| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| @fastify/http-proxy is a Fastify plugin that proxies HTTP requests to an upstream server under a configured prefix. In versions 11.6.0 through 11.6.2, the destination validation normalizes literal backslashes before it percent-decodes the request path, so a path that encodes its backslashes and dot-segments survives the dot-segment check and is only turned into backslash and double-dot sequences after that check has passed. When the upstream resolves on a platform that treats a backslash as a path separator, the forwarded request walks out of the configured proxy prefix and reaches a sibling location on the upstream. An unauthenticated remote attacker can use this to retrieve upstream resources outside the intended prefix, so the impact is confidentiality only, and exploitation depends on the upstream's path handling. The issue is fixed in @fastify/http-proxy 11.6.3, and users should upgrade to 11.6.3 or later. This is a follow-up to the earlier prefix-escape fix, which did not account for the encoded-backslash form. |
| @fastify/http-proxy is a Fastify plugin that proxies HTTP requests to an upstream server under a configured prefix. In versions 9.0.0 through 11.6.5, when an application uses parameterized prefix and rewritePrefix options to pin clients to a fixed upstream path, the plugin substitutes URL-decoded route parameters into rewritePrefix without re-encoding them. A parameter value that encodes a path separator together with a fragment or query delimiter therefore decodes into real separators and delimiters that inject extra upstream path segments and strip the mandatory suffix the rewritePrefix was meant to enforce, without using any dot-dot traversal. An unauthenticated remote attacker can use this to reach upstream locations outside the intended prefix, leading to path-restriction bypass and, depending on the upstream, server-side request forgery or authorization bypass in the proxied service. The issue is fixed in @fastify/http-proxy 11.6.6, and users should upgrade to 11.6.6 or later. There is no workaround other than upgrading. |
| GNU mtools before 4.0.50 has an out-of-bounds write in parse_vses in vfat.c. |
| In Eclipse ThreadX versions 6.0.1 through 6.5.2.202603, the Module Manager loaders return an overflow error without releasing the Module Manager mutex when a module preamble declares a data or stack size that overflows the allocation arithmetic. Loading such an image blocks every later module load, start, stop and unload from other threads until the system is reset. |
| @fastify/secure-session is a session plugin for Fastify that stores an encrypted session in a cookie. In versions 7.5.0 through 8.4.1, when the plugin is configured with the signed cookie option, it calls the cookie unsign routine but, when the signature check reports the value as invalid, still passes the original cookie value to the session decoder, so a session whose signature did not validate is decrypted anyway. The practical effect appears when an application supplies the cookie signing secret independently of the session encryption key and rotates only the signing secret to retire existing sessions while keeping the encryption key active, because a holder of an old session cookie can strip the now obsolete signature and keep using the session. The attacker must already possess an unexpired encrypted session cookie and needs neither secret, and cannot forge session data, extend expiry, or survive rotation of the encryption key. The issue is fixed in @fastify/secure-session 8.4.2, which no longer decodes the session when the signed cookie option is set and the signature check fails, and users should upgrade to 8.4.2 or later. As a workaround, rotate the session encryption key rather than relying on rotation of the cookie signing secret alone. |
| @fastify/multipart is the multipart form-data and file upload plugin for the Fastify web framework. In versions 5.3.0 through 10.1.6, the plugin does not propagate a parser error to the file stream when a request body ends inside a file part with no closing boundary, even though the Content-Length is complete, the client does not abort, and no file size limit is exceeded. The plugin destroys the in-progress file stream without an error, so a handler that iterates the request parts and performs asynchronous work before consuming the file attaches to a stream that never emits an error or end event, and the request never responds while the connection stays open. An unauthenticated remote client can repeat these malformed uploads against such a route to accumulate pending connections and exhaust server resources, so the impact is availability only and exploitation depends on the application using a delayed file consumer. The issue is fixed in @fastify/multipart 10.1.7, where the parser error is propagated to the file stream so a delayed consumer settles with an error instead of hanging, and users should upgrade to 10.1.7 or later. There is no workaround other than upgrading. |
| @fastify/reply-from is a Fastify plugin that forwards requests to an upstream HTTP server. In versions up to and including 12.8.0, the plugin validated proxy paths against forward-slash dot-segments only and then built the target with the WHATWG URL parser, which normalizes a backslash and its percent-encoded form to a forward slash on the http, https, ws, and wss schemes. A path that uses backslash dot-segments therefore bypasses the traversal check and resolves to a different upstream path, so an application that scopes proxying to an upstream prefix, or relies on route guards in front of the forwarding call, can have an unauthenticated request escape the intended prefix and reach other upstream endpoints. The resulting access to unintended upstream resources is primarily a confidentiality impact with limited integrity impact. The issue is fixed in @fastify/reply-from 12.8.1, where the path is normalized and any segment resolving to a single or double dot, along with control characters and ambiguous whitespace, is rejected before the URL is constructed, and users should upgrade to 12.8.1 or later. There is no workaround other than upgrading. |
| A flaw has been found in icret EasyImage up to 2.8.7. The impacted element is an unknown function of the file app/del.php. Executing a manipulation of the argument hash can lead to improper privilege management. The attack can be launched remotely. The exploit has been published and may be used. This patch is called b12cb67d447bcbb67e21c8f011d0f5638229760c. A patch should be applied to remediate this issue. |
| A security flaw has been discovered in NocoDB up to 2026.07.0. Impacted is the function AuthService.validateUser of the component Sign-in Endpoint. Performing a manipulation of the argument salt results in information disclosure. It is possible to initiate the attack remotely. The attack's complexity is rated as high. The exploitability is considered difficult. The vendor deleted the GitHub issue for this vulnerability without any explanation. Afterwards the vendor was contacted early about this disclosure via email but did not respond in any way. |
| A vulnerability was detected in Yoosee GM8135S Camera 21.00.01.36. Affected is an unknown function of the component Secure Boot. Performing a manipulation results in improper verification of cryptographic signature. The attack needs to be approached locally. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security flaw has been discovered in GouGuOA up to 6.1.2. The impacted element is the function chunkUpload of the file app/disk/controller/Api.php. The manipulation of the argument file_extension results in unrestricted upload. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in GiantappMan LiveWallPaper 2.6.8.0 on Windows. This issue affects some unknown processing of the file /LiveWallpaper/UploadFile of the component SignalR Hub. Performing a manipulation results in missing authentication. The attack is possible to be carried out remotely. The exploit has been made public and could be used. The patch is named b62f878899adbfc2968e3345442f3a3df91b774d. It is suggested to install a patch to address this issue. The vendor was contacted early about this disclosure. |
| A vulnerability was detected in Datafeedr Product Sets Plugin up to 1.3.24 on WordPress. Affected by this issue is the function dfrps_ajax_delete_saved_search of the file functions/ajax.php of the component AJAX Handlers. The manipulation results in missing authorization. The attack may be launched remotely. The exploit is now public and may be used. Upgrading to version 1.3.25 can resolve this issue. Upgrading the affected component is advised. The vendor was contacted early about this disclosure. |
| A security flaw has been discovered in Sony Neural Network Libraries up to 1.39.0. This impacts the function func_set_nnabla_version_decorate of the file python/src/nnabla/utils/converter/utils.py of the component NNP Converter. Performing a manipulation of the argument function.type results in code injection. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer. |
| A vulnerability was found in itsourcecode Online Cake Ordering System 1.0. The affected element is an unknown function of the file /deletetransac.php. The manipulation of the argument ID results in sql injection. The attack may be performed from remote. The exploit has been made public and could be used. |
| ConnMan through 2.0 has a stack-based buffer overflow via a DHCPv6 Reply message. This occurs in get_domains in gdhcp/client.c. It copies a fixed NS_MAXDNAME (1025) bytes from a DHCPv6 DOMAIN_LIST (option 24) value into a 1026-byte stack buffer dns_name regardless of the actual option length, then walks DNS labels with an unbounded "c += jump + 1" loop. A crafted DHCPv6 REPLY with a DOMAIN_LIST option of >= 1025 non-zero bytes makes the label walk leave the buffer and read/write '.' past its end in attacker-chosen strides. An on-link attacker can trigger this without authentication via a forged Router Advertisement (O=1) and a forged DHCPv6 REPLY matching xid/CLIENTID with a long DOMAIN_LIST. The impact is unauthenticated on-link crash of connmand (runs as root). This was introduced in bb06c47. |
| HTTP::Server::PSGI versions before 1.0056 for Perl allow a single request to crash the server by declaring a large Content-Length.
The request body is read with sysread() calls sized by the remaining Content-Length. Perl grows the read buffer to the requested length before any data arrives, so the server tries to allocate as much memory as the client declares.
A remote attacker can send one request with a large Content-Length and a few body bytes, and perl exits with an out-of-memory error before the application is called. HTTP::Server::PSGI runs as a single process, so the server stays down until restarted. |
| Starman versions before 0.4019 for Perl allow memory exhaustion via unbounded buffering of chunked request bodies.
The chunked body decoder keeps each chunk in memory until the whole chunk and its CRLF have arrived, and sets no limit on the length of a chunk-size line. A client that declares a huge chunk size and streams data, or sends a chunk-size line that never ends, grows the buffer for as long as it keeps sending.
A remote attacker can exhaust worker memory with a single connection. |
| Starman versions before 0.4019 for Perl send response bodies for HEAD requests, desynchronizing responses on keep-alive connections.
For a HEAD request Starman omits chunked framing but still writes the body returned by the application, on both the array and streaming response paths. Responses with a 1xx, 204 or 304 status also carry the body.
On a keep-alive or pipelined connection the client reads those bytes as the start of the next response. A front-end proxy that reuses upstream connections may then pair responses with the wrong requests. |
| In Eclipse ThreadX versions 6.0.1 through 6.5.2.202603, the Module Manager's thread-control services do not check that a thread passed by a user-mode, memory-protected module belongs to that module. Any loaded module can suspend, resume, terminate, reset or re-prioritise application threads and other modules' threads and abort their waits, denying service or changing how the system schedules them. |
