| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Sphere Manager plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'width' parameter in the 'show_sphere_image' shortcode in all versions up to, and including, 1.0.2 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Super Page Cache plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the Activity Log in all versions up to, and including, 5.2.2 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/io-wq: check IO_WQ_BIT_EXIT inside work run loop
Currently this is checked before running the pending work. Normally this
is quite fine, as work items either end up blocking (which will create a
new worker for other items), or they complete fairly quickly. But syzbot
reports an issue where io-wq takes seemingly forever to exit, and with a
bit of debugging, this turns out to be because it queues a bunch of big
(2GB - 4096b) reads with a /dev/msr* file. Since this file type doesn't
support ->read_iter(), loop_rw_iter() ends up handling them. Each read
returns 16MB of data read, which takes 20 (!!) seconds. With a bunch of
these pending, processing the whole chain can take a long time. Easily
longer than the syzbot uninterruptible sleep timeout of 140 seconds.
This then triggers a complaint off the io-wq exit path:
INFO: task syz.4.135:6326 blocked for more than 143 seconds.
Not tainted syzkaller #0
Blocked by coredump.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz.4.135 state:D stack:26824 pid:6326 tgid:6324 ppid:5957 task_flags:0x400548 flags:0x00080000
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5256 [inline]
__schedule+0x1139/0x6150 kernel/sched/core.c:6863
__schedule_loop kernel/sched/core.c:6945 [inline]
schedule+0xe7/0x3a0 kernel/sched/core.c:6960
schedule_timeout+0x257/0x290 kernel/time/sleep_timeout.c:75
do_wait_for_common kernel/sched/completion.c:100 [inline]
__wait_for_common+0x2fc/0x4e0 kernel/sched/completion.c:121
io_wq_exit_workers io_uring/io-wq.c:1328 [inline]
io_wq_put_and_exit+0x271/0x8a0 io_uring/io-wq.c:1356
io_uring_clean_tctx+0x10d/0x190 io_uring/tctx.c:203
io_uring_cancel_generic+0x69c/0x9a0 io_uring/cancel.c:651
io_uring_files_cancel include/linux/io_uring.h:19 [inline]
do_exit+0x2ce/0x2bd0 kernel/exit.c:911
do_group_exit+0xd3/0x2a0 kernel/exit.c:1112
get_signal+0x2671/0x26d0 kernel/signal.c:3034
arch_do_signal_or_restart+0x8f/0x7e0 arch/x86/kernel/signal.c:337
__exit_to_user_mode_loop kernel/entry/common.c:41 [inline]
exit_to_user_mode_loop+0x8c/0x540 kernel/entry/common.c:75
__exit_to_user_mode_prepare include/linux/irq-entry-common.h:226 [inline]
syscall_exit_to_user_mode_prepare include/linux/irq-entry-common.h:256 [inline]
syscall_exit_to_user_mode_work include/linux/entry-common.h:159 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:194 [inline]
do_syscall_64+0x4ee/0xf80 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fa02738f749
RSP: 002b:00007fa0281ae0e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: fffffffffffffe00 RBX: 00007fa0275e6098 RCX: 00007fa02738f749
RDX: 0000000000000000 RSI: 0000000000000080 RDI: 00007fa0275e6098
RBP: 00007fa0275e6090 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fa0275e6128 R14: 00007fff14e4fcb0 R15: 00007fff14e4fd98
There's really nothing wrong here, outside of processing these reads
will take a LONG time. However, we can speed up the exit by checking the
IO_WQ_BIT_EXIT inside the io_worker_handle_work() loop, as syzbot will
exit the ring after queueing up all of these reads. Then once the first
item is processed, io-wq will simply cancel the rest. That should avoid
syzbot running into this complaint again. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix early read unlock of page with EOF in middle
The read result collection for buffered reads seems to run ahead of the
completion of subrequests under some circumstances, as can be seen in the
following log snippet:
9p_client_res: client 18446612686390831168 response P9_TREAD tag 0 err 0
...
netfs_sreq: R=00001b55[1] DOWN TERM f=192 s=0 5fb2/5fb2 s=5 e=0
...
netfs_collect_folio: R=00001b55 ix=00004 r=4000-5000 t=4000/5fb2
netfs_folio: i=157f3 ix=00004-00004 read-done
netfs_folio: i=157f3 ix=00004-00004 read-unlock
netfs_collect_folio: R=00001b55 ix=00005 r=5000-5fb2 t=5000/5fb2
netfs_folio: i=157f3 ix=00005-00005 read-done
netfs_folio: i=157f3 ix=00005-00005 read-unlock
...
netfs_collect_stream: R=00001b55[0:] cto=5fb2 frn=ffffffff
netfs_collect_state: R=00001b55 col=5fb2 cln=6000 n=c
netfs_collect_stream: R=00001b55[0:] cto=5fb2 frn=ffffffff
netfs_collect_state: R=00001b55 col=5fb2 cln=6000 n=8
...
netfs_sreq: R=00001b55[2] ZERO SUBMT f=000 s=5fb2 0/4e s=0 e=0
netfs_sreq: R=00001b55[2] ZERO TERM f=102 s=5fb2 4e/4e s=5 e=0
The 'cto=5fb2' indicates the collected file pos we've collected results to
so far - but we still have 0x4e more bytes to go - so we shouldn't have
collected folio ix=00005 yet. The 'ZERO' subreq that clears the tail
happens after we unlock the folio, allowing the application to see the
uncleared tail through mmap.
The problem is that netfs_read_unlock_folios() will unlock a folio in which
the amount of read results collected hits EOF position - but the ZERO
subreq lies beyond that and so happens after.
Fix this by changing the end check to always be the end of the folio and
never the end of the file.
In the future, I should look at clearing to the end of the folio here rather
than adding a ZERO subreq to do this. On the other hand, the ZERO subreq can
run in parallel with an async READ subreq. Further, the ZERO subreq may still
be necessary to, say, handle extents in a ceph file that don't have any
backing store and are thus implicitly all zeros.
This can be reproduced by creating a file, the size of which doesn't align
to a page boundary, e.g. 24998 (0x5fb2) bytes and then doing something
like:
xfs_io -c "mmap -r 0 0x6000" -c "madvise -d 0 0x6000" \
-c "mread -v 0 0x6000" /xfstest.test/x
The last 0x4e bytes should all be 00, but if the tail hasn't been cleared
yet, you may see rubbish there. This can be reproduced with kafs by
modifying the kernel to disable the call to netfs_read_subreq_progress()
and to stop afs_issue_read() from doing the async call for NETFS_READAHEAD.
Reproduction can be made easier by inserting an mdelay(100) in
netfs_issue_read() for the ZERO-subreq case.
AFS and CIFS are normally unlikely to show this as they dispatch READ ops
asynchronously, which allows the ZERO-subreq to finish first. 9P's READ op is
completely synchronous, so the ZERO-subreq will always happen after. It isn't
seen all the time, though, because the collection may be done in a worker
thread. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: Fix memleak in nfc_llcp_send_ui_frame().
syzbot reported various memory leaks related to NFC, struct
nfc_llcp_sock, sk_buff, nfc_dev, etc. [0]
The leading log hinted that nfc_llcp_send_ui_frame() failed
to allocate skb due to sock_error(sk) being -ENXIO.
ENXIO is set by nfc_llcp_socket_release() when struct
nfc_llcp_local is destroyed by local_cleanup().
The problem is that there is no synchronisation between
nfc_llcp_send_ui_frame() and local_cleanup(), and skb
could be put into local->tx_queue after it was purged in
local_cleanup():
CPU1 CPU2
---- ----
nfc_llcp_send_ui_frame() local_cleanup()
|- do { '
|- pdu = nfc_alloc_send_skb(..., &err)
| .
| |- nfc_llcp_socket_release(local, false, ENXIO);
| |- skb_queue_purge(&local->tx_queue); |
| ' |
|- skb_queue_tail(&local->tx_queue, pdu); |
... |
|- pdu = nfc_alloc_send_skb(..., &err) |
^._________________________________.'
local_cleanup() is called for struct nfc_llcp_local only
after nfc_llcp_remove_local() unlinks it from llcp_devices.
If we hold local->tx_queue.lock then, we can synchronise
the thread and nfc_llcp_send_ui_frame().
Let's do that and check list_empty(&local->list) before
queuing skb to local->tx_queue in nfc_llcp_send_ui_frame().
[0]:
[ 56.074943][ T6096] llcp: nfc_llcp_send_ui_frame: Could not allocate PDU (error=-6)
[ 64.318868][ T5813] kmemleak: 6 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
BUG: memory leak
unreferenced object 0xffff8881272f6800 (size 1024):
comm "syz.0.17", pid 6096, jiffies 4294942766
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
27 00 03 40 00 00 00 00 00 00 00 00 00 00 00 00 '..@............
backtrace (crc da58d84d):
kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline]
slab_post_alloc_hook mm/slub.c:4979 [inline]
slab_alloc_node mm/slub.c:5284 [inline]
__do_kmalloc_node mm/slub.c:5645 [inline]
__kmalloc_noprof+0x3e3/0x6b0 mm/slub.c:5658
kmalloc_noprof include/linux/slab.h:961 [inline]
sk_prot_alloc+0x11a/0x1b0 net/core/sock.c:2239
sk_alloc+0x36/0x360 net/core/sock.c:2295
nfc_llcp_sock_alloc+0x37/0x130 net/nfc/llcp_sock.c:979
llcp_sock_create+0x71/0xd0 net/nfc/llcp_sock.c:1044
nfc_sock_create+0xc9/0xf0 net/nfc/af_nfc.c:31
__sock_create+0x1a9/0x340 net/socket.c:1605
sock_create net/socket.c:1663 [inline]
__sys_socket_create net/socket.c:1700 [inline]
__sys_socket+0xb9/0x1a0 net/socket.c:1747
__do_sys_socket net/socket.c:1761 [inline]
__se_sys_socket net/socket.c:1759 [inline]
__x64_sys_socket+0x1b/0x30 net/socket.c:1759
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xa4/0xfa0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
BUG: memory leak
unreferenced object 0xffff88810fbd9800 (size 240):
comm "syz.0.17", pid 6096, jiffies 4294942850
hex dump (first 32 bytes):
68 f0 ff 08 81 88 ff ff 68 f0 ff 08 81 88 ff ff h.......h.......
00 00 00 00 00 00 00 00 00 68 2f 27 81 88 ff ff .........h/'....
backtrace (crc 6cc652b1):
kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline]
slab_post_alloc_hook mm/slub.c:4979 [inline]
slab_alloc_node mm/slub.c:5284 [inline]
kmem_cache_alloc_node_noprof+0x36f/0x5e0 mm/slub.c:5336
__alloc_skb+0x203/0x240 net/core/skbuff.c:660
alloc_skb include/linux/skbuff.h:1383 [inline]
alloc_skb_with_frags+0x69/0x3f0 net/core/sk
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not strictly require dirty metadata threshold for metadata writepages
[BUG]
There is an internal report that over 1000 processes are
waiting at the io_schedule_timeout() of balance_dirty_pages(), causing
a system hang and trigger a kernel coredump.
The kernel is v6.4 kernel based, but the root problem still applies to
any upstream kernel before v6.18.
[CAUSE]
From Jan Kara for his wisdom on the dirty page balance behavior first.
This cgroup dirty limit was what was actually playing the role here
because the cgroup had only a small amount of memory and so the dirty
limit for it was something like 16MB.
Dirty throttling is responsible for enforcing that nobody can dirty
(significantly) more dirty memory than there's dirty limit. Thus when
a task is dirtying pages it periodically enters into balance_dirty_pages()
and we let it sleep there to slow down the dirtying.
When the system is over dirty limit already (either globally or within
a cgroup of the running task), we will not let the task exit from
balance_dirty_pages() until the number of dirty pages drops below the
limit.
So in this particular case, as I already mentioned, there was a cgroup
with relatively small amount of memory and as a result with dirty limit
set at 16MB. A task from that cgroup has dirtied about 28MB worth of
pages in btrfs btree inode and these were practically the only dirty
pages in that cgroup.
So that means the only way to reduce the dirty pages of that cgroup is
to writeback the dirty pages of btrfs btree inode, and only after that
those processes can exit balance_dirty_pages().
Now back to the btrfs part, btree_writepages() is responsible for
writing back dirty btree inode pages.
The problem here is, there is a btrfs internal threshold that if the
btree inode's dirty bytes are below the 32M threshold, it will not
do any writeback.
This behavior is to batch as much metadata as possible so we won't write
back those tree blocks and then later re-COW them again for another
modification.
This internal 32MiB is higher than the existing dirty page size (28MiB),
meaning no writeback will happen, causing a deadlock between btrfs and
cgroup:
- Btrfs doesn't want to write back btree inode until more dirty pages
- Cgroup/MM doesn't want more dirty pages for btrfs btree inode
Thus any process touching that btree inode is put into sleep until
the number of dirty pages is reduced.
Thanks Jan Kara a lot for the analysis of the root cause.
[ENHANCEMENT]
Since kernel commit b55102826d7d ("btrfs: set AS_KERNEL_FILE on the
btree_inode"), btrfs btree inode pages will only be charged to the root
cgroup which should have a much larger limit than btrfs' 32MiB
threshold.
So it should not affect newer kernels.
But for all current LTS kernels, they are all affected by this problem,
and backporting the whole AS_KERNEL_FILE may not be a good idea.
Even for newer kernels I still think it's a good idea to get
rid of the internal threshold at btree_writepages(), since for most cases
cgroup/MM has a better view of full system memory usage than btrfs' fixed
threshold.
For internal callers using btrfs_btree_balance_dirty() since that
function is already doing internal threshold check, we don't need to
bother them.
But for external callers of btree_writepages(), just respect their
requests and write back whatever they want, ignoring the internal
btrfs threshold to avoid such deadlock on btree inode dirty page
balancing. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imx/tve: fix probe device leak
Make sure to drop the reference taken to the DDC device during probe on
probe failure (e.g. probe deferral) and on driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: fix use-after-free due to enslave fail after slave array update
Fix a use-after-free which happens due to enslave failure after the new
slave has been added to the array. Since the new slave can be used for Tx
immediately, we can use it after it has been freed by the enslave error
cleanup path which frees the allocated slave memory. Slave update array is
supposed to be called last when further enslave failures are not expected.
Move it after xdp setup to avoid any problems.
It is very easy to reproduce the problem with a simple xdp_pass prog:
ip l add bond1 type bond mode balance-xor
ip l set bond1 up
ip l set dev bond1 xdp object xdp_pass.o sec xdp_pass
ip l add dumdum type dummy
Then run in parallel:
while :; do ip l set dumdum master bond1 1>/dev/null 2>&1; done;
mausezahn bond1 -a own -b rand -A rand -B 1.1.1.1 -c 0 -t tcp "dp=1-1023, flags=syn"
The crash happens almost immediately:
[ 605.602850] Oops: general protection fault, probably for non-canonical address 0xe0e6fc2460000137: 0000 [#1] SMP KASAN NOPTI
[ 605.602916] KASAN: maybe wild-memory-access in range [0x07380123000009b8-0x07380123000009bf]
[ 605.602946] CPU: 0 UID: 0 PID: 2445 Comm: mausezahn Kdump: loaded Tainted: G B 6.19.0-rc6+ #21 PREEMPT(voluntary)
[ 605.602979] Tainted: [B]=BAD_PAGE
[ 605.602998] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 605.603032] RIP: 0010:netdev_core_pick_tx+0xcd/0x210
[ 605.603063] Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 3e 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 6b 08 49 8d 7d 30 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 25 01 00 00 49 8b 45 30 4c 89 e2 48 89 ee 48 89
[ 605.603111] RSP: 0018:ffff88817b9af348 EFLAGS: 00010213
[ 605.603145] RAX: dffffc0000000000 RBX: ffff88817d28b420 RCX: 0000000000000000
[ 605.603172] RDX: 00e7002460000137 RSI: 0000000000000008 RDI: 07380123000009be
[ 605.603199] RBP: ffff88817b541a00 R08: 0000000000000001 R09: fffffbfff3ed8c0c
[ 605.603226] R10: ffffffff9f6c6067 R11: 0000000000000001 R12: 0000000000000000
[ 605.603253] R13: 073801230000098e R14: ffff88817d28b448 R15: ffff88817b541a84
[ 605.603286] FS: 00007f6570ef67c0(0000) GS:ffff888221dfa000(0000) knlGS:0000000000000000
[ 605.603319] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 605.603343] CR2: 00007f65712fae40 CR3: 000000011371b000 CR4: 0000000000350ef0
[ 605.603373] Call Trace:
[ 605.603392] <TASK>
[ 605.603410] __dev_queue_xmit+0x448/0x32a0
[ 605.603434] ? __pfx_vprintk_emit+0x10/0x10
[ 605.603461] ? __pfx_vprintk_emit+0x10/0x10
[ 605.603484] ? __pfx___dev_queue_xmit+0x10/0x10
[ 605.603507] ? bond_start_xmit+0xbfb/0xc20 [bonding]
[ 605.603546] ? _printk+0xcb/0x100
[ 605.603566] ? __pfx__printk+0x10/0x10
[ 605.603589] ? bond_start_xmit+0xbfb/0xc20 [bonding]
[ 605.603627] ? add_taint+0x5e/0x70
[ 605.603648] ? add_taint+0x2a/0x70
[ 605.603670] ? end_report.cold+0x51/0x75
[ 605.603693] ? bond_start_xmit+0xbfb/0xc20 [bonding]
[ 605.603731] bond_start_xmit+0x623/0xc20 [bonding] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix memory leak in set_ssp_complete
Fix memory leak in set_ssp_complete() where mgmt_pending_cmd structures
are not freed after being removed from the pending list.
Commit 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs") replaced
mgmt_pending_foreach() calls with individual command handling but missed
adding mgmt_pending_free() calls in both error and success paths of
set_ssp_complete(). Other completion functions like set_le_complete()
were fixed correctly in the same commit.
This causes a memory leak of the mgmt_pending_cmd structure and its
associated parameter data for each SSP command that completes.
Add the missing mgmt_pending_free(cmd) calls in both code paths to fix
the memory leak. Also fix the same issue in set_advertising_complete(). |
| In the Linux kernel, the following vulnerability has been resolved:
sfc: fix deadlock in RSS config read
Since cited commit, core locks the net_device's rss_lock when handling
ethtool -x command, so driver's implementation should not lock it
again. Remove the latter. |
| The StickEasy Protected Contact Form plugin for WordPress is vulnerable to Sensitive Information Disclosure in all versions up to, and including, 1.0.2. The plugin stores spam detection logs at a predictable publicly accessible location (wp-content/uploads/stickeasy-protected-contact-form/spcf-log.txt). This makes it possible for unauthenticated attackers to download the log file and access sensitive information including visitor IP addresses, email addresses, and comment snippets from contact form submissions that were flagged as spam. |
| The MDirector Newsletter plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 4.5.8. This is due to missing nonce verification on the mdirectorNewsletterSave function. This makes it possible for unauthenticated attackers to update the plugin's settings via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. |
| The Link Hopper plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the ‘hop_name’ parameter in all versions up to, and including, 2.5 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level access, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installations and installations where unfiltered_html has been disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: provide a net pointer to __skb_flow_dissect()
After 3cbf4ffba5ee ("net: plumb network namespace into __skb_flow_dissect")
we have to provide a net pointer to __skb_flow_dissect(),
either via skb->dev, skb->sk, or a user provided pointer.
In the following case, syzbot was able to cook a bare skb.
WARNING: net/core/flow_dissector.c:1131 at __skb_flow_dissect+0xb57/0x68b0 net/core/flow_dissector.c:1131, CPU#1: syz.2.1418/11053
Call Trace:
<TASK>
bond_flow_dissect drivers/net/bonding/bond_main.c:4093 [inline]
__bond_xmit_hash+0x2d7/0xba0 drivers/net/bonding/bond_main.c:4157
bond_xmit_hash_xdp drivers/net/bonding/bond_main.c:4208 [inline]
bond_xdp_xmit_3ad_xor_slave_get drivers/net/bonding/bond_main.c:5139 [inline]
bond_xdp_get_xmit_slave+0x1fd/0x710 drivers/net/bonding/bond_main.c:5515
xdp_master_redirect+0x13f/0x2c0 net/core/filter.c:4388
bpf_prog_run_xdp include/net/xdp.h:700 [inline]
bpf_test_run+0x6b2/0x7d0 net/bpf/test_run.c:421
bpf_prog_test_run_xdp+0x795/0x10e0 net/bpf/test_run.c:1390
bpf_prog_test_run+0x2c7/0x340 kernel/bpf/syscall.c:4703
__sys_bpf+0x562/0x860 kernel/bpf/syscall.c:6182
__do_sys_bpf kernel/bpf/syscall.c:6274 [inline]
__se_sys_bpf kernel/bpf/syscall.c:6272 [inline]
__x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:6272
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xec/0xf80 arch/x86/entry/syscall_64.c:94 |
| In the Linux kernel, the following vulnerability has been resolved:
mISDN: annotate data-race around dev->work
dev->work can re read locklessly in mISDN_read()
and mISDN_poll(). Add READ_ONCE()/WRITE_ONCE() annotations.
BUG: KCSAN: data-race in mISDN_ioctl / mISDN_read
write to 0xffff88812d848280 of 4 bytes by task 10864 on cpu 1:
misdn_add_timer drivers/isdn/mISDN/timerdev.c:175 [inline]
mISDN_ioctl+0x2fb/0x550 drivers/isdn/mISDN/timerdev.c:233
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl+0xce/0x140 fs/ioctl.c:583
__x64_sys_ioctl+0x43/0x50 fs/ioctl.c:583
x64_sys_call+0x14b0/0x3000 arch/x86/include/generated/asm/syscalls_64.h:17
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xd8/0x2c0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
read to 0xffff88812d848280 of 4 bytes by task 10857 on cpu 0:
mISDN_read+0x1f2/0x470 drivers/isdn/mISDN/timerdev.c:112
do_loop_readv_writev fs/read_write.c:847 [inline]
vfs_readv+0x3fb/0x690 fs/read_write.c:1020
do_readv+0xe7/0x210 fs/read_write.c:1080
__do_sys_readv fs/read_write.c:1165 [inline]
__se_sys_readv fs/read_write.c:1162 [inline]
__x64_sys_readv+0x45/0x50 fs/read_write.c:1162
x64_sys_call+0x2831/0x3000 arch/x86/include/generated/asm/syscalls_64.h:20
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xd8/0x2c0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
value changed: 0x00000000 -> 0x00000001 |
| In the Linux kernel, the following vulnerability has been resolved:
igc: Reduce TSN TX packet buffer from 7KB to 5KB per queue
The previous 7 KB per queue caused TX unit hangs under heavy
timestamping load. Reducing to 5 KB avoids these hangs and matches
the TSN recommendation in I225/I226 SW User Manual Section 7.5.4.
The 8 KB "freed" by this change is currently unused. This reduction
is not expected to impact throughput, as the i226 is PCIe-limited
for small TSN packets rather than TX-buffer-limited. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: Set __nocfi on swsusp_arch_resume()
A DABT is reported[1] on an android based system when resume from hiberate.
This happens because swsusp_arch_suspend_exit() is marked with SYM_CODE_*()
and does not have a CFI hash, but swsusp_arch_resume() will attempt to
verify the CFI hash when calling a copy of swsusp_arch_suspend_exit().
Given that there's an existing requirement that the entrypoint to
swsusp_arch_suspend_exit() is the first byte of the .hibernate_exit.text
section, we cannot fix this by marking swsusp_arch_suspend_exit() with
SYM_FUNC_*(). The simplest fix for now is to disable the CFI check in
swsusp_arch_resume().
Mark swsusp_arch_resume() as __nocfi to disable the CFI check.
[1]
[ 22.991934][ T1] Unable to handle kernel paging request at virtual address 0000000109170ffc
[ 22.991934][ T1] Mem abort info:
[ 22.991934][ T1] ESR = 0x0000000096000007
[ 22.991934][ T1] EC = 0x25: DABT (current EL), IL = 32 bits
[ 22.991934][ T1] SET = 0, FnV = 0
[ 22.991934][ T1] EA = 0, S1PTW = 0
[ 22.991934][ T1] FSC = 0x07: level 3 translation fault
[ 22.991934][ T1] Data abort info:
[ 22.991934][ T1] ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000
[ 22.991934][ T1] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 22.991934][ T1] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 22.991934][ T1] [0000000109170ffc] user address but active_mm is swapper
[ 22.991934][ T1] Internal error: Oops: 0000000096000007 [#1] PREEMPT SMP
[ 22.991934][ T1] Dumping ftrace buffer:
[ 22.991934][ T1] (ftrace buffer empty)
[ 22.991934][ T1] Modules linked in:
[ 22.991934][ T1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.6.98-android15-8-g0b1d2aee7fc3-dirty-4k #1 688c7060a825a3ac418fe53881730b355915a419
[ 22.991934][ T1] Hardware name: Unisoc UMS9360-base Board (DT)
[ 22.991934][ T1] pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 22.991934][ T1] pc : swsusp_arch_resume+0x2ac/0x344
[ 22.991934][ T1] lr : swsusp_arch_resume+0x294/0x344
[ 22.991934][ T1] sp : ffffffc08006b960
[ 22.991934][ T1] x29: ffffffc08006b9c0 x28: 0000000000000000 x27: 0000000000000000
[ 22.991934][ T1] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000820
[ 22.991934][ T1] x23: ffffffd0817e3000 x22: ffffffd0817e3000 x21: 0000000000000000
[ 22.991934][ T1] x20: ffffff8089171000 x19: ffffffd08252c8c8 x18: ffffffc080061058
[ 22.991934][ T1] x17: 00000000529c6ef0 x16: 00000000529c6ef0 x15: 0000000000000004
[ 22.991934][ T1] x14: ffffff8178c88000 x13: 0000000000000006 x12: 0000000000000000
[ 22.991934][ T1] x11: 0000000000000015 x10: 0000000000000001 x9 : ffffffd082533000
[ 22.991934][ T1] x8 : 0000000109171000 x7 : 205b5d3433393139 x6 : 392e32322020205b
[ 22.991934][ T1] x5 : 000000010916f000 x4 : 000000008164b000 x3 : ffffff808a4e0530
[ 22.991934][ T1] x2 : ffffffd08058e784 x1 : 0000000082326000 x0 : 000000010a283000
[ 22.991934][ T1] Call trace:
[ 22.991934][ T1] swsusp_arch_resume+0x2ac/0x344
[ 22.991934][ T1] hibernation_restore+0x158/0x18c
[ 22.991934][ T1] load_image_and_restore+0xb0/0xec
[ 22.991934][ T1] software_resume+0xf4/0x19c
[ 22.991934][ T1] software_resume_initcall+0x34/0x78
[ 22.991934][ T1] do_one_initcall+0xe8/0x370
[ 22.991934][ T1] do_initcall_level+0xc8/0x19c
[ 22.991934][ T1] do_initcalls+0x70/0xc0
[ 22.991934][ T1] do_basic_setup+0x1c/0x28
[ 22.991934][ T1] kernel_init_freeable+0xe0/0x148
[ 22.991934][ T1] kernel_init+0x20/0x1a8
[ 22.991934][ T1] ret_from_fork+0x10/0x20
[ 22.991934][ T1] Code: a9400a61 f94013e0 f9438923 f9400a64 (b85fc110)
[catalin.marinas@arm.com: commit log updated by Mark Rutland] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs: cleanup attrs subdirs on context dir setup failure
When a context DAMON sysfs directory setup is failed after setup of attrs/
directory, subdirectories of attrs/ directory are not cleaned up. As a
result, DAMON sysfs interface is nearly broken until the system reboots,
and the memory for the unremoved directory is leaked.
Cleanup the directories under such failures. |
| In the Linux kernel, the following vulnerability has been resolved:
firewire: core: fix race condition against transaction list
The list of transaction is enumerated without acquiring card lock when
processing AR response event. This causes a race condition bug when
processing AT request completion event concurrently.
This commit fixes the bug by put timer start for split transaction
expiration into the scope of lock. The value of jiffies in card structure
is referred before acquiring the lock. |
| In the Linux kernel, the following vulnerability has been resolved:
efivarfs: fix error propagation in efivar_entry_get()
efivar_entry_get() always returns success even if the underlying
__efivar_entry_get() fails, masking errors.
This may result in uninitialized heap memory being copied to userspace
in the efivarfs_file_read() path.
Fix it by returning the error from __efivar_entry_get(). |
