HPRE,
keembay-ocs), either operation returns -EINPROGRESS and the deferred
completion worker dereferences the freed request.
The path fires automatically from the hwrng_fillfn kernel thread via
tpm_get_random -> tpm2_get_random -> tpm2_start_auth_session ->
tpm_buf_append_salt on every entropy poll, without any userland action.
Install crypto_req_done as the completion callback, wrap both KPP
operations in crypto_wait_req(), and propagate errors to the caller.
The wait is a no-op for synchronous backends. |
| In the Linux kernel, the following vulnerability has been resolved:
binder: cache secctx size before release zeroes it
binder_transaction() bounds the scatter-gather buffer area with
sg_buf_end_offset and subtracts the aligned LSM context size because
the secctx is written at the tail of that area. The subtraction reads
lsmctx.len, but that field has already been cleared by the time the
line runs:
security_secid_to_secctx(secid, &lsmctx) /* lsmctx.len set */
lsmctx_aligned_size = ALIGN(lsmctx.len, sizeof(u64))
extra_buffers_size += lsmctx_aligned_size
...
security_release_secctx(&lsmctx) /* memset zeroes len */
...
sg_buf_end_offset = sg_buf_offset + extra_buffers_size
- ALIGN(lsmctx.len, sizeof(u64)) /* ALIGN(0,8) */
security_release_secctx() does memset(cp, 0, sizeof(*cp)), so lsmctx.len
reads back as 0 and the subtraction contributes nothing, leaving
sg_buf_end_offset too large by the aligned secctx size on every
transaction to a txn_security_ctx node.
Each BINDER_TYPE_PTR object then derives buf_left = sg_buf_end_offset -
sg_buf_offset as the sole upper bound on its copy, so the inflated end
offset lets the copy run into the bytes that already hold the secctx.
The aligned size must therefore be cached before release rather than
re-read from the now-cleared field. Fix by caching it in
lsmctx_aligned_size at function scope when it is first computed and
subtracting lsmctx_aligned_size instead of re-reading lsmctx.len after
release. Reuse the same value for the earlier buf_offset computation. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: close durable scavenger races against m_fp_list lookups
ksmbd_durable_scavenger() has two related races against any walker
that iterates f_ci->m_fp_list, including ksmbd_lookup_fd_inode()
(used by ksmbd_vfs_rename) and the share-mode checks in
fs/smb/server/smb_common.c.
(1) fp->node list-head reuse. Durable-preserved handles can remain
linked on f_ci->m_fp_list after session teardown so share-mode checks
still see them while the handle is reconnectable. The scavenger
collected expired handles by adding fp->node to a local
scavenger_list after removing them from the global durable idr.
Because fp->node is the same list_head used by m_fp_list,
list_add(&fp->node, &scavenger_list) overwrites the m_fp_list links
and corrupts both lists. CONFIG_DEBUG_LIST can report this on the
share-mode walk path.
(2) Refcount race against m_fp_list walkers. The scavenger qualifies
an expired durable handle with atomic_read(&fp->refcount) > 1 and
fp->conn under global_ft.lock, removes fp from global_ft, then drops
global_ft.lock before unlinking fp from m_fp_list and freeing it.
During that gap fp is still linked on m_fp_list with f_state ==
FP_INITED. ksmbd_lookup_fd_inode() under m_lock read calls
ksmbd_fp_get() (atomic_inc_not_zero on refcount that is still 1) and
takes a live reference; the scavenger then unlinks and frees fp
while the holder owns a reference, leading to UAF on the holder's
subsequent ksmbd_fd_put() and on any field reads performed by a
concurrent share-mode walker that iterates m_fp_list without taking
ksmbd_fp_get() (smb_check_perm_dleases-like paths).
Fix both:
* Stop reusing fp->node as a scavenger-private list node. Remove
one expired handle from global_ft under global_ft.lock, take an
explicit transient reference, drop the lock, unlink fp->node
from m_fp_list under f_ci->m_lock, then drop both the durable
lifetime and transient references with atomic_sub_and_test(2,
&fp->refcount). If the scavenger is the last putter the close
runs there; otherwise an in-flight holder that already raced
through the m_fp_list lookup owns the final close via its
ksmbd_fd_put() path. The one-at-a-time disposal can rescan the
durable idr when multiple handles expire in the same pass, but
durable scavenging is a background expiration path and the final
full scan recomputes min_timeout before the next wait.
* Clear fp->persistent_id inside __ksmbd_remove_durable_fd() right
after idr_remove(), so a delayed final close from a holder that
snatched fp does not re-issue idr_remove() on a persistent id
that idr_alloc_cyclic() in ksmbd_open_durable_fd() may have
already handed out to a brand-new durable handle.
* Bypass the per-conn open_files_count decrement in
__put_fd_final() when fp is detached from any session table
(fp->conn cleared by session_fd_check() at durable preserve --
paired with the volatile_id clear at unpublish, so checking
fp->conn alone is sufficient). The walker that owns the final
close runs from an unrelated work->conn whose
stats.open_files_count never tracked this durable fp; without
this guard the holder would underflow that unrelated counter.
The two races are folded into one patch because patch (1) alone
cleans up the corrupted list but leaves a deterministic UAF window
for m_fp_list walkers that the transient-reference and
persistent_id discipline in (2) close; bisecting onto an
intermediate state would land on a UAF that pre-patch chaos merely
made less reproducible.
Validation:
* CONFIG_DEBUG_LIST coverage for the list_head reuse path.
* KASAN-enabled direct SMB2 durable-handle coverage that exercised
ksmbd_durable_scavenger() and non-NULL ksmbd_lookup_fd_inode()
returns while durable handles expired under concurrent rename
lookups, with no KASAN, UAF, list-corruption, ODEBUG, or WARNING
reports.
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: uniwill-laptop: Do not enable the charging limit even when forced
It seems that on some older models (~2020) the battery charging limit
can permanently damage the battery. Prevent users from enabling this
feature thru the "force" module parameter to avoid causing permanent
hardware damage on such devices. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wilc1000: fix dma_buffer leak on bus acquire failure
wilc_wlan_firmware_download() allocates dma_buffer with kmalloc() at
the top of the function and uses a 'fail:' label to free it via
kfree(dma_buffer) on error.
All later error paths correctly use 'goto fail' to route through this
cleanup. However, the early failure path after the first acquire_bus()
call uses a bare 'return ret;', which leaks dma_buffer whenever the bus
acquire fails.
Replace the early return with goto fail so the existing cleanup path
runs.
Found via a custom Coccinelle semantic patch hunting for kmalloc'd
locals leaked on early-return error paths in driver firmware-download
code. |
| In the Linux kernel, the following vulnerability has been resolved:
pds_core: fix debugfs_lookup dentry leak and error handling
debugfs_lookup() returns a dentry with an elevated reference count that
must be released with dput(). The current code discards the returned
dentry without calling dput(), causing a reference leak on every
firmware reset recovery.
Additionally, when CONFIG_DEBUG_FS is disabled, debugfs_lookup()
returns ERR_PTR(-ENODEV), not NULL. The current check passes for error
pointers and would call dput() on an invalid pointer, causing a crash. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix use-after-free in amdxdna_gem_dmabuf_mmap()
When vm_insert_pages() fails, the error path calls vma->vm_ops->close(vma)
which internally calls drm_gem_vm_close() → drm_gem_object_put(),
releasing the GEM object reference acquired at the start of the function.
However, the close_vma label then falls through to put_obj, which calls
drm_gem_object_put() a second time on the same object.
If the first put releases the last reference, the object is freed and the
second put accesses freed memory, causing a use-after-free.
Fix by returning directly from close_vma instead of falling through to
put_obj, since the close handler already performs all necessary cleanup
including the object put. |
| In affected versions of Octopus Deploy Insufficient checks on the project trigger actions allows an unauthorized user to trigger a deployment. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Inject SEA if guest VNCR isn't normal memory
When constructing an L1 VNCR mapping, KVM unconditionally uses cacheable
memory attributes, even if the underlying PFN isn't memory. This gets
particularly hairy if the endpoint doesn't support cacheable memory
attributes, potentially throwing an SError on writeback...
While KVM does permit cacheable memory attributes on certain PFNMAP
VMAs, kvm_translate_vncr() isn't currently grabbing the VMA. So do the
simpler thing for now and just reject everything that isn't memory. |
