| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: fix packet loop on netem when duplicate is on
When netem duplicates a packet it re-enqueues the copy at the root qdisc.
If another netem sits in the tree the copy can be duplicated
again, recursing until the stack or memory is exhausted.
The original duplication guard temporarily zeroed q->duplicate around
the re-enqueue, but that does not cover all cases because it is
per-qdisc state shared across all concurrent enqueue paths
and is not safe without additional locking.
Use the skb tc_depth field introduced in an earlier patch:
- increment it on the duplicate before re-enqueue
- skip duplication for any skb whose tc_depth is already non-zero.
This marks the packet itself rather than mutating qdisc state,
therefore it is safe regardless of tree topology or concurrency. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Correctly cap ZCR_EL2 provided by a guest hypervisor
ZCR_EL2 can be updated by a VHE guest hypervisor either using ZCR_EL2
(which traps) or ZCR_EL1 (which does not trap). KVM handles both in
different way:
- on ZCR_EL2 trap, ZCR_EL2.LEN is immediately capped at the VM's own
VL limit. This has the potential to break existing SW that relies
on the full LEN field to be stateful.
- on ZCR_EL1 access, we do absolutely nothing.
On restoring the SVE context for an L2 guest, we directly restore the
guest hypervisor's view of ZCR_EL2 into the physical ZCR_EL2. If the
guest's view of the register was updated using the ZCR_EL2 accessor,
the value has already been sanitised (with the caveat mentioned above).
But if the guest used ZCR_EL1, the raw value is written into the HW,
and the L2 guest can now access VLs that it shouldn't.
Fix all the above by moving the VL capping to the restore points,
ensuring that:
- the HW is always programmed with a capped value, irrespective of
the accessor being used,
- the ZCR_EL2.LEN field is always completely stateful, irrespective
of the accessor being used.
Additionally, move ZCR_EL2 to be a sanitised register, ensuring that
only the LEN field is actually stateful. This requires some creative
construction of the RES0 mask, as the sysreg generation script does
not yet generate RAZ/WI fields.
[maz: rewrote commit message, tidy up access_zcr_el2()] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix amdgpu_hmm_range_get_pages
The notifier sequence must only be read once or otherwise we could work
with invalid pages.
While at it also fix the coding style, e.g. drop the pre-initialized
return value and use the common define for 2G range.
(cherry picked from commit c08972f555945cda57b0adb72272a37910153390) |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: add hook transactions for device deletions
Restore the flag that indicates that the hook is going away, ie.
NFT_HOOK_REMOVE, but add a new transaction object to track deletion
of hooks without altering the basechain/flowtable hook_list during
the preparation phase.
The existing approach that moves the hook from the basechain/flowtable
hook_list to transaction hook_list breaks netlink dump path readers
of this RCU-protected list.
It should be possible use an array for nft_trans_hook to store the
deleted hooks to compact the representation but I am not expecting
many hook object, specially now that wildcard support for devices
is in place.
Note that the nft_trans_chain_hooks() list contains a list of struct
nft_trans_hook objects for DELCHAIN and DELFLOWTABLE commands, while
this list stores struct nft_hook objects for NEWCHAIN and NEWFLOWTABLE.
Note that new commands can be updated to use nft_trans_hook for
consistency.
This patch also adapts the event notification path to deal with the list
of hook transactions. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: read COW data with the original inode during atomic write
When updating an atomic-write file, f2fs_write_begin() may read the
previously written data back from the COW inode:
prepare_atomic_write_begin() locates the block in the COW inode and sets
use_cow, and the read bio is then built with the COW inode:
f2fs_submit_page_read(use_cow ? F2FS_I(inode)->cow_inode : inode,
...);
and f2fs_grab_read_bio() decides whether to schedule fs-layer decryption
(STEP_DECRYPT) for the bio based on that inode via
fscrypt_inode_uses_fs_layer_crypto().
However, the folio being filled belongs to the original inode
(folio->mapping->host == inode), and the data stored in the COW block was
encrypted (or left as plaintext) using the original inode's context, not
the COW inode's -- see f2fs_encrypt_one_page(), which keys off
fio->page->mapping->host. fscrypt_decrypt_pagecache_blocks() likewise
operates on folio->mapping->host.
The COW inode is created as a tmpfile in the parent directory and inherits
its encryption policy from there. With test_dummy_encryption the newly
created COW inode gets the dummy policy and becomes encrypted, while a
pre-existing regular file -- created before the policy applied, e.g.
already present in the on-disk image -- stays unencrypted. The read
path then sets STEP_DECRYPT based on the encrypted COW inode and calls
fscrypt_decrypt_pagecache_blocks() on a folio whose host (the unencrypted
original inode) has a NULL ->i_crypt_info, dereferencing it:
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
RIP: 0010:fscrypt_decrypt_pagecache_blocks+0xa0/0x310
Workqueue: f2fs_post_read_wq f2fs_post_read_work
Call Trace:
fscrypt_decrypt_bio+0x1eb/0x340
f2fs_post_read_work+0xba/0x140
process_one_work+0x91c/0x1a40
worker_thread+0x677/0xe90
kthread+0x2bc/0x3a0
The COW inode is only needed to locate the on-disk block, and that block
address is already resolved into @blkaddr by prepare_atomic_write_begin()
via __find_data_block(cow_inode, ...); f2fs_submit_page_read() then reads
from that physical @blkaddr directly, so the inode argument only selects
the post-read crypto context, not which block is fetched. Reading with
@inode therefore returns the same (latest, not-yet-committed) COW data,
while making both the fs-layer decryption decision and the inline crypto
path use the correct (original inode's) key.
With the COW inode no longer used at the read site, the use_cow flag has no
remaining consumer; drop it from f2fs_write_begin() and
prepare_atomic_write_begin(). |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: omap2: fix use-after-free in omapfb_mmap
omapfb_mmap() has a race condition with OMAPFB_SETUP_PLANE ioctl that
can lead to use-after-free:
The fb_mmap() entry point holds mm_lock but not lock (fb_info->lock),
while ioctl handlers like OMAPFB_SETUP_PLANE hold lock but not mm_lock.
This allows concurrent execution.
In omapfb_mmap():
1. rg = omapfb_get_mem_region(ofbi->region); // Get old region ref
2. start = omapfb_get_region_paddr(ofbi); // Read from NEW region
3. len = fix->smem_len; // Read from NEW region
4. vm_iomap_memory(vma, start, len); // Map NEW region memory
5. atomic_inc(&rg->map_count); // Increment OLD region!
Concurrently, OMAPFB_SETUP_PLANE can:
- Reassign ofbi->region = new_rg
- Update fix->smem_len
- OMAPFB_SETUP_MEM then checks NEW region's map_count (0!) and frees it
This leaves userspace with a mapping to freed physical memory.
The fix is to read all required values (start, len) from the same
region reference (rg) that will have its map_count incremented,
preventing the region from being freed while still mapped. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: max77705: Free allocated workqueue and fix removal order
Use devm interface for allocating workqueue to fix two bugs at the same
time:
1. Driver leaks the memory on remove(), because the workqueue is not
destroyed.
2. Driver allocates workqueue and then registers interrupt handlers
with devm interface. This means that probe error paths will not use a
reversed order, but first destroy the workqueue and then, via devm
release handlers, free the interrupt.
The interrupt handler schedules work on this exact workqueue, thus if
interrupt is hit in this short time window - after destroying
workqueue, but before devm() frees the interrupt - the schedulled
work will lead to use of freed memory.
Change is not equivalent in the workqueue itself: use non-legacy API
which does not set (__WQ_LEGACY | WQ_MEM_RECLAIM). The workqueue is
used to update power supply (power_supply_changed()) status, thus there
is no point to run it for memory reclaim. Note that dev_name() is not
directly used in second argument to prevent possible unlikely parsing
any "%" character in device name as format. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phonet: do not BUG_ON() in pn_socket_autobind() on failed bind
syzbot reported a kernel BUG triggered from pn_socket_sendmsg() via
pn_socket_autobind():
kernel BUG at net/phonet/socket.c:213!
RIP: 0010:pn_socket_autobind net/phonet/socket.c:213 [inline]
RIP: 0010:pn_socket_sendmsg+0x240/0x250 net/phonet/socket.c:421
Call Trace:
sock_sendmsg_nosec+0x112/0x150 net/socket.c:797
__sock_sendmsg net/socket.c:812 [inline]
__sys_sendto+0x402/0x590 net/socket.c:2280
...
pn_socket_autobind() calls pn_socket_bind() with port 0 and, on
-EINVAL, assumes the socket was already bound and asserts that the
port is non-zero:
err = pn_socket_bind(sock, ..., sizeof(struct sockaddr_pn));
if (err != -EINVAL)
return err;
BUG_ON(!pn_port(pn_sk(sock->sk)->sobject));
return 0; /* socket was already bound */
However pn_socket_bind() also returns -EINVAL when sk->sk_state is not
TCP_CLOSE, even when the socket has never been bound and pn_port() is
still 0. In that case the BUG_ON() fires and panics the kernel from a
user-triggerable path.
Treat the "bind returned -EINVAL but pn_port() is still 0" case as a
regular error and propagate -EINVAL to the caller instead of crashing.
Existing callers already translate a non-zero return from
pn_socket_autobind() into -ENOBUFS/-EAGAIN, so returning -EINVAL here
only changes behaviour from panic to a normal errno. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Wrap DCN32 phantom-plane allocation in DC_RUN_WITH_PREEMPTION_ENABLED
[Why]
dcn32_validate_bandwidth() wraps dcn32_internal_validate_bw() with
DC_FP_START()/DC_FP_END(). In x86 non-RT, DC_FP_START takes fpregs_lock(),
which disables local softirqs.
The DML1 path through dcn32_enable_phantom_plane() calls kvzalloc() to
allocate ~335 KiB for dc_plane_state. This triggers the vmalloc path,
which calls BUG_ON(in_interrupt()) because it's invoked within the
FPU-enabled (softirq disabled) region, leading to a kernel crash.
[How]
Wrap the dc_state_create_phantom_plane() call with the
DC_RUN_WITH_PREEMPTION_ENABLED() macro to allow preemption during
this memory allocation.
(cherry picked from commit 885ccbef7b94a8b38f69c4211c679021aa27ad11) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: enforce HE/EHT cap/oper consistency
Xiang Mei reports that mac80211 could crash if eht_cap is set
but eht_oper isn't. Rather than fixing that for the individual
user(s), enforce that both HE/EHT have consistent elements. |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: ocp: fix resource freeing order
Commit a60fc3294a37 ("ptp: rework ptp_clock_unregister() to disable
events") added a call to ptp_disable_all_events() which changes the
configuration of pins if they support EXTTS events. In ptp_ocp_detach()
pins resources are freed before ptp_clock_unregister() and it leads to
use-after-free during driver removal. Fix it by changing the order of
free/unregister calls. To avoid irq handler running on the other core
while ptp device unregistering, call synchronize_irq() after HW is
configured to stop producing irqs and no irqs are in-flight. |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: reset per-IO canceled flag on each fetch
If a ublk server starts recovering devices but dies before issuing fetch
commands for all IOs, cancellation of the fetch commands that were
successfully issued may never complete. This is because the per-IO
canceled flag can remain set even after the fetch for that IO has been
submitted - the per-IO canceled flags for all IOs in a queue are reset
together only once all IOs for that queue have been fetched. So if a
nonempty proper subset of the IOs for a queue are fetched when the ublk
server dies, the IOs in that subset will never successfully be canceled,
as their canceled flags remain set, and this prevents ublk_cancel_cmd
from actually calling io_uring_cmd_done on the commands, despite the
fact that they are outstanding.
Fix this by resetting the per-IO cancel flags immediately when each IO
is fetched instead of waiting for all IOs for the queue (which may never
happen). |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/64s: Fix unmap race with PMD migration entries
The following race is possible with migration swap entries or
device-private THP entries. e.g. when move_pages is called on a PMD THP
page, then there maybe an intermediate state, where PMD entry acts as
a migration swap entry (pmd_present() is true). Then if an munmap
happens at the same time, then this VM_BUG_ON() can happen in
pmdp_huge_get_and_clear_full().
This patch fixes that.
Thread A: move_pages() syscall
add_folio_for_migration()
mmap_read_lock(mm)
folio_isolate_lru(folio)
mmap_read_unlock(mm)
do_move_pages_to_node()
migrate_pages()
try_to_migrate_one()
spin_lock(ptl)
set_pmd_migration_entry()
pmdp_invalidate() # PMD: _PAGE_INVALID | _PAGE_PTE | pfn
set_pmd_at() # PMD: migration swap entry (pmd_present=0)
spin_unlock(ptl)
[page copy phase] # <--- RACE WINDOW -->
Thread B: munmap()
mmap_write_downgrade(mm)
unmap_vmas() -> zap_pmd_range()
zap_huge_pmd()
__pmd_trans_huge_lock()
pmd_is_huge(): # !pmd_present && !pmd_none -> TRUE (swap entry)
pmd_lock() -> # spin_lock(ptl), waits for Thread A to release ptl
pmdp_huge_get_and_clear_full()
VM_BUG_ON(!pmd_present(*pmdp)) # HITS!
[ 287.738700][ T1867] ------------[ cut here ]------------
[ 287.743843][ T1867] kernel BUG at arch/powerpc/mm/book3s64/pgtable.c:187!
cpu 0x0: Vector: 700 (Program Check) at [c00000044037f4f0]
pc: c000000000094ca4: pmdp_huge_get_and_clear_full+0x6c/0x23c
lr: c000000000645dec: zap_huge_pmd+0xb0/0x868
sp: c00000044037f790
msr: 800000000282b033
current = 0xc0000004032c1a00
paca = 0xc000000004fe0000 irqmask: 0x03 irq_happened: 0x09
pid = 1867, comm = a.out
kernel BUG at :187!
Linux version 6.19.0-12136-g14360d4f917c-dirty (powerpc64le-linux-gnu-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #27 SMP PREEMPT Sun Feb 22 10:38:56 IST 2026
enter ? for help
[link register ] c000000000645dec zap_huge_pmd+0xb0/0x868
[c00000044037f790] c00000044037f7d0 (unreliable)
[c00000044037f7d0] c000000000645dcc zap_huge_pmd+0x90/0x868
[c00000044037f840] c0000000005724cc unmap_page_range+0x176c/0x1f40
[c00000044037fa00] c000000000572ea0 unmap_vmas+0xb0/0x1d8
[c00000044037fa90] c0000000005af254 unmap_region+0xb4/0x128
[c00000044037fb50] c0000000005af400 vms_complete_munmap_vmas+0x138/0x310
[c00000044037fbe0] c0000000005b0f1c do_vmi_align_munmap+0x1ec/0x238
[c00000044037fd30] c0000000005b3688 __vm_munmap+0x170/0x1f8
[c00000044037fdf0] c000000000587f74 sys_munmap+0x2c/0x40
[c00000044037fe10] c000000000032668 system_call_exception+0x128/0x350
[c00000044037fe50] c00000000000d05c system_call_vectored_common+0x15c/0x2ec
---- Exception: 3000 (System Call Vectored) at 0000000010064a2c
SP (7fff9b1ee9c0) is in userspace
0:mon> zh
commit a30b48bf1b24 ("mm/migrate_device: implement THP migration of zone device pages"),
enabled migration for device-private PMD entries. Hence this is one
other path where this warning could get trigger from.
------------[ cut here ]------------
WARNING: arch/powerpc/mm/book3s64/hash_pgtable.c:199 at hash__pmd_hugepage_update+0x48/0x284, CPU#3: hmm-tests/1905
Modules linked in: test_hmm
CPU: 3 UID: 0 PID: 1905 Comm: hmm-tests Tainted: G B W L N 7.0.0-rc1-01438-g7e2f0ee7581c #21 PREEMPT
Tainted: [B]=BAD_PAGE, [W]=WARN, [L]=SOFTLOCKUP, [N]=TEST
Hardware name: IBM pSeries (emulated by qemu) POWER10 (architected) 0x801200 0xf000006 of:SLOF,git-ee03ae pSeries
NIP [c000000000096b70] hash__pmd_hugepage_update+0x48/0x284
LR [c000000000096e7c] hash__pmdp_huge_get_and_clear+0xd0/0xd4
Call Trace:
[c000000604707670] [c000000004e102b8] 0xc000000004e102b8 (unreliable)
[c000000604707700] [c00000000064ec3c] set_pmd_migration_entry+0x414/0x498
[c000000604707760] [c00000000063e5a4] migrate_vma_col
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
greybus: raw: fix use-after-free on cdev close
This addresses a use-after-free bug when a raw bundle is disconnected
but its chardev is still opened by an application. When the application
releases the cdev, it causes the following panic when init on free is
enabled (CONFIG_INIT_ON_FREE_DEFAULT_ON=y):
refcount_t: underflow; use-after-free.
WARNING: CPU: 0 PID: 139 at lib/refcount.c:28 refcount_warn_saturate+0xd0/0x130
...
Call Trace:
<TASK>
cdev_put+0x18/0x30
__fput+0x255/0x2a0
__x64_sys_close+0x3d/0x80
do_syscall_64+0xa4/0x290
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The cdev is contained in the "gb_raw" structure, which is freed in the
disconnect operation. When the cdev is released at a later time,
cdev_put gets an address that points to freed memory.
To fix this use-after-free, convert the struct device from a pointer to
being embedded, that makes the lifetime of the cdev and of this device
the same. Then, use cdev_device_add, which guarantees that the device
won't be released until all references to the cdev have been released.
Finally, delegate the freeing of the structure to the device release
function, instead of freeing immediately in the disconnect callback. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix data loss caused by incorrect use of nat_entry flag
Data loss can occur when fsync is performed on a newly created file
(before any checkpoint has been written) concurrently with a checkpoint
operation. The scenario is as follows:
create & write & fsync 'file A' write checkpoint
- f2fs_do_sync_file // inline inode
- f2fs_write_inode // inode folio is dirty
- f2fs_write_checkpoint
- f2fs_flush_merged_writes
- f2fs_sync_node_pages
- f2fs_flush_nat_entries
- f2fs_fsync_node_pages // no dirty node
- f2fs_need_inode_block_update // return false
SPO and lost 'file A'
f2fs_flush_nat_entries() sets the IS_CHECKPOINTED and HAS_LAST_FSYNC
flags for the nat_entry, but this does not mean that the checkpoint has
actually completed successfully. However, f2fs_need_inode_block_update()
checks these flags and incorrectly assumes that the checkpoint has
finished.
The root cause is that the semantics of IS_CHECKPOINTED and
HAS_LAST_FSYNC are only guaranteed after the checkpoint write fully
completes.
This patch modifies f2fs_need_inode_block_update() to acquire the
sbi->node_write lock before reading the nat_entry flags, ensuring that
once IS_CHECKPOINTED and HAS_LAST_FSYNC are observed to be set, the
checkpoint operation has already completed. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix double-free of tx_buf skb
If ice_tso() or ice_tx_csum() fail, the error path in
ice_xmit_frame_ring() frees the skb, but the 'first' tx_buf still points
to it and is marked as valid (ICE_TX_BUF_SKB).
'next_to_use' remains unchanged, so the potential problem will
likely fix itself when the next packet is transmitted and the tx_buf
gets overwritten. But if there is no next packet and the interface is
brought down instead, ice_clean_tx_ring() -> ice_unmap_and_free_tx_buf()
will find the tx_buf and free the skb for the second time.
The fix is to reset the tx_buf type to ICE_TX_BUF_EMPTY in the error
path, so that ice_unmap_and_free_tx_buf().
Move the initialization of 'first' up, to ensure it's already valid in
case we hit the linearization error path.
The bug was spotted by AI while I had it looking for something else.
It also proposed an initial version of the patch.
I reproduced the bug and tested the fix by adding code to inject
failures, on a build with KASAN.
I looked for similar bugs in related Intel drivers and did not find any. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix race condition in TX timestamp ring cleanup
Fix a race condition between ice_free_tx_tstamp_ring() and ice_tx_map()
that can cause a NULL pointer dereference.
ice_free_tx_tstamp_ring currently clears the ICE_TX_FLAGS_TXTIME flag
after NULLing the tstamp_ring. This could allow a concurrent ice_tx_map
call on another CPU to dereference the tstamp_ring, which could lead to
a NULL pointer dereference.
CPU A:ice_free_tx_tstamp_ring() | CPU B:ice_tx_map()
--------------------------------|---------------------------------
tx_ring->tstamp_ring = NULL |
| ice_is_txtime_cfg() -> true
| tstamp_ring = tx_ring->tstamp_ring
| tstamp_ring->count // NULL deref!
flags &= ~ICE_TX_FLAGS_TXTIME |
Fix by:
1. Reordering ice_free_tx_tstamp_ring() to clear the flag before
NULLing the pointer, with smp_wmb() to ensure proper ordering.
2. Adding smp_rmb() in ice_tx_map() after the flag check to order the
flag read before the pointer read, using READ_ONCE() for the
pointer, and adding a NULL check as a safety net.
3. Converting tx_ring->flags from u8 to DECLARE_BITMAP() and using
atomic bitops (set_bit(), clear_bit(), test_bit()) for all flag
operations throughout the driver:
- ICE_TX_RING_FLAGS_XDP
- ICE_TX_RING_FLAGS_VLAN_L2TAG1
- ICE_TX_RING_FLAGS_VLAN_L2TAG2
- ICE_TX_RING_FLAGS_TXTIME |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix potential NULL pointer deref in error path of ice_set_ringparam()
ice_set_ringparam nullifies tstamp_ring of temporary tx_rings, without
clearing ICE_TX_RING_FLAGS_TXTIME bit.
When ICE_TX_RING_FLAGS_TXTIME is set and the subsequent
ice_setup_tx_ring() call fails, a NULL pointer dereference could happen
in the unwinding sequence:
ice_clean_tx_ring()
-> ice_is_txtime_cfg() == true (ICE_TX_RING_FLAGS_TXTIME is set)
-> ice_free_tx_tstamp_ring()
-> ice_free_tstamp_ring()
-> tstamp_ring->desc (NULL deref)
Clear ICE_TX_RING_FLAGS_TXTIME bit to avoid the potential issue.
Note that this potential issue is found by manual code review.
Compile test only since unfortunately I don't have E830 devices. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: Fix ttm_bo_swapout() infinite LRU walk on swapout failure
When ttm_tt_swapout() fails, the current code calls
ttm_resource_add_bulk_move() followed by ttm_resource_move_to_lru_tail()
to restore the resource's bulk_move membership.
However, ttm_resource_move_to_lru_tail() places the resource at the tail
of the LRU list which, relative to the walk cursor's hitch node (placed
immediately after the resource when it was yielded), puts the resource
*in front of the* the hitch. The next list_for_each_entry_continue() from
the hitch finds the same resource again, causing an infinite loop.
Fix by deferring del_bulk_move to the success path only.
On the success path, TTM_TT_FLAG_SWAPPED has just been set by
ttm_tt_swapout() but the resource is still tracked in the bulk_move range,
so ttm_resource_del_bulk_move()'s !ttm_resource_unevictable() guard would
incorrectly skip the removal. Introduce
ttm_resource_del_bulk_move_unevictable() which bypasses that guard. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: put folios not suitable for writeback
The batch holds references to the folios (see `filemap_get_folios`,
`folio_batch_release`), so we need to `folio_put` the folios we remove.
Tested on v6.18. |
