| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/display: fix oops in suspend/shutdown without display
The xe driver keeps track of whether to probe display, and whether
display hardware is there, using xe->info.probe_display. It gets set to
false if there's no display after intel_display_device_probe(). However,
the display may also be disabled via fuses, detected at a later time in
intel_display_device_info_runtime_init().
In this case, the xe driver does for_each_intel_crtc() on uninitialized
mode config in xe_display_flush_cleanup_work(), leading to a NULL
pointer dereference, and generally calls display code with display info
cleared.
Check for intel_display_device_present() after
intel_display_device_info_runtime_init(), and reset
xe->info.probe_display as necessary. Also do unset_display_features()
for completeness, although display runtime init has already done
that. This will need to be unified across all cases later.
Move intel_display_device_info_runtime_init() call slightly earlier,
similar to i915, to avoid a bunch of unnecessary setup for no display
cases.
Note #1: The xe driver has no business doing low level display plumbing
like for_each_intel_crtc() to begin with. It all needs to happen in
display code.
Note #2: The actual bug is present already in commit 44e694958b95
("drm/xe/display: Implement display support"), but the oops was likely
introduced later at commit ddf6492e0e50 ("drm/xe/display: Make display
suspend/resume work on discrete").
(cherry picked from commit 7c3eb9f47533220888a67266448185fd0775d4da) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: fix potential deadlock in mt7921_roc_abort_sync
roc_abort_sync() can deadlock with roc_work(). roc_work() holds
dev->mt76.mutex, while cancel_work_sync() waits for roc_work()
to finish. If the caller already owns the same mutex, both
sides block and no progress is possible.
This deadlock can occur during station removal when
mt76_sta_state() -> mt76_sta_remove() -> mt7921_mac_sta_remove() ->
mt7921_roc_abort_sync() invokes cancel_work_sync() while
roc_work() is still running and holding dev->mt76.mutex.
This avoids the mutex deadlock and preserves exactly-once
work ownership. |
| Unauthenticated SQL Injection in GeekyBot <= 1.2.5 versions. |
| The Kirki – Freeform Page Builder, Website Builder & Customizer plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 6.0.11 via the get_single_symbol. This makes it possible for unauthenticated attackers to extract the full builder metadata and rendered HTML of any kirki_symbol post — including unpublished drafts — by supplying a sequential WordPress post ID. |
| The reported behavior does not constitute a privilege escalation. Exploitation requires the attacker to already possess the manage-realm administrative role within the realm-management client. By design, the manage-realm role is intended to be equivalent in administrative authority to realm-admin. A user with manage-realm already has full administrative control over the realm. Therefore, importing users with realm-admin role mappings through POST /admin/realms/{realm}/partialImport does not grant any additional privileges beyond those already held by the administrator and does not represent a security vulnerability. |
| containerd is an open-source container runtime. Versions prior to 2.3.2, 2.2.5 and 2.1.9 contain a vulnerability in the CRI checkpoint import process where it fails to validate the image references specified within a checkpoint image's configuration. An attacker with permissions to create pods can use a crafted checkpoint image to force containerd to pull a malicious image and assign it an arbitrary local tag, thereby poisoning the node's local image cache. Subsequently, if other pods on the same node attempt to use the poisoned tag with an IfNotPresent (or Never) pull policy, they will unknowingly execute the attacker's malicious image instead of the legitimate one. This can lead to a compromise of the affected pods, allowing the attacker to execute arbitrary code under the victim pod's identity. This issue has been fixed in versions 2.3.2, 2.2.5 and 2.1.9. |
| The Houzez Property Feed plugin for WordPress is vulnerable to SQL Injection via the 'orderby' parameter in all versions up to, and including, 2.5.46 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query in the prepare_items() method of the Houzez_Property_Feed_Admin_Logs_Export_Table (and Houzez_Property_Feed_Admin_Logs_Import_Table) class. The user-controlled $_GET['orderby'] and $_GET['order'] values are filtered only with sanitize_text_field() and then concatenated into the SQL format string before $wpdb->prepare() is called — prepare() only parameterizes the appended LIMIT/OFFSET clause and cannot retroactively secure the already-tainted ORDER BY clause. This makes it possible for authenticated attackers, with Administrator-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| Contributor SQL Injection in WP EasyCart <= 5.9.0 versions. |
| Contributor SQL Injection in iNET Webkit 1.2.4 versions. |
| Subscriber Broken Access Control in Booked <= 3.0.0 versions. |
| Contributor SQL Injection in Custom Field Template <= 2.7.8 versions. |
| containerd is an open-source container runtime. In Versions prior to 2.3.2, 2.2.5 and 2.1.9, the CRI implementation improperly trusts Container Device Interface (CDI) annotations found within untrusted checkpoint image metadata during container restoration. When restoring a container from a checkpoint, containerd preserves CDI-related annotations from the checkpoint archive rather than relying solely on the pod's create-time specification. This allows a user with pod creation permissions to bypass standard Kubernetes resource allocation and device plugin enforcement, injecting arbitrary CDI edits (such as device nodes and host mounts) into the restored container. Successful exploitation requires that the node has CDI enabled and contains a matching host CDI specification for the requested device; environments where CDI is disabled or lacking sensitive device specifications are not affected. This issue has been fixed in versions 2.3.2, 2.2.5 and 2.1.9. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmem: layouts: onie-tlv: fix hang on unknown types
The EEPROM on my board has a vendor specific entry of type 0x41. When
stumbling upon that, this driver hangs in an endless loop.
Fix it by keep incrementing the offset on unknown entries, so the loop
will eventually stop. |
| In Progress Flowmon ADS versions prior to 12.5.6 and 13.0.5, a vulnerability exists whereby an adversary who is authenticated as a low-privileged user in the Anomaly Detection System (ADS) may send specially crafted requests that could result in unauthorized access to application data and its modification. |
| An incorrect authorization vulnerability was identified in GitHub Enterprise Server that allowed a user-to-server token scoped to a GitHub App installation to perform certain write operations on public repositories outside the token's intended scope. This was possible because the authorization check only verified that the installation had read permissions on the target repository rather than verifying that the token's installation was explicitly granted access to that repository. An attacker who obtained a victim's user-to-server token could create issues, issue comments, commit comments, and private vulnerability reports on any public repository, appearing as the victim user with no indication of the app involvement. This vulnerability was fixed by adding a repository scope check for user-to-server tokens issued by global apps. This vulnerability affected all versions of GitHub Enterprise Server prior to 3.22 and was fixed in versions 3.21.2, 3.20.4, 3.19.8, 3.18.11, 3.17.17, 3.16.20. This vulnerability was reported via the GitHub Bug Bounty program. |
| The Envo's Templates & Widgets for Elementor and WooCommerce plugin for WordPress is vulnerable to unauthorized access of data due to a missing authorization check on the Envo Tabs (and Off Canvas) widget's template rendering in versions up to, and including, 1.4.26. The render() method of the Tabs widget passes a user-controlled template/post ID directly to Elementor's get_builder_content_for_display() without verifying the referenced post's status (published/private/draft) or the visitor's authorization to view it. This makes it possible for authenticated attackers, with Author-level access and above, to disclose the contents of private Elementor-driven pages and templates to anonymous visitors by configuring an Envo Tabs widget on a public post to reference the private content's ID (which can be supplied by editing the underlying Elementor widget JSON via the Elementor editor REST API). |
| Subscriber Broken Access Control in Advanced Contact form 7 DB <= 2.0.9 versions. |
| API Platform Core is a system to create hypermedia-driven REST and GraphQL APIs. In versions prior to 4.1.30, 4.2.26 and 4.3.12, the serializer's AbstractItemNormalizer does not validate the resource type returned when resolving relation IRIs, allowing type confusion where a resource of an unintended type can be silently assigned to a relation property. An attacker who can submit write requests (POST/PUT/PATCH) to an API Platform endpoint with writable relations can supply a relation IRI pointing to a resource of a different type than the relation's declared class. Because getResourceFromIri() does not pass an $operation to IriConverter::getResourceFromIri(), the is_a type guard at IriConverter.php:86 is skipped. For untyped relation properties (legacy @var-only style), the wrong-typed object is silently assigned, corrupting invariants and potentially feeding downstream logic that assumes the declared type (CWE-843). For typed properties (modern PHP 8.x), the substitution is blocked by Symfony's PropertyAccessor with an InvalidTypeException. This issue has been fixed in versions 4.1.30, 4.2.26 and 4.3.12. |
| Subscriber SQL Injection in Unicamp <= 2.2.2 versions. |
| In Progress Flowmon versions prior to 12.5.9 and 13.0.11, a vulnerability exists whereby an authenticated low-privileged user may craft a request during the PDF generation process that results in operations being performed with the privileges of another user, potentially leading to unauthorized access to sensitive data and unintended modifications to system configuration. |
