| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability has been identified in SIMATIC CN 4100 (All versions < V2.5). Affected device consists of an incorrect default value in the SSH configuration. This could allow an attacker to bypass network isolation. |
| A vulnerability has been identified in SIMATIC CN 4100 (All versions < V2.5). Affected device consists of improper access controls in the configuration files that leads to privilege escalation. An attacker could gain admin access with this vulnerability leading to complete device control. |
| BACnet Protocol Stack library provides a BACnet application layer, network layer and media access (MAC) layer communications services. Prior to 1.5.0.rc2, The npdu_is_expected_reply function in src/bacnet/npdu.c indexes request_pdu[offset+2/3/5] and reply_pdu[offset+1/2/4] without verifying that those APDU bytes exist. bacnet_npdu_decode() can return offset == 2 for a 2-byte NPDU, so tiny PDUs pass the version check and then get read out of bounds. On ASan/MPU/strict builds this is an immediate crash (DoS). On unprotected builds it is undefined behavior and can mis-route replies; RCE is unlikely because only reads occur, but DoS is reliable. |
| iccDEV provides a set of libraries and tools that allow for the interaction, manipulation, and application of ICC color management profiles. Prior to version 2.3.1.3, there is a vulnerability IccCmm.cpp:5793 when reading through index during ICC profile processing. The malformed ICC profile triggers improper array bounds validation in the color management module, resulting in an out-of-bounds read that can lead to memory disclosure or segmentation fault from accessing memory beyond the array boundary. This issue has been patched in version 2.3.1.3. |
| Gogs is an open source self-hosted Git service. In version 0.13.3 and prior, due to the insufficient patch for CVE-2024-56731, it's still possible to update files in the .git directory and achieve remote command execution. This issue has been patched in versions 0.13.4 and 0.14.0+dev. |
| Edimax EW-7438RPn-v3 Mini 1.27 contains a remote code execution vulnerability that allows unauthenticated attackers to execute arbitrary commands through the /goform/mp endpoint. Attackers can exploit the vulnerability by sending crafted POST requests with command injection payloads to download and execute malicious scripts on the device. |
| Edimax EW-7438RPn-v3 Mini 1.27 is vulnerable to cross-site request forgery (CSRF) that can lead to command execution. An attacker can trick an authenticated user into submitting a crafted form to the /goform/mp endpoint, resulting in arbitrary command execution on the device with the user's privileges. |
| Homarr is an open-source dashboard. Prior to 1.52.0, a public (unauthenticated) tRPC endpoint widget.app.ping accepts an arbitrary url and performs a server-side request to that URL. This allows an unauthenticated attacker to trigger outbound HTTP requests from the Homarr server, enabling SSRF behavior and a reliable port-scanning primitive (open vs closed ports can be inferred from statusCode vs fetch failed and timing). This vulnerability is fixed in 1.52.0. |
| SandboxJS is a JavaScript sandboxing library. Prior to 0.8.31, a sandbox escape vulnerability allows sandboxed code to mutate host built-in prototypes by laundering the isGlobal protection flag through array literal intermediaries. When a global prototype reference (e.g., Map.prototype, Set.prototype) is placed into an array and retrieved, the isGlobal taint is stripped, permitting direct prototype mutation from within the sandbox. This results in persistent host-side prototype pollution and may enable RCE in applications that use polluted properties in sensitive sinks (example gadget: execSync(obj.cmd)). This vulnerability is fixed in 0.8.31. |
| SimpleImportProduct Prestashop Module v6.2.9 was discovered to contain a SQL injection vulnerability via the key parameter at send.php. |
| In the module "Product Catalog (CSV, Excel) Import" (simpleimportproduct) <= 6.7.0 from MyPrestaModules for PrestaShop, a guest can upload files with extensions .php. |
| MyPrestaModules Prestashop Module v6.2.9 and UpdateProducts Prestashop Module v3.6.9 were discovered to contain a PHPInfo information disclosure vulnerability via send.php. |
| Cursor is a code editor built for programming with AI. Sandbox escape via writing .git configuration was possible in versions prior to 2.5. A malicious agent (ie prompt injection) could write to improperly protected .git settings, including git hooks, which may cause out-of-sandbox RCE next time they are triggered. No user interaction was required as Git executes these commands automatically. Fixed in version 2.5. |
| Edimax EW-7438RPn-v3 Mini 1.27 allows unauthenticated attackers to access the /wizard_reboot.asp page in unsetup mode, which discloses the Wi-Fi SSID and security key. Attackers can retrieve the wireless password by sending a GET request to this endpoint, exposing sensitive information without authentication. |
| In JetBrains PyCharm before 2025.3.2 a DOM-based XSS on Jupyter viewer page was possible |
| In JetBrains Hub before 2025.3.119807 authentication bypass allowing administrative actions was possible |
| A physical attack vulnerability exists in certain Moxa industrial computers using TPM-backed LUKS full-disk encryption on Moxa Industrial Linux 3, where the discrete TPM is connected to the CPU via an SPI bus. Exploitation requires invasive physical access, including opening the device and attaching external equipment to the SPI bus to capture TPM communications. If successful, the captured data may allow offline decryption of eMMC contents. This attack cannot be performed through brief or opportunistic physical access and requires extended physical access, possession of the device, appropriate equipment, and sufficient time for signal capture and analysis. Remote exploitation is not possible. |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: t7xx: fix potential skb->frags overflow in RX path
When receiving data in the DPMAIF RX path,
the t7xx_dpmaif_set_frag_to_skb() function adds
page fragments to an skb without checking if the number of
fragments has exceeded MAX_SKB_FRAGS. This could lead to a buffer overflow
in skb_shinfo(skb)->frags[] array, corrupting adjacent memory and
potentially causing kernel crashes or other undefined behavior.
This issue was identified through static code analysis by comparing with a
similar vulnerability fixed in the mt76 driver commit b102f0c522cf ("mt76:
fix array overflow on receiving too many fragments for a packet").
The vulnerability could be triggered if the modem firmware sends packets
with excessive fragments. While under normal protocol conditions (MTU 3080
bytes, BAT buffer 3584 bytes),
a single packet should not require additional
fragments, the kernel should not blindly trust firmware behavior.
Malicious, buggy, or compromised firmware could potentially craft packets
with more fragments than the kernel expects.
Fix this by adding a bounds check before calling skb_add_rx_frag() to
ensure nr_frags does not exceed MAX_SKB_FRAGS.
The check must be performed before unmapping to avoid a page leak
and double DMA unmap during device teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
flex_proportions: make fprop_new_period() hardirq safe
Bernd has reported a lockdep splat from flexible proportions code that is
essentially complaining about the following race:
<timer fires>
run_timer_softirq - we are in softirq context
call_timer_fn
writeout_period
fprop_new_period
write_seqcount_begin(&p->sequence);
<hardirq is raised>
...
blk_mq_end_request()
blk_update_request()
ext4_end_bio()
folio_end_writeback()
__wb_writeout_add()
__fprop_add_percpu_max()
if (unlikely(max_frac < FPROP_FRAC_BASE)) {
fprop_fraction_percpu()
seq = read_seqcount_begin(&p->sequence);
- sees odd sequence so loops indefinitely
Note that a deadlock like this is only possible if the bdi has configured
maximum fraction of writeout throughput which is very rare in general but
frequent for example for FUSE bdis. To fix this problem we have to make
sure write section of the sequence counter is irqsafe. |
| In the Linux kernel, the following vulnerability has been resolved:
rocker: fix memory leak in rocker_world_port_post_fini()
In rocker_world_port_pre_init(), rocker_port->wpriv is allocated with
kzalloc(wops->port_priv_size, GFP_KERNEL). However, in
rocker_world_port_post_fini(), the memory is only freed when
wops->port_post_fini callback is set:
if (!wops->port_post_fini)
return;
wops->port_post_fini(rocker_port);
kfree(rocker_port->wpriv);
Since rocker_ofdpa_ops does not implement port_post_fini callback
(it is NULL), the wpriv memory allocated for each port is never freed
when ports are removed. This leads to a memory leak of
sizeof(struct ofdpa_port) bytes per port on every device removal.
Fix this by always calling kfree(rocker_port->wpriv) regardless of
whether the port_post_fini callback exists. |
