| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A Business Logic vulnerability exists in SourceCodester Loan Management System v1.0 due to the lack of proper input validation. The application allows administrators to define "Loan Plans" which determine the duration of a loan (in months). However, the backend fails to validate that the duration must be a positive integer. An attacker can submit a negative value for the months parameter. The system accepts this invalid data and creates a loan plan with a negative duration. |
| A Reflected Cross-Site Scripting (XSS) vulnerability exists in SourceCodester Zoo Management System v1.0. The vulnerability is located in the login page, specifically within the msg parameter. The application reflects the content of the msg parameter back to the user without proper HTML encoding or sanitization. This allows remote attackers to inject arbitrary web script or HTML via a crafted URL. |
| A Business Logic vulnerability exists in SourceCodester Pharmacy Product Management System 1.0. The vulnerability is located in the add-sales.php file. The application fails to validate the "txtprice" and "txttotalcost" parameters, allowing attackers to submit negative values for sales transactions. This leads to incorrect financial calculations, corruption of sales reports, and potential financial loss. |
| TOTOlink A3600R v5.9c.4959 contains a buffer overflow vulnerability in the setAppEasyWizardConfig interface of /lib/cste_modules/app.so. The vulnerability occurs because the rootSsid parameter is not properly validated for length, allowing remote attackers to trigger a buffer overflow, potentially leading to arbitrary code execution or denial of service. |
| An issue was discovered in Mbed TLS 3.5.0 through 4.0.0. Client impersonation can occur while resuming a TLS 1.3 session. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Drop/zap existing present SPTE even when creating an MMIO SPTE
When installing an emulated MMIO SPTE, do so *after* dropping/zapping the
existing SPTE (if it's shadow-present). While commit a54aa15c6bda3 was
right about it being impossible to convert a shadow-present SPTE to an
MMIO SPTE due to a _guest_ write, it failed to account for writes to guest
memory that are outside the scope of KVM.
E.g. if host userspace modifies a shadowed gPTE to switch from a memslot
to emulted MMIO and then the guest hits a relevant page fault, KVM will
install the MMIO SPTE without first zapping the shadow-present SPTE.
------------[ cut here ]------------
is_shadow_present_pte(*sptep)
WARNING: arch/x86/kvm/mmu/mmu.c:484 at mark_mmio_spte+0xb2/0xc0 [kvm], CPU#0: vmx_ept_stale_r/4292
Modules linked in: kvm_intel kvm irqbypass
CPU: 0 UID: 1000 PID: 4292 Comm: vmx_ept_stale_r Not tainted 7.0.0-rc2-eafebd2d2ab0-sink-vm #319 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:mark_mmio_spte+0xb2/0xc0 [kvm]
Call Trace:
<TASK>
mmu_set_spte+0x237/0x440 [kvm]
ept_page_fault+0x535/0x7f0 [kvm]
kvm_mmu_do_page_fault+0xee/0x1f0 [kvm]
kvm_mmu_page_fault+0x8d/0x620 [kvm]
vmx_handle_exit+0x18c/0x5a0 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0xc55/0x1c20 [kvm]
kvm_vcpu_ioctl+0x2d5/0x980 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0xb5/0x730
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x47fa3f
</TASK>
---[ end trace 0000000000000000 ]--- |
| Insufficient permission validation on multiple REST API Quick Setup endpoints in Checkmk 2.5.0 (beta) before version 2.5.0b2 and 2.4.0 before version 2.4.0p25 allows low-privileged users to perform unauthorized actions or obtain sensitive information |
| A vulnerability was identified in MEPIS RM, an industrial
software product developed by Metronik. The application contained a hardcoded
cryptographic key within the Mx.Web.ComponentModel.dll component. When the
option to store domain passwords was enabled, this key was used to encrypt user
passwords before storing them in the application’s database. An attacker with
sufficient privileges to access the database could extract the encrypted
passwords, decrypt them using the embedded key, and gain unauthorized access to
the associated ICS/OT environment. |
| MetInfo CMS versions 7.9, 8.0, and 8.1 contain an unauthenticated PHP code injection vulnerability that allows remote attackers to execute arbitrary code by sending crafted requests with malicious PHP code. Attackers can exploit insufficient input neutralization in the execution path to achieve remote code execution and gain full control over the affected server. |
| A local file inclusion vulnerability in the upload/download flow of the VertiGIS FM application allows authenticated attackers to read arbitrary files from the server by manipulating a file's path during its upload. When the file is subsequently downloaded, the file in the attacker controlled path is returned. Due to the application's ASP.NET architecture, this could potentially lead to remote code execution when the "web.config" file is obtained. Furthermore, the application resolves UNC paths which may enable NTLM-relaying attacks.
This issue affects VertiGIS FM: 10.5.00119 (0d29d428). |
| A flaw was found in Corosync. A remote unauthenticated attacker can exploit a wrong return value vulnerability in the Corosync membership commit token sanity check by sending a specially crafted User Datagram Protocol (UDP) packet. This can lead to an out-of-bounds read, causing a denial of service (DoS) and potentially disclosing limited memory contents. This vulnerability affects Corosync when running in totemudp/totemudpu mode, which is the default configuration. |
| A flaw was found in Corosync. An integer overflow vulnerability in Corosync's join message sanity validation allows a remote, unauthenticated attacker to send crafted User Datagram Protocol (UDP) packets. This can cause the service to crash, leading to a denial of service. This vulnerability specifically affects Corosync deployments configured to use totemudp/totemudpu mode. |
| OpenViking versions 0.2.5 prior to 0.2.14 contain a missing authentication vulnerability in the bot proxy router that allows remote unauthenticated attackers to access protected bot proxy functionality by sending requests to the POST /bot/v1/chat and POST /bot/v1/chat/stream endpoints. Attackers can bypass authentication checks and interact directly with the upstream bot backend through the OpenViking proxy without providing valid credentials. |
| pymanager included the current working directory in sys.path meaning modules could be shadowed by modules in the current working directory. As a result, if a user executes a pymanager-generated command (e.g., pip, pytest)
from an attacker-controlled directory, a malicious module in that
directory can be imported and executed instead of the intended package. |
| A flaw was found in libinput. A local attacker who can place a specially crafted Lua bytecode file in certain system or user configuration directories can bypass security restrictions. This allows the attacker to run unauthorized code with the same permissions as the program using libinput, such as a graphical compositor. This could lead to the attacker monitoring keyboard input and sending that information to an external location. |
| A flaw was found in libinput. An attacker capable of deploying a Lua plugin file in specific system directories can exploit a dangling pointer vulnerability. This occurs when a garbage collection cleanup function is called, leaving a pointer that can then be printed to system logs. This could potentially expose sensitive data if the memory location is re-used, leading to information disclosure. For this exploit to work, Lua plugins must be enabled in libinput and loaded by the compositor. |
| Tina is a headless content management system. Prior to version 2.2.2, a path traversal vulnerability in @tinacms/graphql allows unauthenticated users to write and overwrite arbitrary files within the project root. This is achieved by manipulating the relativePath parameter in GraphQL mutations. The impact includes the ability to replace critical server configuration files and potentially execute arbitrary commands by sabotaging build script. This issue has been patched in version 2.2.2. |
| Tina is a headless content management system. Prior to version 2.2.2, @tinacms/graphql uses string-based path containment checks in FilesystemBridge. That blocks plain ../ traversal, but it does not resolve symlink or junction targets. If a symlink/junction already exists under the allowed content root, a path like content/posts/pivot/owned.md is still considered "inside" the base even though the real filesystem target can be outside it. As a result, FilesystemBridge.get(), put(), delete(), and glob() can operate on files outside the intended root. This issue has been patched in version 2.2.2. |
| Tina is a headless content management system. Prior to version 2.2.2, @tinacms/cli recently added lexical path-traversal checks to the dev media routes, but the implementation still validates only the path string and does not resolve symlink or junction targets. If a link already exists under the media root, Tina accepts a path like pivot/written-from-media.txt as "inside" the media directory and then performs real filesystem operations through that link target. This allows out-of-root media listing and write access, and the same root cause also affects delete. This issue has been patched in version 2.2.2. |
| Auth0-PHP is a PHP SDK for Auth0 Authentication and Management APIs. From version 8.0.0 to before version 8.19.0, in applications built with the Auth0 PHP SDK, cookies are encrypted with insufficient entropy, which may result in threat actors brute-forcing the encryption key and forging session cookies. This issue has been patched in version 8.19.0. |
